gear machine fo used for sale

Specifications: Working length: 4060 mm Bending capacity: 3.0 mm Control with bending simulation: MULTIBEND 901 grafik 2D Automatic adjustment of the bending angle depending on material thickness Bending angle adjustment: 0 – 180° Backgauge motorized adjustable: 10 -1500 mm Max. opening bending beam: 300 mm Bending and lower beam adjustment range : 80 mm Motor power: 7.5 kW Dimensions (length x width x height): approx. 5500 x 4050 x 2600 mm Weight: approx. 6.8 tons

Manufacturer: Econo-Pak Type: FA-KT Year of Make: 2003 Condition: good Inclusive: - 1-head folding carton display WVE-DR-R Hotmelt (2 adhesive spots) - Angle capper - SIMATIC OP7 HMI - Nordson Hotmelt 3400V-2GAV4D/R Hot Melt Machine incl. Hand Glue Gun - Handheld control unit - Videojet 2-line for coding - 3 stamp formats / sets available: 188 x 150 x 50 mm // 188 x 140 x 90 mm // 189 x 150 x 140 mm WITHOUT checkweigher Folding carton conveyors

Key data: 7 , 230 mm, 160 mm

SPECIFICATIONS: Maximum processing height: 160 mm Maximum machining width: 230 mm Length of inlet planer: 2100 mm Spindle diameter: 40 mm Number of Spindles: 7 (6 + 1 Universal) Grid table Shaft drive (3.7 kW) Self-braking motors Voltage: 380 V Spindle configuration: 1ST: BOTTOM (5.5 kW) 2ND: RIGHT (5.5 kW) 3.: LEFT movable (5.5 kW) 4TH: RIGHT (5.5 kW) 5TH: TOP (7.5 kW) 6TH: BOTTOM (7.5 kW) 7TH: UNIVERSAL SPINDLE 360° (7.5 kW)

Folding machine steel TD 52/4/4/2 Year of manufacture 2001 Art.Nr. PS6422 Rollers in the TD 52-2 plant would have to be replaced

MBO foldering machine T 800, config.: 6-4, built 2004, format: max: 78 x 120; min: 15 x 25 cm with Piab air system , serial equipment, slitting shafts in all units and manuals. In very good condition technically as well as folding rollers. More photos on request. Navigator control unit MBO T 800.1-1-78/6- first folding unit 6 pockets auto adjustable MBO T 800.1-2-78/4- second unit 4 pockets manual adjustable Can ship worldwide.

MBO folder type T 800 6-4, built 2005. With PIAB air system, Navigator control, steel plate in feeder, serial equipment-slitting shafts and manuals. Configuration: 1. MBO T 800 1-1-78/6: folding unit 1 have 6 pockets that can be automatically adjusted 2. MBO T800 1-2-78/4: folding unit 2 have 4 pockets that are manually adjusted 3 MBO Stream delivery. TESTED. All rollers in very good condition. One auto pocket needs new servo motor. Available immediately. Can ship worldwide.

MBO T530 folding machine with stand up feeding with the following units: 1. MBO T 530 -1 53/4-R 2. MBO T530 -2- 53/4 3. MBO stream delivery table The machine is in production ready condition, with a huge amount of serial equipment such as guides, perforation wheels, etc. Available immediately, can ship worldwide.

Folding machine Make MBO Model T400X Year 1998 Maximum size 420 x 630 mm Configuration Feeder Flatpile feeder 1st station 4 plate buckles 420 mm 2nd station knife fold Delivery belt delivery Details with batch counter, noise hoods, vacuum pump, HSS glue computer only Available direct

- max. open blacnk width 800 mm - straigh line - automatic crash lock bottom - gluing system with discs - machine in production

FOLDING MACHINE MBO T 500 4-F -Max paper size 52 x72 cms. -Year 2003, only one onwer -Rollers in excellent conditions -Flat pile feeder -Four combi folding pockets -MC Control FW1 -Anti noise hoods protections -Sheet delivery MBO SA 52 -All manuals, tools and accessories -Available in March

