gear hobbing fo used for sale

Falzmaschine - Folding Machine Heidelberg Stahlfolder KH 66/4-KL Baujahr / Year 2006 - Serial-No. FH.FNF-00513 Flachstapelanleger / Flat Pile Feeder >>Automatische Falztascheneinstellung / automatic Folding buckles adjust<< Format min. 140 x 180mm - max. 660 x 1040mm Falztyp / Folding Type: 6 buckles - 2 knives Geschwindigkeit / Speed 50.000 Cycles/hour Auslage / Delivery Stacker SBP Manuals Included

Falzmaschine / Folding Machine  Stahl TF 78/6-4-4 16 Seiten Falzmaschine / 16 pages folding machine Baujahr / Year 1991 Rundstapelanleger / Round Pile Feeder Format min. 140 x 180mm - max. 780 x 1200mm Paper weight 40-250 g/m2 Falztyp / Folding Type: 6 buckles - 4 buckles - 4 buckles Auslage / Delivery SAL 66

Number of working hours: 2633 h weight max.: 8 t weight of the machine ca.: 13280 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Safety relay, safety control, overrun relay, flow monitor, contactor, relay, current monitor -Manufacturer: Schuko, overrun relay flow monitor -Type: RS 1 -Number: 1x relay available -Dimensions: 80/50/H110 mm -Weight: 0.3 kg

Safety relay, safety control, overrun relay, flow monitor, contactor, relay, current monitor -Manufacturer: Schuko, overrun relay flow monitor -Type: STW 1 -Number: 2 relays available -Price: per piece -Dimensions: 80/50/H110 mm -Weight: 0.2 kg/pc.

Safety relay, safety control, overrun relay, flow monitor, contactor, relay, current monitor -Manufacturer: Schuko, overrun relay, flow monitor, current monitor -Type: S 225637 -Quantity: 1x relay available -Price: per piece -Dimensions: 115/75/H25 mm -Weight: 0.1 kg

Size: 440 x 310 mm Equipments: Feeder Feeder Mode: Flat pile feeder Max. pile height: 740 mm Folding Units 1st unit Type: AFC-566 FKT Pockets: 6 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Working width max: 558 mm Fold length max: 850 mm Cross fold unit with 1x knife Noise Protection Hood Touch Screen Control Delivery Delivery mode: PST-40 Type: Press delivery Year: 2010 Serial number: 360003 Working width max: 440 mm Technical Details Sheet size max: 440 x 310 mm Sheet size min: 60 x 64 mm Infeed height min: 280 mm Mechanical speed max: 240 m/min Pressing force: 20,000 N Built-in controller Technical details: Sheet size max: 558 x 850 mm Sheet size min: 128 x 148 mm Max. mechanical speed: 240 m/min Max. mechanical speed (cycles): 30,000 cycles/h

A Hyster forklift is offered. Lift height: 5250mm, track width: 1130mm, load capacity: 4000kg, fork length: 1250mm, fork carriage/attachment width: approx. 1220mm, engine power: 65kW. Dimensions: X/Y/Z: 4150mm/1380mm/2440mm, weight: approx. 5880kg. An on-site inspection is possible.

Foot switch, safety foot switch, foot pedal -Foot switch: Safety foot switch -Metal housing: with protective cover, die-cast aluminum -Number: 2x foot pedals available -Price: per piece -Dimensions: 270/140/H145 mm -Weight: 1.4 kg

RODEA hydraulic folding clamp mod. S - CE standard - Year 2002

An R.A. TEX s.r.l. forming machine for the production of staples is available. Strip thickness range: 0.8mm-2mm, strip width range: 80mm-130mm, cutting capacity range: 26mm-140mm, production rate: 250/min, leg length range: 15mm-63mm. The machine can produce the following staple types: Duplex 76, Haubold 500, Super Duplex/KG700, SP90, N4450, Blue, Red, Red special size, G5562, G4450, BEA92, GSN18, GS16, GSW16 and SQ. Machine dimensions X/Y: approx. 6800mm/2500mm, weight: approx. 7600kg. Documentation available. An on-site inspection is possible.

Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece, cross clamping piece, cross clamp connector, cross clamp -Manufacturer: Ganter, Aluminum Foot Clamp -Type: GN 473 B12 -Number: 35x holders available -Price: per piece, minimum order 3 pieces -Dimensions: 38/35/H25 mm -Weight: 0.033 kg/pc.

A Bosch candy forming machine is offered. Max. rope speed: approx. 125m/min, min./max. output: approx. 1000/4000candies/min, hourly output range: approx. 400kg/h-1200kg/h, rope diameter range: approx. 15mm/49mm, max. filling percentage: approx. 32%, control system: Siemens SIMATIC S5-95U. Weight: approx. 2400kg. Machine dimensions X/Y/Z: approx. 3900mm/1650mm/1750mm. Documentation available. An on-site inspection is possible.

Control unit, control panel, operating panel, control unit, foot switch, safety foot switch, step switch -Manufacturer: Steute, single-pedal safety foot switch -Type: GFS 1SD1Övd -Item No.: 81.2.25.001 -Metal housing: with protective cover, die-cast aluminum -Dimensions: 300/160/H135 mm -Weight: 1.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece soft rotary jaw set -Jaw width: 20 mm -Dimensions: see photo technical drawing -Overall dimensions: 65/80/H55 mm -Total weight: 1.9 kg

weight max. in kg: 8 t Number of working hours: 2633 h height of stroke: 3750 mm weight of the machine ca.: 11600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/105/H67 mm -Total weight: 3.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 34 mm -Dimensions: see photo technical drawing -Overall dimensions: 180/135/H85 mm -Total weight: 10.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 125/105/H65 mm -Total weight: 4.1 kg

SEFA Pneumatic Large Format Press SLIDE-1285, Transfer Area 125 x 85 cm Bought at the beginning of 2021 - works perfectly - hardly used and in very good condition There is still a 5-year warranty on the heating element! Pneumatic Large Format Heat Press Pull-Out Worktop Extremely accurate temperature control +/- 1° thanks to multi-zone measurement technology Large touchscreen display 4 press programs can be stored, production counter - Transfer area 125 x 85 cm, for grouting of slabs up to a size of 120 x 80 cm - Digital time control 0 – 1,800 seconds - Digital temperature control 0-230°C - Contact pressure up to 386 g/cm² - Maximum material thickness 50 mm - Connection data: 12 KW, 400 VAC 3-phase, 20 A - Dimensions press: (WxHxD) 1286 x 794 x 2153 mm - Weight 419 kg The machine needs high-voltage current! Without guarantee and war ...

Forklift battery charger, industrial charger -Output: 36 volts -Power: 50 A -Connection: 220 volts -Dimensions: 560/350/H355 mm -Weight: 40 kg

Forklift crane arm STABAU type KR 15Fabr. No. 003-14276 Year of construction 1986Nominal load capacity 1500 kgLoad capacity at 450 mm Radius 1500 kgLoad capacity at 750 mm Radius 1100 kgLoad capacity at 1200 mm Radius 750 kgSuitable for fork carriage FEM 2 = 403 mmLoad hook adjustable in 6 stepsTotal height of the crane arm 1350 mmBoom profile 110 x 110 mmon mobile transport rackGood condition; used

Horizontal machining centre with 2-fold change table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 MFabr. No. 34 Year of construction 1988Travel range X: 500 mm, Y: 400 mm, Z: 320 mmClamping surface, table surface 500 x 400 mmTool holder ISO 40Spindle speed max. 6300 rpm. infinitely variableMain spindle drive 12 kWNet connection 380 Volt, 50 Hz, 30 kVA- Tool changer with 24 tool positions- Changing table with 2 stations- Interface for data transfer- Coolant device with chip conveyorSpace requirement L x W x

