127,273 used machines on RESALE, but how to find them? Machine Search
max. wheel diameter:275 mm gear width:58 mm max. module:8 min. module:0,5 weight of the machine ca.:10 t max. number of teeth:200 min. number of teeth:5
max. wheel diameter:275 mm gear width:58 mm max. module:8 min. module:0,5 weight of the machine ca.:10 t max. number of teeth:200 min. number of teeth:5
Industrial gearbox / drive unit make Stöber. The units come from stock and were not installed. Manufacturer: Stöber Antriebstechnik GmbH + Co. KG Type: S402SF0350 Condition: unused / Stock goods Type: S402SF0350 Gear ratio: i = 34.92 Oil: CLP 220 Oil volume: 2.70 l
Stock number: 3984 GEAR MILLING MACHINE Manufacturer: STAEHELY, Type: SHA 506 Machines NO.: 10442, Year of manufacture: 0 Specifications: Module 6 Table size 300 mm Ø Spindle speeds 100-500 rpm Accessories: Zuadds gear Operating instructions Length: 2200 mm, Height: 2000 mm, Width: 1300 mm, Weight: 4860 kg
Stock number: PT1067, Gear pump, stainless acid proof steel,, ECO type GM4-KCT-KKS., 0,25 kW motor, 910 rpm.,, 220/380 volt., Ø 1/2 connections,, theoretical capacity 400 l/h., Material: Stainless acid proof steel AISI 316
Milling axes, dividers, grinding wheels, High: 1765 mm, Tall: 1765 mm, Weight: 2500 Kg, Width: 1100 mm, Long: 2570 mm, Ø tool: 250 mm, Total power: 7.5 kva., Ø of the grinding wheel: 250 mm, Travel of table: 400 mm, Height of points: 125 mm, Height of centers: 125 mm, Max. Ø to be sharpened: 250 mm, Power wheel motor: 3 Kv., Manufacturing number: 1905.04, Ø max to sharpen: 250 mm, Grinding wheel motor power: 3 Kv., Distance between points: 635 mm, Table tour: 400 mm, Revolutions of the wheel: 1750/2150/2850 mm, Length between points: 635 mm, Maximum length to sharpen: 400 mm, Revolutions of the grinding wheel: 1750 / 2150 / 2850 mm, Radial travel axis wheelhead: +35 / -65 mm, Maximum length to be sharpened: 400 mm, Vertical travel of the wheel: 175 mm, Vertical travel of the grinding wheel: 175 mm, Radial travel of the grinding wheel shaft: +35 / -65 mm, Cone holder shaft clamping pi ...
Stock# U2457-3 Used stainless steel horizontal screw conveyer by Van Beek BV (NL) type "U", model TR300. Width of the gutter 315 mm. Screw has diameter 300 mm, lead of the screw 270 mm, total length of the screw 290 cm. Conveyer has two inlets, each with diameter 298 mm and rotary magnetic separator by Goudsmit Magnetic Systems (NL). Each separator is driven by el motor and reducer 0.18 kW, 1320/21 rpm, 220-240/380-415 V, 50 Hz. Spacing between center axis of each inlet is 145 cm. Conveyer has also two rectangular discharge outlets, each with dimensions: 240 mm x 250 mm. Spacing between centers of discharge outlets - 250 cm. Screw is driven via reducer and el motor 2.2 kW, 220-240/380-415 V, 50 Hz. Working rotation of screw up to 64 rpm. Last time machine had been working in food industry as a collector of powdered products from two vibrating screens.
Key data: 4000 mm, 1560 mm, 32
CNC Gear Gringing machine HOFLER H4000 Year 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition This machine was used to grind the gears for the US nuclear submarine transmissions (gearboxes). The machine was originally purchased new by General Electric for the Lynn Massachusetts Facility. We purchased it from them in excellent c ...
