134,051 used machines on RESALE, but how to find them? Machine Search
Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from electric high lift truck Linde L 12 -Hydraulic pump: Type A5088869 -Motor: 24 V 2.2 kW -Hydraulic tank -Dimensions: 305/157/H540 mm -Weight: 11.6 kg
Light barrier, frame light barrier, inductive sensor, electronic sensor, proximity switch, fork light barrier -Manufacturer: Balluff, fork light barrier -Type: BGL001J BGL 50A-001-S49 -Voltage: 10...30 V DC -Number: 2 sensors available Price: per piece -Dimensions: 90/70/H10 mm -Weight: 0.1 kg/pc.
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Röhm, Top jaw set, rotary jaw set, 4-piece, for chuck size Ø160 mm, 2 sets -Jaw width: 18 mm -Dimensions: see photo technical drawing -Price/Fee: complete -Overall dimensions: 160/70/H50 mm -Total weight: 1.9 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set, drill jaw -Manufacturer: Röhm, drill jaw BB, size 200, 4-jaw set, 2 sets -Type: 110068 -Jaw width: 20 mm -Dimensions: see photo technical drawing -Price/Sale: only complete set -Overall dimensions: 160/70/H53 mm -Total weight: 2.8 kg
Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, clear view mast -Manufacturer: Linde, forklift mast, unobstructed view mast from front forklift type H30T -Load capacity: 3000 kg -Lifting height: approx. 3500 mm -Dimensions: see photos / technical drawing -Transport dimensions: 2500/1150/H330 mm -Weight: 725 kg
Manufacturer: Weinig , Type: Unimat 3000 Brilliant, Year: 2002, Control: Weinig LogoCom, Planing widht mm: 20-230, Planing hight mm: 10-160, Number of spindles: 9, Elektronische Achsverstellung: yes, Wellendrehzahl: 4000-12000 regelbar, Fast exchange device: HSK 63, Setting up program shafts: yes, Saw unit kW: no, Table rollers: yes, Tool exchange places: no, Elektronische Anzeige : yes, Rotations of spindles max. rpm: 12000, Spindle arrangement: unten/rechts/links/rechts/oben/unten/oben/unten, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 7,5, Feeding speed min-max m/min: 10-36, Feeding speed continous adjustable: yes, Table length: kurz, Pneumatical top pressure: yes, Adjustment - electonically: yes, Jointer Stück: yes, 1.Bottom spindle kW: 7,5 KW/12000 U/min, 2nd spindle on right kW: 7,5/12000 U/min, 3.Left spindle kW: 11/<CRLF>4000-12000mi ...
CONTROLS PLC SIEMENS SIMATIC PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 630 to PRESS TABLE table surface (left-right): 2500 mm table surface (front-back): 1300 mm DIE CUSHION (TABLE CUSHION) cushion force: 250 to stroke: 400 mm cushion plate surface (left-right): 2450 mm cushion plate surface (front-back): 1250 mm
Manufacturer: Weinig , Type: Unimat 30 EL, Year: 1999, Control: Siemens, Planing widht mm: 300, Planing hight mm: 120, Number of spindles: 6, Elektronische Achsverstellung: no, Work piece width min-max mm: 300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 120, Saw unit kW: no, Table rollers: no, Rotations of spindles max. rpm: 6000, Spindle arrangement: U/R/L/R/O/U, Separate engine per spindle: yes, Fully suspended drive feeding: yes, Feeding - kW: 5,5, Feeding speed min-max m/min: 5-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, Jointer Stück: no, 1.Bottom spindle kW: 7,5, 2nd spindle on right kW: 5,5, 3.Left spindle kW: 5,5, 4th spindle on right kW: 5,5, 5.Top spindle kW: 7,5, 5th spindle at bottom kW: 7,5, Noise enclosure: Kabine, FREE TEXT: inkl.3 Hebebühnen und und eine Apstapelanlage/, Year :1999
Manufacturer: Weinig, Type: Uniplan 23, Year: 1998, Control: hand, Planing widht mm: 220, Planing hight mm: 120, Number of spindles: 2, Spindle arrangement: Oben/unten, Min.-max. workpiece length in mm: 300, Shaft speed: 7200, Hydro-clamping: yes, Spindles: 2, Spindle diameter in mm: 50, Rotations of spindles max. rpm: 7200, Spindle arrangement: Oben/unten, Separate engine per spindle: yes, Main engine kW: 5,5, Fully suspended drive feeding: yes, Feeding - kW: 3, Feeding speed min-max m/min: 6-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, 1.Bottom spindle kW: 5,5, 4.Top spindle kW: 5,5, Year :1998
WEINIG Quattromat Q23P, S/N 86825, YOC 1999 Machine with full fairing and integrated sound and dust protection. Technical data: Planing width: min. approx. 13 mm / max. 230 mm (with 125 mm flight circle) Planing height: min. approx. 6 mm / max. 120 mm (with 125 mm flight circle) Feed: 8 m/min., feed motor 1.5 KW Spindle sequence: 1. Spindle at the bottom, motor 5.5 KW 2nd spindle right (joint) / 3rd spindle left, motor 7.5 KW 4. Spindle top, motor 5.5 KW Spindle diameter D = 40 mm Accessories/Extras: Dressing table 2000 mm with joining ruler (adjustment range 10 mm) Folding device with joining seam cutter Manual Wax Pump Pneumatic pressure of the feed rollers Feed roller in front of dressing pneumatically timed Central position of the lubrication points at the front of the machine SICO Counters Set of planer heads WEINIG Centrolock 533 Operating instructions, ...
