gear machine fo used for sale

Electric forklift, electric stacker, e-stacker, 3-wheel forklift -Manufacturer: Toyota, Electric forklift 3-wheel forklift type FBESF 15 -Load capacity: 1350 kg -Lifting height: 3300 mm -Voltage: 24 volts -Tine length: 1090 mm, cross section 80 x 40 mm -Equipment and accessories: Sideshift, clear-view mast, charger, lighting system -Operating hours: 20293 h -Battery: ibv type 8 PzS 920 K 24 V built in 05/2009 -Forklift dimensions: 1780/1050/H1980 mm / with mast height 2120 mm -Weight: 2800 kg

Lifting mast, stacker mast, forklift mast, lifting frame, rear forklift -Manufacturer: Baumann, forklift mast from sideloader -Type: unfortunately no type designation -Load capacity: 2500 kg -Lifting height: mm -Recording/Dimensions: see photos -Dimensions: 3940/1680/H2060 mm -Transport dimensions: 3940/1680/H700 mm -Weight: 1800 kg

Four-rope clamshell grab, mechanical clamshell grab, shell grab, ship unloading grab, rope grab, digging grab -Condition: New -Manufacturer: LAUDI GVE, four-rope clamshell grab type VZG ship unloading grab -Max. payload of the gripper: 5600 kg -Height of the closed gripper: 3810 mm -height of the open gripper: 4000 mm -Shell width: 2500 mm -Opening width: 4000 mm -Distance between the locking cables: 522 mm -Spacing of the holding cables: 180 mm -Gripper suspension: Q-Gripper -Bulk density: 0.4-0.8 t/m³ -Transport dimensions: 2480/4180/H2500 mm -Own weight: 4400 kg

Lifting mast, stacker mast, forklift mast, lifting frame, sideloader -Manufacturer: Baumann, forklift mast from sideloader type E4S 25/14-13.5 -Load capacity: approx. 2500 kg -Lifting height: mm -Recording/Dimensions: see photos / technical drawing -Transport dimensions: 3900/1445/H700 mm -Weight: 1630 kg

Four-rope orange peel grapple, polyp grapple, mechanical orange peel grapple, shell grapple, ship unloading grapple, scrap grapple, garbage grapple, rope grapple, digging grapple -Manufacturer: LAUDI GVE -Type: Four-rope orange peel grapple type 6.3 m³ -Condition: unused -Accessories: 3 replacement arms for the gripper, see pictures -Max. payload: 5600 kg -Height of the closed gripper: 3400 mm -Height of the open gripper: 3900 mm -Width of closed gripper: 3380 mm -Opening width: 4660 mm -Rope length in closed gripper: 8600 mm -Rope length in the open gripper: 17250 mm -Transport dimensions disassembled: 2460/5020/H2500 mm -Weight: 5500 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from electric high lift truck Linde L 12 -Hydraulic pump: Type A5088869 -Motor: 24 V 2.2 kW -Hydraulic tank -Dimensions: 305/157/H540 mm -Weight: 11.6 kg

Light barrier, frame light barrier, inductive sensor, electronic sensor, proximity switch, fork light barrier -Manufacturer: Balluff, fork light barrier -Type: BGL001J BGL 50A-001-S49 -Voltage: 10...30 V DC -Number: 2 sensors available Price: per piece -Dimensions: 90/70/H10 mm -Weight: 0.1 kg/pc.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Röhm, Top jaw set, rotary jaw set, 4-piece, for chuck size Ø160 mm, 2 sets -Jaw width: 18 mm -Dimensions: see photo technical drawing -Price/Fee: complete -Overall dimensions: 160/70/H50 mm -Total weight: 1.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set, drill jaw -Manufacturer: Röhm, drill jaw BB, size 200, 4-jaw set, 2 sets -Type: 110068 -Jaw width: 20 mm -Dimensions: see photo technical drawing -Price/Sale: only complete set -Overall dimensions: 160/70/H53 mm -Total weight: 2.8 kg

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, clear view mast -Manufacturer: Linde, forklift mast, unobstructed view mast from front forklift type H30T -Load capacity: 3000 kg -Lifting height: approx. 3500 mm -Dimensions: see photos / technical drawing -Transport dimensions: 2500/1150/H330 mm -Weight: 725 kg

