136,118 used machines on RESALE, but how to find them? Machine Search
Kat-No 08-1632 in very good condition HxLxW: 56x78x30 cm For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 All prices are ex works plus law VAT Intermediate sale reserved Freight cost share: by scope of delivery Delivery time: immediately from stock Sightseeing is also possible in the evening or on weekends by appointment.
Cat. No. 07-1268 in very good condition Type SEP 100.1 Design: H1 PO1 Dimensions: Length: 143 cm Width: 56 cm Height: 143 cm Capacity: 60 litres/min., 3600 l/h Pressure: 6 bar Engine power: 4 kW DN 65 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. Sightseeing is also possible in the evening and on weekends by appointment. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery
Kat. No. 11-3290 in a very good condition 5000 - 10,000 litres Measurements and weight: HxLxB: 75 x 130 x 30 cm weight: 85 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.
Oel-Diffusion pump Manufacturer: Leybold Type: DIP 50,000 Status: used Technical data Product: DIP 50000 Catalogue: 22240 Connection flange Suction side: DN 1000 ISO-F Connection flange Print side: DN 160 ISO-K Suction Below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l/s working range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 Torr Final pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 Torr Max. pre-vacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Equipment: Pump is delivered without equipment quantity of equipment min.: 12.0 l 12.7 qt max.: 25.0 l 26.4 qt grid connection: 3-ph Y, 400 V, 50/60 Hz Heating capacity: 24 kW Number of heating cartridges: 24 Heating time: < 30 min Number of cooling water circuits: 3 Cooling water minimum pump: 1500 l/h 6.6 gal/min Duesenhut steam barrier: 150 l/h 0.66 gal/min Max. Cooling water pressure: 6 bar 87 psi Cooling water connection pump: 1/ ...
Oil diffusion pump Manufacturer: Leybold type: DIP 50,000 Status: used Technical data Product: DIP 50000 cat. No.: 22240 Suction side connection flange: DN 1000 ISO-F Connection flange printed page: DN 160 ISO-K Pumping speed for air below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l / s Working range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 Torr Final total pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 Torr Maximum permissible forevacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Resources: Pump delivered without resources Amount of resources min: 12.0 l 12.7 qt Max: 25.0 l 26.4 qt Power supply: 3-ph Y, 400 V, 50/60 Hz Heating power: 24 kW Number of cartridges: 24 Heating-up time: < 30 min Number of cooling circuits: 3 Minimal cooling water Pump: 1500 l / h 6,6 gal / min Jets Hat vapor barrier: 150 l / h 0.66 gal / min Cooling water pressure: 6 ba ...
Warman ®, AH, ® pump, AH, 4/3 from the cyclone supply up to regrinding, Flotation and departures is the Warman ®, AH, ® pump the best choice. 3 pumps are available!
Horn pump Cabinet consisting of: -2 x Horn pump MP 5 (700 l / min) -&gt; For heating oil, diesel and bio-diesel Technical data: Max capacity: 700 l / min Supply voltage: 400 / 50 V / Hz Capacity: 2, 5kW Inlet: DN 80 Pressure connection: DN 80 Maximum suction height: 4, 5 m Protection class: IP 44 Pump Cabinet is painted and fully functional! The pumps can be expanded like at extra charge out of the closet, but we would prefer a sale as a complete package!
Status: New Manufacturer: Pfeiffer Type: TMH 064 Mod.-Nr.: PM P02 366 Remark To operateonly with appropriate pre pump and control. delivery time: on request; ready for use
Screw Vacuum Pump - Unused Manufacturer: Alcatel / Adixen Type: A 300 P Motor: 380-460V Status: Used; As Performance: 12 months Suction power: 320 m3/h connection: ISO-K 63 final pressure: approx. 1.2x10-2 mbar (abs.) Including: user manual ; ready for use
Claw vacuum pump dry compression Manufacturer: Busch Type: Mink MM 1402 AV Motor: DS 400V suction power: 400 m3/h Final pressure: approx. 200 mbar (abs.) Zubehoer: Operating instructions delivery time: by arrangement; ready for use
Side channel pump, delivery pump -self-priming pump -Coupling Order No.: 32175/90
Waelz piston pump booster Manufacturer: Busch Type: Panda WV 0500 C/B and Panda WV 1000 C/B available suction swells: 500 - 1000 m3/h Performance: 12 months Status: Generalueberholt Delivery time: by arrangement; ready for use
Locking valve vacuum pump DK200 Status: Generalueberholt Gewaehrleistung: 12 months Manufacturer: Leybold Type: DK200 Engine rated power: 5.5KW nominal suction digesters: 200m3/h Final pressure without gasb.: small 5x10e-3 Zubehoer: Operating instructions with spare parts list
Rotary vane vane vacuum pump- packaging Manufacturer: Busch Type: 251-512 Status: used, tested! Inclusive: Oil filling delivery time: from stock!; ready for use
System: piston diaphragm pump Manufacturer: Abel Type: FDG 322 Machine number: 3506 Year of construction: 1989 Performance: 15 m3 Pressure: 15 bar Engine: BBC, 11 kW, 50 Hz
System: piston diaphragm pump Manufacturer: Abel Type: CM G E272 Manufacturer no.: 10074 Construction year: 2013 Performance: 15 m3/h Pressure: 1.00 MPa Motor: 7,5 kW, 50 Hz
System: used piston diaphragm pump / pump Type: HMD-G-50-500 Flow rate: 40.0 m3/h Pressure: 1,6 MPa
Waelz Piston Pump Booster Vacuum Pump Manufacturer: Busch Typ: Panda WV 4500 B Suction plugs: 4100 m3/h Vacuum: Pre-pump output Gewawting capacity: 12 months Status: as good as new, reserve device; ready for use
Oil- steam jet pump similar to oil diffusion pump Manufacturer: Leybold - Heraeus Type: OB 8000B Condition: used, removed from running plant!
