gear motor used for sale

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -The two-motor HOMAG profile milling units ensure corner rounding even when processing veneer -for rounding edges on the front and rear edges of the workpiece and at the bottom -each 2x corner copying units -2x engines Perske -Power: 0.3 KW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -Dimensions: 780/470/H340 mm -Weight: 52 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG cutting unit for cutting off edge protrusions on the front and rear edges -with heavy leadership -Milling unit: swiveling -1x Perske motors -Engine Type: -Power: 0.75 kW -Voltage: Volts -Frequency: 300 Hz -Speed: 8,600 rpm -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 940/620/H350 mm -Weight: 54 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG cutting unit for cutting off edge protrusions on the front and rear edges -with heavy leadership -Milling unit: swiveling -1x Perske motors -Engine Type: -Power: 0.75 kW -Voltage: Volts -Frequency: 300 Hz -Speed: 8,600 rpm -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 990/620/H340 mm -Weight: 52 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG cutting unit for cutting off edge protrusions on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x Perske engines -Engine Type: -Power: 0.22 kW -Voltage: Volts -Frequency: Hz -Speed: 18,000 rpm -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 1240/600/H1100 mm -Weight: 296 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x Perske motors -Engine type: KCS 70.12-2D -Power: 3.0/4.4 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2860/5860 rpm -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 1100/600/H1330 mm -Weight: 340 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x Perske motors -Engine type: KCS 70.12-2D -Power: 2.7/4.5 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2860/5860 rpm -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 1060/660/H1010 mm -Weight: 326 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit allows you to pre-mill the upper and lower edge overhang -with keying: from 1 side each -1x engines Perske -Power: 1.125 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -1x engines Perske -Power: 1.5 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 500/340/H600 mm -Weight: 50 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying: from 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.6 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 650/450/H600 mm -Weight: 74 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying: from 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.3 kW -Voltage: volts -Frequency: Hz -Speed: 18000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 520/470/H600 mm -Weight: 64 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying: from 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 2.2 kW -Voltage: volts -Frequency: Hz -Speed: 17630 rpm -Other engines with other services in stock for an additional charge -Dimensions: 740/470/H600 mm -Weight: 82 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller, servo module, stepper motor driver -Manufacturer: Oriental Motor, 2-phase stepping motor driver stepper motor driver unused original packaging -Type: CSD2120-T -Dimensions cardboard: 140/90/H70 mm -Weight: 0.2 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -Number: 2 x motors Perske -Power: 0.15 kW -Voltage: 133 volts -Frequency: 200 Hz -Speed: 11,160 rpm -Other engines with other services in stock for an additional charge -Dimensions: 470/400/H620 mm -Weight: 55 kg

Aggregate kit, format processing unit, chipping unit, milling unit, form milling unit, jointing milling unit, trimming unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motor -Milling units: pivoting -Engine: Perske DVMS 903/2 -Power: 0.40 kW -Frequency: 200 Hz -Speed: 12000 rpm -Dimensions: 440/380/H595 mm -Weight: 56 kg

Aggregate kit, format processing unit, chipping unit, milling unit, form milling unit, jointing milling unit, trimming unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motors -Milling units: pivoting -Engine: 2 x Perske DVMS 903/2 -Power: 0.4 kW -Frequency: 200 Hz -Speed: 12000 rpm -Number: 1x milling unit available -Dimensions: 480/380/H590 mm -Weight: 69 kg

Aggregate kit, format processing unit, chipping unit, milling unit, form milling unit, jointing milling unit, trimming unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motor -Milling units: pivoting -Engine: Perske DKNS 502/2 -Power: 0.15 kW -Frequency: 200 Hz -Speed: 10400 rpm -Dimensions: 480/360/H595 mm -Weight: 60 kg

Aggregate kit, format processing unit, chipping unit, milling unit, form milling unit, jointing milling unit, trimming unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motors -Milling units: pivoting -Engine: 2 x Perske DVMS 903/2 -Power: 0.4 kW -Frequency: 200 Hz -Speed: 12000 rpm -Number: 1x milling unit available -Dimensions: 490/370/H610 mm -Weight: 53 kg

Modular unit kit, format processing unit, chipping unit, milling unit, form milling unit, jointing milling unit, trimming unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motors -Milling units: pivoting -Engines: 2 x Perske VS 42.20-2 -Power: 1.85 kW -Frequency: 200 Hz -Speed: 11575 rpm -Number: 2x milling unit available -Price: per piece -Dimensions: 500/430/H650 mm -Weight: 86 kg/piece

Aggregate kit, format processing unit, chipping unit, milling unit, form milling unit, jointing milling unit, trimming unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motor -Milling unit: with guide -Engine: Perske VS 31.09-2 -Power: 0.4 kW -Frequency: 200 Hz -Speed: 11300 rpm -Number: 2x milling unit available -Price: per piece -Dimensions: 600/360/H310 mm -Weight: 20 kg/piece

Aggregate kit, format processing unit, chipping unit, milling unit, form milling unit, jointing milling unit, trimming unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motors -Milling units: pivoting -Motors: 2 x Perske DKNS 502/2 -Power: 0.15 kW -Frequency: 200 Hz -Speed: 10400 rpm -Number: 1x milling unit available -Dimensions: 470/410/H600 mm -Weight: 60 kg

Aggregate kit, format processing unit, chipping unit, milling unit, form milling unit, jointing milling unit, trimming unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motors -Milling units: pivoting -Engines: 2 x Perske VS 31.09-2 / DVMS 903/2 -Power: 0.4 kW -Frequency: 200 Hz -Speed: 11300 rpm -Number: 1x milling unit available -Dimensions: 490/380/H610 mm -Weight: 49 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motors -Milling units: with guide -Engines: 2x Perske VS 40.09/2 -Power: 0.26 kW -Voltage 220/380 V 50 Hz -Speed: 2660 rpm -Quantity: 1x milling unit available -Dimensions: 750/270/H300 mm -Weight: 40 kg

Speed control unit, speed controller, controller, motor controller, motor control, motor controller -Manufacturer: Oriental Motors, Motor control unit Motor controller -Type: BMUD 120-C2 -Quantity: 1x controller available -Dimensions: 135/60/H100 mm -Weight: 0.4 kg

Description Pneumatic altar fold/window fold pocket 56 cm with Acc 2.4 control unit and photoelectric sensor for Heidelberg KH and TH folding machines with motorized pocket adjustment Digital control with ACC 2.4 for exact determination of switching times Up to 15,000 cycles per hour Minimum flap spacing of 0.5-1 mm depending on paper thickness

ID3774 MRS 8 cbm – Motorised two-shell grab year/Baujahr 1998 6.5 t 8 cbm Motorised two-shell grab with electro-hydraulic drive 8 cbm Engine Clamshell Grab with Electro-Hydraulic Drive

The Hidrostal Betsy 100GG (popularly known as eekels pump) has been a great success for years! Main reason for this: plenty of dirt passage, pumps thick liquids with solid particles, high yield versus exceptionally low engine power, sucks in very quickly and up to a large suction height (8.5 meters) clogging-free, wear-resistant screw centrifugal impeller, can slop and can run dry, Machine can be used as:, the pumped sludge, keeping sewers and cellars dry, wherever suction and slobbering really needs to be done emergency pump unit for fire brigade, water boards and, Water purifications, pumping surface water, keeping construction pits and construction trenches dry, MAX capacity: 139m3/h at 1500RPM, 172m3/h at 1800RPM, MAX Head: 16mwk at 1500RPM, 24mwk at 1800RPM, MAX dirt passage: 75mm, Please call or email us, we will be happy to help you., , Throughput capacity: 135 m3/h, Max dirt pa ...

