127,856 used machines on RESALE, but how to find them? Machine Search
Key data: 3000 mm, 1500 mm, 4000 W
3000 x 1500mm / 4000w / MP FLEXIT Automatic loading & unloading
A package of twelve dyeing machines is available: 1) 2x Then AFT 225 dyeing machines, 2) Then AFS 50 dyeing machine, 3) Then AFE 50 dyeing machine, 4) 4x Then AFS 225 dyeing machines, 5) Fongs HST 130/32 dyeing machine, 6) Then DN 200 dyeing machine, 7) 2x Then OFHT 170 dyeing machines. An on-site inspection is possible.
length: 1000 x 600 x 300 mm table load: 300 kg total power requirement: 1,1 kW weight of the machine ca.: ca. 350 kg dimensions of the machine ca.: 1,30 x 1,00 x 2,65 m LACHNIT Tilting and Lifting Device Stainless steel column, welded steel container Container dimensions: 1000 x 600 x 300 mm Discharge height: 1.460 mm Control via push-button at column and pendant control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Height=1.3 m, Overall length= 0.8 m, Overall width= 1.86 m, Net weight= 204 kg,
Height=1.515 m, Overall length= 0.69 m, Overall width= 0.755 m, Net weight= 135 kg,
FOBA Laser FOBALAS 94S Nd:YAG Laser Marking System Marking Laser FOBALAS F 94S Laser Marking System Laser Type: FOBALAS 100 CW/QS - ND: YAG Performance class 4 P max = 120 W 1,064 μm XY/2-100 HPM Type: Foba Volts: 15 V Wavelength 1064 Hours: 43927 More items - new and used - can be found in our shop! International shipping costs on request!
FOBA DP 15 Marking Laser The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focusing of f=254 mm (254 mm focal length). This combination enables the permanent and sharp marking of materials such as metals and plastics by the "all-round laser". The 1064 nm wavelength is well absorbed by many materials, which can be used for annealing marking, color change, or material removal. Application: The fiber laser is a versatile "all-round laser" for marking industrial products. It is ideal for metals and a wide range of plastics. The technology enables permanent, legible and precise marking. Functionality: The laser beam creates a focused point of light that penetrates the material. Depending on the material and settings, various effects can be achieved, including: Annealing: A change in color of the material due to heating. Color cha ...
Size: 0x0 Equipments: Good condition without any damage 4 head paper drills
cutting diameter: 250 mm saw band length: 3660 mm cutting width: 1,3 mm clamping range: Länge 450 mm clamping range: Höhe 250 mm cutting speed: 20 - 70 m/min cutting capacity: stufenlos mitter cutting - all-position: 45 ° voltage: 380 V frequency: 50 Hz power capacity: 0,55 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,5 x 1,0 x 1,6 m coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pester PEWO-fold 1 Compact overwrapping machine for single cartons and carton collations in OPP-, PVC-, PE-materials, foil width from 90 mm to 230 mm, film thickness from 0.015 mm to 0.050 mm, maximum reell diameter 350 mm, reel core diameter 76 mm, size range min. 60 x 60 x 20 mm, max. 400 x 350 x 140 mm, carton infeed with turning star (turns the cartons by 90°), machine controlled using ELAU PacDrive C400, electrical connection 3x400V, V+N+PE/50Hz, power consumption 5.2 kW, current consumption 12.5 A, Operating pressure 4 bar, infeed/outfeed height approx. 900-950 mm, output infeed conveyor up to 150 cartons/min., output up to 60 cycles/collations per minute, machine floor space approx. 2970 x 1600 mm (LxW), machine height approx. 2150 mm, machine net weight approx. 1800 kg.