Foot switch, safety foot switch, foot pedal -Foot switch: Safety foot switch -Metal housing: with protective cover, die-cast aluminum -Quantity: 1x foot pedal available -Dimensions: 280/160/H130 mm -Weight: 1.4 kg

Tipping containers, tipping containers for forklift trucksChip buckets - dump buckets - folding containersLoad capacity: approx. 1000 kgVolume: 1 m³Entry bracket: 230 x 110 mmTine spacing inside: 160 mmTine spacing outside: max. 600 mm- Entry pockets for forks - Entry bracket for transport and emptying by forklift or pedestrian stacker- Manual tilting device via hand lever- 4 pieces of plastic fixed castors 175 and, 2 pieces of steerable- foldable trailing drawbarWeight: 220 kgLength: 1700 mmWidth: 1060 mmHeight: 1500 mmvery

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/70/H47 mm -Total weight: 0.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/75/H48 mm -Total weight: 1 kg

Electrohydraulic Scissor Fork StackerScissor Pallet Truck, Pallet Pallet TruckTOYOTA / BT Type HTH 10 EFabr. No. 481795 year of manufacture 2005Lifting capacity 1000 kgLifting height max. 800 mmOverall height drained 85 mmFork length 1190 mm- Electric stroke via 12 volts Battery operated- Manual stroke via hand lever as on the pallet truck- TOYOTA Industrial Equipment Europe SARL (Made in France)- Long-stroke hydraulic cylinder- with single roller- Integrated charger (mains voltage 230 Volts, with IEC plug)Net weight 140

ungheinrich EFX125 Narrow Aisle Forklift | 1,250 kg | 48V | 5 m lifting height | Duplex | Used For sale is a narrow-aisle forklift from the manufacturer Jungheinrich, model EFX125 SX120/500ZT-SF. The device comes from a site closure of a freight forwarder and has been regularly maintained. Technical data: • Manufacturer: Jungheinrich • Model: EFX125 SX120/500ZT-SF • Year of manufacture: approx. 2005 – 2012 (series produced during this period) • Operating voltage: 48 V • Battery: 660 Ah • Nominal load capacity: 1,250 kg • Lifting height: approx. 5,000 mm (duplex mast) • Battery weight: approx. 800 – 1,200 kg (typical for this device class) • Hours: 4776.6 Dimensions: • Width: approx. 170 cm (incl. wheels) • Length: approx. 310 cm • Height (mast retracted): approx. 312.5 cm Condition: • Used, good condition • Fully functional • N ...

Electronic crane scale MWT type 142Fabr. No.: 142571 year of construction 1993Tensile force meter, crane scaleMeasuring range: 2,500 to 80,000 kgSmallest measured value: 20 kgPower supply via 12 volts Cordless suspension shackle for double hooks, anchor hook operation, storage of the measured values and tare via remote control- Memory for measured values (weights)- Printer for measured valuesVery solid and high-quality body made of steelWeight: approx. 200 kg; used

BÜHLER ECOLINE S PRO 34 die casting machine was built in 2018 in Switzerland by Bühler AG. The machine was used occasionally and is in very good technical condition. The BÜHLER ECOLINE S PRO 34 is designed for the die-casting of aluminium alloy components. It enables the efficient, mass production of aluminium castings used, among others, in the automotive, electronics and machinery industries. In the die-casting process, liquid aluminium is injected under high pressure into a closed die. Once the die is filled, the material cools and precisely takes on the die’s shape. The combination of this technology with a high clamping force of 336 tonnes enables the production of repeatable castings with even the most complex geometries. The BÜHLER ECOLINE cold-chamber die-casting machine is part of a complete production line designed for aluminium die-casting. It includes an ABSOLENT  ...