The Hidrostal Betsy 100GG (popularly known as eekels pump) has been a great success for years! Main reason for this: plenty of dirt passage, pumps thick liquids with solid particles, high yield versus exceptionally low engine power, sucks in very quickly and up to a large suction height (8.5 meters) clogging-free, wear-resistant screw centrifugal impeller, can slop and can run dry, Machine can be used as:, the pumped sludge, keeping sewers and cellars dry, wherever suction and slobbering really needs to be done emergency pump unit for fire brigade, water boards and, Water purifications, pumping surface water, keeping construction pits and construction trenches dry, MAX capacity: 139m3/h at 1500RPM, 172m3/h at 1800RPM, MAX Head: 16mwk at 1500RPM, 24mwk at 1800RPM, MAX dirt passage: 75mm, Please call or email us, we will be happy to help you., , Throughput capacity: 135 m3/h, Max dirt pa ...

The Hidrostal Betsy 100GG (popularly known as eekels pump) has been a great success for years! Main reason for this: plenty of dirt passage, pumps thick liquids with solid particles, high yield versus exceptionally low engine power, sucks in very quickly and up to a large suction height (8.5 meters) clogging-free, wear-resistant screw centrifugal impeller, can slop and can run dry, Machine can be used as:, the pumped sludge, keeping sewers and cellars dry, wherever suction and slobbering really needs to be done emergency pump unit for fire brigade, water boards and, Water purifications, pumping surface water, keeping construction pits and construction trenches dry, MAX capacity: 139m3/h at 1500RPM, 172m3/h at 1800RPM, MAX Head: 16mwk at 1500RPM, 24mwk at 1800RPM, MAX dirt passage: 75mm, Please call or email us, we will be happy to help you., , Throughput capacity: 135 m3/h, Max dirt pa ...

The Hidrostal Betsy 100GG (popularly known as eekels pump) has been a great success for years! Main reason for this: plenty of dirt passage, pumps thick liquids with solid particles, high yield versus exceptionally low engine power, sucks in very quickly and up to a large suction height (8.5 meters) clogging-free, wear-resistant screw centrifugal impeller, can slop and can run dry, Machine can be used as:, the pumped sludge, keeping sewers and cellars dry, wherever suction and slobbering really needs to be done emergency pump unit for fire brigade, water boards and, Water purifications, pumping surface water, keeping construction pits and construction trenches dry, MAX capacity: 139m3/h at 1500RPM, 172m3/h at 1800RPM, MAX Head: 16mwk at 1500RPM, 24mwk at 1800RPM, MAX dirt passage: 75mm, Please call or email us, we will be happy to help you., , Throughput capacity: 135 m3/h, Max dirt pa ...

The Hidrostal Betsy 100GG (popularly known as eekels pump) has been a great success for years! Main reason for this: plenty of dirt passage, pumps thick liquids with solid particles, high yield versus exceptionally low engine power, sucks in very quickly and up to a large suction height (8.5 meters) clogging-free, wear-resistant screw centrifugal impeller, can slop and can run dry, Machine can be used as:, the pumped sludge, keeping sewers and cellars dry, wherever suction and slobbering really needs to be done emergency pump unit for fire brigade, water boards and, Water purifications, pumping surface water, keeping construction pits and construction trenches dry, MAX capacity: 139m3/h at 1500RPM, 172m3/h at 1800RPM, MAX Head: 16mwk at 1500RPM, 24mwk at 1800RPM, MAX dirt passage: 75mm, Please call or email us, we will be happy to help you., , Throughput capacity: 135 m3/h, Max dirt pa ...