- CNC Crowning - Hydraulic tool clamping - EFL Easy form laser measuring & correction system - Set Tooling - Laser guide protection - Controlled axis Y1/Y2/X/R/V-Axis
- CNC Crowning - Hydraulic tool clamping - EFL Easy form laser measuring & correction system - Set Tooling - Laser guide protection - Controlled axis Y1/Y2/X/R/V-Axis
- Speeds 150 strokes - Hand ram adjustment 0 - 60 mm - Large tooling package ca 12 units - Wheeling tooling set (englisch wheel) - Vertical troath 250 mm - Horizontal Troath 400 mm
10 identical welding machines are available. Fuse protection: 32A, welding range: 40-350A, open circuit voltage: 18-43V, switch steps: 20, welding current at 100 percent duty cycle (40°C): 260A, length: 900mm, width: 560mm, height: 950mm, weight: 120kg. Standards: EN 60974-1 IEC 60974-1 international standard for arc welding equipment, protection class: IP23, protection against spray water and solid foreign objects smaller than 12mm, suitable for outdoor use, insulation class: H, cooling method: AF air cooling with fan, welding current range: 40A 16V to 350A 31.5V, open circuit voltage U₀: 18-43V, duty cycle at 350A: 50 percent duty cycle 5 minutes welding 5 minutes pause, at 330A: 60 percent duty cycle 6 minutes welding 4 minutes pause, at 260A: 100 percent duty cycle continuous operation possible, mains supply voltage: 3~400V 50Hz three phase, maximum mains current I₁ max: 25A, ef ...
Fastbind Elite XT Perfect binder with photo bushing device Fastbind FotoMount F42, machine number 77195122251, in good condition, immediately available Description: Technical performance of the machine: cycles/hour up to 450 Productivity: Books/hour up to 180 Min. / Max. thickness 0.1–50 mm Max. length 455 mm Max. envelope thickness 400 g/m² Voltage 220–240 V Machine dimensions (W/L/H): 1050 x 520 x 570 mm Weight 70 kg If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment
An FTH Fördertechnik bag palletizing system is available. Formation: 5-bag, palletizing capacity: approx. 1500 bags/h, pallet dimensions X/Y 1: 1200mm/800mm, pallet dimensions X/Y 2: 1200mm/1000mm, stacking pattern: variable, overall system dimensions X/Y: approx. 12600mm/5700mm. An on-site inspection is possible.
Height=2.01 m, Overall length= 0.76 m, Overall width= 0.78 m, Net weight= 190 kg,
gebr. Belt sander, Fabr. Format, Type BS 75 Built in 1999 Grinding width 75 mm with various abrasive belts
Height=1.47 m, Overall length= 1.5 m, Overall width= 1.75 m, Net weight= 40 kg,
different sets for an F 200 3 jaw chuck (base jaws on top jaws)
Bread Roll Press Fortuna Automatic A 3 H+ Dough dividing and rounding machine TOP model with effective shutdown Head cleaning to the back Dividing head with stainless steel knife NEW Dough insert up to 2400g Connection 400V, 16A-CEE connector Used machine overhauled with warranty Quality from a specialist company! Benefit from over 35 years of experience! Option: Platform or chassis Wirkteller Neu Service Package Maintenance contract E-Box Instruction & Commissioning
3D Printer Stratasys Fortus 380mc (2017) Ideal equipment for companies dedicated to prototyping, tooling manufacturing, and serial production of functional parts. Operating hours: 689 h (very low usage) Technology: FDM Build volume: 355 × 305 × 305 mm Licenses and compatible materials: Nylon 12, PC-ABS, SR110 soluble support Accessories: Cleaning station for SR110 soluble supports 20 build trays Recently renovated parts: pulleys, belts, fittings, guide tubes Drying station with full maintenance (summer 2025) High precision and reliability in industrial environments. Low cost per part for medium and large production runs.
