gear machine fo used for sale

Saw blade Ø: 355mm - Mitre angle max.: 45° - Motor power (kW): 3.50kW - Connection: 220V - Machine weight: 25kg Auction-ID: A1-40324-136

used RAS channel folding machine, with seal set, auto-pilot Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Sheet thickness max. steel 0.5 - 1.0 mm Smallest duct cross-section 100 x 100 mm Throughput speed approx. 15 m/min Support height up to approx. 700 mm Support length inlet/outlet approx. 1500 mm Support Arms 2 x 3 Working height approx. 800 mm Machine length approx. 5350 mm Machine width approx. 1000 mm Weight approx. 710 kg Drive power max. 5.5 kW Machine number 8826

Key data: 4040 mm, 1 mm

used Schechtl swivel bending machine, with roller shears on the upper beam, Two foot switches, attachment rail 10 and 20m m Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Working length: 4040 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Sheet thickness front: 1.0 mm without backgauge Colour: grey/blue Total power requirement: 16 A Dimensions: 4965 x 720 x 1220 mm Machine weight: 3950 kg Upper beam stroke: 140 mm with roller scissors/ Opening width: 140 mm Bending angle (max.): 160 degrees Underbeam adjustment yes Machine number: MA7675

Key data: 3040 mm, 1 mm

used Schechtl manual bending machine, with foot lever Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Working length: 3040 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 1.75 mm without backgauge Colour: green Dimensions: 3800 x 800 x 1400 mm Machine weight: 1700 kg Upper beam stroke: 140 mm without roller scissors/ Opening width: 140 mm Bending angle (max.): 160 degrees Underbeam adjustment: 25 mm Machine number: 20592

Offer 26308 Technical data: - Max. working width 3040 mm - max. material thickness at 40 kp / mm² strength 2 mm - Bending angle adjustment electronically 0 - 180 ° - Automatic follow-up control for a complete workflow - Highest working setting of the upper beam 250 mm - Largest opening width / stroke of the upper beam 350 mm - Height adjustability - bending beam 30 mm - the lower beam 90 mm - Upper beam drive 400 V / 1.5 kW - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 4450 x H 1650 x D 2100 mm - Weight approx. 3900 kg - with: - pointed rail + lower beam rail - E - Footswitch

Cartoning machine for plug-in closure

Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools Auction-ID: A1-40324-129

Auction-ID: A1-50226-8

2 tube end forming machines Auction-ID: A7-50851-91

Application: Automatic packaging of: potatoes / onions / carrots / other fruit and vegetable products Works with roll stock PE film, where the bag is automatically shaped, filled and sealed. This type of machine is widely used in potato and onion packing lines. Version: Rollstock film holder / Automatic bag formation / Throughput conveyor belt / Sealing unit / Pneumatic operation / Siemens LOGO! PLC control / Omron VS Mini J7 frequency converter / stainless steel/product contact parts / CE version Suitable for coupling with weigher or dosing unit technical data: Capacity: approx. 10–25 bags/minute (depending on product and weight) Bag weights: about 2.5–25 kg Power supply: 400 V Compressed air: 6–8 bar Power: approximately 4–6 kW Auction-ID: A1-47393-271

Compact VFFS machine that forms, fills and seals bags, This Audion turns a reel of film into pillow bags: the film is formed around the filling tube, sealed along the seam and closed at the bottom, after which the product drops into the bag from above. Suitable for dry, free-flowing products such as pasta, snacks or cut vegetables, fed by a weigher or doser., It is built compactly on a stainless frame with castors and has a touchscreen with adjustable seal temperatures. We did not find a rating plate with the model or year., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/audion-vertical-form-fill-seal-machine/ , Type: Vertical form fill seal machine (VFFS), Bag style: Pillow bag, Film transport: Two pull belts along the filling tube, Controls: Touchscreen, adjustable seal temperatures, C ...

