gear hobbing fo used for sale

Used flow pack packaging machine. Manufacturer Chemosvit Strojchem, model BH-07W. New 2017. Capacity 15-250 pcs/min. Available 3 pcs. (2 used and 1 almost unused)

M. No.: 0392 Equipment / Additional information: Feeding width (mm): 500 Kw: 7.5 A: 380

- Hand & foot control - integrated ambos - solid substructure Specifications: - Hammer weight: 40 kg - Lifting height: 230 mm - Projection: 240 mm - Cylinder Ø: 140 mm - Motor power: 4 kW - Voltage: 400 V - Dimensions WxHxD: 700 x 1900 x 1200 mm - Weight: approx. 900 kg

Flatpile Feeder, 4 Pockets, Delivery

Footplate, site fence foot, barrier foot -9 pieces: TL plastic footplate -Price/fee: complete -Dimensions: 820/420/H110 mm each -Weight 27 kg/piece -Total weight: 246 kg

Forklift motor with gear, electric motor, direct current motor, traction motor, drive motor -Voltage: 22 volts -Power: 5.2 KW -Speed: 2800 rpm -Shaft: Ø 28 mm -Number: 2x available -Price: per piece -Dimensions: 290/H230 mm -Weight: 26 kg

Forklift motor with gearbox, electric motor, DC motor, traction motor, drive motor -Voltage: 23 volts -Power: 3 kW -Speed: 1705 rpm -Drive motor for: Steinbock forklifts -Dimensions: 375/230/H200 mm -Weight: 25 kg

I sell the four-side planer Futura P-MAX 23/5+UNIV, built in 2008. 6 Spindle: bottom - right - left - top - bottom - universal Electronic programming for working width, working height and feed speed. Element max. 230x170mm ! All 6 spindles 6000 rpm. Material prints for short elements. Weight 2500kg. 1-zone pneumatic material pressure system for feed Fully operational. Available the same. Exhibition machine, has worked very little !

Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!

Four-jaw chuck, four-jaw lathe chuck -Chuck size: Ø 250 mm -Bolt circle: Ø 230 mm -Recess:Ø 210 mm -Passage: Ø 80 mm -Scope of delivery: as per pictures, without additional jaws -Weight: 19 kg

Janssen Moulding Roller for K12 K600 pastry forming machines Diameter: 58.5 cm

Janssen Moulding Roller for K12 K600 pastry forming machines Diameter: 58.5 cm

Janssen Moulding Roller for FM128 K4 pastry forming machines Diameter: 23,9cm

Control unit, control panel, control panel, control unit, keyboard, screen, control -Two-hand control panel with: foot switch -Dimensions: 460/370/H920 mm -Weight: 18 kg

Four rollers calander make OMEC Mod. FX4 190 1330 x2.5 / 3.0 Year 2019 NEVER USED - PRACTICALLY NEW Siemens CNC.

Butter Forming & Wrapping Machine Manufacturer: BENHIL Type: 8380 Working hours: 0 since reconditioned Capacity: 40... 90 Pa./min, infinitely adjustable Products: Butter, Margarine etc Choose Format: 250 gr. (100x70x35 mm) Folding: bottom folding Packing material: aluminium foil, parchment paper Dosing: volume doser from 100 .. 300 gr. Dosing precision: +/- 1 % Energy: 380 V/50 Hz; 2,2 KW Weight: 1.600 k

Welding rail -from: Röschermatic VM-19/S/CE vacuum unit -Length: 495/90/H 160 mm -Weight: 1.5 kg

Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm

Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm

Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm

Moulding roller pastry roller Nicholas Overall Length: 23.9cm for pastry moulding machine Kalmeijer

DESCRIPTION: • Format range folding carton B 30-100, H 15-75, L 70-200 mm • Capacity 10-80 folding cartons/min, clocked • For offset plug-in closure on both sides • Centrally adjustable cup chain • Product feed for blister via blister stack shaft • Monitoring of packaged goods height in cup chain • Code reading Laetus Argus 4 for 2x brochure code (front + back), 1x folding carton code, 1x brochure presence in folding carton • Brochure folding and inserting machine from the magazine GUK FA 21/4 Cartonac 91 • Colour embossing station for folding flap opposite the insertion side, 2-line, with embossing numbers • Poor ejection with anti-ejection control • Vacuum generators • SPS Eberle PLS 514 • Connection 400V/50Hz

all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute total power 8 kW air consumption ± 300 L / min. mobile with mould trolley variable speed 3x400v 50hz with bridge breaker dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg PLC control

Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.