BRUNO FOLCIERI TOP 800, Infeed Size 800x700 mm., Rotor length 800 mm., rotor Ø 530 mm., construction year 1998, 110 kW drive, n.3 rotating blades, n.2 still blades, complete with loading conveyor belt, metal detector, Soundproof case, installed power - used power in work: about 60-65% : 110 kW, availability: 3 weeks from confirmation for reconditioning, working width: 800 mm., conditions: recnditioned, type: heavy duty
Equipment consists out of: 1 - decoiler tower with 4 decoilers gt; capacity per decoiler: 3 ton
Power Pack generator power 60 A Table size (width × length) 350 mm × 600 mm Travel (X × Y × Z) 400 mm × 300 mm × 300 mm Control: CNC Incl. extinguishing system
H&C Fours ETG 250°C Max temperature: 250 °C Capacity: 2000 x 2000 x 2200 mm Power needed: 6.5 kW Voltage: 400V
H&C Fours 400°C 1000 x 1100 x 1000 mm Max temperature: 400°C
used Forstner slitting line, control left, 0-line right, with motorized cross shear, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run was carried out. Working width: 250 - 1250 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminium: 1.5 mm Colour: blue/yellow Total power requirement: 400 V Machine weight: 775 kg Dimensions: 1500 x 2200 x 1500 mm Coil weight: 2 t without straightening rollers Number of blades: 5 pairs Knife shaft diameter: 100 mm Speed: 25 m/min without bevel cut Coil width (max.): 1250 mm Maschinennummer/Machine number 102728 MST
Charmilles Form 20 Tabledimensions / T slots : 398,8 × 299,7 mm Tank dimensions: 208,2 L Longitidinal displacement X-axes: 300 mm Transversal displacement Y -axes: 200 mm Vertical displacement Z-axes: 250 mm Max weight on table: 350 kg
FOBA G5 Laser Engraving Machine LP100 with Swing Doors - With IMP-EMC Intelligent Mark Positioning for engraving systems (Camera for optical detection of the component position and alignment of the laser marking) - Jacket engraving unit - X/Y cross table round shaft guide - Deflection unit (TS10), mounted on the laser head, with standard lens (f=163 mm), Labeling field approx. 120 x 120 [mm] - Water/water cooler - Z-axis (with gearbox and servo drive), travel 500 mm - X/Y cross table round shaft guide Table top 250 x 250 [mm] with steel stop bracket, Travel distances 480 x 500 [mm], Max. load: 100 kg - - Servo axis control for all axes Operating System Windows XP Engraving Management Console (IMP-EMC) application software package Control panel with monitor, keyboard and mouse Design in laser protection class 1 Dimensions (W/H/D) 1100 / 2200 / 2200 [mm] ...
60 packs/min for 2x2 and 2x3 longneck, Vichy, and NRW bottles 40 packs/min for 2x3 swing-top bottles
Bread Roll Press Fortuna Automatic A 3 H+ Dough dividing and rounding machine TOP model with effective shutdown Head cleaning to the back Dividing head with stainless steel knife NEW Dough insert up to 2400g Dough divider with 3 new knitting plates Connection 400V, 16A-CEE plug Used machine overhauled with warranty Quality from a specialist company! Benefit from over 35 years of experience! Option: Platform or chassis Wirkteller Neu Service Package Maintenance contract E-Box Instruction & Commissioning
Piston-valve doser (as good as new) available at short notice. Flyer: - Capacity: 600 - 1200 filling processes/h - Filling volume: 30 – 500 ml - Suitable for liquid and absorbent products - 2 cylinders / 2 filling nozzles - Only pneumatics are required - 50l flow tank - Actuation with foot switch
Type: VHUVLG, Model: 190, 270976 km, gross vehicle weight 3500 kg, 830 kg payload, 1950 kg deadweight
Rötchenanlage: Kövy KM-S Year of Make: 2012 Head Machine Fortuna: Primus Pro V11.0 Year of Make: 2021 Kövy Dimensions: approx. 4900 × 1080 × 2530 mm Capacity: approx. 5,280 dough pieces /h Proofer capacity: 860 dough pieces Fortuna Hourly output: max.ca. 5,000 dough pieces /h Weight range: 40 -100 gr. Weight: approx. 1,100 kg Length of band top: 1,200 mm Length with strap: 1,705 mm Width: 1,000 mm Height: 1,520 mm Year of construction Fortuna: 2021 Year of construction Kövy: 2012
Edge banding machine Type: Tempora F 600 Manufacturer: Format-4 Year: 2021 Glued meters: 9000 In very good condition, under power Find more here - / Contact us at -
ABB IRB 2600 20/1.65 Foundry Plus IRC5 M2004 Robot Number of axes: 6 Max. load capacity: 20 kg Max. working range: 1650 mm Year of Make: 2012 Scope of delivery: Robot mechanics,Control cabinet,Teach panel,Connecting cables 2 weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Freely loaded / ex works.
