gear hobbing used for sale

adjustable gear motor, variable speed gear motor, electric motor -Engine power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Shaft diameter: Ø 14 mm -Design: B5 -Number: 2 motors available -Price: per piece -Dimensions: 410/187/H200 mm -Weight: 20 kg

Gear motor variable / adjustable BRUMO GRG1U100B 0.37 kW 29 - 159 rpm 220 / 380 V shaft diameter: Ø 20 mm used, tested ! Dimensions: 500 x 370 x 210 mm

max. wheel diameter: 330 mm gear width: 180 mm max. module: 7 min. module: 0,5 total power requirement: 12 kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 215 mm gear width: 40,65 mm max. module: total power requirement: 20 kW weight of the machine ca.: 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. Extensive coolant equipment with filter system, band filter, etc. Driv ...

Gear Motor SEW SA42LP71 D63L4B03/HR/TF ( SA42LP71D63L4B03/HR/TF ) 0,0,0 25 kW 34 rpm i=37,94 220/ 380 V IP54 B35, with foot and flange shaft diameter: Ø 30 mm New !' Dimensions: 510 x 180 x 180 mm

workpiece diameter: 240 mm centre distance: 0 mm honing length max.: 500 mm max. module: 5 total power requirement: 12 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor -Speed: 15 rpm -Power: 0.18 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 33 -Dimensions: 450/200/H200 mm -Weight: 23 kg

Gear motor, electric motor -Speed: 79 rpm -Power: 0.18 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 415/250/H250 mm -Weight: 26 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.55 kW -Speed range: 64-218 rpm -Motor: adjustable -Drive shaft: Ø 19 mm -Construction: B3/B14 -Number: 1 piece of motors available -Price: per piece -Dimensions: 570/180/H270 mm -Weight: 20 kg

Gear Motor with Brake ABM Type: ZFB 12SO / G80 F4D 808-4 ( ZFB12SO / G80F4D808-4 ) 0,0,0,0 75 kW 430 rpm 230 / 400 volts 5 -100 Hz IP 54 / 55 flange Ø 140 mm used, tested ! Dimensions: 470 x 150 x 200 mm

Gear motor electric motor -Speed: 137 rpm -Power: 0.25 kW -Coupling: 24 V -Construction: hollow shaft angle B5 -Diameter hollow shaft: Ø 22 mm -Protection class: IP 54 -Dimensions: 440/160/H180 mm -Weight: 14 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Shaft: Ø 14 mm -Design: B5 -Number: 4 motors available -Price: per piece -Dimensions: 460/200/H200 mm -Weight: 22 kg

Gear motor, electric motor, three-phase motor -Speed: 80 rpm -Power: 11 kW -Construction: B5 -Shaft diameter: Ø 75 mm -Protection class: IP 44 -Dimensions: 935/700/H520 mm -Weight: 178 kg

Gear motor, electric motor, electric gear motor -Speed: 0,5/2,3 rpm -Power: 0.55 kW -Construction: B14 angle -Diameter shaft: 42 mm -Protection class: IP44 -Brake: 24 V -Number: 1x engine available -Dimensions: 700/300/H280 mm -Weight: 78 kg

Geared Motor GETRIEBEBAU NORD Type: SK 01F-71 L/4 ( SK01F-71L/4 ) 0.37 kW 70 rpm 230 / 400 Volt IP 55 Flange Ø 210 mm used, tested ! Dimensions: 400 x 170 x 210 mm

max. wheel diameter: 265 mm gear width: 45 mm max. module: 4 min. module: 0,3 max. workpiece diameter: 300 mm stroke length max.: 0-50 mm stroke position adjustment: 25 mm distance work spindle /surface of the table: 170/245 mm spindle taper: innen MK 4 table-size: 180 mm table hole: 95/75 mm strokes per minute: 450 - 840 total power requirement: 10 kW weight of the machine ca.: 5200 kg dimensions of the machine ca.: m : : : : : : : Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 m ...

geared motor, electric motor -Speed: 107 rpm -Power: 0.37 kW -Design: B3 -Shaft diameter: Ø 19 mm -Brake -Protection class: IP 54 -Quantity: 1x motor available -Dimensions: 520/203/H185 mm -Weight: 18.55 kg

Gear motor, electric motor -Speed: 40 rpm -Power: 9 kW -Construction: B3 -Diameter shaft: Ø 80 mm -Protection class: IP 33 -Dimensions: 1000/385/550 mm -Weight: 260 kg

Geared motor GROSCHOPP Type: WK 1441 - 1 ( WK1441-1 ) DM 80-40 0,0,0,0 022 kW 24 rpm 230 / 400 V shaft diameter: Ø 12 mm flange diameter: Ø 110 mm aluminium housing used, tested ! Dimensions: 230 x 170 x 130 mm