PART NUMBER: 7503 SPECIFICATIONS: - max planing width 610mm - max planing height on both sides 200mm - max planing height on four sides 100mm in advance: - 2 rubber pull rollers - 2 toothed pulling rollers - metal pulling roller - Pulling insertion shaft, toothed -Triggers -Pressure - pulling shaft, toothed 2 pcs -Pressure - planer shaft 610mm, 4-knife 7.5kW -Pressure - Pulling roller, smooth, metal -Pressure - profiling roller 7.5kW -Pressure - rubber pulling roller From below: - scoring unit, axle 35mm, axle length 130mm 2.2kW - guide strip 2 pcs - Introductory table top - Pulling shaft, smooth - planer shaft 610mm, 4-knife (2 knives installed) 7.5kW - 2 pulling shafts, smooth - Split metal skid roller - side pressure behind: - Side spindles + clamps 2 - 1) vertical right 95mm 4kW - 2) vertical left 95mm 4kW - spindle diameter 35mm - spindles adjust ...

PART NUMBER 7474 Specifications: - max width of the workpiece 230mm - max height of the workpiece 160mm - number of spindles 5 1) Horizontal bottom 230mm 7.5kW 2) vertical right 160mm 5.5kW 3) Vertical left 160mm 5.5kw 4) horizontal top 230mm, electrically adjustable up/down 7.5kW 5) Horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 6 pulling, toothed insertion shafts, including 2 double shafts - 2 pulling lead shafts, rubber, single from below: - Pulling, metal, torsion toothed insertion shaft - Metal, smooth metal pulling outfeed shaft - pressure plate on the side - pneumatically adjustable rollers - length of the introductory table top 2020mm - central lubrication - Electric planing thickness adjustment from the control panel - smooth feed speed control 6-30m/ ...

Hydraulic folding machine - ordering machine (delivery time approx. 10-14 weeks), incl. hydraulic dynamic crowning, touch screen, Pressure regulation of the upper beam, back gauge (1000mm), goat's feet with automatic tool clamping, electr./hydr. Adjustment of the bending beam -Similar to illustrations- hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touch screen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar-

max. format 49 x 65 cm Year of construction 2000 Flat pile feeder with suction head 4 fold pockets in the parallel fold section 1 folding blade in the cross-fold section 1 more fold pocket after the 1st cross break Shed display Price on request. We supply and install worldwide.

6 pockets 2 knives upright sheet delivery SBPD mobile knife

flat pile feeder 2 folding units - 4 buckle plates: T500-2-500/4 Mobile knife: T500-3-X Also with easy delivery Noise absorbing hoods Stream delivery A 56

- Maximum paper size: 674 mm x 365 mm - Minimum paper size: 140 mm x 148 mm - Maximum paper weight: 240 g/m² (depending on material) - Minimum paper weight: 60 g/m² - Speed: Up to 27,000 A4 sheets per hour (depending on material and fold type) - Load capacity: Up to 500 sheets - Electrical requirements: 240V, 50/60 Hz - Dimensions: 1240 mm x 555 mm x 1360 mm - Weight: 118 kg

- Max. paper size: 470 x 650 mm - Min. paper size: 120 x 135 mm - Max. paper weight: 250 g/m² - Min. paper weight: 40 g/m² - Working width: Up to 50 cm - Vacuum suction feed - Flat pile feeder - Noise protection cover - Digital control panel with programs - Two folding pockets - Sheet counter - Optional additional equipment: Creasing and perforation wheels - Speed: Up to 40,000 sheets per hour - Power supply: 380 V, 50/60 Hz

- Flat pile feeder - Tremat - Digital control - 1. Station with 4 buckles - Cross fold station with 2 knifes + buckle - SAK 56 mobile delivery

Gr. working width: 1250 mm for sheet metal up to: 1.75 mm Opening width upper beam: 70 mm Adjustability bending brace: 50 mm Space requirement: 1880 x 740 x 1140 mm

Heavy Duty Four-Sided Combined Calibration Milling Planer with Additional Scoring Saw for Relief Grooves Detailed technical description in the PDF document (as an attachment in the photo gallery).