Part Number: 7781 SPECIFICATIONS - Maximum milling height 216mm - Maximum milling depth 65mm - the largest cutter diameter is 250mm - spindle working length 500mm - spindle rotational speed 4600rpm - spindle diameter 40mm - max tool diameter 250mm - worktop length/width 890x400mm - 11kW motor - 2 material clamps – pneumatic - air demand 6-8 bar - diameter of the extraction port 160mm - dimensions l/w/h 1330x1200x1470mm - weight 970kg ADVANTAGES – Polish production – unpainted – used milling machine, very good condition Net price: 38900 PLN Net price: 9262 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)
Counting forklifts / compensating stackers Max. format: 500 x 340 mm, number of pages tabloid 96, broadsheet 48 Min. format: 148 x 105 mm, number of pages tabloid 4, broadsheet 4 Can handle single specimens (distance min. 10 mm) or scale current (distance min. 40 mm). Lateral offset max. 5 mm. Specimen thickness max. 6 mm / Flow height max. 10 mm Layer height max. 170 mm / Package height max. 350 mm Height inbound min. 500 / Height of infeed conveyor max. 1250 mm
1 JAMES HEAL type Wascator FOM 71 MP-Lab Standardised European Washing Machine, approved for IEC and ISO standarts, capacity 7 Kg, power consumption 5,4 KW, voltage 400V, 3N, 50 Hz, material stainless steel, dimensions 740x640x1080 mm, net weight 160 kg, made in Sweden. Machine is in an immaculate condition and looks like new.
Meat mincer grinder Completely made of stainless steel Dimensions: 415x705x930mm Electric power:1.8 kW Voltage: 220V/50Hz Capacity: 750 kg/h
Meat mincer grinder Completely made of stainless steel Dimensions: 460×520×860 mm Electric power: 1.8 kW Voltage: 220V / 50Hz Capacity: 750 kg/h
FOBA Vario RPD50 VS1109/048 - Windows XP English / German - 1.4GHz 512MB RAM - Fobagraf 441-01 - EMC / IMP camera - New IMP LED's - Radiator type P313 - 2013 – new filters - HF 40W - PK used, year of construction 2011, 1.3MB, 10.5 W under the lens - 420 lens, deflection unit Raylase SS 10 - Z - 170mm and X axis 300mm - Turntables in pendulum mode, - Start via footswitch, possible via light curtain - Internal / FOBA PLC - Bulkhead = max. component height 150mm - Completely cleaned / serviced 19% VAT is shown, EXW, Commissioning, instruction, training possible on request
General SKU305U624 LocationBarneveld MakeStarick Fördertechnik GmbH TypeLS3 / BAV1200 No.1821.2694.01.05 Year of construction2005 Pressure Working pressure1 Bar Main Features MaterialStainless steel Volume3000 Ltr. Pressure1 Bar Specified Features - Silo MaterialStainless steel 1.4301 (304) Silocheck Closedcheck Capacity3 m³ Diameter2000 mm Cylindrical height500 mm Conical height1310 Conical bottomcheck Dished topcheck ManholeDN300 InletDN200 Top connectionsDN600, DN500 Outlet with vibro bottomcheck 0,80 kW, 400Volt (EX) OutletDN200 Information Weightca. 500 kg CEcheck Total height4,42 m ATEX compatiblecheck Extra SpecificationsThis silo comes complete with dust filter and rotary valve. SilosStarick Fördertechnik GmbHTanks > SilosBrand > Starick Fördertechnik GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced pric ...
General SKU400W1243 LocationBarneveld MakeRousselet TypeEHBL 1053 DRGJ No.00313 Year of construction2002 Main Features MaterialStainless steel Motor30 KW Inlet diameter40 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity220 dm3 Basket sizesDia. 1050x680 mm Max. loading weight265 kg Motor30kW, 400/690V, 1480 rpm Max. basket speed1550 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitcheck InletDN40 Solids outletDN150 Liquid outletDN150 MaterialStainless steel 1.4435 (316L) Information Mounted on foundation platecheck With switchgearcheck Total height2,25 m Weight8365 kg ( total 14.000kg) Floorspace2,55x2,05 m Extra SpecificationsInside container, total dimensions 6,0x3,15 m, on steel frame total weight approx 14.000 kg Peeling centrifugesRousseletCentrifuges > Peeling centrifugesBrand > Rousselet What you can expect f ...
It is a used, reconditioned Fortuna bun press fully automatic for sale. The machine head can be swivelled electrically and switched off with active movement. Weight range of the machine is 40gr. - 110gr. per piece of dough (30 pieces). Incl. 3 x plates (more plates on request). Price on request.
: 400 mm weight: 1,3 t miter: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