Size: 520 x 840 mm Equipments: flat pile feeder FI-52 with TREMAT Station I with 6 folding pockets 1.TI-52 Station II with 4 folding pockets 2.TI-52 Noise reduction hoods Mobile delivery SAK-56
Booklet machine Multi-functional machine construction to produce 16 page leaflets with a glued back with a size of 95x78 mm. The machine components are: Component 1 - Folding Machine - Manufacturer: MBO - Type: T530-I-53 - Year of Manufacture: 2011 - Integrated glue system - Year: 2013 - Machine equipped with silencing boxes - CE marked Component 2 - Cut and Punching Unit - Manufacturer: Bograma AG - Type: BS ECO 350/160/15 - Description: 2-phase cut and punching machine - Year of Manufacture: 2006 - CE marked - Technical documentation included Component 3 - Delivery and Compression Unit - Manufacturer: Herzog + Heymann, Bielefeld, Germany - Type: 271 - Year of Manufacture: 2011 - CE marked Find more here - / Contact us at -
Offer 26091 Technical data: - Max. working width 3200 mm - max. material thickness at 40 kp / mm² strength 2.5 mm - Bending angle adjustment electronically pre-selectable 0 - 180 ° - Operation via hand or foot switch - Largest opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 80 mm - the lower beam 90 mm - Upper bolster drive approx. 400 V / 1.8 kW - Bending beam drive approx. 400 V / 2.6 kW - Space requirement approx. W 4200 x H 1550 x D 2200 mm - Weight approx. 3800 kg
Key data: 1020 mm, 3 mm
Max. bending length: 1020 mm Max. sheet thickness: 3.5 mm steel Bending rail ground Weight: approx. 1000 kg
Key data: 5 , 300 mm, 125 mm
Four-sided planing or pre-planing machine Right machine, operation left The machine is especially suitable for planing and pre-planing slats. The floating vertical units in lightweight construction are optimally designed for the processing of curved goods. Short set-up times and fast dimension changes are made possible and guaranteed by the flexibility of the machine. The machine has 5 working spindles, with the following arrangement: [1] [2] [3] 1. Horizontal Down 2. Horizontal top 3. 4. Vertical left/right ( opposite ) 5. Scoring saw at the bottom TECHNICAL DATA Work dimensions Working width: 50 - 300 mm() Working thickness: 30 - 125 mm Working length: min. 1,800 mm Table height: 1,100 mm Feed speed: 50 - 250 m/min. Working thickness up to 160 mm possible with appropriate tools on the vertical spindles. Minimum planing width 50 mm possible with tool D≥250 ...