Single folding machine Heidelberg Postpress, type RFH-82, built in 2005, Delivery and banding machine system, Fabr. Palamides, type Delta 703 Destacker Heidelberg Stahlfolder, Station PD-94-T Pressing and banding delivery Palamides Delta 1005 Folding machine Heidelberg, product 2TD-94, year 2006, 10 bags, Product PD-94, year 2006, Pressing and banding delivery Palamides Delta 1005, built in 2007 Folding machine Heidelberg, product 2TD-94, year 2005, Product SSP-94. D, year 2005, Banding and stacking delivery system Palamides, type BA-900, year 2001 Single mailer machine Stahl GmbH & C, station D 66-M, 8-bag Folding machine Heidelberg Postpress, type RFH-82, built in 2005, Delivery and banding machine system Palamides Delta 703

Offer 26236 Technical data: - Max. working width 3040 mm - Max. material thickness ST 37 4 mm - Swing-out upper beam - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Max. lifting height of the upper beam 350 mm - Lifting height of the upper beam can be electronically preselected - Adjustability - bending beam 125 mm - The lower beam 125 mm - Upper bolster drive 400 V / 4.0 kW - Bending beam drive 400 V / 5.5 kW - Space requirement approx. W 3950 x H 1600 x D 1200 mm - Weight approx. 4800 kg - with: - Footswitch - Bending rails - Backgauge

Manufacturer: KAO FONG MACHINERY CO., LTD. (KAFO) Year: 1990 Type: CNC Vertical Machining Center Numerical Control: FANUC Series 15-M Axes: 3-axis (X, Y, Z) Strokes: X 1030 mm / Y 210 mm / Z 610 mm Spindle: BT40 – up to 6000 rpm – power approx. 11 kW Tool magazine: 20 positions BT40 Weight: approx. 6000 kg Origin: Taiwan Notes: Robust CNC vertical boring milling machine for general machining. Auction-ID: A1-50714-4018

The Thimonnier M3200 is an automatic double head vertical form / fill / seal machine (Vertical FFS) to pack liquid & viscous products in pillow pouches using rolls of polyethylene. Possible products are: pasteurized milk / water / fruit juices / curdled milk / liquid yoghurt / nectars / cream / greek yoghurt / kefir / smetana / rayeb / sauces / soups or syrups. The pouches are continuously filled from an over tank headed with constant level and controlled by a proportional valve and a level sensor.The machine is very flexible and reach high output and high dosing accuracy. Strong frame made from steel profiles covered with stainless plates for maximum rigidity. A Clean-in-Place (CIP) has been integrated into the M3200’s design. All of the parts that come into contact with the product are built from stainless steel. Rate of production: 5.000 - 8.000 pouches per hour. Bag volume: 70 - 1. ...

Offered for sale is a vertical form-fill-seal machine with dosing and filling unit. Control system: HASSIA REDATRON machine control system without LCD display, membrane keypad, recipe memory, parameter management and emergency stop switch. Equipped with stainless steel product container, conical dosing hopper, pneumatically operated dosing unit, film roll holder, film guide, forming collar, vertical film forming, sealing unit and transparent protective enclosure. Inspection possible by arrangement.

- Covering of moulding ends with hot melt paper. - Vertical pneumatic clamping gripper. - Maximum workpiece dimensions approx. 1100 x 200 x 75 mm. - Adjustable temperature. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-12

Essegi vertical bag form-, fill- and seal machine for liquids, model: F 700 Pneumatic, serial number: 26/2010, 400 V, 3 Ph, film width: 644 mm, pipe clearance: 220 mm x 95 mm, vertical seal: 620 mm, horizontal seal: 355 mm, total dimensions: 2450 mm x 1300 mm x 2800/2320 mm. Used for milk in 500 ml bags.

PFM vertical bag form-, fill- and seal machine for liquids, model: Zenith milk, serial number: C 8413, year of construction: 2007, 380 V, 50 Hz, 8 A, 4.5 kW, weight: 800 kg, film width: 460 mm, pipe diameter: 130 mm, (2x) 100 mm and (1x) 60 mm, vertical seal: 400 mm, horizontal seal: 250 mm, total dimensions: 2000 mm x 1400 mm x 3000 mm. With extra parts.

PFM vertical bag form-, fill- and seal machine, model: PV 260, serial number: 3938, year of construction: 1994, 380 V, 10.5 A, 4 W, film width: 300 mm, pipe diameter: 75 mm, vertical seal: 160 mm, horizontal seal: 260 mm, total dimensions: 1800 mm x 1600 mm x 1830 mm. With infeed belt, inside dimensions: 1560 mm x 700 mm x 410 mm, plastic belt with dividers, belt width: 250 mm, compartments:(2x) 75 mm x 90 mm x 50 mm, elevating height: 2300 mm, total dimensions: 3750 mm x 1430 mm x 2500 mm.

Ilapak vertical bag fill-, form-, and seal machine, model: Vegatronix 2000/400, diameter filling pipe: 170 mm, vertical seal length: 400 mm, horizontal seal length: 400 mm, mesh bag width: 600 mm, plastic belt, belt width: 300 mm, elevating height: 700 mm, total dimensions: 3900 mm x 1640 mm x 1870 mm.