Seven gearboxes are available. 1) Jahnel-Kestermann, Getriebewerke Bochum GmbH, type: 027.5-AW36/FG, power: 40kW. 2) Polysius GmbH, Neubeckum, year of manufacture: 1956, type: 027.5 / AW36, power: 33hp, speeds: 542/14.5. 3) Polysius GmbH, Neubeckum, year of manufacture: 1964, type: GR36, power: 35hp, speeds: 555/15. 4) TGW Thyssen Getriebe und Kupplungswerke GmbH, type: KS 1.5, year of manufacture: 1990, power: PN 5.7kW. 5) WGW Westdeutsche Getriebewerke GmbH, type: N 6.7, characteristic values: n/n1 14-50/12.5, KB 2.5. 6) WGW Westdeutsche Getriebewerke GmbH, power: 45hp, characteristic values: n/n1 315/15, KBU 1245ISO. 7) Polysius GmbH, Neubeckum, year of manufacture: 1953, type: 027.5 / AW36, power: 42/34 hp, speeds: 600/16, 135/13. On-site inspection is possible.

Chassis, electric motor, DC motor, traction motor, drive motor -Chassis: for forklifts -with: slewing ring -Wheel intake -Dwg. No:. 5.44.181 -1 piece Part No.: 01472 -1 piece Part No.: 01423 -Number: 2x landing gear available -Price: per piece -Dimensions: 290/290/H290 mm -Weight: 32 kg

Gear motor, electric motor, electric gear motor -Speed: 18 rpm -Power: 0.25 kW -Diameter shaft: Ø 25 mm -Construction: B3 angle -Protection class: IP 44 -Dimensions: 380/200/H210 mm -Weight: 14 kg

geared motor, electric motor -with integrated frequency converter 0.37 kW -Speed: 60 rpm -Power: 0.55 kW -Design: B3 angle -Shaft diameter: Ø 20 mm -Brake -Protection class: IP 54 -Dimensions: 380/160/H240 mm -Weight: 13.5 kg

Gear motor, electric motor, electric gear motor -Speed: 24.8 rpm -Power: 0.37 kW -Diameter hollow shaft: Ø 30 mm -Construction: hollow shaft -Protection class: IP 55 -Brake -Dimensions: 340/290/H210 mm -Weight: 21 kg

Gear motor variable SEW transmission: S42-VUO 17-81 rpm manually adjustable via V-belt motor: eDFT71D-4 0,0,0,0 37 KW 1370 rpm 220/ 380 V 3AC IP54 Shaft diameter: Ø 25 mm Motor base: 130 / 135 x 124 mm Hole spacing ( parallel to shaft ): 100 mm hole spacing ( transverse to shaft ): 80 mm hole diameter: Ø 10.5 mm New ! Dimensions: 430 x 220 x 360 mm

Geared motor, electric motor, three-phase motor -Power: 0.55 kW -Speed: 109 rpm -Shaft: Ø 25 mm -Design: B3 angle -Protection class: IP 55 -Quantity: 1x motor available -Dimensions: 490/230/H170 mm -Weight: 22.6 kg

Gear motor, electric motor, electric gear motor -Speed: 149 rpm -Power: 0.55 kW -Diameter hollow shaft: Ø 20 mm -Construction: B5 angle -Protection class: IP 55 -Dimensions: 365/220/H170 mm -Weight: 12.7 kg

Geared motor with brake VEM ZG5 BMRZA 100 L 4 ( ZG5BMRZA100L4 ) 4,4,000 0 kW 50 rpm 220 / 380 V IP44 shaft diameter: Ø 75 mm Flange diameter: Ø 400 mm New ! Dimensions: 920 x 400 x 440 mm

Gear motor, electric motor -Speed: 65 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 55 -Price: per piece -Number: 1x available -Dimensions: 470/195/H365 mm -Weight: 29 kg

Gear motor, electric motor, electric gear motor -Speed: 24 rpm -Power: 0.55 kW -Construction: hollow shaft -Diameter hollow shaft: 28 mm -Protection class: IP 54 -Dimensions: 425/160/H220 mm -Weight: 21 kg

Gear motor, electric motor, three-phase motor -Speed: 30 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 385/160/H255 mm -Weight: 12 kg

Gear motor, electric motor -Speed: 94 rpm -Power: 0.15 kW -Construction: B5 angle -Diameter hollow shaft: Ø 22 mm -Protection class: IP 54 -Brake -Number: 1x engine available -Price: per piece -Weight: 14.3 kg

Geared motor with brake VEM ZG4 BMRE 100 L 6 ( ZG4BMRE100L6 ) 2,2,2 2 kW 25 rpm 220 / 380 V IP44 shaft diameter: Ø 60 mm Flange diameter: Ø 300 mm New !' Dimensions: 780 x 300 x 360 mm

Gear motor, electric motor -Speed: 140 rpm -Power: 0.37 kW -Construction: B5 angle -Diameter shaft: Ø 22 mm -Protection class: IP 54 -Number: 1x geared motors available -Price: per piece -Weight: 11 kg