Pile feeder - Tremat head 4 buckles Anti-noise hood Batch counter Compressor Belt delivery
Fully automatic Rotary feeder 1st unit : 6 buckles RFH-82 2nd unit : 4 buckles BUH-82 3rd unit : 4 buckles BUH-66 SPH-70 belt delivery
\"Engine: LPG Load capacity: Nominal load capacity is 4500 kg. Drive: Hydrostatic, ensuring smooth direction changes and precision. New chain The forklift has new wheels, hydraulic hoses and a starter motor.\" Auction-ID: A7-40553-4
\"Load capacity: 1600 kg Center of gravity: 600 mm Power: 6.9 kW Own weight: approx. 892–986 kg Serial number: 91066485 Truck equipped with Traction battery – reconditioned 2024 Type: 4EPZS620 Voltage: 48V Capacity: 620 Ah Efficiency: 87% Weight: 915 kg Reconditioned date: 04/10/2024 Battery in very good condition, ready for intensive use.\" Auction-ID: A7-40553-5
Rotary feeder R530 6 buckles Gate folder MBO A56-DC-24 delivery
Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1600 mm -Cross-section: 100 x 40 mm -Reception: 400 mm (see sketch in the photos) -Transport dimensions: 1750/590/H110 mm -Weight: 118 kg
BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated - NEW GENERATION Capacity: 115 liters Temperature range: -10°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 700 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 125 kg Year of manufacture: 2021 Tested at 37°C and -10°C
sheet width: 1250 mm plate thickness: 1,5 mm distance between columns: 1300 mm daylight opening: 80 mm : 155 ° total power requirement: Handbetrieben weight of the machine ca.: 0,18 t dimensions of the machine ca.: 1,4 x 0,8 x 1,3 m Segment-bending machine Segment widths: 2x50mm,1x70mm,2x75mm, 2x100mm,4x150mm, 1x170m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Neerwaartse persbeweging met zijdelingse belasting - maximale openingsafstand: 400 mm - slag: 400 mm - Tafelafmetingen: 3500 x 3000 mm - De bovenste tafel kan verwarmd worden - De onderste tafel is niet verwarmd - 12 zuigers (diameter 90 mm)
Height=1.86 m, Overall length= 1.9 m, Overall width= 2.3 m, Net weight= 850 kg,
Height=1.36 m, Overall length= 1.71 m, Overall width= 1.02 m, Net weight= 757 kg,
Net weight: 750 kg, max. load capacity: 5800 kg, max. loading height: 3210 mm, version: wheeled storage frame with stair landing
Pile feeder F530 1st unit 4 buckles 2nd unit 4 buckles 3rd unit 4 buckles Batch counter A56-DC-24 delivery
Koppens Former Model: VM400HSE 400mm belt width Screw Fed system New Mitsubishi touch screen Excellent overall condition With one mould set included
Key data: 4 , 600 mm, 300 mm
FINAL PLANING LINE FOR STRAIGHT GLULAM PRODUCED BY LEDINEK => EUROPLAN 600-4V+4F S60 WITH INFEED AND OUTFEED MECHANIZATION Orientation: right machine This four-sided heavy-duty planer for timber was specially designed for planing of constructional timber and glulam beams. The machine is suitable for green as well as kiln dried timber. Machine is equipped with hydro cutterheads. The adjustment of cut off on the first cutterhead is motor driven. Set value is shown on operational panel. One’s desired thickness is set through an adjustable top unit with second cutterhead, the adjustment is motor driven with spindle lift mechanism in 6 columns with 120 mm diameter. The set thickness is shown on operational panel. The vertical units enable good clean surface or profiling. The machine has two opposite vertical floating heads (float up to 40 mm) so they can adjust to the curvature ...
MBO K 800.2 SKTL/6 AUT year 2007 pallet feeder 6 buckles 2 knives 1 side buckle Navigator control Compressor Palamides Delta 703 year 2006 good condition in production available immediately
Used Pablo cartoner type Pablobox 546. The device forms cartons, glues after manual loading of the product, closes the carton and glues. Year of construction 2020. CE
Used Fully Automatic Glass Jar Packaging System With Carton Forming Machine (Wrap Trays) In addition to packing products of the same type in cartons, it is also possible to automatically mix products sold offline. (Conveyor belt feeding for mixed cartons). The line includes: – Buhmann cartoning machine type C300, weight 1200 kg. – Buhmann packer type PF 800, weight 7500 kg. Performance: Online product launch – max. 280 jars/min Mixing Type A – 140 jars/min Mixing type B – 140 jars/min Total capacity (online,A,B) max.300 jars/min Cartoning machine for forming cartons and applying lids – 23.5 cartons/min Year of construction: 2016 Working hours: 5000h
Gr. working width: 4040 mm for sheet metal with a strength of 40 kg up to: 3 mm Upper bolster adjustment: 400 mm Underbeam adjustment approx.: 80 mm Max. bending angle adjustment electrically up to approx.: 180° Upper bolster variable speed drive: 4 kW Bending beam drive: 2 x 3 kW Back gauge, working range: 10 - 750 mm electr. Connection: 400 V Weight: 9 t Space requirement: 5570 x 2250 x 2000 mm high
Inv. Num. : 9062 Type: OHP 6 Producer: ZAKO Created: GO 2023 Parameters: Control system: FENIX Maximum sheet metal plate width: 6000 mm
Four-Way Planer Little Type Powermat 500 Technical data: - Planing width (mm): 230 - Planing height (mm): 140 - Waves: 6 1st Shaft: Down 2nd wave: right 3rd wave: left 4. Shaft: top 5. Shaft: top 6. Shaft: down - Spindle speed (rpm): 8000 - Total connected load (kW): 65 - Rated current (A): 142 - With planer heads Powerlock System - Program memory - Soundproofing hood - CE compliant
Height=1.23 m, Overall length= 2.27 m, Overall width= 1.03 m, Net weight= 143 kg,
We offer a refurbished Dokadek - 412.83m² with 65% discount - partially refurbished Doka rental warehouse quality The frames are cleaned, corrosion sealed and coated with zinc phosphate All elements are covered with original Doka Xlife formlining and partly newly covered New value approx. 274,093.90€ Special net price: 95.932,87€ pcs. Description 17 Dokadek element 1.22 x 2.44m 164 Dokadek element 0.81 x 2.44m 23 Dokadek element 1.22 x 1.22m 4 Dokadek element 0.81 x 1.22m 250 Dokadek support head 42 Dokadek 2.44m 21mm 2 Dokadek balancing beams 1.22m 21mm 46 Dokadek Differential Carrier 0.81m 21mm 149 Dokadek suspension bracket H20 30 Dokadek Wall Brackets 100 Dokadek Wall Head 10 Dokadek Corner Head 2 Dokadek mounting rod B 28 Dokadek panel pallet 0.81 x 2.44m 5 Dokadek panel pallet 1.22 x 2.44m 7 Doka reusable containers 1.20x0.80m 2 Dokadek range of c ...
Forklift gooseneck, gooseneck for roll pallets, heavy-duty roll pallets, platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: Plan, forklift gooseneck -Gooseneck: with automatic locking -Load capacity: 4 t -Transport dimensions: 1060/2580/H850 mm -Weight: 522 kg
Format 700 x 385 - 140 x 210 mm Speed : up to 6000 A4 sheets/h Up to 9 creases and 2 folds per document
Width 66 cm Year of manufacture 2007 Automatic Paper Folding Machine Computer control with touch screen Flat pile feeder FFH Automation Kit Feeder Double Suction Wheel 1st station: 6 fold pockets 66 cm Automation Kit II Automatic folding pocket adjustment Automatic folding roller adjustment Upstream knife shaft Downstream knife shaft 2nd station: 4 fold pockets 66 cm Automation Kit II Automatic folding pocket adjustment Automatic folding roller adjustment Upstream knife shaft Downstream knife shaft Palamides delta 703 Bundling Machine Delivery date: immediately
Description Rarity for retrofitting and upgrading existing Stahlfolder folding machines or folding units 1st folding unit BUH 66-6 semi-automated from 2006 – upstream knife shafts with protective cover (conversion kit suitable for folding units) – motorized folding roller adjustment – six manually adjustable folding pockets 66cm infeed width – double downstream knife shafts with lift kit
TRUMPF laser optics or an optical/focusing module for a CO₂ industrial laser. In your photos you can see the TRUMPF lettering, the ZnSe designation on the label and two ports, which goes well with a cooled or rinsed optical unit. ZnSe stands for zinc selenide, a typical material for CO₂ laser lenses and windows. Comparable TRUMPF spare parts and accessory pages carry exactly such ZnSe lenses/protective windows for CO₂ laser optics.
TRUMPF laser optics or an optical/focusing module for a CO₂ industrial laser. In your photos you can see the TRUMPF lettering, the ZnSe designation on the label and two ports, which goes well with a cooled or rinsed optical unit. ZnSe stands for zinc selenide, a typical material for CO₂ laser lenses and windows. Comparable TRUMPF spare parts and accessory pages carry exactly such ZnSe lenses/protective windows for CO₂ laser optics.
Wooden folding trestles 4 pcs. (2 pairs)
Folding ladder KRAUSE aluminium 5 steps
Forklift tine extension approx. 160x14b cm (1 pair)
Folding ladder GÜNZBURGER 41512, aluminium, 2.8 m 11 rubberised wide steps
maximum number of results exceeded
please refine your search
1.900 € 