Pneumatically operated, connection: 230 volts Auction-ID: A1-50060-69

press pressure: 1000KN, punching surface approximately: 2x L900 x W720 mm, equipped with motor-driven roller conveyor, 1x support infeed table, 1x oil pump generator, motor power: 7.5 KW, 1x Sigmatek ET 243 operator panel, 1x mobile extractor, and personal fencing protection with Sick laser curtain protection. Includes rack filled with leather dies and 2x green plastic plate Auction-ID: A1-50060-9

VERTICAL AXIS GRINDING MACHINE Inv. No. 12.903I1 Make DELTA Model LB300 Distance column/wheel axis 300 mm Distance table level/wheel 280 mm Max. grindable surface 140 x 330 mm Rapid feed per turn handwheel 2 mm Size of the cup-wheel 178 x 78 x 78 mm Dimensions abrasive segments 50 x 16 x 90 mm RPM of the wheel 2840 rpm Motor power 2.2 KW Auction-ID: A1-50718-33

Dimensions magnetic clamping plate 600x300 mm, max. grinding range 650x300 mm, electromechanical transverse movement 300 mm, max. table load 300 kg, travel X-axis 840 mm, travel Y-axis 310 mm, automatic depth adjustment Z-axis, connected load 8 kW Auction-ID: A1-50626-9

Key data: 3100 mm, 1 mm

used Schechtl folding machine, with factory-repaired control, CNC control (without graphics) with motor stop, foot switch, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 3100 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Sheet thickness front: 1.0 mm Back gauge (max.): 8 - 1000 mm Colour: grey/blue Total power requirement: 16 A Dimensions: 4207 x 1842 x 1745 mm Machine weight: 3100 kg Upper beam stroke: 140 mm Opening width: 140 mm Bending angle (max.: 160 degrees Underbeam adjustment yes Machine number: MA 6041

Manufacturer: HSM Hohenloher Spezial-Maschinenbau GmbH & Co. KG, Germany Type / Model: HSM 405 H2 Year of manufacture: 2008 according to the nameplate Chassis No.: 4685 Machine type: self-propelled forestry machine with 8-wheel chassis, crane and forestry unit Operating hours: not known / no information available Permissible Total weight: 18,000 kg according to the nameplate Net weight: approx. 18,000 kg plus special bodies according to operating instructions Engine: Iveco NEF, 6-cylinder common rail turbo diesel Power: 175 kW / 238 hp Displacement: 6.7 liters Torque: 1,020 Nm at 1,500 rpm Drive: hydrostatic-mechanical, NAF 2-speed transfer case Pulling force: 175 kN Differential locks: 100% shiftable front and rear Steering: articulated frame steering, 2 steering cylinders, steering angle 52° Hydraulics: Load-sensing, working pressure up to 380 bar, hydra ...

- Covering of moulding ends with hot melt paper. - Vertical pneumatic clamping gripper. - Maximum workpiece dimensions approx. 2400 x 200 x 75 mm. - Adjustable temperature. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-86

sheet width:5040 mm plate thickness:2 mm total power requirement:12 kW weight of the machine ca.:9,4 t dimensions of the machine ca.:6200× 1300 ×1900 mm working width:5000 mm control:Fasti Matik stroke of upper beam:500 mm adjustment of lower beam:u.Biegewange 80 mm control cabinet:1000 x 850 x1450 mm Documents:vorhanden

Incomplete Thimonnier M3200 which is an automatic double head vertical form / fill / seal machine (Vertical FFS) to pack liquid & viscous products in pillow pouches using rolls of polyethylene. Possible products are: pasteurized milk / water / fruit juices / curdled milk / liquid yoghurt / nectars / cream / greek yoghurt / kefir / smetana / rayeb / sauces / soups or syrups. The pouches are continuously filled from an over tank headed with constant level and controlled by a proportional valve and a level sensor.The machine is very flexible and reach high output and high dosing accuracy. Strong frame made from steel profiles covered with stainless plates for maximum rigidity. A Clean-in-Place (CIP) has been integrated into the M3200’s design. All of the parts that come into contact with the product are built from stainless steel. Rate of production: 5.000 - 8.000 pouches per hour. Bag vo ...