WITH SHRINK TUNNEL & VIDEOJET Speed: max. up to 10,000 cycles/hour Formats (mm): min. 105 x 148 // max. 250 x 340 Thickness: min. 2 mm, max. 25 mm Counter: 26 million Equipment / Additional information: Processing with film -PE-, PP-, OPP- and PVC-film -Foil thickness min.: 20 my -Film thickness max.: 50 my -Film overlap min.: 30 mm Machine consists of: 1x Autoloader 1x Sliding feeder (for thicker products) 6x Rotary suction feeder 1x Cavalo feeder (landscape format) 1x Welding device (lengthwise & crosswise welding) 1x Videojet addresser 1x Shrink tunnel

Flat pile feeder, folding unit with 4 pockets, 1 sword folding unit, shed delivery

Key data: 3020 mm, 3 mm

one. Bending cheek presentation, foot pedal Sheet width: 3020 mm Sheet thickness steel: 3.0 mm Sheet thickness aluminum: 4.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: white/blue Total power requirement: 32 A Upper beam stroke: 200 mm Bending angle: 145 degrees Dimensions: 4300 x 2600 x 1900 mm Machine weight: 3960 kg Machine number: 220478

Manual Swivel Bending Machine Specifications: - Max. working width 1030 mm - Max. material thickness 3 mm - Bending angle approx. 0 - 135 ° - lockable with end stop - Upper beam is operated with side hand crank - Max. stroke upper beam 120 mm - Max. adjustment bending beam 45 mm - Bending process is supported by eccentric weight - Space requirement approx. W 1750 x H 1120 x D 450 mm - Weight approx. 620 kg

2006 combination folding unit with 6 buckles 2 folding knives pallet feeder FP 120 Navigator Control noise absorbing hood in production available: immediately location: Germany

Packaging machine Minipack Torre Praktika 56 MPE; good condition; Format 600x400mm; Max. Product height 240mm; Program memory; Foil needle rollers; meter reading only 58,000; New belts for the infeed and outfeed conveyors are included; Roller run-out. Packing machine Minipack Torre Praktika 56 MPE; good condition; size 600x400mm; max.package hight 240mm; program memory; foil perforating unit; counter only 58,000; new belts for infeed and outfeed; Outfeed Roller Band.

Weinig Profiamt 22N four-sided planer Working width 230mmm Working height 120mm Number of spindles 5 1.Bottom 4kw 2.Rights 3.Left 5.5kw 4.Top 5.5kw 5.Universal 4kw Pneumatic material clamps Feed speed adjustable via variator 6-22m/min Feed motor 2.2kw Automatic worktop lubrication Worktop air cushion Length of the material insertion table 1970mm

Weinig Unimat 500 four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Spindle system: 1. Bottom 7.5kw 2.Rights 3.Left 11kw 4.Top 7.5kw 5.Bottom 5.5kw Powercom system Pneumatic clamps divided into 4 sections Feed speed adjustable via inverter Feed drive on gimbals Input table length 1970mm CE Certified

Automatic Foamfoil - Packing machine EASY 250 Special The Easy 250 Special is wrapping your precious workpiece with a foamfoil. So the surface is protected in a perfect way, also in a hardpaper box. The wrapping is in throughfeed and independed of any different width. Made for Batch1. Different length and width in the mix ! The line is mainly existing of: -infeed transport belt with Servodrive for precise positioning, length 2800 mm -First welding station with fast positioning in the width -Center transport belt with Servodrive, length 2800 mm -Second welding station with fast positioning in the width Foil width top and bottom: 260 - 600 mm Foil roll diameter: top and bottom: 800 mm Foam foil thickness appr. 1,0 mm Workpiece length appr. 1500 - 2600 mm Workpiece width appr. 300 - 1400 mm Workpiece thickness appr. 35 - 90 mm

New shrink foil packaging machine Brand: Erregi Type: EASY 250 This plant consists of the wrapping machine and the shrink tunnel. The wrapping machine is formed of a suitably reinforced steel chassis, an infeed and an outfeed conveyor belt. In machine chassis there are the following components: - The driven upper roller - The system for unrolling the lower roller, consisting of a driven roller and a pneumatic assisted idle roller. - The system for welding and cutting the upper and lower PE sheets consisting of a special alu profile, with temperature controll and changable steel blade for carry out the cold cut. - The infeed and outfeed transport belt is likewise made up of reinforced steel chassis on which a closed link belt is mounted. The shrink tunnel consists of two chassises. - One holding the heated part and one supporting the former. - This system wi ...

