gear machine fo used for sale

Key data: 2040 , 2

Motorized swivel bending machine Manufacturer Fasti Type 2095-20-2 Sheet power 2040 x 2 mm at 400 N/mm2 Digital display of the bending angle Foot pedal Notaus Power connection 400V

Furnace 650 inner 1x1x2m t max 650C PLC could be various size Ölbrenneranlagen Retortenöfen Teil-Vakuum Rollenherd - Durchlauföfen Rohrglühöfen Salzbadöfen Schmiedeöfen Schachtöfen Stoßöfen Schüttelherd - Härteöfen Schutzgas Topfglühöfen Tiegelschmelzöfen Truhenöfen Transporttiegel für Flüssigmetall Transport - Warmhalteöfen für Flüssigbeschickung Umschmelzöfen für Aluminium Verzinkungsöfen Vergüteöfen Warmhalteöfen

complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR

large working width: 2040 mm for sheets up to: 4.5 mm Opening width upper cheek: 320 mm Adjustable bending cheek: 120 mm Upper cheek drive: 2.2 kW Under-wall drive: 2.2 kW electr. Connection: 5 kW Weight: 3700 kg Space requirement: 3250 x 1000 x 1900 mm

M. No.: 3284 Equipment / Additional information: (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe ...

gebr. Fork kneader AO 170, for 80 kg flour, stainless steel fork, stainless steel boiler, overhauled

Four-sided planing machine Harbs 250 x 150 mm 7 spindles 350 hours of uptime 3 m1 dressing table 8 newly rubberized feed rollers Grooved bed The machine is practically as good as new, ready for operation Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

Sind Hamburger forming machine

ILLIG STAL80 Trim Press, age 1988:- Technical data ILLIG STAL 80 :  Punching table area max. 1000 x 510 mm  Material width max. 800 mm  Infeed length 20 - 400 mm  Stroke height 200 mm  Mold height 272 mm Part height (positive and negative) max. 100 mm  Number of strokes (infinitely variable) 25 - 130 /min Trimmed Parts are stacked through the Punch Tool The Skeletal Waste is fed directly into the Grinder ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, age 1995

Hydraulic swivel bending machine - ordering machine (delivery time approx. 10-14 weeks), incl. hydraulic dynamic crowning, touch screen, Pressure regulation of the upper cheek, backgauge (1000mm), goat feet with automatic tool clamping, electr./hydr. Adjustment of the bending cheek -Illustrations similar-

Max Size 520 x 850 mm Min size 100 x 120 mm 4 Buckles Noise hoods High speed feeder head Digital counter with program 1 Electronic knife Hook on shingle belt delivery Implant machine Very good conditions

Reference Num.: 3384 Brand: Herzog Heymann Type: M3 + S18 Construction year: 1969 Available: directly Status: In production Location: Deutschland Equipment: - 4 Falztaschen - Flachstapelanleger - Schuppenauslage - Falzwerk Typ S18 mit 4 Taschen

Reference Num.: 3527 Brand: MBO Type: T 500 Construction year: 1995 Available: directly Status: In production Location: Deutschland Equipment: - Format 50 x 70 cm

Key data: 8 , 600 , 230

High-performance industrial planing machine In good condition, lots of accessories '

Used flow pack packaging machine. Manufacturer Chemosvit Strojchem, model BH-07W. New 2017. Capacity 15-250 pcs/min. Available 3 pcs. (2 used and 1 almost unused)

Folding machine Shoei Model Mach Eight Year 1995 Serial 7092 Size Min: 150 x 210 mm / Max: 470 x 640 mm Feeder suction wheel + stream feeder Folding configuration 2 plate buckles + 1 knife Delivery detachable belt delivery Details Vacuum pump, noise hood, electronic speed control, sheets separations head Condition Rollers, belts, vacuum roller are all good Available direct

I sell the four-side planer Futura P-MAX 23/5+UNIV, built in 2008. 6 Spindle: bottom - right - left - top - bottom - universal Electronic programming for working width, working height and feed speed. Element max. 230x170mm ! All 6 spindles 6000 rpm. Material prints for short elements. Weight 2500kg. 1-zone pneumatic material pressure system for feed Fully operational. Available the same. Exhibition machine, has worked very little !

Flatpile Feeder, 4 Pockets, Delivery

Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!

