132,187 used machines on RESALE, but how to find them? Machine Search
Continuously motion folding box cartoner with automatic blister infeed. Mechanical output up to max. 300 cycles/min. TThe unit is fitted with: blister infeed, GUK Leaflet folder, coding device, Reject station, vacuum pump. PLC: SIEMENS Type: Simatic S7-300
Injection moulding machine for food and beverages caps
Key data: 6000 mm
Hydr. Long bending machine with roller shears
- Feeder - Digital control - 4 pockets - Perforating modul - Mobile delivery
Uhlmann C 100 horizontal cartoning machine Modified 2025 - Fully automatic blister strip packaging and simultaneous feeding of package inserts - Max. output 120 FS/min / depending on product Format: L= 70 x 150mm W= 30 x 100mm H= 15 x 85mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel mechanically overhauled Accessories optional: - GUK brochure folder 4-fold folding - Cognex 1D barcode and 2D matrix code reading system for leaflet and folding carton code - Luminizens control, presence control for package inserts in folding cartons - Embossing station - Brochure insertion - Vacuum pump or Venturi nozzle
Key data: 4
Technical data/equipment: 4 planing shafts Voltage 380 V/ 50 Hz Power consumption 20 kW Weight approx. 1500 kg More dates to follow The sale is carried out on behalf of the owner, in the condition as it is, excl. Warranty.
Key data: 1000 mm, 18 kN
TC120Bj. 1992 against highest bid Partially overhauled with tools Working area y1000 x2000 with resetting Bosch control with graphics programming Tool Changer 9Stations /2Paws Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service
Key data: 1300 mm, 22 kN
TC500Bj. 1995 against highest bid Partially overhauled with tools Working area y1300 x2500 with resetting Bosch control with graphics programming Tool Changer 20Stations /3Paws Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service
Large working width: 3060 mm for sheet metal (at 40 kg strength) up to: 4 mm Kl. Bending radius: sheet thickness x 1.25 Kl. Inboard height: sheet thickness x 6 Opening width of the upper beam: 220 mm Adjustability of the lower/bending beam: 90 mm Max. bending angle: 180° Lifting speed down/up: 40/60 mm/s Hydraulic drive: 380 V, 7.5 kW Weight: 4.3 t Space requirement: 4150 x 1800 x 2500 mm
Key data: 1500 mm, 22 kN
TC500 Bj.1999 Partially overhauled with tools Working area y1600 x3000 Bosch control with graphics programming Tool changer 21 stations (with multi-tool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service
Key data: 1500 mm, 22 kN
TC500 Bj.1998 Partially overhauled with tools Working area y1600 x3000 Bosch control with graphics programming Tool changer 21 stations (with multi-tool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service
Folding nut for die casting machine, TR330x10, 931375, Frech/Müller Weingarten, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Folding nut, Tr330x10, 2 pieces 550x220x220mm high. Approx. 270kg, 931375, The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Product Features: The KaFe manual Penal Bender(Bending center) is a next-generation, fully automatic multilateral bending center, offering high precision and efficiency. It represents a benchmark for automated production in the sheet metal manufacturing industry. It significantly reduces labor costs and boasts a bending speed three times that of CNC press brakes, reaching 0.5 seconds per turn. Full servo control ensures product accuracy within 3 seconds. Product Function: The kaFe Manual Penal Bender (Bending center) can bend sheet metal into various complex shapes without the need for molds. Equipped with a pure electric servo system, it replaces hydraulic drive and offers environmentally friendly, high-speed, high-precision, and maintenance-free features. This high-tech product was developed and manufactured to improve production efficiency, reduce labor intensity, and enhance cor ...
