133,982 used machines on RESALE, but how to find them? Machine Search
Horizontal machining centre with 2-fold change table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 MFabr. No. 34 Year of construction 1988Travel range X: 500 mm, Y: 400 mm, Z: 320 mmClamping surface, table surface 500 x 400 mmTool holder ISO 40Spindle speed max. 6300 rpm. infinitely variableMain spindle drive 12 kWNet connection 380 Volt, 50 Hz, 30 kVA- Tool changer with 24 tool positions- Changing table with 2 stations- Interface for data transfer- Coolant device with chip conveyorSpace requirement L x W x
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/90/H56 mm -Total weight: 2.0 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotating jaw set, 4-piece -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/90/H57 mm -Total weight: 3.0 kg
Tipping containers, tipping containers for forklift trucksChip buckets - dump buckets - folding containersLoad capacity: approx. 1000 kgVolume: 1 m³Entry bracket: 230 x 110 mmTine spacing inside: 160 mmTine spacing outside: max. 600 mm- Entry pockets for forks - Entry bracket for transport and emptying by forklift or pedestrian stacker- Manual tilting device via hand lever- 4 pieces of plastic fixed castors 175 and, 2 pieces of steerable- foldable trailing drawbarWeight: 220 kgLength: 1700 mmWidth: 1060 mmHeight: 1500 mmvery
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotating jaw set, 4-piece -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/73/H48 mm -Total weight: 1.4 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotating jaw set, 4-piece -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/105/H67 mm -Total weight: 5.3 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 30 mm -Dimensions: see photo technical drawing -Overall dimensions: 135/125/H75 mm -Total weight: 5.9 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/90/H57 mm -Total weight: 2.1 kg
Technical Specifications & Performance Data The Used Fossil Flour Filter Della Toffola NF 5 1996 is a pressure filtration unit designed for beverage clarification with diatomaceous earth (fossil flour). It is well suited for pre-bottling and canning stages in beverage production and industrial packaging lines, supporting high product clarity before rinsing, filling, capping, and labeling operations. Manufacturer: Della Toffola Model: NF 5 Year of construction: 1996 (maintenance performed in 2012) Filtration stages: 3-stage configuration for coarse-to-fine clarification Operating context: Suitable for isobaric process environments and prefiltration ahead of carbonated product filling Electrical supply: 400 V, 50 Hz Full load current: 15 A Safety features: integrated protections and interlocks included Documentation: manuals available Typical applications: filtration of water, juice, beer, ...
Electrohydraulic Scissor Fork StackerScissor Pallet Truck, Pallet Pallet TruckTOYOTA / BT Type HTH 10 EFabr. No. 481795 year of manufacture 2005Lifting capacity 1000 kgLifting height max. 800 mmOverall height drained 85 mmFork length 1190 mm- Electric stroke via 12 volts Battery operated- Manual stroke via hand lever as on the pallet truck- TOYOTA Industrial Equipment Europe SARL (Made in France)- Long-stroke hydraulic cylinder- with single roller- Integrated charger (mains voltage 230 Volts, with IEC plug)Net weight 140
Electronic crane scale MWT type 142Fabr. No.: 142571 year of construction 1993Tensile force meter, crane scaleMeasuring range: 2,500 to 80,000 kgSmallest measured value: 20 kgPower supply via 12 volts Cordless suspension shackle for double hooks, anchor hook operation, storage of the measured values and tare via remote control- Memory for measured values (weights)- Printer for measured valuesVery solid and high-quality body made of steelWeight: approx. 200 kg; used