Folding carton boarding machine Uhlmann C 100 LB • Format range folding carton B 30-100, H 15-75, L 70-200 mm • Capacity 10-80 folding cartons/min, clocked • For offset plug-in closure on both sides • Product feed for blister via blister stack shaft • Code reading Laetus Argus for 2x brochure code (front + back), 1x folding carton code, 1x brochure absence in folding carton • Brochure folding and inserting machine from the magazine GUK FA 21/4 Cartonac 91 • Colour embossing station for folding flap opposite the insertion side, 2-line, with embossing numbers • Poor ejection with ejection counter-control • Vacuum generators • SPS Eberle PLS 514 • Connection 400V/50Hz Optional: - New hardware/software Mitsubishi with 8" color Tuach Panel - Code reader Cognex - Validation documentation

DESCRIPTION: • Format range folding carton B 30-100, H 15-75, L 70-200 mm • Capacity 10-80 folding cartons/min, clocked • For offset plug-in closure on both sides • Centrally adjustable cup chain • Product feed for blister via blister stack shaft • Monitoring of packaged goods height in cup chain • Code reading Laetus Argus 4 for 2x brochure code (front + back), 1x folding carton code, 1x brochure presence in folding carton • Brochure folding and inserting machine from the magazine GUK FA 21/4 Cartonac 91 • Colour embossing station for folding flap opposite the insertion side, 2-line, with embossing numbers • Poor ejection with anti-ejection control • Vacuum generators • SPS Eberle PLS 514 • Connection 400V/50Hz

Make MBO. Model K820-4KZ Year 1994/1995 Size Min: 150 x 210 mm / Max: 820 x 1200 mm Feeder MBO F820 Flatpile feeder - with MBO Vaculift sheet seperation head and MBO Vacubelt suction belt Folding configuration 4 platebuckles + 2 knives with exit to left or right + MBO Z knife for 32 pages Delivery Lega 30/55 pressing upright delivery Details Vacuum pump, noise hoods, batch counter

Ser. No.: L. 09/31 // Fabr. No.: 0270180/1 Pockets : 4 parallel fold Format (mm): max. 297 x 420 // min. 148 x 210 Equipment / Additional information: With delivery A45/1A-DC Power 400V

Part Number 6338 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 160mm 5,5kW 3) vertical left 160mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 7,5kW 6) horizontal bottom 230mm 7,5kW 7) universal 360° 230mm 7,5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - all spindles equipped with a brake - spindle speed 6000rpm in advance: - 6 pulling, toothed, metal introductory shafts, including 2 double - 4 pulling shafts, rubber including 1 double - 3 clamps on the lead bottom: - pressure from the side on the inlet - introductory shaft, toothed, pulling, swivel in the lower table top - 3 pull rollers, metal, smooth - pneumatically adjustable shafts - length of the introductory table top 1190mm - central lubricati ...

Pastry moulding machine Kalmeijer KGM biscuit moulding machine Pastry moulding machine Type: Kalmeijer KGM with 2 forming rollers 10 baking trays thickness of the dough figures is adjustable Dough hopper, forming roller, dough feed roller is easily removable for cleaning Easy to use The trasnport belts for the sheets can be folded in and out Machine requires little space Machines can be driven on rollers Dimensions: Height: 122cm Width: 170cm Depth: 52cm

Part Number 6368 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 130mm 5,5kW 3) vertical left 130mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 11kW 6) horizontal bottom 230mm 18,5kW 7) universal 230mm adjustable at 360 degrees 5.5kW - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 electrically adjustable up/down - from above 8 metal pulling introductory shafts, swivel including 2 double - from above 4 pulling rollers, rubber - pressure from above 2pcs - from the bottom of the ratchet - from the bottom from the side 3 clamps - from below 2 metal rollers, smooth, pulling - from the bottom 2 double rollers, pulling, rubber - pneumatically pressed shafts ...

Part Number 6393 TECHNICAL DATA - max width of the workpiece 200mm - max height of the workpiece 150mm - number of spindles 4: 1) horizontal bottom 200mm 5,5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal upper 200mm 5,5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000rpm in advance: - pulling introductory shafts, toothed 6 pcs including 2 double - 1 pulling shaft, rubber bottom: - introductory shaft toothed, pulling, torsional in the lower table top - side pressure 3pcs - lead roller, pulling, metal, smooth - all pneumatically pressed rollers - length of the introductory table top 2130mm - table top adjustable up / down - central lubrication - electrical setting of planing thickness - lifting motor 1,1kW - smooth regulation of the feed speed on the inverter - feed motor 3kW - feed  ...

1250 x 2500mm TLF 2000w Laser STOPA Sheet storage, SheetMaster, ToolMaster, SortMaster Year: 2005

Very nice Heidelberg Stahlfolder TI 52 with 4 pockets. it is still in production, 180 m/min, built in 2001

Folding machine MBO T49/4, machine number 83067246, 4 pockets + delivery, flat stack feeder, counter, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

- Pallet feeder T 1020 FP 112 - 1. Station T1020-1-1020/6 buckles - 2. Station T800-M-2-88/6 buckles - Z2 mobile cross fold station - DESTA FSA 1000 delivery (1996)

Pallet feeder FP 120 Navigator control 6 folding pockets in the parallel fold section 2 folding knives in the cross fold section 1 additional folding pocket after the 1st cross fold Window cassette Crossfold section can be lifted up for servicing rollers Pocket rollers can be pulled aside for servicing Noise absorbing hood Rollers in good condition Without delivery Included: MBO FW II-560/4 Second unit (variable) width 56 cm Station: 4 folding pockets 56 cm following knife shaft noise absorbing hood