Key data: 6020 mm, 1 mm
With hydr. Roller shears SM 1.5 and depth stop (4 stop fingers). with emergency stop rail, slide-back sheet metal supports and control on the swivel arm, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 6020 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.80 mm Back gauge: 1000 mm Colour: blue Total power requirement: 16 A Dimensions: 6810 x 1580 x 1870 mm Insertion depth: 1000 mm Machine weight: 3000 kg Upper beam stroke: 200 mm Roller shears motorized Number of stands: 5 pieces Opening width: 200 mm Bending angle: 140 degrees Back gauge: 25 mm Machine number: 9888-10
Heidelberg Stahlfolder Ti 52 4/4-f152.1 Folding Machine This folding machine is in excellent technical and visual condition and is fully operational. Technical Details: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High-capacity stack feeding Four cassettes on the first module (Ti-52) Four cassettes on the second module (Ti-52) Inverter-controlled, precise folding adjustments Noise reduction Double sheet detection sensor Electronic batching counter Electric-powered delivery with adjustable speed settings Comes with spare parts and tools for maintenance This machine is ready for immediate use form our warehouse in 67269 Gruenstadt, Germany
Folding Machine Steel T 36 Year of manufacture: 1985 Flat Pile Feeder Folding Type: 4 buckles - 4 buckles Size: min. 80 x 100 mm - max. 360 x 650 mm Paper weight: 40 - 250 g/m² Pile height: max. 580 mm Speed: min. 10 m/min. - max. 160 m/min. Diameter of folding rollers: 32 mm Delivery: Stream delivery Compressor included immediately available from our warehouse in Germany
Pastry machine Kalmeijer KGM with heating system, Sheet metal transport with "stop and go" & 1 figure roller "Speculoos" Machine mobile Connection 400V,16A-CEE plug Dimensions: 560 x 570 x 1230 mm, WxDxH Used machine cleaned Quality from a specialist company! Benefit from over 35 years of experience! Other Figure Rollers Baking tins Maintenance contract Delivery E-Box for more safety Instruction & Commissioning
Weinig Hydromat 23C four-sided planer Working width 230mm Working height 160mm Number of spindles 7 Spindle layout: 1.Down 15kw 2.7.5kw rights 3.Left 7.5kw 4.Top 15kw 5.Lower 30kw (multi-saw) 6.Lower 7.5kw (hydro support) 7.Upper 7.5kw (hydro support) Spindle speed 6000r.p.m Spindle Diameter 50mm 4 pulling rollers in the working table Inverter-adjustable feed speed up to 36m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation
Weinig Profimat 22N four-sided planer Working width 220mm Working height 120mm Number of spindles 6 Spindle layout: Lower 4kw Rights Left 5.5kw Upper 5.5kw Lower 4kw Universal 4 Feed speed adjustable by variator 6-22m/min 3kw feed motor power Adjustable spindles
Key data: 1250 mm, 1 mm
with the following equipment: segmented with quick-clamping system Segment height: 100 mm Division of the segments: 8 x 100 mm 1 x 30/40/50/60/70 mm 1 x right corner 100 mm 1 x corner left 100 mm with engraved measurement numbers in upper and bending beam segments incl. wheels Extras: with window sill insert for the production of head edges, segment height 100mm with depth stop with T-slot rail Working length: 1250 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.80 mm Colour: blue Dimensions: 1730 x 740 x 1180 mm Machine weight: 290 kg without roller scissors Opening width: 90 mm Bending angle (max.: 150 mm Machine number: UK 20361
Max. bending length: 2040 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Manual backgauge with spring fingers Weight: approx. 2300 kg
PAPER CUP FORMING MACHINE SINGLE WALL 12 oz (90mm TOP DIAMETER) IN AN EXCELLENT AND WORKING CONDITION VERY LITTLE HOURS OF OPERATION .
A foam bag system for packaging smaller and individually manufactured parts is available. Packaging capacity: 16 bags/min, film type: perforated, bag dimensions 1 X/Y: 470mm/400mm, bag dimensions 2 X/Y: 470mm/600mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/700mm, weight: approx. 30kg, control: Instapak 901. Includes two component filler, spare parts, and foil bags. Documentation vorhanden. An on-site inspection is possible.