Incomplete Thimonnier M3200 which is an automatic double head vertical form / fill / seal machine (Vertical FFS) to pack liquid & viscous products in pillow pouches using rolls of polyethylene. Possible products are: pasteurized milk / water / fruit juices / curdled milk / liquid yoghurt / nectars / cream / greek yoghurt / kefir / smetana / rayeb / sauces / soups or syrups. The pouches are continuously filled from an over tank headed with constant level and controlled by a proportional valve and a level sensor.The machine is very flexible and reach high output and high dosing accuracy. Strong frame made from steel profiles covered with stainless plates for maximum rigidity. A Clean-in-Place (CIP) has been integrated into the M3200’s design. All of the parts that come into contact with the product are built from stainless steel. Rate of production: 5.000 - 8.000 pouches per hour. Bag vo ...

5-color R23847/15 PROPHETEER flexographic printing machine 18" Model: 1800 Built: 1998 available: immediately 5- Colors for labels and other products e.g. for cups / cups 18 Corona Car register Stacker Video Scanner Flat-in diameter: 1016 mm Available: immediately

Radial drilling machine, used radial drilling m/c, used Type: BR 56 x 1600 Manufacturer/ make: WMW Year built/ year of make: 1965 Extension/ length of arm: 300...1600 mm Ma. Drilling radius / max. drill. Radius: 1800 mm Drilling capacity at boring: 56 mm ( St 60 ) Drilling capacity at boring: 80 mm ( GGL 20 ) Thread cutting/ thread cutting: max. 65 mm ( St 36 ) 76 mm ( GGL 20 ) Drilling depth/ drilling depth: 400 mm Tool holder / taper in spindle: MK 5 Removal spindle head to base plate/ distance Spindle head to base: max. 1600 mm Base plate/ base: 1700 x 1000 mm Speed range/ range of speeds: 14..1800 rpm Feed: 0.0315 .. 1.6 mm/U// mm per round Connection value: 7.13kW Weight: about 4.5 t

Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location  ...

4-color R23240/17 SHIKI label press Model: PC 45 M Built: 1992 Web width: 280 mm Availability: instantly 3 - coloured or 4 - coloured (optional) Printing width: 270 mm, min. 50 mm max. feed: 7, approx. 180 mm Accessories: Rolling unit for rollers up to 100 cm in diameter Winding unit for small rolls pneumatic remaline hole on both sides Speed: 7000 cycles/h max. Products: Hole edge adhesive labels, adhesive labels, hole edge cardboard labels, tickets with and without printing - can punch, print, embosse, number, perforate, punch Available: immediately

R26107/09 FISCHER & KRECKE Two-sewn flat bag machine Model: Perfect Built: 60s available: immediately Bag width: 80 - 200 mm Bag length: 160 - 480 mm 4-colour printing unit Available: immediately

refurp-up in 2007 Spare parts Still in operation: Yes Available: immediately

Format: 700 x 1020 mm R26060/18 SAKURAI screen printing machine Model: SCA 102 Built: 1989 max. print size: 700 x 1020 mm Availability: instantly automatic screen printing line high speed cylinder Special version: min: 500 x 350 mm Sheet transfer station can be folded on one side optical front edge control mechanical double-arch control via friction rollers pneumatic squeegee pressure control and sieve clamping PERFECTION high-performance dryer 1120/4: Inlet width 1100mm, 2 warm and 2 cooling zones with UV dryer MIRUS forklift model SV Etc. Available: immediately

R26115/18 VITS Impregnation and painting system Model: IPA / S / II Built: 1996 Working width: 2200 mm for finish foil and edges Working width: min. 625 mm Heating: Thermal Oil 250 Dryer control: 80 - 220 Speed: 5 - 120 m/min Impregnation plant Painting works Takeup with thermal oil boiler for impregnating, painting of decorative and similar papers from 30 - 240 g/m2 Available: immediately

CAP.: 10 000 BTLS/H OF 1.5 L,

BOTTLES & JARS!

Machinery and equipment for the production of cement, All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own e ...

8-color format: 70 x 100 cm<br><br><br><><<br>Verf Gbar: Instant

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

Machinery and equipment for the production of concrete blocks, All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buye ...

Ladies and gentlemen, we offer: Machinery and equipment for stone production All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own ex ...

Main product investors Product accelerator Suction opening station 2 Product supplement investors End element with discharge Dashboard Band display 1 compressed air/vacuum pump Still in operation: No Available: immediately

in 2005 refurbished Still in operation: Yes Available: immediately

Type: MST. Strapping machine with 6 new replacement strap coils, 0,9 kW.

Ladies and gentlemen, we offer: Machinery and equipment for the production of roof tiles, Machinery and equipment for stone production All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and load ...