Hydraulically switchable gearbox for change of direction of rotationHydraulic reverse gear of latheYear of construction approx. 1985Alternating gearbox for fast change of direction of rotationClockwise or counterclockwise rotation- electric hydraulic pump for hydraulic pressure generation (380 volts, 0.25kW)- 2 pieces of solenoid valves for switching from left to clockwise rotation- equipped with pulleys 230 and 200 mm- was driven by a 15 KW drive motor, fast change of direction of rotation with high torque transmission- Drive motor always runs on the right, gearbox is hydraulically activated
Column drilling machine GOTHABear power 30 mmSpindle holder MK 3 - long quill, throat depth 350 mmPine stroke 200 mmTable size 460 mmSpindle speed 160 - 750 rpm. 4 stepsFeed rate 0.1 - 0.2 - 0.3 mm/COLUMN diameter 160 mmMotor power 2.2 kWNerg connection 380 volts, 50 Hz- Spindle speed via 4 gear stages- Automatic feed- Rotatable drilling table with mechanical clamping- Table height adjustment via hand crank- Clamping surface at the machine foot 450 x 450 mmSpace required L x W x H 700
Column drill INFRATIREA - ORADEA type PH - 031Series. No. 02434 Year of construction 1975Drilling capacity 40 mmSpindle holder MK 4 - short quillThroat depth 320 mmQuill stroke 250 mmTable size 400 x 400 mmColumn diameter 160 mmSpindle speed 85 - 1500 rpm. 6 gear stagesMotor power 2.2 kWNet connection 400 volts, 50 Hz- Spindle speed via 6 gear stages- Clockwise and counterclockwise rotation- Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/U- Drilling table swivelling- Table height adjustment via
1 of used gearbox, Lenze type 52.162.06.000, ratio I=15,53. Overhauled with new bearings, seals, oil, silent block and spider.
1 of used gearbox, Lenze type 52.162.06.00, ratio I=10. New 1994. Overhauled with new bearings, seals and oil.
1 of used gearbox, Lenze type 52.110.10.14, ratio i=15. Example pictures only. Various mounting bracket versions available. Enquire for details.
1 of used gearbox, Lenze type GKS04-3 N HBR 1C, i=16,087. Overhauled and fitted with new seals (except output side) and oil (CLP 460).
1 of used gearbox, Lenze type 12.602.12.6.4, ratio i=6.3. Can also be supplied in overhauled condition. Enquire for details.
1 of used gearbox, make Lenze, type GKS04-2 N HBR, 0804, A 000, 81 NM, 171,2 r/min, CLP 460, i = 8,178.
Right-angle gears, as good as new
A small geared drilling machine Knuth is available. Drilling capacity steel: 25mm, thread cutting steel: M10-M12, spindle taper: MT3, speed: 2900rpm, quill stroke: 400mm, arm reach: 250mm, table dimensions X/Y: 270mm/300mm. Machine dimensions X/Y/Z: approx. 600mm/600mm/1200mm, weight: approx. 200kg. An on-site inspection is possible.
Right-angle gears, as good as new
A gear flank grinding machine Reishauer, completely overhauled by Burri Werkzeugmaschinen, is available. Grinding spindle speed: 3500rpm, cutting speed: 63m/s, max. gear diameter: 360mm, module range: 0.1-7, number of teeth: 6-600, max. workpiece height: 160mm, max. helix angle: +/-45°, max. workpiece weight: approx. 60kg. Min. wheel root circle diameter: 250mm, grinding wheel dimensions X/Y/Z: 350mm/104mm/160mm, grinding worm diameter range: 270mm-350mm, max. grinding width: 175mm, max. workpiece speed: 800rpm. Includes profiling devices, balancing device, structure-borne noise contact control, compact filter system, cooling unit, cooling water recooler, robot automation, and transport trolleys. Documentation available. An on-site inspection is possible.
Lifting capacity: 52t, drive shaft diameter of the hollow shaft: 245mm, brake shaft dimensions: 100x190mm, drive shaft dimensions: 80x140mm, ambient temperature: -15 to 45°C, center distance: 1105mm, rated power: 275kW. The gear is still unused. An on-site inspection is possible.
Cleanable transport screw Brand: van Beek (The Netherlands) YOM: 2016 Screw length: 1550mm Screw dia: 310mm The screw can easily be extended to clean. Dimensions ready for use: LxWxH 2800mm x1300mmx1150mm Dimensions ready to clean (extended) LxWxH 4250mm x1300mm x 1150mm Condition: very good Video's available.
Key data: 630 mm, 8
A used gear pusher Lorenz S8/630 with interchangeable wheels.
