gear hobber machine used for sale

Geared motor with brake VEM Z1 BR 71.1/4 M301 0.25 kW 40 rpm 220 / 380 V IP44 Shaft diameter: Ø 24 mm Flange diameter: Ø 160 mm New !' Dimensions: 355 x 160 x 250 mm

Gear Motor HANNING ELEKTRO-WERKE 2B00682 G8A84 ( 2B00682G8A84 ) 0.18 / 0.25 kW 69 / 140 rpm 380 V shaft diameter: Ø 19 mm 2 speeds !' used, tested !' Dimensions: 315 x 210 x 150 mm

Gear Motor with Inverter and Brake SEW S67 DT80N4/BMG/MM07/MFP ( S67DT80N4 / BMG / MM07 / MFP ) < br /> MOVIMOT MM07C-503-00 0,0,0,0 15 / 0.75 kW 5.1 / 26 rpm 380 - 500 V IP54 shaft diameter: Ø 35 mm with control (MOVIMOT) ! used, tested ! Dimensions: 560 x 250 x 260 mm

Geared motor with brake BAUER BG10X-11/D09SA4W-TH/EKK008B4HA/C1-SP 0.37 kW 64 rpm 400 V IP65 shaft diameter: Ø 25 mm brake mounted !' used, tested !' Dimensions: 620 x 230 x 180 mm

Gear Motor, DC Gear Motor CARL CLOOS KG TGN 94-60 ( TGN94-60 ) Gearbox: Z5N 024140000 0,0,0 17 kW 142 rpm armature voltage: 31.5 V DC field voltage: 34.0 V DC shaft diameter: Ø 17 mm Flange diameter: Ø 80 mm used, tested ! Dimensions: 285 x 160 x 130 mm

Geared motor with brake VEM ZG2 BMREB 71 G 8-4 ( ZG2BMREB71G8-4 ) 0,0,0 22 / 0.4 kW 25 / 50 rpm 380 V 3AC IP44 shaft diameter: Ø 32 mm clutch with sprocket Ø 72 mm, 17 teeth spare part for Hohenstein RBT400 ! Two speeds! used, tested ! Dimensions: 620 x 210 x 250 mm

Gear Motor VEM ZG3/1 KMRA 63 G 4 ( ZG3/1KMRA63G4 ) 0,0,0 37 kW 8.0 rpm 220 / 380 V IP 44 shaft diameter: Ø 48 mm flange diameter: Ø 250 mm used, tested ! Dimensions: 680 x 290 x 245 mm

Geared motor with brake VEM ZG1 BMRZ 63 K4 ( ZG1BMRZ63K4 ) 0.25 kW 31.5 rpm 220 / 380 V IP44 shaft diameter: Ø 28 mm Flange diameter: Ø 160 mm used, tested ! Dimensions: 470 x 160 x 240 mm

Gear motor variable / adjustable with brake and slip hub GETRIEBEBAU NORD SK65SR15080L/4 0.74 kW 12 - 34 rpm (counted) adjustable by handwheel 220 / 380 V 3AC IP33 with right-angle gear SK65SVR150 used, tested ! Dimensions: 500 x 470 x 250 mm

Geared motor with brake SEW USOCOME R40DT63L 4B03 / HR ( R40DT63L4B03/HR ) 0.25 kW 74 rpm 220 / 400 V IP55 Shaft diameter: Ø 25 mm New ! Dimensions: 420 x 170 x 180 mm

Gear pump, Lubrication pump, single-flow, internally mounted ORSTA A 1.0/16 TGL 17-747401 V: 1.0 m3/h p: 1.6 Mpa ( 16 bar ) n: 1450 rpm Pk: 0.92 kW shaft: Ø 12 / 14 mm, length: 30 / 32 mm groove width: 4 mm pump base: 110 x 77 mm hole spacing: 92 / 55 mm hole diameter: Ø 6.5 mm used, tested ! Dimensions: 185 x 100 x 115 mm

Gear Pump, Hydraulic Pump REXROTH, BOSCH AZPF-11-008RAB1MG 0510 425 044 ( 0510425044 ) pressure: max. 280 barbar volume: 8 cm3/revolution speed: max. 400 rpm shaft diameter: Ø 18 mm wavelength: 30 mm groove width: 6 mm flange: Ø 80 / 125 x 90 mm hole spacing: 100 / 72.5 mm New ! Dimension: 127 x 90 x 125 mm

Wheel Pump, Hydraulic Pump MARZOCCHI 0,0,0 25 D 24 ( 0.25D24 ) 26 cm3 / U max. 190 - 230 bar max. 7000 rpm Shaft diameter: Ø 6 mm Shaft length: 16 mm Groove width: 2 mm Shaft threaded hole: M6 x 1.0, Length: 8 mm Flange: 80 x 50 mm hole spacing: 66 mm hole diameter: Ø 7 mm New ! Dimensions: 80 x 76 x 50 mm

Dial gauge for gears, tooth width measurement Feinmesszeugfabrik Suhl module 2 to 10 pitch 6 - 32 mm in wooden box used, tested ! Dimensions: 200 x 165 x 70 mm