CONTROLS   PLC SIEMENS SIMATIC PRESS DESIGN   table cushion: yes PRESS FORCES   total force (nominal): 630 to PRESS TABLE   table surface (left-right): 2500 mm   table surface (front-back): 1300 mm DIE CUSHION (TABLE CUSHION)   cushion force: 250 to   stroke: 400 mm   cushion plate surface (left-right): 2450 mm   cushion plate surface (front-back): 1250 mm

Manufacturer: Weinig , Type: Unimat 3000 Brilliant, Year: 2002, Control: Weinig LogoCom, Planing widht mm: 20-230, Planing hight mm: 10-160, Number of spindles: 9, Elektronische Achsverstellung: yes, Wellendrehzahl: 4000-12000 regelbar, Fast exchange device: HSK 63, Setting up program shafts: yes, Saw unit kW: no, Table rollers: yes, Tool exchange places: no, Elektronische Anzeige : yes, Rotations of spindles max. rpm: 12000, Spindle arrangement: unten/rechts/links/rechts/oben/unten/oben/unten, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 7,5, Feeding speed min-max m/min: 10-36, Feeding speed continous adjustable: yes, Table length: kurz, Pneumatical top pressure: yes, Adjustment - electonically: yes, Jointer Stück: yes, 1.Bottom spindle kW: 7,5 KW/12000 U/min, 2nd spindle on right kW: 7,5/12000 U/min, 3.Left spindle kW: 11/<CRLF>4000-12000mi ...

Manufacturer: Weinig , Type: Unimat 30 EL, Year: 1999, Control: Siemens, Planing widht mm: 300, Planing hight mm: 120, Number of spindles: 6, Elektronische Achsverstellung: no, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 120, Saw unit kW: no, Table rollers: no, Rotations of spindles max. rpm: 6000, Spindle arrangement: U/R/L/R/O/U, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 5,5, Feeding speed min-max m/min: 5-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, Jointer Stück: no, 1.Bottom spindle kW: 7,5, 2nd spindle on right kW: 5,5, 3.Left spindle kW: 5,5, 4th spindle on right kW: 5,5, 5.Top spindle kW: 7,5, 5th spindle at bottom kW: 7,5, Noise enclosure: Kabine, FREE TEXT: inkl.3 Hebebühnen und und eine Apstapelanlage/, Year :1999

Manufacturer: Weinig, Type: Uniplan 23, Year: 1998, Control: hand, Planing widht mm: 220, Planing hight mm: 120, Number of spindles: 2, Spindle arrangement: Oben/unten, Min.-max. workpiece length in mm: 300, Shaft speed: 7200, Hydro-clamping: yes, Spindles: 2, Spindle diameter in mm: 50, Rotations of spindles max. rpm: 7200, Spindle arrangement: Oben/unten, Separate engine per spindle: yes, Main engine kW: 5,5, Fully suspended drive feeding: yes, Feeding - kW: 3, Feeding speed min-max m/min: 6-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, 1.Bottom spindle kW: 5,5, 4.Top spindle kW: 5,5, Year :1998

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1600 mm -Cross-section: 100 x 40 mm -Reception: 400 mm (see sketch in the photos) -Transport dimensions: 1750/590/H110 mm -Weight: 118 kg

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated - NEW GENERATION Capacity: 115 liters Temperature range: -10°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 700 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 125 kg Year of manufacture: 2021 Tested at 37°C and -10°C

Neerwaartse persbeweging met zijdelingse belasting - maximale openingsafstand: 400 mm - slag: 400 mm - Tafelafmetingen: 3500 x 3000 mm - De bovenste tafel kan verwarmd worden - De onderste tafel is niet verwarmd - 12 zuigers (diameter 90 mm)

Height=1.86 m, Overall length= 1.9 m, Overall width= 2.3 m, Net weight= 850 kg,

Net weight: 750 kg, max. load capacity: 5800 kg, max. loading height: 3210 mm, version: wheeled storage frame with stair landing

Height=1.23 m, Overall length= 2.27 m, Overall width= 1.03 m, Net weight= 143 kg,

