gear machine fo used for sale

Schwertfalzwerk / Mobile Knife Folding Unit GUK ZG 500 Year 1999 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 40m/min - max. 160m/min Produktivität / Productivity 20.000 cycles/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Ladegerät - Charger for forklift Jungheinrich E 220 G 24/65 B-ET-DA Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

3. Falzstation - Eigensteuerung - 3. Folding unit - SelfControl MBO T92/444 - 56/4 Year 1986 - Serial-No. 20860601 Infeed width max. 560mm 4 buckles SELFControl Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Gabelstaplergabeln - Forklift Forks Cascade 100mm Year 1996 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Folding element, roller conveyor, driven, Mosa - used - : Price from location: 500.-€ (net), dismantled, packed and loaded! Manufacturer: Moca Type: RF Year of Make: 2001 driven Element length: approx. 1m Element width: approx. 72cm Roll length approx. 65cm Roll diameter approx. 4.5cm 400V, 1.1kW, 50Hz, 2A, Condition: good Available: immediately Location: CZ, Bor, later camp Frankenberg / Saxony

6500ton Open Die Forging Press HJ / Seonam (Korea) Design: Eastern European Corporation Installation: 2006/2008 Press Type: Four column push down Oil hydraulic system Nominal force (static working pressure of 320 bar): 5,000 Tons Up-setting force (static working pressure of 420 bar): 6500 Tons Daylight: 5,200 mm Stroke of Movable cross head: 2,700 mm Main Ram dia. (Center cylinder): 1 set - ￠950 mm Side Ram dia. (Side cylinder): 2 sets - ￠750 mm Return cylinder Ram dia: 2 sets - ￠300 mm Moving Table Width: 2,600×Length 6,600 mm Moving Table stroke (center to both side 2,750mm): 5,500 mm Approaching speed: 300 mm/sec Main cylinder Forging speed (2,200 tons/ 320 bar): 163 mm/sec All cylinder Forging speed (5,000 tons/ 320 bar): 73 mm/sec Up-setting Forging speed (6,500 tons/ 420 bar): 10 mm/sec Return speed: 270 mm/sec Hydraulic Main pump: 12 sets  ...

buckles: 4 pcs max. paper size: 52 x 85 cm serial no.: 984580044 speed: 200 m/min fold depth max. 46,5 cm paper grammage 40-250 g/m² full size 10 x 12 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used pet food production and packaging line made by Waldner. New 1995.

Qty. 1 Second-hand 160 MN Horizontal Direct Single Action Extrusion Press Mfc.: SMS Force: 16 000 MT Built: 2015/2016 Billet dim.: Dia. 610/720 x 750 – 2500 mm Scope of supply: Induction Billet Furnace Extrusion Press Quenching System Puller Run-Out Table Stretcher Finishing Saw Profile Stacker Die Oven Billet Peeling Machine

Maximum plate format 1422 x 1804 mm, incl. Automatic Pallet Loader APL 1 segment, inline punch, online processor Glunz & Jensen 165 HDX Immediately available, price ex location on request, delivery worldwide

Max. sheet thickness: 1.5 mm steel 2 transit stations Weight: approx. 500 kg

Nominal force 1250 ton - first stage : 260 tons, - second stage : 800 tons, - third stage : 1250 tons, Slide stroke 1250 mm Distance between table and slide 2650 mm Main cylinder dia Ø 500mm Return cylinder dia. ( two) 2xØ400mm Distance between column 1800mm Table size width / length 1250 / 3150 mm Main motor power 150 kW Machine dimensions L x W x H 16950 x 12100 x 11410 mm Weight 265000 kg Forging manipulator FS2ЕТС -2T also available 1T and 700t

for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available

sheet width: 480 mm plate thickness: 3 mm stations: 13 total power requirement: kW weight of the machine ca.: 11 t dimensions of the machine ca.: 15,x2 m Number of stations 13 Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile The techn. Data is manufacturer or operator information and therefore for us not binding. We reserve the right to make an interim sale, it applies exclusively our business and conditions of sale. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1645 t stroke: 1000 mm dayligth: 3000 mm Control: down speed: 280 mm/sec return speed: 275/346 mm/sec distance between columns: 2520 mm total power requirement: kW weight of the machine ca.: t the machine is in very good condition optional you can buy a shifting table as well The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 4000 kg stroke: 3200 mm fork length: . mm power fuel: Diesel weight of the machine ca.: 6,43 t dimensions of the machine ca.: 4,8x1,5x2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t passage width: 810 mm stroke: 400 mm table surface area: 1140x740 mm ram surface: 1140x740 mm dayligth: 670 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1800x1800x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

mechanical force transducer, force measuring bracket FORCE GAUGES HALLE 0 - 10 kN 1 t in wooden box Dimensions: 250 x 150 x 85 mm

mechanical force transducer, force measuring bracket FORCE MEASURING INSTRUMENTS HALLE 0 - 2000 N 200 kg in wooden box Dimensions: 250 x 150 x 85 mm