Specifications: - Max. working width 2020 mm - max. material thickness at 40 kg / mm² strength 2 mm - Bending angle adjustment pre-selectable 0 - 135 ° - Upper bolster clamping via eccentric lever + foot pedal - Largest opening width / stroke of the upper beam 100 mm - Height adjustability of the lower beam 25 mm - Space requirement approx. W 2950 x H 1200 x D 800 mm - Weight approx. 1450 kg

Key data: 6200 mm, 1 mm

Motor scissors, 5 stop fingers, laser protection, with back gauge, Projection: 1000 mm, Colour: blue, Total power requirement: 3 kW, Insertion depth: 1000 mm, with roller shears, number of stands: 5 pieces, opening width: 200 mm, Bending angle: 145 degrees Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Machine Number: 8432

ALD 600 Automatic Pastry Line The ALD is a very flexible and productive line, the dough is gently processed. Suitable for various types of baking and baking pastry dough (with less than 70% moisture content), such as wholemeal, rye, hard, soft dough, with or without yeast, cookie dough, gluten-free, even dough with dry pieces (or other crushed food materials). Working width: 600 mm Capacity: 250kg/hour Quantity: 3000 pcs/h (extruded) Quantity: 3200 pcs/h (wire cut) Facility consisting of: Roller extruder with different shape beams including wire cutting device Spreading device for various product granules Guilotine for strand products Deposition on sheet metal Machine in stainless steel Control via touchscreen display Connected load: 3.8 kW - 400V - 50Hz - 3Ph Dimensions:( L x W x H ) : 600 x 70 x 180 cm

Manufacturer: Pedrazzoli Model: STERN B.65 Year of Manufacture: 2013 Type of Machine: Pipe End Forming Machine Certification: CE Marked Find more here - / Contact us at -

Max. size= 65 x 35 cm, Availability= 032025, izes-max. 350 x 650 mm sizes-min. 70 x 90 mm smallest fold 15 mm Equipment: continuos suction feeder width: 35 cm folding unit 4 bags complete folding rollers neu 2025 Suction drum feeder for papers up to 30 - 180 g/m² Suction drum new in 2025 counter vertikal sheet delivery GUK stream delivery LOT Loaded in truck or container

Manufacturer: Kuper, Type: ST 1 - 100, Year: 1990, Feeding belt mm: ca 2000, Foil wrapping machine mm: ca 1000, Foil stations: 2, Intermediate transport mm: ca 1500, Year :1990

Manufacturer: Schlichter, Type: SCW 14065, Year: 2011, Control: hand, Cycles approx.: 5-8, Schweissrahmenabmessung mm: 1400 X 650, Shrinking tunnel mm: 1400, Outlet conveyor mm: yes, Electrical power shrinking tunnel kW: 18, Heating: elektrisch, Through running hight mm: 350, Working width mm: 800, Folienkern: 900, Folienstärke mu: 8,5-60, Transportsytem: Band, Wight approx. kg: 1000, machine ready for demonstration: yes, Year :12/2011

Manufacturer: Kuper Schrumpffolienanlage Duplex, Year: 1993, Foil wrapping machine mm: 2 Fach, Welding frame dimensions mm: 1500, Intermediate transport mm: 1900, Shrinking tunnel mm: 4600, Outlet conveyor mm: 2500, Total connection value in kW: 65, Foil 1 width mm: 1500, Through running hight mm: 1150 X360 , Required space L x W x H mm: 4600 X 2100 X 1400, Year :1993

Manufacturer: Costa, Year: 1999, Foil stations: yes, Shrinking tunnel mm: 1700, Year :1999

Manufacturer: MSK, Type: 290, Year: 1989, Cycles approx.: max ca. 240 / h, Electrical power shrinking tunnel kW: 366 kW - Gas, Through running hight mm: 2200, Working width mm: 800, Länge max 1200 mm, Year :1989

REF-0 ULMA SLX-305 L-SEALER WITH TR-100 SHRINK TUNNEL Automatic angular L” sealing machine with shrink tunnel. Manufacturer: ULMA. 1) Sealer model SLX 305: − Year: 2020 − Serial no.: 4515898 − 400 V / 50 Hz / 3.5 A / 3PH − Total power: 2.6 kW − Overall dimensions: 2,400 x 1,500 x 1,720 mm (LxWxH) − Maximum sealing bar dimensions (max. package dimensions): 550 x 550 x 200 mm (LxWxH) − This machine can be used not only for packaging with shrink film (when used together with the shrink tunnel), but also with non-shrink film 2) Shrink tunnel model TR 100: − Year: 2020 − Serial no.: 1511748 − 380 V / 50 Hz / 25 A / 3PH − Total power: 24 kW − Overall dimensions: 2,000 x 1,400 x 1,200 mm (LxWxH) − Chamber length: 1,335 mm − Aperture: 400 x 230 mm (WxH) Overall dimensions of the set: 4,000 x 1,500 x 1,720 mm (LxWxH)

Manufacturer: Kuper, Type: KFE TAN 2 1600/450, Year: 1979, Control: Kuper, Foil wrapping machine mm: 1600, Foil stations: 1, Welding frame dimensions mm: 1450, Intermediate transport mm: 3.000, Shrinking tunnel mm: 4.800, Schrumpftunnel kW Leistung: 70, Heating: Elektro - 59 kW, Through running hight mm: 200, Working width mm: 800, Conveyour system: Band/Stange, Year :1979

Manufacturer: Fischer Schrumpffolien Verpackungsanlage, Type: SFV 80, Year: ca.1990, Feeding belt mm: no, Foil wrapping machine mm: yes, Foil stations: 1, Welding frame dimensions mm: ca 140 x 120 , Shrinking tunnel mm: yes, Outlet conveyor mm: no, Schrumpftunnel kW Leistung: ca.30, Heating: elektrisch, Foil 1 width mm: ca.450, Lifting krane: no, Year :ca.1990

Manufacturer: Maskiner Verpackungsanlage Laminat, Year: 2001, Cycles approx.: ca.6, Feeding belt mm: 200, Foil wrapping machine mm: Maskiner , Foil stations: 2, Intermediate transport mm: 1500, Shrinking tunnel mm: 3500, Outlet conveyor mm: 2500, Schrumpftunnel kW Leistung: ca.30, Foil 1 width mm: ca max.650 mm, Foil 2 width mm: ca max.650 mm, Through running hight mm: 200, Working width mm: 300, Year :2001

Inv. Num. : 8297 Type: F146 Producer: SIAT Created: 2004 Parameters: Box size: 580 x 380 x 416 mm

Manufacturer: Maskiner, Type: LPFK 2P 400 HKM, Year: 1997, Steuerung : Programm, Foil wrapping machine mm: yes, Foil stations: 2, Intermediate conveyor mm: yes, Shrinking tunnel mm: 300, Auslaufband mm: no, Electrical power shrinking tunnel kW: ca 30, Gesamtanschlusswert kW: 30, Foil 1 width mm: variable, Foil 2 width mm: variable, Through running hight mm: 150, Working width mm: 220, Year :1997

Key data: 2500 mm, 2 mm

with foot switch, with simple control up to 6 bending angles, potentiometer preset, manual bending beam lowering, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2500 mm Sheet thickness steel: 2.5 mm without backgauge Colour: green Total power requirement: 16 A Space requirement: approx. 3400 x 1000 x 1600 mm Machine weight: 2000 kg without roller scissors Bending angle: 145 degrees Machine Number: 50/3

Key data: 3020 mm, 2 mm

with motor backgauge, numerical NC control, manual bending beam lowering, foot switch Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3020 mm Sheet thickness steel: 2.0 mm Sheet thickness aluminium: 3.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: green Total power requirement: 400 V Dimensions: 3800 x 1000 mm Machine weight: 4500 kg Upper beam stroke: 200 mm without roller scissors/ Opening width: 200 mm

max. format 78 x 115 cm Year of construction 2002 MC Control Counting device MCC 3 Round stack feeder Dual feed 6 fold pockets in the parallel fold section Downstream knife shaft Window rebate bag Vertical stack delivery Delivery date: immediately Price on request. We supply and install worldwide.