Servo Motor with Gearbox and Brake, Permanent Magnet Motor ELAU SB105-30-08-05-19-S-01-64-BOKN 19192308-012 3000rpm IP64 Gearbox: PFEFFER & PARTNER RPLN 15-2 BK i 45:1 shaft: Ø 32 mm flange: 105 x 105 mm used, tested ! Dimensions: 660 x 140 x 110 mm -

MAX DIAM 250 X 2000

Gear motor, electric motor, three-phase motor -Manufacturer gearbox SITI type: MVF49/F -Manufacturer motor SME type: FC71B -Speed: 97 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: 25 mm -Protection class: IP 44 -Dimensions: 350/190/H175 mm -Weight: 9.4 kg

Gear motor, electric motor, three-phase motor -Manufacturer gearbox SITI type: MI50A -Manufacturer motor SME type: FC71B -Speed: 45 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: 24 mm -Protection class: IP 44 -Dimensions: 360/160/H230 mm -Weight: 10 kg

Gear Motor LEROY SOMER CBA3 BS ( CBA3BS ) 0,0,0 16 kW 50 rpm i=29,30 ATAV F71 BSTA4, explosion-proof 220/ 380 V IP54 design: flange shaft diameter: Ø 20 mm Dimensions: 500 x 160 x 160 mm

Stock number: PT1067, Gear pump, stainless acid proof steel,, ECO type GM4-KCT-KKS., 0,25 kW motor, 910 rpm.,, 220/380 volt., Ø 1/2 connections,, theoretical capacity 400 l/h., Material: Stainless acid proof steel AISI 316

Gear motor, electric motor, three-phase motor -Gearbox manufacturer Bonfiglioli type: MVF44/F -Manufacturer motor SME type: FC63B -Speed: 100 rpm -Power: 0.18 kW -Construction: B14 angle -Diameter hollow shaft: 18 mm -Protection class: IP 44 -Dimensions: 310/140/H185 mm -Weight: 6.65 kg

Gear motor, electric motor, three-phase motor -Speed: 40 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: Ø 22 mm 1x with short shaft -Protection class: IP 54 -Price: per piece -Number: 2x available -Dimensions: 350/160/H200 mm -Weight: 12.2 kg

Gear motor variable / adjustable SEW S60- D22 B ( S60-D22B ) 0,0,0,0 75 kW / 0.48 kW (1440 / 940 rpm) 15 - 115 rpm manually adjustable 380 V IP55 shaft diameter: Ø 35 mm New ! Dimensions: 710 x 350 x 280 mm

Gear motor, electric motor, electric gear motor -Speed: 105 rpm -Power: 1.5 kW -Construction: B5 -Diameter shaft: 32 mm -Protection class: IP 44 -Number: 3x engines available -Price: per piece -Dimensions: 520/200/H225 mm -Weight: 32 kg

Gear motor, electric motor -Speed: 54 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Dimensions: 395/185/H185 mm -Weight: 16.5 kg

Gear motor, electric motor, electric gear motor -Motor power: 0.25 kW -Speed: 26.5 rpm -Design: B3 angle -Drive shaft hollow shaft: Ø 24 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 200/190/H400 mm -Weight: 10 kg

Gear motor, electric motor, electric gear motor -Motor power: 0.25 kW -Speed range: 3.25 rpm -Construction: B3 angle -Drive shaft: gear -Number: 1 piece motors available -Dimensions: 450/200/H360 mm -Weight: 40kg

Stepper gear motor with brake, universal rotary tables with cam drive SOPAP TSa 11000-8-360-200-D ( TSa11000-8-360-200-D ) 103.3 HZ 310 V IP54 used, tested ! Dimensions: 1500 x 1000 x 530 mm

Milling axes, dividers, grinding wheels, High: 1765 mm, Tall: 1765 mm, Weight: 2500 Kg, Width: 1100 mm, Long: 2570 mm, Ø tool: 250 mm, Total power: 7.5 kva., Ø of the grinding wheel: 250 mm, Travel of table: 400 mm, Height of points: 125 mm, Height of centers: 125 mm, Max. Ø to be sharpened: 250 mm, Power wheel motor: 3 Kv., Manufacturing number: 1905.04, Ø max to sharpen: 250 mm, Grinding wheel motor power: 3 Kv., Distance between points: 635 mm, Table tour: 400 mm, Revolutions of the wheel: 1750/2150/2850 mm, Length between points: 635 mm, Maximum length to sharpen: 400 mm, Revolutions of the grinding wheel: 1750 / 2150 / 2850 mm, Radial travel axis wheelhead: +35 / -65 mm, Maximum length to be sharpened: 400 mm, Vertical travel of the wheel: 175 mm, Vertical travel of the grinding wheel: 175 mm, Radial travel of the grinding wheel shaft: +35 / -65 mm, Cone holder shaft clamping pi ...