The Hidrostal Betsy 100GG (popularly known as eekels pump) has been a great success for years! Main reason for this: plenty of dirt passage, pumps thick liquids with solid particles, high yield versus exceptionally low engine power, sucks in very quickly and up to a large suction height (8.5 meters) clogging-free, wear-resistant screw centrifugal impeller, can slop and can run dry, Machine can be used as:, the pumped sludge, keeping sewers and cellars dry, wherever suction and slobbering really needs to be done emergency pump unit for fire brigade, water boards and, Water purifications, pumping surface water, keeping construction pits and construction trenches dry, MAX capacity: 139m3/h at 1500RPM, 172m3/h at 1800RPM, MAX Head: 16mwk at 1500RPM, 24mwk at 1800RPM, MAX dirt passage: 75mm, Please call or email us, we will be happy to help you., , Throughput capacity: 135 m3/h, Max dirt pa ...

gear motor, electric motor, servo gear motor -Manufacturer: SEW-Eurodrive, servo gear motor type RF27 CMP63M/KY/AKOH/SM1 -Gearbox:Type RF27 455 rpm i 6.59 -Motor: Type CMP63M/KY/AKOH/SM1 -Power: 3.30 Nm -Speed: 0 - 3000 rpm -Shaft: Ø 25 x 50 mm -Dimensions: 465/140/H170 mm -Weight: 10.5 kg

Electric motor, electric motor SIEMENSDrehstrom motor, power motorType 3LE16012BB233GB4Type V1Size 225MMotor speed 1475 rpm. Current consumption 84 AmpereMotor power 45 kWNet connection 400 Volt, 50 Hz.Shaft diameter 60 mmShaft pin length 140 mmKeyway width in the shaft 18 mmFlange diameter 450 mmCentering diameter 350 mmBolt circle 400 mmFlange motor with 8 mounting holes 18 mmLength motor housing without motor shaft 715 mmLength motor housing with

Electric motor, electric motor LAMMERSDrehstrom motor, power motorType 1TZ95012AA434AB4-ZBilform B3Size 200LMotor speed 2960 rpm. Current consumption 54 AmpereMotor power 30 kWNet connection 400 Volt, 50 Hz.Shaft diameter 55 mmShaft pin length 110 mmKeyway width in the shaft 16 mm- Foot motor with 4 mounting holes 19 mm, hole spacing 315 x 300 mmOverall length motor housing without motor shaft 620 mmOverall length motor housing with motor shaft 730 mmSpace requirement L x W x H 730 x 400 x 520

Drive motor, DC servo motor LENZE type GFQUBT 112-22Spindle motor, electric motorSeries No. 0239398K Year of manufacture: 1993Nominal power: 6 kWook voltage: 400 DCNenncurrent: 18 ampereMaximum speed: 1000 rpm. Excitation voltage: 210 VDCEexciter current: 3.4 ampereShaft diameter: 38 mm (shaft with 10 mm key)Shaft length: approx. 76 mm (shaft protrusion from centering edge)Centering flange diameter: 230 mmBolt circle diameter: 264 mm, 4x 14 mm holesLonglife speedometer HÜBNER type TDP 0.2 LT-4Speedometer voltage: 60V / 1000

Crane Motor, Travel Drive Crane Bridge Drive with GearSliding Armature Motor, Thrust Bencher Motor, Three-Phase Electric Motor, Brake Motor, Crane Motor, Rope Hoist Drive, Crane Drive, Lifting Motor, Fine Stroke MotorManufacturer: DEMAGMotor Type: 24/10 KF8-2Motor No.: 982869Motor Design: B5Rated Voltage: 380 VAC Rated Frequency: 50 HzPower Level 1: 0.58 kW = 715 rpm. Power level 2: 2.3 kW = 2900 rpm.with gearbox DEMAG type KS 12Reduction gearboxFabr. No. 1909104Translation: i = 118with impeller for crane rail2 pieces available,

Interchangeable gears/gears This 32-piece steel interchangeable wheel set consists of: Gears with the number of teeth from 20 - 149 Auction-ID: A1-47017-28

Interchangeable gears/gears This 32-piece steel interchangeable wheel set consists of: Gears with the number of teeth from 20 - 149

Geared motor, electric motor, electric geared motor, three-phase synchronous motor -Manufacturer: Sew-Eurodrive, geared motor servo motor -Gearbox: Type KHF47/A 11 rpm i 131.87 -Motor: Type CMP71S/PK/RH1M/SM1 -Speed: 0 - 2000 rpm -Design: B5 -Hollow shaft: Ø 35 x 175 mm -Protection class: IP 65 -Dimensions: 600/205/H210 mm -Weight: 33 kg

Bevel helical gearboxes Manufacturer : Bonfiglioli Model : A 504 UH50 P90 LOE engine: Euromotori 1,1kw MS9016Year of construction 2008 NEW, unused from old stock for more information see pictures.