Payload: 4000 kg Permissible total weight: 10790 kg Fork length: 1.2 m-2 m Lifting height: 3.45 m Recorded hours: 4577.77, still in operation

Folding machine FASTI type 2095-25-2,5Fabr. No. 94 295 004 Year of construction 1994Useful length 2540 mmmax. Sheet thickness 2.5 mmStroke of the upper beam 380 mmMotor power bending beam 2.2 kWWetz connection 400 Volt, 50 Hz- NC control FASTImatic FM100- one-piece pointed rail 135- controlled back gauge- continuous stop rail- controlled bending angle via control- electric foot switchesWeight 3000 kggood condition; used

A Linde electric forklift truck in need of repair is offered. Weight: 2250kg. The battery is in good condition and the forklift truck is operational. The lift control is defective and the sideshift has been fixed in position. An on-site inspection is possible.

Electric walking forklift, ride-on pedestrian stacker STILL type EGV 14Fabr. No. 330221900092 year of construction 2009Nominal load capacity 1400 kgLifting height 5475 mmFork length 1160 mmTotal length 1930 mmTotal width 860 mmOverall height 2330 mmOperating voltage 24 volt- Triplex mast with 1830 mm Free lift- 689.3 operating hours read- Battery from year of construction 08/2008, type 3 PZS 315 (24Volt / 315Ah)- Automatic charger- New TÜV test UVV (surcharge 150,-- EUR net)Weight 1440 kgGood condition, battery bad. Surcharge

We offer a refurbished Dokadek - 159,63m² with 70% discount All elements are made with original Doka Xlife formlining. The formwork was only used 1 x, was cleaned and checked and is in top condition New value approx. 102,205.60€ Special net price: 30.661,68€ 10 Dokadek element 0.81 x 2.44m 47 Dokadek element 1.22 x 2.44m 25 Dokadek balance beams 2.44m 21mm 26 Dokadek balancing beams 1.22m 21mm 10 Dokadek balancing beams 0.81m 21mm 63 Dokadek Wall Head 66 Dokadek support head 10 Dokadek Corner Head 5 Dokadek's crosshead 3 Dokadek mounting rod B 1 Dokadek stripping tool 25 Dokadek suspension brackets H20 3 Dokadek wall brackets 5 Dokadek panel pallet 1.22 x 2.44m 1 Dokadek panel pallet 0.81 x 2.44m 2 Dokadek range of compensating beams 3 Doka reusable containers 1.20x0.80m If you have any questions, please call 0049 176 70044689, Mr. Becker. Purc ...

Base plate, site fence base, barrier base -Footplates: made of concrete, 19 pieces -Intake: 6x Ø 45 mm -Price/delivery: complete -Dimensions: 620/220/H130 mm respectively -Weight 33kg/pc -Total weight: 627 kg

Printing technology: inkjet, ink technology: Epson UltraChrome HDR, color system: 11colors, max. printing resolution X/Y: 2880dpi/1440dpi, max. media format: 44inches/B0, media feed: roll paper/cut sheet, media thickness range: 0.08mm-1.5mm, interfaces: USB/Ethernet. Machine dimensions X/Y/Z: approx. 1864mm/667mm/1218mm, weight: approx. 116kg. An on-site inspection is possible.

Electric Forklift JUNGHEINRICH Type EFG-V20 MFGE115-450 DZFabr. No. 89.90.74.09 Year of construction approx. 2000Nominal load capacity 1900 kgLifting height 4500 mmFork length 1130 mmFork carriage width 980 mmOverall height 2000 mmOperating voltage 48 volt- triplex mast with full free lift 1400 mm- hydraulic sideshift battery from year of construction 2006 Type 6 EPZS 750 (48 Volt/ 750 Ah) - battery in poor condition- 4-wheel solid rubber - tires, front 200/50-10, rear rear 16x6-8- Hydr. Auxiliary steering- automatic charger Jungheinrich,

Load capacity: 1600kg, lift height: 3300mm, engine: Ford, drive: LPG. UVV inspection sticker 2026 available. The hydraulic system was serviced in 2026. Documentation available. Inspection by appointment possible.