gear milling used for sale

A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.

Qty. 1 Second-hand CI Flexo Printing Machine Brand & Model: Carint Geared/gearless: Geared Built: 2000 No. of colours: 6 colours (6+0) Material to print: PE, PP, OPP, PET, Paper Printing width: 1250 mm Material width: 1280 mm Print repeat: 360 mm – 1040 mm Mechanical speed: Up to 300 m/min Un-winder and winder: Un-winder: Turret unwinder; non-stop Max roll dia.: 800 mm Expanding shafts: 3” Winder: Turret unwinder; non-stop Max roll dia.: 800 mm Expanding shafts: 3” Pumps: 6 x pcs, Pneumatic pumps Drying system: Electrical drying

Excellent Complete Myford Super 7 Metric Lathe Gearbox & Power Cross The lathe also comes with various extras which i will list out below. I may miss some but will do my best 5" 4 jaw self centering chuck (Pratt Burnerd) 3" 4 jaw self centering chuck (Pratt Burnerd) 6" 4 jaw independant chuck (Pratt Burnerd) 3" 3 jaw Self centering chuck (Pratt Burnerd) 4" 3 jaw self centering chuck (Pratt Burnerd) Many of the chucks got internal and external jaws 6 jaw swiss chuck with internal and external jaws Albrecht 0-3mm chuck with morse taper no1 Albrecht 0-6.5mm chuck with morse taper no1 Jacobs 0-3/8" chuck with morse taper no1 9" face plate 7" face plate x 2 6" face plate Jacobs 1/2" tailstock chuck Jacobs 3/8" tailstock chuck Jacobs 3/8" tailsock chuck Jacobs 1/4" tailstock chuck German 1/4" tailstock chuck Myford vertical slide swivel type with dials fitted Myford  ...

Little-used mixing, dosing and gluing system with gear pump in good condition: T-S-I MASTERMIX GEAR BASIC – Mixing and dosing system for 2K silicone adhesives – Two-component gear pump dosing system – Hose package 2.5 m, 2K gun – Control Siemens S7-200 – Overpressure/deficiency shutdown – Pot life monitoring with acoustic warning – 200-litre A follower plate – 20-litre B follower plate – Swivel arm extension 800 mm – Swivel arm elevation 300 mm – Extension of hose package 1000 mm – automatic hose down at parking position – Year of construction 2012, rebuilt by T-S-I in 2016/17 – Facility was little used – Sales from the Karlsruhe location / Southern Germany – Viewing possible by arrangement

Unused small gear wheel for a Westfalia MSB 130-01-076 skimming separator. Article number: 3170 3423 010. German name: Schnecke. For a 50 Hz driven machine., Type of Machine: Small Gear Wheel, Drive line: 50 Hz, Condition: Never used

This 7-axis Mazak 3D Fabri Gear 150 was manufactured in 2005. It features an impressive X-axis travel of 8750 mm, Y-axis travel of 1270 mm, and Z-axis travel of 375 mm. The machine is equipped with a powerful 2.5 kW resonator, providing efficient cutting capabilities. If you are looking to get high-quality tube cutting capabilities, consider the Mazak 3D Fabri Gear 150 machine we have for sale. Contact us for further details.

Bevel helical gearboxes Manufacturer : Bonfiglioli Model : A 504 UH50 P90 LOE engine: Euromotori 1,1kw MS9016Year of construction 2008 NEW, unused from old stock for more information see pictures.

RECON Part number: 1230 2144 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Unused gearboxes, angular gearboxes, partly without electric motors, partly with electric motors. Manufacturers e.g. PWH Plants + Systems GmbH These types and others pre-raetig: 1. PWH 90KW Type K2SZG250 n1=1500 rpm n2= 75 rpm i=20 P=90 KW Length over everything: 120cm Width over all approx. 55cm Height approx. 56cm Diameter of shaft rear (lies laengs) 45mm Transducer of the shaft front (lies transverse) outside 160mm Transducer of the shaft front (lies transversely) inside 140mm Weight-cooked 1,000kg 2. PWH 45KW Type KSZG200 n1=1470 rpm n2= 73.5 rpm i=20 P=45 KW All over: 94cm Pq7hwm Width over all approx. 45cm Height approx. 46cm Diameter of shaft rear (lies laengs) 50mm Transducer of the shaft front (lies transverse) outside 150mm Transducer of the shaft front (lies transverse) inside 120mm, passage 100mm Weight-cooked 600kg 3. PWH 37KW Type KSZG180 ...

