gear hobbing fo used for sale

Packaging Machine, Rose Forgrove, FLOWPAK,

Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Smugglers/smugglers conveyor technology Model: Round belt Condition: Used Year of construction: 2013 Manufacturer: AMI Fördertechnik Total width outside: approx. 1790 mm Total width inside: approx. 2300 mm Conveying width incl. motor: approx. 800 mm Conveying width without motor: approx. 710 mm Roller spacing/ axle spacing: 120/65 mm Frame height: approx. 125 mm Frame width: approx. 35 mm Colour: Light grey Including SEW motor (037 KW) Includes side guide Feet to be ordered separately. In stock: 1 Price per piece The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made soluti ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Roller conveyor/ conveyor technology/ rollers Manufacturer: AMI Fördertechnik Year of construction: 2013 Condition: Used Drive type: Flat belt Total length: approx. 3800 mm Total width incl. motor: approx. 850 mm Total width without motor: approx. 690 mm Conveying width: approx. 600 mm Wheels/axle distance: approx. 65 mm Roll diameter: approx. 50 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 40 mm Including 2 SEW motors (0.37 KW) In stock: 2 pieces Price per meter The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics F ...

Key data: 510 mm, 2250 mm, 4 St.

Specifications/Equipment: - Planing width 510 mm - Chip removal max. 8 mm - Table length 2250 mm (dual folding system with spring support) - Swivel dressing fence with parallelogram guide - Dressing protection "Comfort" - 4-knife system planer shaft, 510 mm - Speed 4,600 rpm - Suction nozzle Ø 140 mm - Connection: 400 V, 50 Hz, 3~, 5.5 kW - Weight approx. 700 kg

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller Conveyor / Conveyor Conveyor / Rollers with Drive incl. acceleration motor / roller Model: Flat Belt Condition: Used Year of construction: 2013 Manufacturer: AMI Fördertechnik Total length: approx. 1860 mm Total width incl. motor: approx. 830 mm Total width without motor: approx. 695 mm Conveying width: approx. 600 mm Wheels/ axle spacing: approx. 65 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Including 2 SEW motors (0.37 KW) Feet to be ordered separately Stock: 6 pieces Price per piece The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high load ...

Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Brötchenlinie, bis 110 Gramm, groß, gepflegt. Ein Kaiserbrötchen, einen Kaiserstern, ein Baguette machen

number of stapling heads: 2 voltage: 220 V frequency: 50 Hz dimensions of press (L x W x H): 60 x 70 x 105 cm weight: ca. 100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of heads: 2 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 15 mm serial no.: 230 spindle distance: 45 - 120 mm bore depth: 50 mm Hole distance: 3/380 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of stapling heads: 2 Dimensions (L/W/H): 40/40/80 mm : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Form 7 473 Band saw Cutting height max. 90° 270mm Cutting width max. without stop 465mm Saw blade length 3455mm Motor: 1.6KW 400/230V Suction nozzle 2x 100mm Weight: 160kg Exhibition Machine:

SPECIFICATIONS: Table dimension mm: 1600 x 500 Number of spindles: 21 + 3 (accessory head) Wheelbase between each spindle mm: 32 Max. drilling depth mm: 90 2 workpiece clamps Installed capacity: Hp 2.5 Pneumatic tilting device of the unit from above to the horizontal

We sell used car parts such as engines, gearboxes, drive shafts, body parts from all common car brands

Offer 23148 Specifications: - With hydraulic clamping and feeding device - Cutting area approx. 320 mm - Square 300 x 300 mm - Large section length for single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Band saw dimensions 3660 x 25 x 0.9 mm - Cutting speed infinitely variable 20 - 100 rpm - Feed speed hydraulically infinitely variable - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

Hand chuck three-jaw chuck FORKARDT, Type:315 Supplied with / without clamping flange Flange for milling or drilling table (option 150,00€) Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm Included in delivery: short, modified FORKARDT base jaws FGB-315 with reversible top jaws. The mounting flange can be fixed on the milling or drilling table. Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Countertop jaws with clear signs of wear. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€