Key data: 6400 mm, 1 mm
used Jorns double bending machine, with the following equipment: - 4 pneum. Clamping finger with short-part clamping finger - Attachment rail - Foot control - Sheet metal cassettes - Upper beam with rebate groove - Hydr. Material thickness adjustment - Clamp and angle stop (Matic) Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6400 mm Sheet thickness max. steel 1.5 mm Sheet thickness max. aluminium 2.0 mm Sheet thickness max. VA 1.0 mm Back gauge (min.) 15 mm Back gauge (max.) 1125 mm Colour anthracite/light grey Total power requirement 20 A Dimensions 7332 x 3721 x 2040 mm Weight 9250 kg Upper beam stroke (opening width) 200 mm Bending angle (max.) 145 degrees Crowning manual without roller scissors Number of stands 5 pieces Insertion depth 1150 mm Machine number K13036
A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.
- flat pile feeder - 1. Station 4 buckles - 2. Station 4 buckles - standard delivery
Max. bending length: 2040 mm Max. sheet thickness: 4 mm steel Max. upper bolster stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via toggle switch Bending rail in top condition Manual backgauge with spring fingers 4000 kg
sheet width: 2040 mm plate thickness: 4,00 mm distance between columns: mm upper beam stroke: 350 mm total power requirement: kW weight of the machine ca.: ca.4,00 t dimensions of the machine ca.: m Manual and automatic bending sequence possible Bending angle adjustable via potentiometer Upper jaw stroke height and material thickness selectable via DIP switches Bending rail in excellent condition Manual backgauge with spring fingers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mould grinding machine OTT - KG Up to 150 mm wide with Stepless Transport Carpet Profile strip and semi-round mouldings
Weinig Hydromat 23 four-sided planer 60m/min Working width 230mm Working height 160mm Number of spindles 5 Spindle layout: 1.Lower 15kw 2.11kw rights 3.Left 11kw 4.Upper 15kw 5.Lower 7.5kw Spindle speed 6000r.p.m Spindle Diameter 50mm 3 pulling rollers in the working table Inverter-adjustable feed speed up to 60m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation Machine dimensions 300x180x170cmH Weight 3500kg Net price 130.000PLN
Size: 520 mm Equipments: 4 bags, 1st work 4 pockets 2nd work X Kreuzbruch Unit Flat stack investors
Width 72 cm Year of construction 2014 Pallet feeder FP 120 Pallet feeder with Vaculift and Vacubelt MC Control 1st station: 8 fold pockets 72 cm Downstream knife shaft 2nd station: 4 fold pockets 52 cm Downstream knife shaft Shed display partially overhauled - workshop tested - new folding rollers station 1 Machine condition: cleaned and checked Delivery date: immediately from stock
Uhlmann C 130 horizontal cartoning machine ampoules / blister machine - Fully automatic blister strip packaging and simultaneous feeding of package inserts - Max. output 120 FS/min / depending on product Format: L= 70 x 150mm W= 30 x 100mm H= 15 x 85mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel 10-year spare parts procurement guarantee mechanically overhauled Accessories optional: - GUK brochure folder 4-fold folding - Barcode reading of the folding box / package insert - Luminizens control, presence control for package inserts in folding cartons - Embossing station - Brochure insertion - Vacuum pump / Venturi
Key data: 5 , 450 mm, 120 mm
TECHNICAL DATA: Working width: 450 mm Working height: 120 mm Milling spindle: Ø 40 mm Planing spindle: Ø 50 mm Lower planing spindle with counter bearing Number of spindles: 5 Installed capacity: 56 kW SPINDLE CONFIGURATION: 1: bottom (11 kW) 2-3: right-left (11 kW) 4: upper (11 kW) 5: bottom (11 kW)