Busch two-stage pump level: Data Pump status: Type: BNV 1000 A Vacuum: 0.005 mbar (abs.) data Pre-pump: Type: NC0400B Suction volume: 400m3/h End pressure: 0.05mbar (abs.) Data Booster: Type: WV1000B Suction power: 1000m3/h End pressure: 0.005mbar (abs.) Condition: tested, maintained (good condition) Including: vacuum pre-filter, oil filling Performance: 3 months; ready for use
Leybold pump level Data on pump level: RUTA - Pump system RUTA 1001 (20900895586) (02209= Pre-pump: Leybold Sogevac SV300 Cat: 109 31 booster pump: Leybold Ruvac WAU1001 Kat: 11741 Condition: The pump level is completely cleaned and repainted and tested according to the manufacturer's specifications and is 100% fine, without oil leak Performance: 3 months 22x SV300 +WSU1001H are available! There are 10x SV300 + WAU1001 verguegable! ; ready for use
Roller piston vacuum pump Manufacturer: Leybold Type: RA 7000 Status: used Performance: without suction pumps: 7000m3/h lifting agent: mineraloil Delivery time: ex stock
Roots vacuum pump Manufacturer: Leybold Type: RA 7000 Status: used Warranty: without Suction capacity: 7000 m ³/h Beriebsmittel: Mineral oil Delivery time: In stock
Waelz Piston Pump Booster Vacuum Pump Manufacturer: Busch Typ: Puma WP 1000 D2 Status: used, tested A complete recovery can be offered as an alternative. Then with 12 months of service to the geraet.; ready for use
LEYBOLD pump level data to the pump status: RUTA - RUTA 1001 (20900895586) Pumpenystem (= 02209 Backing pump: LEYBOLD Sogevac SV300 Cat: 10931 Booster pump: Leybold Ruvac WAU1001 Cat: 11741 Condition: to see in Picture 3-6. The pump stand is completely clean newly painted and serviced in accordance with the manufacturer's specifications and tested and is 100% right, no oil leak Warranty: 3 months There are 2 x SV300 + WSU1001H available! There are 10 x SV300 + WAU1001 verguebar! Price refers to 1 PCs.; ready for operation
Roots pump booster pump Manufacturer: Busch Type: Panda WV 4500b Suction capacity: 4100 m ³/h Vacuum: Vorpumpenabhaengig Warranty: 12 months Status: New, reserve unit; ready for operation
Claw vacuum pump Compressing dry Manufacturer: Busch Type: Mink MM 1402 AV Engine: DS 400V Suction power: 400 m ³/h Discharge pressure: approx. 200 mbar (abs.) Accessories: inlet filter; Operating instructions Delivery time: Please enquire; ready for operation
Block vane pump DK200 Status: Rebuilt Warranty: 12 months Manufacturer: Leybold Type: DK200 Rated motor power: 5,5KW Nominal: 200m ³/h Final pressure without GASB.: small 5x10e-3 Accessories: operating instructions spare parts list Delivery: in the short term; ready for operation
Roots pump booster pump Manufacturer: Busch Type: Puma WP 1000 D2 Status: used, tested A complete overhaul can be offered as an alternative. Then with 12 months warranty on the device.; ready for operation
Rotary vane vacuum pump packing Manufacturer: Busch Type: 251-512 Status: used, tested! Including: oil filling Delivery time: In stock!; ready for operation
Roots blowers Manufacturer: Leybold Type: RUVAC WSU 2001 Cat.-No.: 11741 Suction capacity: approx. 2000 m ³/h Status: Rebuilt Warranty: 12 months (image); ready for operation
Status: As good as new Manufacturer: Pfeiffer Type: TMH 064 Model No.: PM P02 366 Comment To operate only with appropriate backing pump and control. Shipping time: On request; ready for operation
Bush two stage pumps stand: data pump status: type: BNV 1000 A Vacuum: mbar (abs.) 0.005 Data backing pump: Type: NC0400B suction volume: 400 m³/h Discharge pressure: 0, 05mbar (ABS) Data booster: Type: WV1000B Suction power: 1000 m ³/h Discharge pressure: 0, 005mbar (ABS) Condition: tested, serviced (good condition) Includes: vacuum pre-filter, oil filling Warranty: 3 months; ready for operation
Sludge feed pump rotary piston pump PL100 Börger Product no.: RE-HU-2019-0701-PK32 System: rotary piston pump sludge feed pump Manufacturer: Börger Type: Pl 100 Speed: 50-700 rpm Flow rate: 2.5 to 38 m3/h Pressure: 12 bar
- very well used and refurbished rotary vane vacuum pump - oil-sealed two-stage fine vacuum pump - Suction speed: approx. 18 m3/h, final pressure: 5x10E-3 mbar
brand new pump / tank column / data acquisition / diesel tank system Type eco 55 - not calibrated, Capacity up to approx. 55 l/min. suitable for diesel fuel, incl. - Tank machine with PC software (2,000 users) - 2 driver/vehicle identification system - Identification via transponder technology - USB interface for data retrieval - Wing cell pump with single-phase asynchronous motor - 230 volts - Oval wheel counter with pulse generator, accuracy = approx. +/- 0.5% - Inclined seat filter / dirt filter with fine sieve - 4 m dispensing hose DN 19 with type-approved automatic tap valve, incl. swivel joint and tap hose holder - Suction height approx. 3.5 m - Robust powder-coated steel plate housing Dimensions: approx. 1,410 x 520 x 275 mm - two-line, illuminated monochrome display, font height 8 or 19 mm - Tank data storage for up to 10,0 ...
