gear milling used for sale

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 48 mm / height 150 mm -Dovetail: 140 to 115 mm 22 mm high -Dimensions: see technical drawing in the photos -Dimensions: 215/80/H210 mm -Weight: 6.8 kg

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 40 mm / height 108 mm -Dovetail: 79 to 59 mm 15 mm high -Dimensions: see technical drawing in the photos -Dimensions: 140/73/H155 mm -Weight: 3.6 kg

Tool holder, milling holder, milling tool, long milling arbor, mounting bracket -Milling chuck: SK50 chuck -Type: 50 x 50 x 630 mm -Shaft: Ø 27 mm / Sleeves Ø 40/85 mm see photos -Dimensions: Ø 100 x 835 mm -Weight: 23.5 kg

Table unit from a DROOP & REIN portal milling machineClamping plate with T-slots made of cast steel-gray cast ironTable unit with clamping plate and very solid guidewayTable clamping surface 5500 x 2000 mmTravel distance of the table clamping plate approx. 3100 mmTable height-height 1050mmTable load: max. 20 ton. Ball screw: 100 mmThread pitch: 20 mm (single)- Machining table very stable on the bed- Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine- Longitudinal table movement over

Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping -Fine adjustment via spindles and handwheels

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 34338 Year of construction approx. 1965Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 200 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stagesMotor power 1.0 and 1.5 kW pole-switchableMains connection 380 volts, 50 Hz- 3-axis digital display HEIDENHAIN, type VRZ 753 B- Spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 1.5 kW 2840 rpm at 50 Hz -Shaft mounting: Ø 15 mm -Weight: 12 kg

Univ. NC Tool Milling Machine KUNZMANN Type WF 3/4Masch. No. 341020 Year of construction 1998Travel distances X: 400 mm Y: 320 mm Z: 400 mmTable size 650 x 350 mmSpindle holder SK 40Spindle speed 40 - 2500 rpm. Feeds X, Y and Z axis 0 - 1000 mm/min. infinitely variableRapid traverse X, Y axis 4000 mm/min. Rapid traverse Z-axis 3000 mm/min. Quill adjustment vertical 60 mmDrive power Spindle motor 3 KWnet connection 400 volts, 50 Hz- CNC line control Heidenhain TNC 124- Spindle speed via 2 gear stages and

Radius/flush milling machine, edge milling machine, edge router, shaped parts milling machine For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inside and outside radii. -Built-in milling cutters: 30° -Dimensions: 1000/600/H1450 mm -Weight: 60 kg

Double-end tenoner, edge processing machine, flush trim router bit, edge router bit, spindle motor, milling motor -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz -Motor: mounted on guides -Motors: swiveling -Cutter: with indexable inserts -3x consoles: each with 2 motors Price: per piece -Weight: 60 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power: 0.4 kW at 12000 rpm at 200 Hz -Power: 0.60 kW at 16500 rpm at 300 Hz -with indexable insert milling cutter -Number: 3x motors available Price: per piece -Weight: 6 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 2740 rpm at 50 Hz -Shaft mounting: Ø 20 mm/M16 mm -Motor: mounted on guides -Travel distance: 160 mm -Weight: 30 kg

A CNC 4-axis wet processing machine (dental milling machine) vhf of the first generation is available. Axes: 4, speed: 60000rpm, max. block dimensions X/Y/Z: 45mm/20mm/20mm, repeat accuracy: +/-3µm, axis of rotation: 200°, materials: glass ceramic/zirconium/composite/titanium/CoCr. Machine dimensions X/Y/Z: approx. 365mm/460mm/475mm, weight: approx. 50kg. Documentation available. On-site inspection is possible.