Spindle motor, electric motor Manufacturer: Baumüller Type: GNAF 132 MV Leistubg: 26kW Rotational speed 1600-3000 rpm 76A 400V

Spindle motor, electric motor Manufacturer: Baumüller Type: GFSG 71 M Leistubg: 2.9 kW Rotational speed 2000 rpm 20.4 A 155 V

Lammers 16 BG 223-4MA66-Z 225M Electric motor 45 kW Manufacturer: Lammers Type: 16 BG 223-4MA66-Z 225M Nominal power : 45 kW Speed: 1475 rpm Voltage: 3 x 400/690 V Amps: 80 A Frequency: 50/60 Hertz Degree of protection: IP55 Weight: 315 kg More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Hidraulik motor Axial piston motor Type: A2FE56/61W-VZL106 NEW and fully functional, from stock, see pictures for more details.

Vibrating motor / vibration motor Manufacturer: Friedrich SKU: FTKX 1750-6-7 5.6kW The spare part is in good condition Nevertheless, this is a used items, which shows signs of wear, or may have. see pictures for more details.

Suitable for Yanmar VIO 75 mini excavator/Nabtesco, model MSP 00 2609

Drive motor, DC servo motor LENZE type GFQBT 80-24Spindle motor, electric motor, main spindle motorSeries No. 184592 Year of construction: 1993Nominal power: 4.2 kWook voltage: 260 V DCNoth current: 20 ampereMaximum speed: 3000 rpm. Excitation voltage: 200 V DCexcitation current: 1.15 ampere electric brakeShaft diameter: 24 mm (shaft with 8 mm key)Shaft length: approx. 47 mm (shaft protrusion from centering edge)Centering flange diameter: 110 mmBolt circle diameter: 130 mm, 8 x M8 threaded encoder, speedometer, GBR

DC shunt motor, main spindle motor, servo motor, DC motor, DC motorSIEMENS type 1GG5134-0WH46-6HU7-ZNow power: 22.5 kWook voltage: 38 to 380 volts DCNenn current: 67 ADore number: 50 - 2160 / 4050/5000 rpmShaft diameter: mmShaft pin length: mmKeyway width in the shaft: mm- Foot motor with 4 mounting holes- with mounted external fanOverall dimension L x W x H: approx. 700 x 580 x 350 mmWeight: approx. 250 kgThe drive motor is still ready for operation in a Guild Master GDM42. The

Vibraton motor, 4.5 kW, FY1000-6-7.0, Vimarc, used - refurbished Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional,- Please note: The engine has been fully reconditioned by the manufacturer! - Max. CF 5370 kg, - 230/400 V - 271 kg Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of di ...

Gearmotor Bauer DK940 AH/241 - used - MANUFACTURER´S DATA Bauer DK940 AH/241 output: 2,0 PS Motor speed: 1400/121U/min tension: 380Δ/Y protection class: IP65 shaft: 25mm CONDITION+HISTORY • operational standby-motor out of a company breakdown • shaft rotates, no further operation tests • condition see photos INSPECTION Motor can be inspected at any time. TERM´S OF DELIVERY Ex works DE - 83395 Freilassing, free on truck. COLLECTION By agreement Please feel free to contact us for any further questions! Project Organisation Alexander Torlach GmbH Breslauer Str. 41a 83395 Freilassing phone: +49(0)8654-77669-0 fax: +49(0)8654-77669-15 info@torlach