Key data: 4 , 180 mm, 120 mm
Used machine Workpiece width 180mm Workpiece height 120mm 4 spindles: 1) Horizontal bottom 180mm 3.7kW 2) Vertical right 120mm 4kW 3) Vertical left 120mm 4kW 4) Horizontal top 180mm 5.5kW Diameter of spindles 30mm
Biscuit forming machine Janssen FM128 K580S used Janssen FM 128K580S pastry forming machine with 600mm working width including 2 forming rollers. The machine is mobile on rollers, completely covered with stainless steel sheets. The machine is in good visual and technical condition and can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - 60cm sheet size - With 2 forming rollers (optionally extra forming rollers) - With additional heating - Stainless steel cladding - Automatic sheet metal feeding - For trays: 60x40cm, 60x80cm or 60x100cm - Heating: 2 x 2000W - Connected load: 380 volts
Upright delivery with pressing rollers Make OMG Model Economic P/700 Year 2006 Speed up to 30.000 Minimum size 100 x 110 mm Maximum size 330 x 700 mm
Folding machine Horizon MT/PF-40L, machine number 008002, two pockets, pre-stored programs, electrically controlled pockets, in good condition, immediately available, Technical data: Maximum format: 320x630 mm Dsbrex S Etaj Sb Shuokg Minimum format: 125x128 mm Weight: 40–160 g/m² Speed: 23,000 cycles/h 2 parallel cassettes 230V power supply Electrically controlled boom Counter with collection function Stepless speed and feed adjustment Stack Feeder Soundproofing cladding on all units and cassettes Documentation
Key data: 8020 mm, 3 mm
with hydraulic scissors, emergency stop rail, attachment rail, control on the swivel bracket, radius adjustment. The connection Hydraulic power unit is behind the machine. Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 8020 mm Sheet thickness steel: 3.0 mm Sheet thickness aluminum: 4.0 mm Sheet thickness front: 1.5 mm Back gauge (max.): 1000 Radius: 1020 Colour: grey/blue Total power requirement: 46 A Space requirement: 10,000 x 2,300 mm Insertion depth: 1000 Machine weight: 8000 kg Oberwangenhub: 200 Roller shears: 3.0mm Number of stands: 10 with cutting device for cutting to length/ Öffnungsweite_ h 200 Max. bending angle: 143 crowning without underbeam adjustment Back gauge (min,) 15 Machine number: 09488-01/K19149
Key data: 3020 mm, 1 mm
in good condition, POS 400 control with digital display, without stop system, with standard rail Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 3020 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Blechdicke VA/sheet thickness Stainless 1.0 mm Colour: white/blue Dimensions: 3930 x 700 x 1175 mm Machine weight: 2120 kg Motor power: 0.55 kW Upper bolster stroke: 120 mm without cutting device for cutting to length Bending angle (max.: 145 degrees Machine number: 180928
Folding machine Eurofold 235 ST Art.Nr. L1130 The folding machine has been serviced and is located in a excellent technical condition. A 3-month warranty applies to mechanical assemblies and parts.
Flatpile With Tremathead, 1st Station: 4 Pockets, 2nd Station: 4 Pockets, 3rd Stations: 2 Pockets, Delivery
Pallet Feeder with Tremat Head, 1st Sation: 4 Pockets, 2nd Station: 4 Pockets, Mobile Knife, Delivery
Serial No. FH. FANB-000076, Flatpile Feeder With Tremathead And DCT Control, 4 Pockets, Delivery, Equipped With Heidelberg Gluing Unit, Format: Max. 40x84cm, Min. 10x15cm
Serial No. FH. FAPF-001439, Flatpile Feeder, 4 Pockets, Delivery
Speed: 230 m/min, Full Automatic Adjustment Control, Touch & Work Technology, Memory Storage for Folding Programs, Flate Pile Feeder, 4 Pockets, 1 Knife, Anti Noise Hood, Delivery Conveyor, Standard Accessories
maximum number of results exceeded
please refine your search