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Motor: 4.4 kW 2890 rpm at 50 Hz -Motor: 6.6 kW 5890 rpm at 100 Hz -Shaft mount: Ø 35 mm -Dimensions: 550/180/H200 mm -Weight: 40 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor -Motor: 3 kW 2860 rpm at 50 Hz -Motor: 4.4 kW 5800 rpm at 100 Hz -Shaft mount: Ø 40 mm -Shaft length: 150 mm -Dimensions: 600/240/H150mm -Weight: 40kg

CNC Boring and milling machine TIGER TFA 6 , 3200x1000x1580 mm, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 3700X1000 mm, Longitudinal travel x axis: 3200 mm, Cross travel y axis: 1000 mm, Vertical travel z axis: 1580 mm, Working feed x-y-z axes: 0 - 13.000 mm/1, Rapid feed x-y-z axes: 12.000 mm/1, Spindle taper: 50 DIN 69871, Spindle speed: 0 - 2500 giri/1, Cnc: SELCA 4045, Accessories: Automatic Head 2 postion, ATC 30 tool post

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 12000 rpm at 200 Hz -Indexable insert milling cutter -Motor: mounted on guides -Number: 3x motors available Price: per piece -Weight: 5 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Overall dimensions: 340/130/H220 mm -Weight: 18 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 4 kW 8760 rpm at 300 Hz -Shaft mounting: Ø 30mm -Dimensions: 390/160/H180 mm -Weight: 25 kg

A CNC 3-axis milling machine Hurco is available. Travel X/Y/Z: 760mm/510mm/610mm, table dimensions X/Y: 1020mm/510mm, max. table load: 1360kg, speed: 10000rpm, tool stations: 18, tool holder: SK40, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 2700mm/2200mm/2400mm, weight: approx. 4000kg, control: Hurco Ultimax, spindle hours: approx. 10500h. Documentation available. An on-site inspection is possible.

Travel X/Y/Z: 1300mm/900mm/1000mm, table dimensions X/Y: 2000mm/750mm, max. table load: 5000kg, rapid traverse: 6m/min. Machine dimensions X/Y/Z: approx. 3650mm/2700mm/2700mm, weight: approx. 9000kg, control: Heidenhain TNC 150. Documentation available. An on-site inspection is possible.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 3 kW 2880 rpm at 50 Hz -Motor: 4.4 kW 5820 rpm at 100 Hz -Shaft mounting: Ø 35 mm -Weight: 30 kg

Inv. Num. : 8552 Type: TMM-250 M1 Producer: Takisawa Created: 2005 Parameters: Control system: FANUC 180i Max. turning diameter: 350 mm Maximum spindle speed: 4000 1/min Bar diameter: 50.8/76.2 mm Length: 4745 mm Width: 2932 mm Height: 2250 mm Weight: 8500 kg Equipment: 2 spindles and 2 heads with driven tools

Manufacturer: Okuma Model: MA-500HA Year of Manufacture: 2004 Find more here - / Contact us at -

A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible.

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: Emerson Macchine Torino Type: Carrera 700 Year of Make: 2021 Specifications: Table size: 1,320 x 320 mm • X - Y stroke: 1,000 x 290 mm • Stroke of the Z-table: 400 mm • Distance from spindle table: 140 - 540 mm • Distance from spindle to column: 200 - 550 mm • Spindle stroke: 120 mm • Spindle taper: ISO 40 • Drilling capacity: 30 mm • Tapping capacity: M 16 • Vertical spindle speed: 90 - 2,000 rpm • Horizontal spindle speed: 40 - 1,350 rpm • Horizontal/vertical motor power: 2.2/1.5 kW • Dimensions: 1,920 x 1,850 x 2,200 mm • Weight: 1,900 kg Standard equipment: • Automatic tool screwdriver •Transmission • Horizontal spindle • Automatic feeds on the axles • Automatic spindle descent •Chiller � ...

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Dimensions: 340/130/H220 mm -Weight: 20 kg

Travel X/Y/Z: 495mm/205mm/355mm, table clamping surface: 1060mm, spindle bore: 46mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 4300mm/2100mm/1750mm, weight: approx. 1900kg. Only with counter bearing for arbor mandrels, key, and hobbing arbors. The machine shows bearing noise and play on the X-axis. Documentation available. An on-site inspection is possible.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.5 kW at 18000 rpm at 300 Hz -Shaft mounting: Ø 20 mm -Number: 1x motor available -Weight: 10 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -Power: 1.5 kW 12000 rpm at 200 Hz -Holding shaft: Ø 16 mm -Dimensions: 380/75/H160 mm -Weight: 8kg

GeneralVertical Machining centre; Control: CELOS X with HEIDENHAIN TNC7 CharacteristicsTable surface1400 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z1100/600/510 mmRapid feed X / Y / Z42/42/42 m/minMotor spindle speedMASTER® 20.000 rpmMotor spindle speedMASTER® 20.000 rpm AC main drive: 35/25 kW (40/100% ED) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Air Coolant Internal (through spindle centre) switchable via M-FunctionAir Coolant Internal (through spindle centre) switchable via M-Function

Key data: 8000 mm, 1300 mm, 2200 mm

1 new CNC travelling column milling machine Make: Soraluce Model: FL 8000 Year of manufacture: 2014/15 Spindle hours: 3242 Hours: 4261 Control: Siemens 840 D Solution Line Technical data: Travel distances X-Y-Z: 8000 x 1300 x 1800 mm Travel C-axis: 360 degrees Plate clamping area: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Speed range up to: 4000 rpm. Main drive: 43 kw. Rapid traverse: 35 m/min. CNC rotary table: 1600 mm 250 rpm Weight approx.; 40 to. Equipment / Accessories: Tool magazine: Controlled universal milling head Conveyor Full enclosure Complete cooling water system electronic handwheel IKZ. Fibro Reversible Clamp Fibr ...

Pear 1FC4 Tool Milling Machine Manufacturer: PEAR Model: 1FC4 X-axis (longitudinal): 200 mm Y-axis (transverse): 300 mm Z-axis (vertical): 155 mm Ratio: 1:1 Table dimensions (mm x mm): 600x400 Length x width x height: 1300 × 1300 × 2300 mm Collet bore mm: 4,6,8,10,12 Spindle speed: up to 12,000 rpm Distance between table and mandrel: 530 mm Engine HP: 0.75 RPM: 700-4400 Weight: approx. 1800 kg More items - new and used - can be found in our shop! International shipping costs on request!

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Hole: Ø 20 mm -Number: 2x motors available -Price: per piece -Weight: 3 kg/piece

WMW HECKERT FU450R-51 universal milling machine was built in 2009 in Belarus by Gomel Machine Tool Plant S.M. Kirov.. This extremely versatile, functional and reliable machine is designed for precision machining of workpieces with a maximum weight of 1500 kg. The machining process is performed by a powerful spindle on a large work table. T-slots in the table allow for quick installation of additional tooling such as a vice. The precision and repeatability of the manufactured parts, in turn, is maximised by the design made of the highest quality cast iron, which maintains excellent stability during even the most intensive challenges. All this makes the offered FU450R conventional milling machine an excellent choice for both unit and series production. The WMW HECKERT vertical milling machine weighs 4300 kg. Technical specifications of the WMW HECKERT FU450R-51 milling machine - number ...

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Indexable insert milling cutter -Hole diameter: 20 mm with keyway -Number: 3x motors available -Price: per piece -Weight: 4 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.3 kW 12000 rpm at 200 Hz -Hole: Ø 20 mm -Number: 3x motors available -Price: per piece -Weight: 3 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.7 kW 11400 rpm at 200 Hz -Voltage: 220 V -Hole: Ø 20 mm -Weight: 5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 16 mm -Number: 12 motors available Price: per piece -Weight: 3 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.40 kW 12000 rpm at 200 Hz -Motor: 0.55 kW 18000 rpm at 300 Hz -Receptacle: Collet -Weight: 4 kg

x-travel 500 mm y-travel 400 mm z-travel 400 mm Control TNC Heidenhain Speed range - main spindle 20 - 9,000 rpm/-1 Drive power - main spindle 9 / 13 kW Table diameter 700 x 500 mm swivel B: 105° (-10°/+95°) man. rotatable 360° man. max. table load 200 kg Number of T-slots 7 Centering bore 30H7 mm Number of tool locations 16 pos. Tool holder ISO 40 DIN 69871 max. tool length 290 mm max. tool weight 6.0 kg max. total weight 50 kg Feed speed max. 10,000 mm/min Total power requirement 17 kW Machine weight approx. 3.2 t Space requirements approx. 4.0 x 4.0 x 2.5 m

Travel X/Y/Z: 560mm/500mm/400mm, speed: 5000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29647h. The central lubrication system shows issues. Documentation available. An on-site inspection is possible.

Feed rate: 250mm/min, speed: 2800rpm, tool diameter: 200mm, weight: approx. 850kg. An on-site inspection is possible.