gear motor, electric motor, servo gear motor -Manufacturer: SEW-Eurodrive, servo gear motor type RF27 CMP63M/KY/AKOH/SM1 -Gearbox:Type RF27 455 rpm i 6.59 -Motor: Type CMP63M/KY/AKOH/SM1 -Power: 3.30 Nm -Speed: 0 - 3000 rpm -Shaft: Ø 25 x 50 mm -Dimensions: 465/140/H170 mm -Weight: 10.5 kg

ZF Gearbox 6WG-190, HBM 230 Wheel Loader 4657026022, 4657-026-022, 4657.026.022, 55620613 6WG-190, Total Ratio 5.562-0.613 HBM-Nobas, HBM 230 Manufacturer: ZF Dismantled from running machine Incl. pallet dimensions 120x80x87 Stacker available Viewing desired Auction-ID: A1-49681-7

Liebherr ET No: 90201000, Forklifts available, Incl. pallet dimensions:120x80x62, 360Kg, Viewing desired. Auction-ID: A1-49681-5

BOBST FISCHER & KRECKE 10 c 1450/1500 mm gearless CI flexo print, Print materials: PE, OPP, CPP, PA, PET, paper, Print possibilityes: 10+0, Fast sleeve change, 4 motor per deck CNC position system, Computer supervision, Web width 1500 mm., Print width 1450 mm., Min/max print repeat 390/1.050 mm., Unwinder and rewinder type: Turret Automatic Shaftless with roll loading /unloading system, Max reel diameter unwinder and rewinder 1000 mm., Thermal oil drying system, Videocamera, Corona treatment AFS 6KW, Web guides, New Celio, 3 solvents vyscosity control, Automatic washing system, Closed chamber doctor blades, N.40 aniloxes, Print Sleeves: 535 sleeves, 60 pcs of adaptors, 6 different sizes, Min. - Max. thickness of materials- min: 12 micron max 200 micron, Max. Mechanical speed - 500m/min, Web slitting before rewinder to separate ups, Detection system for fire fighting system, working width ...

Bonfiglioli, Trasmission, 2T263908181, 713C3BS016A34C081H6 Incl. pallet dimensions 60x80x58, 280Kg, Forklifts available, Viewing desired. Auction-ID: A1-49681-15

Max diam 250 , max lenght 2000, 3 x heads , change gears

Gear Hobbing Machine Pfauter P 400 With interchangeable wheels 

Thread milling and hobbing machine Wanderer 31 NU Machining length 3000 mm With accessories

Gear hobbing machine horizontal Pfauter P160 With accessories

MAX DIAM 250 X 2000

Stock number: 3984 GEAR MILLING MACHINE Manufacturer: STAEHELY, Type: SHA 506 Machines NO.: 10442, Year of manufacture: 0 Specifications: Module 6 Table size 300 mm Ø Spindle speeds 100-500 rpm Accessories: Zuadds gear Operating instructions Length: 2200 mm, Height: 2000 mm, Width: 1300 mm, Weight: 4860 kg

SHIFT PULLEYS ,MAX DIAM 600 ,MAX MODUL 6

x-travel: 900 mm y-travel: 300 mm z-travel: 1000 mm control: Siemens Sinumerik 840D max. workpiece diameter: 1600 mm max. module: 20 mm tip circle diameter: 350 mm Milling arbour diameter: 375 mm Total closing value: 80 kVa weight of the machine ca.: 33,5 t dimensions of the machine ca.: 10,530 x 6,375 x 4,680 m Feed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8 Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter nominal: 2400 mm max. workpiece diameter: 2800 mm max. module: 30 mm control: Siemens Sinumerik 840 D dividing plate diameter: 2200 mm table diameter: 2500 mm Table hole Diameter / depth: 800 / 875 mm max. table load: 40000 kg Table rpm: 4,5 min-1 clamping length max.: 375 mm clamping diameter max.: 350 mm cutter diameter max.: 2800 mm Cutter arbor cone: HSK-B160 swivelling range milling head: + 30/-45° Distance Cutter - Workpiece: 615 / 1600 mm weight of the machine ca.: 57 t Slide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Equitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor - Oil mist extraction - technical Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, testing is possible by prior arrangement.

Auction-ID: A1-49365-28

PFAUTER PE 150 Hobbing machine GENERAL Project No.: 906008 Quantity: 1 pcs. Manufacturer: PFAUTER Type: PE 150 Control: Siemens 840 D powerline Year of manufacture: 1991/2009 Condition: Used machine Engine Approx (hrs): 33500 DESCRIPTION GEAR CUTTING Max. head circle diameter 150 mm Carriage stroke Z'-axis 200 mm Travel in X 150 mm Module 1-3 mm Bevel angle +30 to/to -45 degrees Max. tooth width 150 mm Max. diameter hob 130 mm Max. length of hob 220 mm Tailstock OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Electrostatic oil/emulsion mist extraction system Chip conveyor Engine is/was operated with oil Coolant Setup Circumferential Parts Storage Belt GENERAL TECHNICAL DATA Mains fuse 100 A Total power requirement 49 kVA Machine dimensions (LxWxH) approx. 5820x4047x2810 m ...

module: 10 diameter: 180 mm Bore diameter: 40 mm width: 75 mm : 2 weight: 14 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

module: 4 diameter: 180 mm Bore diameter: 40 mm width: 67 mm : 5 weight: 15 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece dia.: 40 mm max. module: 2 min. module: 0,1 workpiece length - max.: 665 mm weight: 4,5 t spindle bore diameter: 82,5 mm Control: Siemens total power requirement: 5,5 kW Technical data max. module 2 Pitch 0.5 - 25 mm Number of speeds multi-speed / multiple max. workpiece diameter40 mm max. workpiece length180 mm Milling cutter diameter max.80 mm max. milling cutter width12 mm Z-axis (milling length with counter point)90 mm Z-axis (milling length without counter point)113 mm Milling head swivelling angle30° / 30° Description Gear hobbing and thread cutting machine. LAMBERT - 124 CNC The machine is in a well-maintained condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Maximum workpiece outer diameter: 3420 mm Minimum workpiece inner diameter: 630 mm max. module: 30 mm control: Siemens Sinumerik 840 D Workpiece tooth width - max.: 600 mm tip circle diameter: 440 mm Milling arbour diameter: 80 mm x-travel: 1110 mm y-travel: 1300 mm spindle turning speed - stepless: 18 - 180 U/min rotary table speeds infinitely variable: 0 - 6 U/min Ring stength: 500 mm total connected load: 100 kVA weight of the machine ca.: 38 t dimensions of the machine ca.: 8,41 x 9,05 x 5,19 m Feed rate: - X-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in 1/min - Tool 18 to 180 - Workpiece table 0 to 6 Equipment/accessories: - IFK2 internal milling head - Milling arbor with spacer discs - Chip conveyor - Oil mist extraction - Dry machining only - Technical documentation The data for this ad was created with ModulMWS - the software sol ...

LOUIS PRÉTAT VZM 10 ist eine Zahnradfräsmaschine für Stirnverzahnungen, ausgelegt für präzise, hochgenaue und zuverlässige Bearbeitung. Arbeitsbereich: Durchmesser Ø1–Ø10 mm. Technische Daten: Anschluss 50 Hz 3×380 V, Leistung 1 kW, Maschinengewicht ca. 280 kg, Abmessungen L600×B600×H1250 mm. Ermöglicht enge Toleranzen und eignet sich für die Fertigung präziser Bauteile. Technische Daten ohne Gewähr