We offer a refurbished Dokadek - 412.83m² with 65% discount - partially refurbished Doka rental warehouse quality The frames are cleaned, corrosion sealed and coated with zinc phosphate All elements are covered with original Doka Xlife formlining and partly newly covered New value approx. 274,093.90€ Special net price: 95.932,87€ pcs. Description 17 Dokadek element 1.22 x 2.44m 164 Dokadek element 0.81 x 2.44m 23 Dokadek element 1.22 x 1.22m 4 Dokadek element 0.81 x 1.22m 250 Dokadek support head 42 Dokadek 2.44m 21mm 2 Dokadek balancing beams 1.22m 21mm 46 Dokadek Differential Carrier 0.81m 21mm 149 Dokadek suspension bracket H20 30 Dokadek Wall Brackets 100 Dokadek Wall Head 10 Dokadek Corner Head 2 Dokadek mounting rod B 28 Dokadek panel pallet 0.81 x 2.44m 5 Dokadek panel pallet 1.22 x 2.44m 7 Doka reusable containers 1.20x0.80m 2 Dokadek range of c ...

Forklift gooseneck, gooseneck for roll pallets, heavy-duty roll pallets, platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: Plan, forklift gooseneck -Gooseneck: with automatic locking -Load capacity: 4 t -Transport dimensions: 1060/2580/H850 mm -Weight: 522 kg

Format 700 x 385 - 140 x 210 mm Speed : up to 6000 A4 sheets/h Up to 9 creases and 2 folds per document

Description Rarity for retrofitting and upgrading existing Stahlfolder folding machines or folding units 1st folding unit BUH 66-6 semi-automated from 2006 – upstream knife shafts with protective cover (conversion kit suitable for folding units) – motorized folding roller adjustment – six manually adjustable folding pockets 66cm infeed width – double downstream knife shafts with lift kit

TRUMPF laser optics or an optical/focusing module for a CO₂ industrial laser. In your photos you can see the TRUMPF lettering, the ZnSe designation on the label and two ports, which goes well with a cooled or rinsed optical unit. ZnSe stands for zinc selenide, a typical material for CO₂ laser lenses and windows. Comparable TRUMPF spare parts and accessory pages carry exactly such ZnSe lenses/protective windows for CO₂ laser optics.

A deposit of €150.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-16

Display gluer- Lunex, Uni-Gluer U-1600, Year 2003, Nordson Gluesystem with 3x Guns

LAMINA GLUELINE 3200 GL, • Year of construction: 2011, • Sheet format min.: 500 x 700 mm - 2x, • Sheet format max.: 1600 x 1600 mm - 2x, • Output: up to approx. 1000 pieces/h, • Material types: F, E, B, C, CB, EB and EE shaft, 1-piece and 2-piece base, • Glue type: Hot-Melt (2 hot-melt valves), • Application type: Caterpillar, • Stacking height including pallet: all heights possible (delivery instructions)

Bahmüller Turbox BJD 2100, Max. Size: 2100x1200 mm, Min. Size: 380x160 mm, Longitudinal seam bonding, Automatic floor, 4-6 point bonding, Solid board: 800-1500 g/m², Hebklwexni D Eevy Aefn, Corrugated: N,F,E,B,C,A,EE,EB,BC etc.

Caustic diving device Riehle LTG 780 Tauchboy Floor-standing unit made of stainless steel incl. driving table with shelf Lye drain tap at the bottom Used device cleaned with warranty

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 900 mm -Attention: please note the condition shown in the photos -Cross-section: 100 x 40 mm -Reception: 400 mm (see sketch in the photos) -Transport dimensions: 1020/565/H100 mm -Weight: 98 kg

Dimensions 1500 x 750 x 500 mm, fork hole size 130 x 52 mm, metal frame, never used Overall dimensions: 1500 x 750 x 500 mm Weight: 100 kg Auction-ID: A7-45834-267

The set includes 2 ramps Can be used open and folded Open load capacity: 250 kg per piece or 500 kg per pair Folded capacity: 1,100 kg per unit or 2,200 kg per pair Open length: 1830 mm Never used Overall dimensions: 1000 x 200 x 200 mm Weight: 10 kg Auction-ID: A7-45834-241

Universal seat, never used Overall dimensions: 500 x 500 x 400 mm Weight: 10 kg Auction-ID: A7-45834-134

Universal seat, never used Overall dimensions: 500 x 500 x 400 mm Weight: 10 kg Auction-ID: A7-45834-189

1500 mm Overall dimensions: 1500 x 300 x 300 mm Weight: 30 kg Auction-ID: A7-45834-147