Dial gauge for gears, tooth width measurement Feinmesszeugfabrik Suhl module 1 to 2 S6 in wooden box used, tested ! Dimensions: 140 x 175 x 35 mm

Gear pump with tank on wheels PAGUS motor: 1,1,000 5 kW 1400 rpm 220 / 420 V with Mahle Filter P1 1844-20-28-NBR Tank approx. 60 l Dimensions 610 x 440 x 820 mm

Gear Pump, Transfer Pump with Motor and Filter WMW, ORSTA A20-25-63 VS Pump: AC 1,6 TGL 17-747407 Qmax: 1.6 l/min pmax: 6.3 bar engine: Type 1260.1/1 0.06 kW 1400 rpm 220 / 380 V used, tested ! Dimensions: 460 x 250 x 170 mm

Resolver with measuring gear, rotary detector VEM 1969.1 mikroma TS3C2 i = 1 : 5 shaft: Ø 10 mm flange: Ø 56 / 70 mm used, tested ! Dimensions: 160 x 130 x 110 mm

Trapezoidal lead screw with screw jack NEFF MULI 1 lifting capacity 5 kN stroke: 150 mm spindle: Ø 18 mm hole spacing: 60 / 51.5 mm 4x threaded hole: M8 x 1.25, depth: 18 mm used, tested ! Dimensions: 320 x 100 x 85 mm

Trapezoidal lead screw with screw jack NEFF MULI 1 M1-N-H-TGS-0250-G Lifting capacity 5 kN stroke: 250 mm Spindle: Ø 18 mm used, tested ! Dimensions: 440 x 105 x 85 mm

Trapezoidal lead screw with screw jack NEFF MULI 1 M1-N-H-TGS-0250-G Lifting capacity 5 kN stroke: 250 mm Spindle: Ø 18 mm used, tested ! Dimensions: 440 x 105 x 85 mm

Bode welding crane

Oil-bath gearbox IMA Type: 04.015

Glue application with gearbox Make: IMA - glue application 04.088 - gearbox 04.156

It is a new gear kneading tool - spiral for Boku spiral mixer SK 240 A for sale. Price on request.

Due to new motorization in the rotating state from a dry cargo ship removed

Seven gearboxes are available. 1) Jahnel-Kestermann, Getriebewerke Bochum GmbH, type: 027.5-AW36/FG, power: 40kW. 2) Polysius GmbH, Neubeckum, year of manufacture: 1956, type: 027.5 / AW36, power: 33hp, speeds: 542/14.5. 3) Polysius GmbH, Neubeckum, year of manufacture: 1964, type: GR36, power: 35hp, speeds: 555/15. 4) TGW Thyssen Getriebe und Kupplungswerke GmbH, type: KS 1.5, year of manufacture: 1990, power: PN 5.7kW. 5) WGW Westdeutsche Getriebewerke GmbH, type: N 6.7, characteristic values: n/n1 14-50/12.5, KB 2.5. 6) WGW Westdeutsche Getriebewerke GmbH, power: 45hp, characteristic values: n/n1 315/15, KBU 1245ISO. 7) Polysius GmbH, Neubeckum, year of manufacture: 1953, type: 027.5 / AW36, power: 42/34 hp, speeds: 600/16, 135/13. On-site inspection is possible.

Used vacuum filler HANDTMANN, type: VF 50 -completely overhauled- For filling, portioning and twisting. - All wear parts renewed - Oil in the vacuum pump and the hydraulics NEW - Incl. twisting gear - Computer control - Up to 300 portions per minute - Technically very good condition - 6 months warranty Capacity: max. 2,400 kg/h Filling pressure: max. 55 bar Portioning range: 5 - 100,000 g Hopper capacity: 40 / 80 l Visits and test runs are possible by arrangement.

Stock number: PT1067, Gear pump, stainless acid proof steel,, ECO type GM4-KCT-KKS., 0,25 kW motor, 910 rpm.,, 220/380 volt., Ø 1/2 connections,, theoretical capacity 400 l/h., Material: Stainless acid proof steel AISI 316

Milling axes, dividers, grinding wheels, High: 1765 mm, Tall: 1765 mm, Weight: 2500 Kg, Width: 1100 mm, Long: 2570 mm, Ø tool: 250 mm, Total power: 7.5 kva., Ø of the grinding wheel: 250 mm, Travel of table: 400 mm, Height of points: 125 mm, Height of centers: 125 mm, Max. Ø to be sharpened: 250 mm, Power wheel motor: 3 Kv., Manufacturing number: 1905.04, Ø max to sharpen: 250 mm, Grinding wheel motor power: 3 Kv., Distance between points: 635 mm, Table tour: 400 mm, Revolutions of the wheel: 1750/2150/2850 mm, Length between points: 635 mm, Maximum length to sharpen: 400 mm, Revolutions of the grinding wheel: 1750 / 2150 / 2850 mm, Radial travel axis wheelhead: +35 / -65 mm, Maximum length to be sharpened: 400 mm, Vertical travel of the wheel: 175 mm, Vertical travel of the grinding wheel: 175 mm, Radial travel of the grinding wheel shaft: +35 / -65 mm, Cone holder shaft clamping pi ...

Stock# U2457-3 Used stainless steel horizontal screw conveyer by Van Beek BV (NL) type "U", model TR300. Width of the gutter 315 mm. Screw has diameter 300 mm, lead of the screw 270 mm, total length of the screw 290 cm. Conveyer has two inlets, each with diameter 298 mm and rotary magnetic separator by Goudsmit Magnetic Systems (NL). Each separator is driven by el motor and reducer 0.18 kW, 1320/21 rpm, 220-240/380-415 V, 50 Hz. Spacing between center axis of each inlet is 145 cm. Conveyer has also two rectangular discharge outlets, each with dimensions: 240 mm x 250 mm. Spacing between centers of discharge outlets - 250 cm. Screw is driven via reducer and el motor 2.2 kW, 220-240/380-415 V, 50 Hz. Working rotation of screw up to 64 rpm. Last time machine had been working in food industry as a collector of powdered products from two vibrating screens.

Hydraulically switchable gearbox for change of direction of rotationHydraulic reverse gear of latheYear of construction approx. 1985Alternating gearbox for fast change of direction of rotationClockwise or counterclockwise rotation- electric hydraulic pump for hydraulic pressure generation (380 volts, 0.25kW)- 2 pieces of solenoid valves for switching from left to clockwise rotation- equipped with pulleys 230 and 200 mm- was driven by a 15 KW drive motor, fast change of direction of rotation with high torque transmission- Drive motor always runs on the right, gearbox is hydraulically activated

Column drilling machine GOTHABear power 30 mmSpindle holder MK 3 - long quill, throat depth 350 mmPine stroke 200 mmTable size 460 mmSpindle speed 160 - 750 rpm. 4 stepsFeed rate 0.1 - 0.2 - 0.3 mm/COLUMN diameter 160 mmMotor power 2.2 kWNerg connection 380 volts, 50 Hz- Spindle speed via 4 gear stages- Automatic feed- Rotatable drilling table with mechanical clamping- Table height adjustment via hand crank- Clamping surface at the machine foot 450 x 450 mmSpace required L x W x H 700

Column drill INFRATIREA - ORADEA type PH - 031Series. No. 02434 Year of construction 1975Drilling capacity 40 mmSpindle holder MK 4 - short quillThroat depth 320 mmQuill stroke 250 mmTable size 400 x 400 mmColumn diameter 160 mmSpindle speed 85 - 1500 rpm. 6 gear stagesMotor power 2.2 kWNet connection 400 volts, 50 Hz- Spindle speed via 6 gear stages- Clockwise and counterclockwise rotation- Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/U- Drilling table swivelling- Table height adjustment via

1 of used gearbox, Lenze type 52.162.06.000, ratio I=15,53. Overhauled with new bearings, seals, oil, silent block and spider.

1 of used gearbox, Lenze type 52.162.06.00, ratio I=10. New 1994. Overhauled with new bearings, seals and oil.

1 of used gearbox, Lenze type 52.110.10.14, ratio i=15. Example pictures only. Various mounting bracket versions available. Enquire for details.

1 of used gearbox, Lenze type GKS04-3 N HBR 1C, i=16,087. Overhauled and fitted with new seals (except output side) and oil (CLP 460).

1 of used gearbox, Lenze type 12.602.12.6.4, ratio i=6.3. Can also be supplied in overhauled condition. Enquire for details.

1 of used gearbox, make Lenze, type GKS04-2 N HBR, 0804, A 000, 81 NM, 171,2 r/min, CLP 460, i = 8,178.

A small geared drilling machine Knuth is available. Drilling capacity steel: 25mm, thread cutting steel: M10-M12, spindle taper: MT3, speed: 2900rpm, quill stroke: 400mm, arm reach: 250mm, table dimensions X/Y: 270mm/300mm. Machine dimensions X/Y/Z: approx. 600mm/600mm/1200mm, weight: approx. 200kg. An on-site inspection is possible.

Right-angle gears, as good as new

Right-angle gears, as good as new

Cleanable transport screw Brand: van Beek (The Netherlands) YOM: 2016 Screw length: 1550mm Screw dia: 310mm The screw can easily be extended to clean. Dimensions ready for use: LxWxH 2800mm x1300mmx1150mm Dimensions ready to clean (extended) LxWxH 4250mm x1300mm x 1150mm Condition: very good Video's available.

Lifting capacity: 52t, drive shaft diameter of the hollow shaft: 245mm, brake shaft dimensions: 100x190mm, drive shaft dimensions: 80x140mm, ambient temperature: -15 to 45°C, center distance: 1105mm, rated power: 275kW. The gear is still unused. An on-site inspection is possible.

Geared motor SWE TYPE: R43DT71D2BMG Number:1046485101003996 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg20,21, Qty 1x

TYPE: R43DT71D2BMG Number:1046485101000796 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg 20,21, quantity 1x