Shaft forks 1 pair PAGUS 1300 x 800 x 100 mm Fork width: 120 mm Fork height: 40 mm Shafts Ø: 50 mm used,, tested ! Dimensions: 1300 x 800 x 300 mm

Foil wrapping line for mailings with - shrink tunnel Make Dekapacker Model SPK 4-35 Year 1999 basic description this line exists of 4 feeders, a bundle packer with side seal, a shrink tunnel, a U-turn belt and a delivery belt Dekapacker feeders Station 1 non/stop push feeder for i.a. books or other rigid materials Station 2+3+4 non stop rotary vacuum feeders for booklets, signatures, sheets, labels Dekapacker wrapper Model SPK 4-35 Width 90 - 350 mm Height up 120 mm Speed up to 40 cycles per minutes Sealing on 2 or 4 sides Dekapacker shrinking tunnel Width 500 mm Heigth 300 mm Belts Belt 1 U-turn belt Belt 2 Straight belt General information Foil details For PE and shrink foils, 20-60 micron. up to 600 mm Details waste material is winded up Video Click here Available direct

Centrifugal fan, centrifugal fan, centrifugal fan Heavy duty ABB FOU HD 87L 4 2P ADXR0 9 Inlet: Ø approx. 360 mm < br /> Outlet: 270 x 450 mm Motor : 75 kW 2965 rpm 380 / 660 V used, ! weight approx. 950 KG Dimensions: 1200 x 1400 x 1650 mm

Punching PAGUS punching punching force approx. 4000 kg installation height approx. 200 mm projection: approx. 380 mm table 300 x 300 mm 380 V used, tested ! Dimensions: 1000 x 920 x 1550 mm

Standing stainless steel tanks, V4A Volume: 12,500 L Dimensions: Ø 2.35 × 3.10 high incl. feet Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Complete Mechanical Upgrade by GFM, with increase of Power to 900 Ton/hammer and new CNC in 1991 Numbers ̈of Hammers: 4 Forging force: 3.600 Ton (900t per hammer) Strokes per minute: 270 Maximum diameter of forging: - circular cross section: Ø 400 mm - square cross section: 320 mm Minimum output diameter: - circular: 60 mm - square: approx 50 mm Maximum length of forging with/without lateral reception: 8.000 mm / 9.700 mm Feed of manipulator A: 7.140 mm Feed of manipulator B: 9.940 mm Workpìece weight: 2500 kg Total power supply (nominal power): ca 1.600 kW Machine weight: 493.000 kg

Screen deck 2-fold, 60x100cm Coarse/Fine: 3mm/5mm Coarse/Fine 2mm/6mm 4 pieces in stock

Pretzel mixer for brezel eye Hydrometer included including drip tray and dosing cap Stainless steel trolley with locking castors Greatest possible safety for the desired caustic concentration. Optimally mixed, quantities filled exactly as needed. Dimensions (WxDxH) in mm: 620 x 450 x 1030 NEW Device Come to our large bakery equipment warehouse!

Roller width: 350 mm roll diameter: 110 mm Roller covering - soft rubber: 70 Grad shore rubber: NBR - Qualität Pressure line: 28 N / mm air pressure: max. 4 bar Capacity of dye tub: Becken - 1,3 Liter Capacity of dye tub: Zwickel - 0,3 Liter Speed driven roll: 0-25 U/min speed: 1 - 10 m/min voltage: 230 V / 50 Hz drive motor: 0,4 kW weight: 130 kg dimensions: 1050 x 800 x 810 mm • 2-Roll-laboratory padder for horizontal and vertical roller-arrangement. • The changing from horizontal to vertical roller arrangement can be effected by easy re-allocation of the upper squeezing roll with the pressure cylinders, • small trough for vertical roller-arrangement, content: 1.3 litres, • with controllable motor drive, direct drive effected of the fixed roll, by means of wheels the pressure roll is driven when the nip is open. The data for this ad was created with ModulMWS - the softwar ...

Format range: max. 680 mm min. 126 mm Equipment: Longitudinal seam, disc underglue unit left, Vibrator & dental gauge on the feeder, Bobst CUBE control, primary crusher right and left, kicker, counter, fully automatic format setting with program memory, pneumatic, intermittent press belt. Overhauled 2022: cleaned, checked, painted, new jetty and Transport belts.

We offer Peri Trio Elements 270 x 240 with 50% discount newly covered with original Peri Finply formlining 32 x Peri Trio Element TR 270 x 240 á 3409,00€ - 55% Discount = 1704,50€ / Piece Net price You bid on 1 element Peri Trio 270 x 240 sold separately. Subject to sale Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

Thermal Oil Boiler Heuft TH 1/Z A used thermal oil boiler Heuft TH1/Z with 116 kW power is currently available for sale in our warehouse. Thermal Oil Boiler Heuft - with gas burner - Heating capacity 116 kW -Ab. Operating overpressure 10 bar -Ab. Operating temperature 300 C - Minimum volume flow 6 - Operating voltage 400 V 50 Hz - Control voltage 230 V 24V - Connected load 4.6 kW - Rated current 8.5 A