Format range: 720 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue with 2 application heads, disc glue on the left, Bobst CUBE control, vibrator & dental gauge on the feeder, Pre-crusher right and left, kicker, counter, digital position indicators, Folding floor module A2 with additional means transport above / below, additional means transport at the top / bottom of the fold, pneumatic Press belt. Overhaul 2022: cleaned, tested, painted, new Feeder and transport belts. Other: Machine can be visited by arrangement while running.

all stainless steel belt width 600 mm to form meat balls from 6 to ± 80 gr suitable to put in line with a forming machine (VM 400) adjustable speed mobile dimensions (l x w x h) : ± 1.300 x 700 x 1.500 mm

Ser. No.: L. 09/31 // Fabr. No.: 0270180/1 Pockets : 4 parallel fold Format (mm): max. 297 x 420 // min. 148 x 210 Equipment / Additional information: With delivery A45/1A-DC Power 400V

AGFA CR System CR 85-X: First Processing Station (Workstation) AGFA CR MD4.0 General cassettes and ADCC HR Kassetten_ different sizes 18x24, 24x30, 35x43 (11 pieces)

Part Number 6338 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 160mm 5,5kW 3) vertical left 160mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 7,5kW 6) horizontal bottom 230mm 7,5kW 7) universal 360° 230mm 7,5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - all spindles equipped with a brake - spindle speed 6000rpm in advance: - 6 pulling, toothed, metal introductory shafts, including 2 double - 4 pulling shafts, rubber including 1 double - 3 clamps on the lead bottom: - pressure from the side on the inlet - introductory shaft, toothed, pulling, swivel in the lower table top - 3 pull rollers, metal, smooth - pneumatically adjustable shafts - length of the introductory table top 1190mm - central lubricati ...

Pastry moulding machine Kalmeijer KGM biscuit moulding machine Pastry moulding machine Type: Kalmeijer KGM with 2 forming rollers 10 baking trays thickness of the dough figures is adjustable Dough hopper, forming roller, dough feed roller is easily removable for cleaning Easy to use The trasnport belts for the sheets can be folded in and out Machine requires little space Machines can be driven on rollers Dimensions: Height: 122cm Width: 170cm Depth: 52cm

Part Number 6368 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 130mm 5,5kW 3) vertical left 130mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 11kW 6) horizontal bottom 230mm 18,5kW 7) universal 230mm adjustable at 360 degrees 5.5kW - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 electrically adjustable up/down - from above 8 metal pulling introductory shafts, swivel including 2 double - from above 4 pulling rollers, rubber - pressure from above 2pcs - from the bottom of the ratchet - from the bottom from the side 3 clamps - from below 2 metal rollers, smooth, pulling - from the bottom 2 double rollers, pulling, rubber - pneumatically pressed shafts ...

Part Number 6393 TECHNICAL DATA - max width of the workpiece 200mm - max height of the workpiece 150mm - number of spindles 4: 1) horizontal bottom 200mm 5,5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal upper 200mm 5,5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000rpm in advance: - pulling introductory shafts, toothed 6 pcs including 2 double - 1 pulling shaft, rubber bottom: - introductory shaft toothed, pulling, torsional in the lower table top - side pressure 3pcs - lead roller, pulling, metal, smooth - all pneumatically pressed rollers - length of the introductory table top 2130mm - table top adjustable up / down - central lubrication - electrical setting of planing thickness - lifting motor 1,1kW - smooth regulation of the feed speed on the inverter - feed motor 3kW - feed  ...