LOUIS PRÉTAT VZM 10 ist eine Zahnradfräsmaschine für Stirnverzahnungen, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsbereich: Durchmesser 1 mm bis 10 mm. Technische Daten: Anschluss 50 Hz, 3x 380 V; Leistung 1 kW; Maschinengewicht ca. 280 kg; Abmessungen L600 × B600 × H1250 mm. Erreicht enge Toleranzen; typische Einsatzbereiche: Uhrmacherei, Präzisionsinstrumente, Medizintechnik, Luft- und Raumfahrt, Automobilbau und Werkzeugmaschinenbau Technische Daten ohne Gewähr

max. diameter of machined gear: 320 mm, max. vertical feed: 250 mm, max. length of machined gears: at a 30-degree angle: 220 mm, at a 45-degree angle: 150 mm, at a 60-degree angle: 100 mm, max. module of machined gears: 6, bore diameter: 160 mm, taper: Morse 5 Auction-ID: A7-49398-43

Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken und Hubherdöfen Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen Herdwagenöfen Kammeröfe ...

max. wheel diameter: 180 mm gear width: ca. 220 mm max. module: 3 / 5 mm Control: Siemens 840D sl max. radial velocity: 5000 mm/min max. workpiece diameter: 180 mm table rotation speed: 800 U/min table diameter: 145 mm axial travel: 250 mm mm back rest:: axial travel: 300 mm clamping force max.: 13 kN milling head:: swivelable +/-: 45 ° drive capacity: 23 kW turning speeds: 6000 U/min diameter of tools max.: 90 mm tool clamping length max.: 211 mm module hobbing max.: 3 module profile milling max.: 5 tangential speed max.: 7500 mm/min weight of the machine ca.: 9,5 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

vertical and horizontal table feed: 150 mm, max. diameter of the machined gear: 125 mm, max. width of the machined gear rim: 140 mm, max. length of the machined gears: 300 mm, max. module of the machined gears: 2.5, max. helix angle of the machined gear teeth: 45 degrees Auction-ID: A7-49398-42

drilling capacity 32 mm, tapping capacity 12 mm, keyway milling cutters 16 mm, face milling 63 mm, spindle stroke 75 mm, projection 200 mm, spindle~table distance 55~405, 750W AC motor with inverter, gear drive, 3-axis SINO digital readout, spindle with fine adjustment, drilling milling head rotatable ± 90°, solid dovetail guide for the best stability and extreme precision, easy-to-read measuring ruler on the cross table, digital depth stop, ISO30 milling chuck including 6 collets in case, keyless drill chuck with pin DIN2080 / ISO30, expulsion pin, emergency stop button (CE), manual with parts list, coaster, delivered in original packaging Auction-ID: A1-48552-180

max. diameter of machined gear: 320 mm, max. table feed: 180 mm, max. module of machined gears: 6, distance from cutter axis to spindle nose: 120-300 mm, taper: Morse 5 Auction-ID: A7-49398-44

maximum diameter of the machined wheel: 320 mm, maximum module of the machined wheel: 6, maximum tooth length of the machined wheel: 220 mm, clamping spindle diameter: 250 mm, maximum diameter of the installed screws: 160 mm, maximum vertical travel of the chamfering clamp: 250 mm, CNC control: Siemens Simatic touch Auction-ID: A7-49398-41

Spur gear with drive motor 30 kW (e.g. suitable for a ball mill), shaft diameter 45 mm, N1 = 1,450 UPM, N2 = 14.5 UPM, drive shaft diameter 130 mm, with electric brake, coupling with counter window 600 mm diameter. Oil 190 CSX/50C - Wa-No. 369226. Complete on foundation frame.

Eria Pompe Pacco Type: One 80-2/AA.T34 No.: 5930 Transmission: Spaggiari Transmissioni Type: RM 100/1 No.: 101730/99 Macdonald: Ercole Marelli Power: 9.2 kW Condition very good Dimensions: LWH = 2200 x 400 x 570 mm

Gearmotor SEW R82DV132S-4 - used - MANUFACTURER´S DATA SEW R82DV132S-4 output: 5,5 kW motor speed: 1430/73U/min tension: 400/690Δ/Y shaft: 50mm CONDITION+HISTORY • operational standby-motor out of a company breakdown • shaft rotates, no further operation tests • condition see photos INSPECTION Motor can be inspected at any time. TERM´S OF DELIVERY Ex works DE - 83395 Freilassing, free on truck. COLLECTION By agreement Please feel free to contact us for any further questions! Project Organisation Alexander Torlach GmbH Breslauer Str. 41a 83395 Freilassing phone: +49(0)8654-77669-0 fax: +49(0)8654-77669-15 info@torlach.com