Control: FOBA Max.travel range: X mm Y mm Z mm Wave length: um Average power: 150Watt Max. peak pulse power: 200 kW Laser crystal:Nd:YAG machine has cooling equipment, Made in Germany

Bread roll and bread roll line Fortuna + Kövy with Fortuna head machine KM 6 with settling belt Built in 1999 Maximum hourly output 8400 pieces Weight range: 40-80gr In need of an overhaul

REF-2305-2306-2307 PEACH STONING AND HALVING MACHINE FOODTECH 320 APA Stoning and halving machine for peaches. Manufacturer: CTI FoodTech Model: 320 APA Year: 2014 Automatic continuous orientation system. Stoning system with rotation of the blades driven by a high-revving motor. Automatic lubrication system. Output: up to 320 pieces/min (approx. 3,000 kg/h) Installed power: 3 kW/4 HP Infeed height: 1,200-1,070 mm Outfeed height: 490-590 mm Overall dimensions: length 5,238-5.763 mm; width 1,810 mm; height 1,930 mm Net weight: 2,100-2,300kg Water consumption (40 psi): 35 l/min

X, Y, Z Travel :600x400x400 mm Machine dimentions WxDxH : 1600x2700x2858 mm Machine weight :440 kg Workpiece dimentions WxDxH :1000x700x400 mm Max. electrode weight :100kg Max. Workpiece weight 1000 kg Can be inspected under power

Forberg 1000LH Twin shaft paddle mixer Serial: 1720 Stainless twin shaft paddle mixer, 1000Kgs, bottom discharge doors, inspection hatch on each side, 3Ph

Permanent magnet motor, permanent magnet motor, gear motor, electric motor, servo motor -Power: 22 Nm -Speeds: 300 rpm -Protection class: IP 54 -Voltage: 24 V -Diameter: Ø 15 mm -Price: per piece -Number: 7x available -defective foot: 1 -Dimensions: 380/110/H160 mm -Weight: 9.1 kg

As good as new reversible base jaws Insert: Three-jaw chuck with helical toothing, also power chucks. Manufacturer: Three-jaw chuck FORKARDT-F400; RÖHM-Duro-400→ (FOKARDT; ROHM; SCHUNK; KITAGAWA) Name of the base jaws: for example: MFG 400; SFG400 Three-jaw wedge rod chuck ø 400mm: Hand chuck F400; F500L DURO400; DURO 500 Rota-S 400; Rota-S500 THW500 F B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La= hole spacing; J=Za= tooth spacing; S= groove for top jaw or base jaw W = 45 mm H = 55 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set

Hacksaw Fortuna Mitre cuts Cable needs to be replaced. Length 1.20 m Height 1.00 m Width 0.60 m

Food Tools CP-1H half sheet product press Serial: 6341 2021, crumb pressing machine is designed to press and pack crumbs inot the bottom of a half sheet pan quickly and with consistent pressure, up to 360 products per hour, 280mm diameter press

-Pizza oven 2 tiers -Manufacturer: Moretto Forni -Model: PD60.60 -400 volts -8.4 kW -Weight: 111 kg -currently 3 ovens with 2 shelves each available in the warehouse Year of construction: 2013, 2016 and 2018

P409 - used approx. 25 m³ / 25,000 litres HDPE tank, plastic tank, double-walled, flat bottom tank. technical details: capacity: approx. 25 m³ / 25,000 litres material: HDPE tank, plastic tank manufacturer: Formoplast specific weight: min. 1.55 kg/L dimensions: approx. Ø 3.49 m × H total 4.50 m test mark: PA-VI 321.103, DIBT and media list available, AHL/ASL listed Miscellaneous: Used HDPE tank in good condition, cleaned inside, uncleaned on the outside. Above-ground storage tank for outdoor use, standing on a flat floor, double-walled, lid on top of the roof, several inlets and outlets. Only the tank itself is being sold, without attachments such as pipes, fittings and accessories. This container can be used as a storage tank for many different media. Former tank for 40% ironIIIChloride, DIBT and media list available. Sulfuric acid tank, hydrochloric acid tank, bleach ...

Fortuna semi-automatic bread roll press size A4 Bakery condition Ball knob repaired with duct tape two press plates as good as new Knife in very good condition, as not used for sourdough absolutely neat and smooth running Video about test run and more pictures available

Ice machine Ital Form Stainless steel construction and specific materials approved for food contact Standard working conditions: - Inlet water temperature 15°C - Ambient air temperature 20°C Dimensions: 1380x740x1015mm Electric power: 6kW Voltage: 400V 50Hz Productivity: 1500kg/24h Ice temperature: -5°C / -7°C Ice flake thickness: 0.9/1.2 mm Weight: 381 kg

ECOLAB filler outdoor cleaning system, but can also be used as a satellite station. As good as new, ready for immediate use

Year: 2016 - technically efficient, ready to work - after full service - spindle 2.2 kW - axis movement range: X – 2675 mm, Y – 355 mm, Z – 224 mm - pneumatic rotary table A: -90° / 0° / +90° - 4 pneumatic clamps - magazine for 6 tools - automatic quick tool change system - cooling and lubrication installation - operator panel, Windows 7 with online access - protective cabin - weight 1400 kg, dimensions: 3600 x 1660 x 1900 mm

x-travel: 5000 mm y-travel: 2500 mm z-travel: 1500 mm Control: Typ Fidia C20/6H-SB total power requirement: 90 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 mm, 1 t

for one-sided loading and unloading, with large stop plate and brake Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Coil weight: 1000 kg Machine Number: 308 Colour: blue/yellow Machine weight approx.: 350 kg Dimensions: 800 x 1800 x 1400 mm Coil width: 1000 mm Clamping range: up to 510 mm Load capacity in kg :1000 kg

Two-chamber vacuum machine Ital Form Dimensions of the machine: 1845×868×1020mm Chamber dimensions: 880x755x170mm Sealing length: 820mm Number of heaters: 2 Electric power: 3kW Weight: 295kg

Automatic controlled guillotine cross knife Consistent high throughput Chamber length: 620 mm Chamber cross section: 120 x 120 mm

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: for lathe -Electrically operated -Max. Speed: 6900 rpm -Admission: M42 x 1.5 mm -Dimensions: 600/390/H355 mm -Weight: 64 kg

Key data: 800 mm, 1900 kg

A favourable price and quality are not a contradiction at Hanst Tec - after all, there is the FORMAXX Z series. Conventional die-sinking EDM systems designed in such a way that their price enables cost-effective hourly rates, while the technology fulfils all the quality criteria that are typical for Hanst Tec: - easy to operate - reliable Traverse paths: X - 500, Y - 400, Z - 350 mm maximum distance Table - working head: 275-625 mm Workpiece load: 1900 kg The machine is in good condition, and available immediately!

Sparc Cerberus Combination unit Fortress Metal detector head Usable aperture - 350mm x 120mm Conveyor - 300mm Weigh Table length - 520mm Right to left direction Ply belt 16amp single phase plug machine is fully tested and working with new belts, bins supplied and all fail safes working Lockable bin, bin full etc Supermarket Spec

Universal Machine Mixer Type 45 Bowl capacity approx. 45 litres with tilt function 180° Capacity approx. 10 to 180 litres/hour E-system NEW Connection 400V, 5.5 kW,16A-CEE plug Machine More blenders in stock!

FOOD-TECH/ E044/ 2016 Blanching machine for carrots etc. 20 tons/h used, sold as it is, where it is, price ex location used, sold as it is, where it is, price ex location

diameter: 315 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 0,1 m bore 75 mm KK 140 4 pcs. fastening screws 173 / M 6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.