Diodes Pump arrangement / pump chamber for FOBA DP50/FD84 New laser diodes with optimized water cooling, thus longer running times, excellent beam quality, higher laser outputs adjustable 6 months warranty, from the 6th to the 12th month pro rata Article-No. MA-103068 Data sheet with laser characteristic curve Delivery: EXW, collection possible VAT will be shown
Hydraulic pump unit Part Number : Moog - D954Z8001 Arburg - A10VDC 18 DFR1/31R The spare part is in good condition nevertheless, this is a used items, which has slight signs of wear, or may have.
Spiral housing Centrifugal pump Manufacturer: Allweiler Type: NT40-160 Diameter: 136mm 30m³/h H: 30m 3500 rpm Electric motor: Manufacturer: Siemens Type: 1LAZ1302AA90-Z 6.3kw NEW, from warehouse resolution for more information see pictures.
Hydraulic pump / hydrostatic pump Manufacturer : Eaton Type : 5422-034 0308026144 CW 0046435916 Further information can be found on the manufacturer's page, or on the type plate, see pictures. Condition: New, may have stock traces, comes from stock. Scope of delivery : see the pictures.
Injection pump diesel pump JCB Stanadyne A3 DB4429-6101 Condition: as good as new (test run ex works) Manafacture: Stanadyne Part Number: A3 DB4429-6101 JCB number: 320/0674 On sale are 40 injection pumps from 2012 to 2020. The pumps were subjected to a test run at the factory. When we arrived at our premises, they were staked out, dismantled and stored.
Centrifugal pump, water pump, stainless steel pump, food pump, peripheral wheel pump -Manufacturer: SAWA-Schmidhauser, centrifugal pump peripheral wheel pump -Type: F30/50 -Motor: Fig 1.50 kW / 2850 rpm -Dimensions: 480/210/H190 mm -Weight: 30 kg
Variable displacement pump, axial piston helical axis design, for hydrostatic drives in open circuit. Mannesmann Rexroth Replica, New Part The flow rate is proportional to the drive speed and the delivery volume and is infinitely variable at constant drive speed. Manufacturer: Zhen Yuan Model No.: A7VO355DR/63R-VPH02 Year of manufacture: 2023 Nominal size 0-355 cm³ Actuator: Pressure regulator Flow volume 355 cm³ Max. speed 1320
Hydraulic pump Variable displacement pump Manufacturer:- Model: DMVA G 215-080 SD 1 W 31 1 A 0 0 S0 0 The part is technically in good condition, Nevertheless, this is a used items, which shows signs of wear or may have. see pictures for more details.
Hydraulic pump Variable displacement pump Manufacturer:- Model: DMVA G 215-080 SD 1 W 31 1 A 0 0 S0 0 The part is technically in good condition, Nevertheless, this is a used items, which shows signs of wear or may have. see pictures for more details.
Hydraulic pump Variable displacement pump Manufacturer: Rexroth Model: A6VM 55 HD2 / 63W - VZB027B The pump is NEW and fully functional. see pictures for more details.
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, wastewater pump -Dirty water pump: for coarse grit -Drive: 15 kW 980 rpm -Max. flow rate: m³/h -Max. delivery head: m -Dimensions: 1140/470/H505 mm -Weight: 331 kg
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, wastewater pump -Dirty water pump: for coarse grit -Drive: 11 kW 1470 rpm -Max. flow rate: m³/h -Max. delivery head: m -Dimensions: 940/400/H425 mm -Weight: 169 kg
maximum number of results exceeded
please refine your search