Folding machine FASTI type 2095-25-2,5Fabr. No. 94 295 004 Year of construction 1994Useful length 2540 mmmax. Sheet thickness 2.5 mmStroke of the upper beam 380 mmMotor power bending beam 2.2 kWWetz connection 400 Volt, 50 Hz- NC control FASTImatic FM100- one-piece pointed rail 135- controlled back gauge- continuous stop rail- controlled bending angle via control- electric foot switchesWeight 3000 kggood condition; used
Auction-ID: A1-40252-176
Electric walking forklift, ride-on pedestrian stacker STILL type EGV 14Fabr. No. 330221900092 year of construction 2009Nominal load capacity 1400 kgLifting height 5475 mmFork length 1160 mmTotal length 1930 mmTotal width 860 mmOverall height 2330 mmOperating voltage 24 volt- Triplex mast with 1830 mm Free lift- 689.3 operating hours read- Battery from year of construction 08/2008, type 3 PZS 315 (24Volt / 315Ah)- Automatic charger- New TÜV test UVV (surcharge 150,-- EUR net)Weight 1440 kgGood condition, battery bad. Surcharge
Viewing by appointment! Auction-ID: A1-40252-108
Length 2100mm, entrance size approx. 220x70mm. Auction-ID: A1-46553-39
Electric Forklift JUNGHEINRICH Type EFG-V20 MFGE115-450 DZFabr. No. 89.90.74.09 Year of construction approx. 2000Nominal load capacity 1900 kgLifting height 4500 mmFork length 1130 mmFork carriage width 980 mmOverall height 2000 mmOperating voltage 48 volt- triplex mast with full free lift 1400 mm- hydraulic sideshift battery from year of construction 2006 Type 6 EPZS 750 (48 Volt/ 750 Ah) - battery in poor condition- 4-wheel solid rubber - tires, front 200/50-10, rear rear 16x6-8- Hydr. Auxiliary steering- automatic charger Jungheinrich,
Viewing by appointment Auction-ID: A1-40252-156
Key data: 4 , 180 mm, 110 mm
SPECIFICATIONS: Length of the planer: 2300 mm Working width: 180 mm Working height: 110 mm Spindles: Ø 35 mm Number of spindles: 4 Chain drive (1.70 kW) Speed: 6000 rpm Installed power: 16.5 kW Voltage: 380 V SHAFT CONFIGURATION: I bottom (5.5 kW) II right (5.5 kW) III left (5.5 kW) IV top (5.5 kW) EQUIPMENT: 01 Unloader 01 Return Conveyor
Key data: 4 , 180 mm, 120 mm
SPECIFICATIONS: Length of the planer: 1700 mm Working width: 180 mm Planing height: 120 mm Spindles: Ø 35 mm Number of spindles: 4 Chain drive (1.70 kW) Speed: 6000 rpm Installed power: 16.5 kW Voltage: 380 V CONFIGURATION OF THE SPINDLES: I bottom (5.5 kW) II right (5.5 kW) III left (5.5 kW) IV top (5.5 kW)
Doka Foot Spindle Lower spindle (height adjustable) for shoring towers. 9.00 kg EUR 35,70 per piece Doka Screw jack foot Bottom spindle (height adjustable) for load-bearing towers. 9.00 kg EUR 35,70 per piece
Four-way head spindle, galvanized Four-way head spindle for height-adjustable and tilt-proof connection of shoring and superstructure with one or two H20 formwork girders. 10.4 kg EUR 38,70 per piece 4-way screw-jack head 4 way screw-jack head for height-adjustable, anti-tip connection between load-bearing tower and superstructure with one or two H20 beams. 10.4 kg EUR 38,70 per piece
4th function to carriage Auction-ID: A1-40252-19
Pile feeder 1st unit : 4 buckles TI-36/4-FI (year 2000) 2nd unit 4 buckles (year 2002) 3rd unit KBI-36 (year 2006) Belt delivery SA 30 Batch counter Pump
Pallet feeder 4 buckles Batch counter Anti-noise hood MBO Z2 knife Palamides Alpha 500 delivery (year 2005)
Auction-ID: A1-46553-15
A GUK slitter rewinder and buckle folding machine is available. Infeed paper width: 210mm, folding capacity: 320 sheets/min, min. forming range: 60mm/105mm, max. forming range: 210mm/340mm, cutting tolerance at 300 sheets/min: +/-1mm, max. roll diameter: 600mm, max. roll length: 4000mm. Documentation available. On-site inspection is possible.
Pile feeder – separating head 4 buckles Belt delivery Touchscreen panel Automatic setting
maximum number of results exceeded
please refine your search
2.500 € 