Key data: 630 mm, 8
Max. outer diameter (gear): 630 mm Max. inner diameter (gear): approx. 750 mm Max. tooth width: 180–200 mm Max. module: 8 Shock stroke: up to 220 mm Stroke rate: 47–300 strokes/min Tool holder: MK 4 Drive power: approx. 8 kW Total connected load: approx. 10–12 kW Njbmsww Er Hompw Spjwk Machine weight: approx. 5,500–5,800
Geared motor SWE TYPE: R43DT71D2BMG Number:1046485101003996 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg20,21, Qty 1x
TYPE: R43DT71D2BMG Number:1046485101000796 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg 20,21, quantity 1x
TYPE: R43DT71D2BMG Number:1046691501000596 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg 20,21, quantity 1x
TYPE: R43DT71D2 Number:10466770602002396 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg 17,03
TYPE: R43DT71D2 Number:1046227901001996 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg17.03
TYPE: R43DT71D2BMG Number:1046405101000796 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg 20,21, quantity 1x
Various geared motors, one with inverter: NORD electric motor 7.5 kW with parallel shaft gearbox ratio 41.94 (No.1) Geared motor MUCHNA type 63A 1.5kW n1/n2 140/18 rpm (No.2) Electric motor 18.5 kW 1460rpm VEM motors (No.3) NORD Geared Motor 11kW with Inverter and External Fan (No4) NORD Gear Motor 5.5kW n2/n1 1450/142 (No5) For prices, nameplates and further details see: kleinanzeigen.de/s-bestandsliste.html?userId=37037422
Six geared motors Lenze in mint condition are available. Gear ratio: 7.617, motor type: G50BB160MVBR3C00, oil type: CLP 460, oil quantity: 1.4l, degree of protection: IP55, insulation class: F, efficiency class: IE3, operating mode: S1, max. power: 7.35kW, max. speed: 2580rpm, weight: approx. 70kg. An on-site inspection is possible.
Key data: 3500 mm, 20
HÖFLER Porta 3500 CNC Gear Grinder – As Is” with Limited Use We are offering a unique opportunity to acquire a HÖFLER Porta 3500 CNC Spur/Helical, Internal/External Gear Grinding Machine – a rare and powerful machine with low hours, available in As Is” condition at a negotiable price. Machine Overview: • Make/Model: HÖFLER Porta 3500 CNC • Year New: 2007 • Installed: 2010 • Total Hours: Only 6,800 since installation • Design: Later-generation traveling gantry • Condition: Structurally and mechanically sound, but currently not operational due to uninstalled hydraulic drive motor (refurbished and included). • A full assembly report detailing remaining work can be provided upon request. Key Specs: • Max external grinding diameter: 137.8” (3500mm) • Max internal grinding diameter: 31.5” (800.1mm) • Max tooth profile height: 3.15 ...
Linear drive + planetary gearbox, stroke 880, EGC-HD-220-880-TB-0H-GK, 556825 +.., Festo, mint condition Special price The current price of a similar product is € 5381 excluding VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Delivery consists of: 1) Festo toothed belt axis, liner drive, linear slide EGC-HD-220-880-TB-0H-GK, 556825, current market price € 4.424 Overall dimensions: 1470x380x120mm, 70kg, Slide length 220mm, stroke 1500mm, A blue front cover and a black round rear cover will be supplied at a later date. 2) Neugart planetary gearbox, PLE120-005-SSSB3AF-E19/40/95/115/B5/M8, 42635, Festo number 552197, gear ratio 5:1, cur ...
Linear actuator + planetary gearbox, stroke 1500, EGC-120-1500-TB-KF-0H-GV, 556815 +.., Festo, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Delivery consists of: 1) Festo toothed belt axis, liner drive, linear slide EGC-120-1500-TB-KF-0H-GV, 556815, Overall dimensions: 2050x290x120mm, 70kg, slide 300x70mm, stroke 1500mm, A blue cap at the front and a black round cover at the rear will be supplied later 2) Neugart planetary gearbox, PLE080-005-SSSB3AE-E19/40/95/115/B5/M8, 42631, Festo number 552195, transmission ratio 5:1, 6 months warranty We give you 6 months warranty for these goods from the date of invoi ...
Power: 211 kW - Ratio: 71:1 - RPM in/out: 1.485 / 20,9 - Shaft ø in: 70 mm. - Shaft ø out: 190 mm.
UNUSESD - Power: 75 kW - Voltage: 230 / 400V. - Amperage: 240 / 137A. - Hertz: 50 Hz. - Ratio: 8,26:1 - RPM in/out: 1.480/179 RPM - Shaft ø out: 110 mm - Weight: 887 / 952 KG
Precision planetary gearbox, i=8, PLFHP140-008-SSSE3AK-E38, Neugart, new Attention: This is an original product from Neugart and not a replica from Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. New! The part was purchased from a spare parts warehouse of a company, is in its original packaging, has never been used and is completely new. Drive side: Hollow shaft D 50mm, centering 180mm, pitch circle 215mm, z=4, 6 months warranty We give you a 6-month warranty for these goods from the date of invoice. In the event of a defect that is not the fault of the buyer, the goods can be returned. We will only refund the buyer the price of the product paid to us. Updating in the case of digital components is excluded. Liability for direct and indirect consequential damage is also excluded. Our terms and conditions apply, see our websit ...
maximum number of results exceeded
please refine your search