NEAGARI SHIBUYA Radial Forging Machine Model BF-350 New 2010 Specifications 1. Machine components (1) Bar-Forging Machine: 1 set (2) Manipulator: 2 set (3) Hydraulic System: 1 set (4) Electric Power & Control System: 1 set (5) Foundation: 1 set (6) Unloader: 1 set (7) Work Support: 6 set (8) Work Support (center): 2 set (9) Mandrel (IN): 1 set (10) Mandrel (OUT): 1 set (12) Die Changing Unit: 1 set 2. Work Piece 2-1. Material (1) Tool Steel (EX. DIN-X40CrMoV51AISI-H13JIS-SKD) (2) C-steel 2-2. Starting Dimension (1) Round: max. diameter 450mm (2) Square: max. flat to flat 240mm (3) Max. Length: 3500mm (4) Max. Weight: 3000kg 2-3).Forged Dimension (1) Min. Diameter: 80mm (2) Min. Square: 120mm (3) Max. Length: 8000mm (4) Max. Weight: 3000kg 3. Bar Forging Machine 3-1. Forging Ability (1) Number of rams: 4 (2) Force / ram: max. 7000kN (3) Hydrau ...

Hamburger forming machine, Sind, NEW Capacity: 2100 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

Hamburger forming machine, Sind, NEW Capacity: 1000 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

Main drive = drive unit with motor and gearbox: SEW-Eurodrive K76 DT100LS-4TF/VS with motor fan A2E200-AA01-65

2018 Forge from 60 to 400 Ton Forging and Annealing Furnace ATI furnace It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm

I sell the moulding heads for the automatic fourside moulder WACO Weinig Gruppe. Inside diameter 50mm Outside diameter (with knives) 170mm Body diameter 155mm 15 pcs. working length 200mm (without knives). 8 pcs. working length150mm (with knives) Each with Hydro holding. Price per pc. 500 euros. Sellable per pc. or totally together. Available immediately.

Heavy high-performance planer designed for maximum feed performance and productivity. Designed for rough use in planing and sawmills. Suitable for the processing of planed goods and slats. Special features: Left version. for wood widths up to 360 mm. Machine we sell as used. But the machine never ran. Electrical part still has to be built by Ledinek - here adjustments are possible (axe positioning, FU-s, 400V or 480V etc.). Price is for the variant in the PDF description. Adjustments on request. Drive motors available.

Control panel Pacmation made of Uhlmann C130 YOC 1996

ORDER NO. 6575 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 170mm - 7 spindles: 1) horizontal bottom 230mm, 11kW 2) vertical right 170mm 3) vertical left 170mm (2 and 3 spindle), 11kW 4) horizontal right 170mm, 5.5kW 5) horizontal upper 230mm, 11kW 6) horizontal bottom 230mm, 7.5kW 7) universal 230mm, adjustable at 360°, 7.5kW - all spindles adjustable up/down, right/left - spindle 3 and 5 electrically adjustable - ATS - spindle diameter 40mm - electric brakes - from above 4 pulling introductory shafts, toothed including 1 double - from above the introductory roller pulling rubber double - from above the shaft leading out, pulling, rubber, double - from below 2 metal rollers, pulling, smooth - pulling roller, rubber, double - feed on cardan rollers - pneumatically pressed shafts - smooth adjustment of the feed spe ...

6 Pockets, 2 Knives

Janssen Pastry Moulding Machine Type: FM128 K4 with 1x speculoos roller Extra rollers available at extra cost Band width: 23.5cm with heating Height: 145cm Width: 80cm Depth: 50cm

Pastry moulding machine Type: Kalmeijer KGM with 2 forming rollers (speculoos + . ) thickness of the dough figures is adjustable Dough hopper, forming roller, dough feed roller is easily removable for cleaning Easy to use The trasnport belts for the sheets can be folded in and out Machine requires little space The machine is in need of overhaul Dimensions:  Height: 122cm Width: 170cm Depth: 52cm

(Serial No. M12/42), Flatpile Feeder, Overhead Control Panel, 4 Pockets, 1 Cross Fold Knife, Delivery

Price in euros without VAT: 5500

Feeder bottom suction wheel Folding configuration 2 platebuckles Details Stahl EZ32 counter, noise hoods, vacuum pump Condition after order we will install new suction wheel Available direct

Manual machine for foiling products in trays For the packaging of food products with CSF placed in plates or on a cardboard or other material, the packaging cuts and sticks when the substrate is lightly pressed on the heating plate! The machine is designed so that there is no need to adjust the temperature of the bonding heater and linear knife. Foil width from 250 – 500 mm. Technical data: Power: 100 watts, heated plate 150 watts Operating temperature: thermo knife 100°С -140 °С, heated plate 90°С -140 °С Productivity: 6 opac. / min. Dimensions: 590 x 700 x 250 mm Weight: 8.5 kg.

Year: ca. 2001 Serial No. R11/47, Roundpile Feeder with Overhead Digital Panet, HSS Gluing System, 1st Station: 4 Pockets, 2nd Station: 4 Pockets, 3rd Station: 2 Pockets, MBO X Mobile Knife for 32 Pages, Pressing Delivery