1250 x 2500mm TLF 2000w Laser STOPA Sheet storage, SheetMaster, ToolMaster, SortMaster Year: 2005

Very nice Heidelberg Stahlfolder TI 52 with 4 pockets. it is still in production, 180 m/min, built in 2001

Stainless steel container 5,000 litres, 2 chambers 50/50, 2 x lid, insulation, 2 x floor drain tap, 2 x 2,500 litres, Ca-abemssungen: length 2,900 mm, width 1,300 mm, height 1,600 mm Price ex works

- Pallet feeder T 1020 FP 112 - 1. Station T1020-1-1020/6 buckles - 2. Station T800-M-2-88/6 buckles - Z2 mobile cross fold station - DESTA FSA 1000 delivery (1996)

Thermal oil boiler Heuft HK 80 -with burner -Heating capacity : 80 kW -zul. Operating overpressure : 4 bar -zul. Operating temperature : 300 C -Content : 38,5 / 400 L -Minimum volume flow : 6 -Operating voltage : 400 Volt -Control voltage : 230 Volt -Connected load : 4.6 kW -Rated current 8.5 A -Year of construction 2002

NEAGARI SHIBUYA Radial Forging Machine Model BF-350 New 2010 Specifications 1. Machine components (1) Bar-Forging Machine: 1 set (2) Manipulator: 2 set (3) Hydraulic System: 1 set (4) Electric Power & Control System: 1 set (5) Foundation: 1 set (6) Unloader: 1 set (7) Work Support: 6 set (8) Work Support (center): 2 set (9) Mandrel (IN): 1 set (10) Mandrel (OUT): 1 set (12) Die Changing Unit: 1 set 2. Work Piece 2-1. Material (1) Tool Steel (EX. DIN-X40CrMoV51AISI-H13JIS-SKD) (2) C-steel 2-2. Starting Dimension (1) Round: max. diameter 450mm (2) Square: max. flat to flat 240mm (3) Max. Length: 3500mm (4) Max. Weight: 3000kg 2-3).Forged Dimension (1) Min. Diameter: 80mm (2) Min. Square: 120mm (3) Max. Length: 8000mm (4) Max. Weight: 3000kg 3. Bar Forging Machine 3-1. Forging Ability (1) Number of rams: 4 (2) Force / ram: max. 7000kN (3) Hydrau ...

Folding machine MBO T49/4, machine number 83067246, 4 pockets + delivery, flat stack feeder, counter, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Hamburger forming machine, Sind, NEW Capacity: 2100 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

Replacement fiber laser module IPG 30 Watt for FOBA labeler DP30F Model: YLP-V2-1-100-30-30 also available in 10 and 20 watts Fiber length 3 m, interface E Adapter for interface B1 in stock MA-107437 o. Target Laser Delivery: EXW, collection possible VAT will be shown

Hamburger forming machine, Sind, NEW Capacity: 1000 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 195 mm -Passage: Ø 62 mm -Weight: 9 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -comes from: a Still forklift -Drive: 24 V 2 kW -Dimensions: 370/500/H350 mm -Weight: 82 kg

three-phase motor, electric motor -Power: 2.2 kW -Speed: 945 rpm -Remark: Foot holder partially defective, see photo -Shaft: Ø 28 x 60 mm -Design: B3 -Dimensions: 420/290/H220 mm -Weight: 42 kg

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 160 mm -1 set: outside jaws -Passage: Ø 42 mm -Weight: 11.2 kg

Format range: 1150 mm, min. 86 mm Equipment: Longitudinal seam, folding floor, double edge, electronic upper glue unit with 2 application heads, Disc upper glue unit, disc glue unit on the left, Pre-crusher right and left, kicker, counter, medium transport in folding, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new Feeder and transport belts equipped.

Pallet feeder FP 120 Navigator control 6 folding pockets in the parallel fold section 2 folding knives in the cross fold section 1 additional folding pocket after the 1st cross fold Window cassette Crossfold section can be lifted up for servicing rollers Pocket rollers can be pulled aside for servicing Noise absorbing hood Rollers in good condition Without delivery Included: MBO FW II-560/4 Second unit (variable) width 56 cm Station: 4 folding pockets 56 cm following knife shaft noise absorbing hood

Main drive = drive unit with motor and gearbox: SEW-Eurodrive K76 DT100LS-4TF/VS with motor fan A2E200-AA01-65

2018 Forge from 60 to 400 Ton Forging and Annealing Furnace ATI furnace It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm