gear hobbing fo used for sale

Max. size= 65 x 35 cm, Availability= 032025, izes-max. 350 x 650 mm sizes-min. 70 x 90 mm smallest fold 15 mm Equipment: continuos suction feeder width: 35 cm folding unit 4 bags complete folding rollers neu 2025 Suction drum feeder for papers up to 30 - 180 g/m² Suction drum new in 2025 counter vertikal sheet delivery GUK stream delivery LOT Loaded in truck or container

Manufacturer: Kuper, Type: ST 1 - 100, Year: 1990, Feeding belt mm: ca 2000, Foil wrapping machine mm: ca 1000, Foil stations: 2, Intermediate transport mm: ca 1500, Year :1990

Manufacturer: Schlichter, Type: SCW 14065, Year: 2011, Control: hand, Cycles approx.: 5-8, Schweissrahmenabmessung mm: 1400 X 650, Shrinking tunnel mm: 1400, Outlet conveyor mm: yes, Electrical power shrinking tunnel kW: 18, Heating: elektrisch, Through running hight mm: 350, Working width mm: 800, Folienkern: 900, Folienstärke mu: 8,5-60, Transportsytem: Band, Wight approx. kg: 1000, machine ready for demonstration: yes, Year :12/2011

Manufacturer: Kuper Schrumpffolienanlage Duplex, Year: 1993, Foil wrapping machine mm: 2 Fach, Welding frame dimensions mm: 1500, Intermediate transport mm: 1900, Shrinking tunnel mm: 4600, Outlet conveyor mm: 2500, Total connection value in kW: 65, Foil 1 width mm: 1500, Through running hight mm: 1150 X360 , Required space L x W x H mm: 4600 X 2100 X 1400, Year :1993

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1120mm -Cross section: 140 x 60 mm -Recording: see photos -Dimensions each: 1220/140/H620 mm -Total weight: 210 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 935mm -Cross section: 140 x 50 mm -Recording: see photos -Dimensions each: 1040/140/H660 mm -Total weight: 156 kg

Manufacturer: Clark Gabelstapler, Type: CGP 25, Year: 1999, Drive type: Gas, Construction type: Frontstapler, Lift mast type: normal, Fork length in mm: 1250, Operating hours: 3414-7, Lifting power kg: 2500, Lifting hight approx. mm: 3300, FREE TEXT: Seitenschieer, Year :1999

Manufacturer: Weinig, Type: H 17 AS, Year: 1986, Planing widht mm: 230, Number of spindles: 9, Tool exchange places: yes, Separate engine per spindle: yes, Feeding - kW: 11, Feeding speed min-max m/min: 60, Feeding speed continous adjustable: yes, Table length: ca. 4000 mm, 1.Bottom spindle kW: 4, 2nd spindle on right kW: 4, 3.Left spindle kW: 5,5, 4th spindle on right kW: 4, 5.Top spindle kW: 7,5, 6th spindle at bottom kW: 5,5, 8th spindle at bottom kW: 7, 8th spindle on left kW: 4, 10th universal on left kW: 5,5, FREE TEXT: Inverter for feeding., Year :1986

Button machine, knee lever press, crimping machine, eyelet machine, workshop press with foot pedal -Knee lever press: with foot pedal, on solid base frame -Table size: 260 x 180 mm bore Ø 60 mm -Spindle holder: Ø 32 mm -Intermediate dimension: 135 mm -Dimensions: 460/400/H1450mm -Weight: 113 kg

Manufacturer: Sicar, Type: P5N/230, Year: 1989, Control: yes, Planing widht mm: 230, Planing hight mm: ca.130, Number of spindles: 5, Rotations of spindles max. rpm: 6000, Separate engine per spindle: yes, Feeding - kW: 1,5, 1.Bottom spindle kW: 5,5, 2nd spindle on right kW: 5,5, 3.Left spindle kW: 5,5, 4.Top spindle kW: 7,5, 7th universal on left kW: 5,5, Year :1989

Manufacturer: Weinig, Type: Unimat 17, Planing widht mm: 170, Planing hight mm: 120, Spindle diameter in mm: 35, Rotations of spindles max. rpm: 6.000, Spindle arrangement: U / R / L / R / O / U, Feeding - kW: 4, 1.Bottom spindle kW: 4, 3.Left spindle kW: 3, 4th spindle on right kW: 3, 5.Top spindle kW: 4, 6th spindle at bottom kW: 4,

Manufacturer: HSM , Type: Rotationsquerschneider, Year: 2012, Control: Siemens, Längenogabe: yes, Stückzähler: yes, Cross cutting guillotine: yes, Cutting lenght mm: 1.500 - 2.620, Schnittbreite min-max mm: 600 - 2.100, Abstapelung der Funierblätter: für Folien, Hebebühne: yes, machine ready for demonstration: yes, FREE TEXT: Anlage wurde um einen UV Strahler und ein Kühlaggregat erweitert/ Vorschub max.40 Meter, Year :2012

Manufacturer: Bermantingen, Type: DIXI 30 S, Hydraulical/pneumatical: Hydraulisch, Presskraft max.kN : 300, Zykluszeit Sekunden: 29, Presszeit Sekunden: 14, Höhe vom Boden cm: 94, Geteilte Einfüllöffnung B x H cm: 107 X 26, Höhe vom Boden cm: 94, Breite cm: 160, Höhe cm: 317, Ballen ausgeworfen B x H x T: 120 x 80 x 80 x 110, Ballengewicht Kg: 270-360, Weight approx. kg: 2180,

Manufacturer: Weinig, Type: Unimat 17, Planing widht mm: 180, Planing hight mm: 120, Number of spindles: 7, Elektronische Achsverstellung: no, Work piece width min-max mm: 180, Min.-max. workpiece length in mm: 350, Wellendrehzahl: 6000, Spindles: 6, Spindle diameter in mm: ca 40, Spindle arrangement: U / R / L /R / O / U / Uni, 1.Bottom spindle kW: 4, 2nd spindle on right kW: 4, 3.Left spindle kW: 4, 4th spindle on right kW: 4, 5.Top spindle kW: 4, 6th spindle at bottom kW: 4, 7th universal on left kW: 4,

Manufacturer: Yale, Type: GLP30VX V2395, Year: 2010, Fork length in mm: 1200, Lifting power kg: 3000, Lifting hight approx. mm: 3505, Total power kW: 38, Wight approx. kg: 4250, Year :2010

Manufacturer: Kuper, Type: KFE TAN 2 1600/450, Year: 1979, Control: Kuper, Foil wrapping machine mm: 1600, Foil stations: 1, Welding frame dimensions mm: 1450, Intermediate transport mm: 3.000, Shrinking tunnel mm: 4.800, Schrumpftunnel kW Leistung: 70, Heating: Elektro - 59 kW, Through running hight mm: 200, Working width mm: 800, Conveyour system: Band/Stange, Year :1979

Manufacturer: SCM, Type: P64, Year: 1988, Planing widht mm: 180, Planing hight mm: 105, Number of spindles: 4, Rotations of spindles max. rpm: 6000, Separate engine per spindle: no, Main engine kW: 4, Fully suspended drive feeding: yes, Feeding - kW: 2,5, Feeding speed continous adjustable: yes, Tischlänge mm: 2000, Adjustment - electonically: no, Noise enclosure: yes, Compressed air bar: yes, Wight approx. kg: 2000, Year :1988

Manufacturer: Linde, Type: E 30-02, Year: 2004, Drive type: elektro, Lift mast type: Duplex, Total hight mm: 2300, Fork length in mm: 1300, Operating hours: 5463,5, Lifting power kg: 3000, Lifting hight approx. mm: 3640, FREE TEXT: Kabine/Joystick steuerung/Sitzheizung/Heizung/Gabelverbreiterng/Ladegerät/Verfügbark eit, Year :2004

Manufacturer: Ziwo, Type: CL 11.10, Year: 1996, Work piece width min-max mm: 0 - 300, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 5 - 150, Wight approx. kg: 210, FREE TEXT: Beschickung, Year :1996

Manufacturer: Weinig , Type: Unimat 17 A, Year: 1979, Control: hand, Planing widht mm: 10-170, Planing hight mm: 10-120, Min.-max. workpiece length in mm: 300, Number of spindles: 6, Diameter of the spindle mm: 30, Fast exchange device: no, Rotations of spindles max. rpm: 6000, Separate engine per spindle: yes, Fully suspended drive feeding: no, Year :1979

crane fork, loading fork, load fork, pallet fork, pallet crane fork -Crane fork: with manual balancing -Load capacity: kg -Tine length: 730 mm -manual weight compensation -Fork: adjustable up to 1040 mm -Useful height: adjustable 1170 to 1960 mm -Dimensions: 1060/865/H1130 mm -Own weight: 108 kg

Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones -Type: RSD II 8 -P max: 28 kW -Transport dimensions: 490/430/H460 mm -Weight: 30 kg

Manufacturer: MSK, Type: 290, Year: 1989, Cycles approx.: max ca. 240 / h, Electrical power shrinking tunnel kW: 366 kW - Gas, Through running hight mm: 2200, Working width mm: 800, Länge max 1200 mm, Year :1989

Manufacturer: Maskiner, Type: LPFK 2P 400 HKM, Year: 1997, Steuerung : Programm, Foil wrapping machine mm: yes, Foil stations: 2, Intermediate conveyor mm: yes, Shrinking tunnel mm: 300, Auslaufband mm: no, Electrical power shrinking tunnel kW: ca 30, Gesamtanschlusswert kW: 30, Foil 1 width mm: variable, Foil 2 width mm: variable, Through running hight mm: 150, Working width mm: 220, Year :1997

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: DETA, charger type WE 24/64 S -Input voltage: 220 V 50 Hz -Power: 24 V/64 A -Dimensions: 455/380/H810 mm -Weight: 51 kg

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Still, charger type E 24/50 SL -Input voltage: 220 V 50 Hz -Power: 24 V/50 A -Dimensions: 555/430/H750 mm -Weight: 50 kg

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Charger for forklifts: Miditron Type D 400G 48/100 PWF-PMT -Input voltage: 400 V 50 Hz -Power: 48 V/100 A -Dimensions: 555/530/H690 mm -Weight: 112 kg

Manufacturer: SCM, Type: P64, Year: 1988, Planing widht mm: 180, Planing hight mm: 105, Number of spindles: 4, Rotations of spindles max. rpm: 6000, Separate engine per spindle: no, Main engine kW: 4, Fully suspended drive feeding: yes, Feeding - kW: 2,5, Feeding speed continous adjustable: yes, Tischlänge mm: 2000, Adjustment - electonically: no, Noise enclosure: yes, Compressed air bar: yes, Wight approx. kg: 2000, Year :1988

REF-0 ULMA SLX-305 L-SEALER WITH TR-100 SHRINK TUNNEL Automatic angular L” sealing machine with shrink tunnel. Manufacturer: ULMA. 1) Sealer model SLX 305: − Year: 2020 − Serial no.: 4515898 − 400 V / 50 Hz / 3.5 A / 3PH − Total power: 2.6 kW − Overall dimensions: 2,400 x 1,500 x 1,720 mm (LxWxH) − Maximum sealing bar dimensions (max. package dimensions): 550 x 550 x 200 mm (LxWxH) − This machine can be used not only for packaging with shrink film (when used together with the shrink tunnel), but also with non-shrink film 2) Shrink tunnel model TR 100: − Year: 2020 − Serial no.: 1511748 − 380 V / 50 Hz / 25 A / 3PH − Total power: 24 kW − Overall dimensions: 2,000 x 1,400 x 1,200 mm (LxWxH) − Chamber length: 1,335 mm − Aperture: 400 x 230 mm (WxH) Overall dimensions of the set: 4,000 x 1,500 x 1,720 mm (LxWxH)

Number of boring spindles: 8 St. Working width: 20 - 230 mm Working height: 8 - 120 mm Length of the planing table: 2.500 mm Feed motor: 4 kW Feed speed: 5 - 24 m/min. total power requirement: ca. 60 kw Dimensions (L/W/H): mm weight of the machine ca.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Hagen Battery, Charger Belatron Type E220 G24/50 B-FB -Input voltage: 220 V 50 Hz -Power: 25.2 V/50 A -Dimensions: 540/330/H420 mm -Weight: 40 kg

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Jungheinrich, charger type DLW 12/20 SN -Input voltage: 220 V 50 Hz -Power: 12 V/20 A -Dimensions: 410/200/H340 mm -Weight: 12 kg

lifting mast, stacker mast, forklift mast, lifting frame, rear loader -Manufacturer: Clark, forklift mast from forklift type C500-Y80 -Load capacity: approx. 4000 kg -Lifting height: mm -Recording/Dimensions: see photos / technical drawing -Dimensions: 1245/420/H2350 mm -Weight: 1120 kg

Fork carrier, forklift blade, pallet fork, forklift fork, for wheel loader, forklift, telehandler, stacker, tractor -Fork carriage: without forks -Load capacity: 1500 kg -Beam width: 2500 mm -Forks: available in a wide selection -Total dimensions: 2500/130/H400 mm -Weight: 370 kg

Intermediate plate for pillar jib crane, crane foundation plate, indoor crane, workstation crane, crane foundation plate -Pillar jib crane: intermediate plate/base plate, outside: Ø 1050 mm -Thickness: 40 mm -Bolt circle inside: Ø 530 mm / M thread -Outer bolt circle: Ø 1410 -Own weight: 576 kg

four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 310 mm -Passage: Ø 98 mm -Bolt circle: Ø 290 mm -Jaw width: 26 mm / interchangeable jaws not included -Dimensions: Ø 310 x 90 mm -Weight: 24 kg

four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 190 mm -Passage: Ø 57 mm -Bolt circle: Ø 170 mm / M10 -Jaw width: 20 mm / interchangeable jaws not included -Dimensions: Ø 190 x 70 mm -Weight: 8.5 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Charger: for forklifts, type D 24/200 MULTI WF200 -Input voltage: 400 V 50 Hz -Power: 24 V/200 A -Dimensions: 555/520/H890 mm -Weight: 119 kg

Four jaw chuck, four jaw lathe chuck, 4 jaw chuck -Manufacturer: AROWA, four-jaw chuck No. 4 chuck size Ø 138 mm -Passage: Ø 37 mm -Bolt circle: Ø 120 mm -Dimensions: Ø197 x 110 mm -Weight: 11 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1400 mm -Cross-section: 125 x 45 mm -Recording: see photos -Transport dimensions: 1520/560/H125 mm -Total weight: 148 kg

Centrifugal fan, centrifugal fan, centrifugal fan Heavy duty ABB FOU HD 87L 4 2P ADXR0 9 Inlet: Ø approx. 360 mm < br /> Outlet: 270 x 450 mm Motor : 75 kW 2965 rpm 380 / 660 V used, ! weight approx. 950 KG Dimensions: 1200 x 1400 x 1650 mm

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1800 mm -Cross-section: 200 x 60 mm -Recording: see photos -Transport dimensions: 2060/1080/H200 mm -Total weight: 487 kg

Lifting mast, stacker mast, forklift mast, lifting frame, rear forklift -Manufacturer: Baumann, forklift mast from sideloader type AS 60/18/15 -Load capacity: approx. 6000 kg -Lifting height: mm -Recording/Dimensions: see photos / technical drawing -Transport dimensions: 3200/1620/H750 mm -Weight: 2100 kg

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for electric forklift type E20 -Load capacity: 2000 kg -Dimensions: see photos / technical drawing -Dimensions: 2530/1150/H415 mm -Weight: 1070 kg

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, triplex mast -Manufacturer: Linde, Triplex mast for electric forklift type E20 -Load capacity: kg -Dimensions: see photos / technical drawing -Dimensions: 2230/1150/H375 mm -Weight: 920 kg

Force gauge, force measuring device, calibration, force measurement technology, scale, crane scale, hanging scale -Manufacturer: dynafor , tensile force measuring device crane scale -Measuring range: up to 20 t -Dimensions box: 490/160/H160 mm -Total weight: 12 kg

Machine foot set (2 pieces each), wedge feet, levelling shoe FIXATOR support height: 77 - 82 mm contact surface: Ø 75 mm with level increase Ø 100 mm x 50 mm and Ø 100 mm x 3 mm anchor bolt M20 2 pieces each Weight: each 8.9 kg used, tested ! Dimensions(one foot): 195 x 120 x 200 mm

Used Robopack Ariane 4535ZT foil wrapper. "L" type sealer with integrated shrink tunnel.

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1195 mm -Cross-section: 100 x 45 mm -Recording: see photos -Transport dimensions: 1370/610/H100 mm -Total weight: 112 kg

2000x1100x1100 mm