Gearmotor Bauer D1A41AHZ/253 - used - MANUFACTURER´S DATA Bauer D1A41AHZ/253 motor speed: 1420/114U/min tension: 380/Y protection class: IP54 shaft: 30mm CONDITION+HISTORY • operational standby-motor out of a company breakdown • shaft rotates, no further operation tests • condition see photos INSPECTION Motor can be inspected at any time. TERM´S OF DELIVERY Ex works DE - 83395 Freilassing, free on truck. COLLECTION By agreement Please feel free to contact us for any further questions! Project Organisation Alexander Torlach GmbH Breslauer Str. 41a 83395 Freilassing phone: +49(0)8654-77669-0 fax: +49(0)8654-77669-15 info@torlach.com

Gearmotor Bauer DK940 AH/241 - used - MANUFACTURER´S DATA Bauer DK940 AH/241 output: 2,0 PS Motor speed: 1400/121U/min tension: 380Δ/Y protection class: IP65 shaft: 25mm CONDITION+HISTORY • operational standby-motor out of a company breakdown • shaft rotates, no further operation tests • condition see photos INSPECTION Motor can be inspected at any time. TERM´S OF DELIVERY Ex works DE - 83395 Freilassing, free on truck. COLLECTION By agreement Please feel free to contact us for any further questions! Project Organisation Alexander Torlach GmbH Breslauer Str. 41a 83395 Freilassing phone: +49(0)8654-77669-0 fax: +49(0)8654-77669-15 info@torlach

Type: NUP 60 Machine number.: 218338 Com.: 205639 Year of construction: 1990 with screw feeder and paddle mixers Stöber gear Type R76-1027-750-4 No.: 874256 Rpm: 136-680 RPM Drive motor: DIETZ No.: 3807028 403195 B5/300 Power: 7,5 kW Paddle mixer power: 1,5 kW Mixing trough attachment approximately 150 l stainless steel Dimensions: LWH = 2400x630x1150mm with switchgear Weight: 600 kg

Mixing hopper with 2 paddle mixers Feed screw down Pump speed control Type: NM045SP02512B Com.: 35300131 MaschNr.: 289249 Year of construction: 1997 Condition very good Pump motor Flender in ex e II Performance: 3.6 kW, 1440 min-1 Transmission Lenze speed controlled 1 Paddle mixer: speed controlled N1-n2 = 28-143 min-1 Browse gear : KW 1.35 in Exx 2. Paddle mixer: 120 min-1, 1.35 kW in Exx Dimensions: LWH = 2800x500x700mm Weight: 600 kg Mixing and pumping of viscous products with solids

Manufacturer: Allweiler Type: SEBP 200.1 E11 P01 No.: 7610156/2 Year of construction: 1998 N1-n2 = 50-155 min-1 Q = 10-60 l / min, 600-3600 l / h Drive North, speed control Motor North Power: 2kW in EEx e II Stator with traces of use Dimensions: LWH = 1400 x 200 x 600 mm Per Dukein outlet: Flange DN 80 Weight: approx. 80 kg

Solid stainless steel case Transmission: Motovario speed controlled 190/1000 min-1 Type: TKR/100 Engine: Ercole Marelli Power: 7.5 kW, approx. 5 t / h 380 V good condition Dimensions: LWH = 2000 x 400 x 550 mm Weight: approx. 4100 kg

Make: Allweiler Type: SEBP 200.1 E11 P01 No.: 7610156/1 Year of construction: 1998 N1-n2 = 50-155 min-1 Q = 10-60 l / min, 600-3600 l / h Stöber gear, to regulate speed Type: R47-2092-200-4 Engine Siemens in EEx e II Power: 2 kW Damaged stator Dimensions: LWH = 1450 x 400 x 430 mm Weight: approx. 80 kg Productsas variable in-let Out: DN 80 flange