Universal seat Overall dimensions: 500 x 500 x 400 mm Weight: 10 kg Auction-ID: A7-45834-57

Dimensions 1500 x 750 x 500 mm, fork hole size 130 x 52 mm, metal frame, never used Overall dimensions: 1500 x 750 x 500 mm Weight: 100 kg Auction-ID: A7-45834-38

1500 mm Overall dimensions: 1500 x 300 x 300 mm Weight: 30 kg Auction-ID: A7-45834-278

Universal seat Overall dimensions: 500 x 500 x 400 mm Weight: 10 kg Auction-ID: A7-45834-254

CAPASITY 11 KJ 400 KG

Manufacturer: Curioni Model: CM 1350/3400 P Year of Manufacture: 2010 Type: Inline Working Width: 3300 mm Max Speed: 15,000 C/H Weight: 6,000 kg Capabilities - Print: Yes - Creasing/Scoring: Yes - Slotting: Yes - Gluing: Yes - Taping: Yes - Bundling : Yes Included Equipment - 1 Print Unit - Rotary Die-Cutter - Jettack Taper - Sodeme Stitcher - Emmepi Bundler Find more here - / Contact us at -

Battery worn out; mast needs to be overhauled; without charger Auction-ID: A1-43429-214

Format range: Box length: 80-535 mm, Box width: 50-500 mm, Equipment: standard, right/left curve, Packing scheme: 1-5 rows next to each other, 1-5 layers on top of each other, on creasing line 2 or 4 as well as on closure caps, Output more than 200,000 boxes per hour. Cleaned / checked / new wear parts.

Industrial control terminals with closed housing for fixed wall mounting. Suitable as an HMI display, machine control panel or visualization terminal in production and workshop environments. Front with glass cover, robust industrial housing. Technical data (resolution, interfaces, touch function) not known. Auction-ID: A7-46417-201

\" Casting ladle / stopper ladle 0.55 t – Foundry Service Manufacturer: Foundry Service GmbH Type: Plug ladle Capacity: approx. 0.55 t Equipment • mechanical tilting device with handwheel • Traverse for crane transport • Plug system for pouring Condition Machine from stock. Sale as shown. Capacity: 0.55 t Net weight: approx. 260 kg Gearbox type: SG173N \" Auction-ID: A7-46417-380

A four-column stamping press Exner with electronics overhauled in 2011 is available. Press force: 340t, pressure cylinder: 1, pressure cylinder diameter: 380mm, ram stroke: 180mm, stroke adjustment: 100mm, installation height: 400mm, ram diameter: 260mm, table dimensions X/Y: 910mm/610mm, machine dimensions X/Y/Z: approx. 1300mm/1600mm/2950mm, weight: approx. 6500kg. An on-site inspection is possible.

Format range: max. 680 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic top gluing unit HHS X-pect, 4 channel with 2 application heads, disc undergluer on the left, Bobst CUBE control, vibrator, cleaning brushes in the feeder, primary crusher on the right and left, kicker, counter, digital position indicators, folding floor module A2, pneumatic, intermittent press belt. Overhaul in 2026: cleaned, checked, painted, new press belts as well as feeder and transport belts.

\" WINI Desk / Work Table \"Form 2000\" – 160 x 80 cm – with permanently installed undermount cabinet Equipment: • Sturdy steel frame • Permanently mounted undermount cabinet with several drawers Condition: Used, with signs of wear and tear due to age and use (slight scratches, discoloration). Scope of delivery: • Desk incl. permanently installed undermount cabinet • Sale without pictured contents / tools / decoration • Dimensions: approx. 160 x 80 x 72.5 cm • Manufacturer: WINI Office Furniture • Model: Form 2000 • Colour: light grey table top, grey frame, beige undermount cabinet \" Auction-ID: A7-46417-306

Tilting container ENITOR type K500 Used tipping container made of galvanized steel, suitable for chips, scrap and other bulk materials. Type: K500 Load capacity: 800 kg Content: 500 l Year of construction: 2017 Weight: 150 kg The container is rollable (4 wheels), has a tilting device and is fully functional. Optical traces of use due to previous industrial use present. Dimensions: approx. 110 × 110 × 104 cm (L×W×H). Auction-ID: A7-46417-2