gear hob used for sale

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 54 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Brake -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Weight: 19.5 kg

max. wheel diameter: 400 mm gear width: NA mm max. module: 5 min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Manual Two Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SEW Eurodrive Type SA67 DT90L-4 ZFISITI 3 chamfer 400 volts 1.5 kW 26 RPM Shaft 40 mm L 52.00cm W 25.00cm H 25.00cm

Gear motor, electric motor -Speed: 32 rpm -Power: 0.55 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Brake -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 30 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 9 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 410/190/H155 mm -Weight: 16 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 165 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 21 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 57 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 44 -Brake: 220 V -Number: 9x motor available -Price: per piece -Weight: 14 kg

max. wheel diameter: NA mm gear width: NA mm max. module: min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Manually operated 2-Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 41 rpm -Power: 0.25 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 490/200/H170 mm -Weight: 20 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 73 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Brake -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Weight: 18.5 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 21/41 rpm -Power: 0.88/1.3 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 660/230/H300 mm -Weight: 59 kg

max. wheel diameter: 400 mm gear width: 75 mm max. module: 0,5 min. module: 60 total power requirement: 25 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 ______________________________________________________________________ ___________ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12 ...

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 35 rpm -Power: 0.25 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 490/200/H170 mm -Weight: 19 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 123 rpm -Power: 2.2 kW -Design: B3 -Shaft diameter: Ø 35 mm -Protection class: IP 33 -Number: 1x motor available -Dimensions: 640/290/H300 mm -Weight: 76 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 150 rpm -Power: 1.5 kW -Construction: B3 -Diameter shaft: 50 mm -Protection class: IP 33 -Dimensions: 660/260/H300 mm -Weight: 74 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 100 rpm -Power: 1.5 kW -Construction: B5 -Diameter shaft: 48 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 600/297/H400 mm -Weight: 63 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 19.5 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 520/230/H240 mm -Weight: 27.7 kg

Used vacuum filler HANDTMANN, type: VF 50 -completely overhauled- For filling, portioning and twisting. - All wear parts renewed - Oil in the vacuum pump and the hydraulics NEW - Incl. twisting gear - Computer control - Up to 300 portions per minute - Technically very good condition - 6 months warranty Capacity: max. 2,400 kg/h Filling pressure: max. 55 bar Portioning range: 5 - 100,000 g Hopper capacity: 40 / 80 l Visits and test runs are possible by arrangement.

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 51 rpm -Power: 0.25 kW -Design: B14 angle -Shaft diameter: 25 mm -Protection class: IP 44 -Dimensions: 580/250/H200 mm -Weight: 35 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 8.3 rpm -Power: 0.25 kW -Diameter shaft: Ø 40 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 700/210/H300 mm -Weight: 41 kg

Stock number: 3984 GEAR MILLING MACHINE Manufacturer: STAEHELY, Type: SHA 506 Machines NO.: 10442, Year of manufacture: 0 Specifications: Module 6 Table size 300 mm Ø Spindle speeds 100-500 rpm Accessories: Zuadds gear Operating instructions Length: 2200 mm, Height: 2000 mm, Width: 1300 mm, Weight: 4860 kg

DC motor, servo motor, gear motor, electric motor, direct current, gear motor -Speed: 40 rpm -Power: 0.19 kW -Construction: angle -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Number: 2x motors available -Price: per piece -Dimensions: 310/150/H160 mm -Weight: 10 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Output: Even speed 1420 rpm -Diameter shaft: Ø 18 mm -Output: Angle speed 32 rpm -Diameter shaft: Ø 32 mm -Power: 1.5 kW -Construction: B5 -Protection class: IP 44 -Dimensions: 620/260/H350 mm -Weight: 51 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 50 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 55 -Dimensions: 450/230/H180 mm -Weight: 18 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 4 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 60 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 800/300/H350 mm -Weight: 68 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Transfer in current condition as seen -Speed: 20/63 rpm -Power: 0.5/0.9 kW -Construction: B3 -Shaft diameter: Ø 35 mm -Protection class: IP 44 -Dimensions: 680/195/H320 mm -Weight: 53 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Power: 0.6/0.9 kW -Speed: 10/20 rpm -Design: B3 -Shaft diameter: 40 mm -Protection class: IP 44 -Speed: 740/1420 rpm -Dimensions: 660/280/H300 mm -Weight: 61 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 146 rpm -Power: 3.0 kW -Construction: B3 -Diameter shaft: Ø 45 mm -Protection class: IP 33 -Dimensions: 630/260/H300 mm -Weight: 75 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 33 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Dimensions: 450/210/H200 mm -Weight: 21.2 kg

Hydraulically switchable gearbox for change of direction of rotationHydraulic reverse gear of latheYear of construction approx. 1985Alternating gearbox for fast change of direction of rotationClockwise or counterclockwise rotation- electric hydraulic pump for hydraulic pressure generation (380 volts, 0.25kW)- 2 pieces of solenoid valves for switching from left to clockwise rotation- equipped with pulleys 230 and 200 mm- was driven by a 15 KW drive motor, fast change of direction of rotation with high torque transmission- Drive motor always runs on the right, gearbox is hydraulically activated

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 83 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -with: electrical separation coupling -Dimensions: 530/160/H230 mm -Weight: 23 kg

Column drilling machine GOTHABear power 30 mmSpindle holder MK 3 - long quill, throat depth 350 mmPine stroke 200 mmTable size 460 mmSpindle speed 160 - 750 rpm. 4 stepsFeed rate 0.1 - 0.2 - 0.3 mm/COLUMN diameter 160 mmMotor power 2.2 kWNerg connection 380 volts, 50 Hz- Spindle speed via 4 gear stages- Automatic feed- Rotatable drilling table with mechanical clamping- Table height adjustment via hand crank- Clamping surface at the machine foot 450 x 450 mmSpace required L x W x H 700

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 103/420 rpm -Power: 0.36/1.4 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 65 -Brake -Number: 1x motors available -Price: per piece -Dimensions: 580/320/H220 mm -Weight: 42 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 57 rpm -Power: 1.5 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Brake -Dimensions: 640/240/H230 mm -Weight: 41 kg

Column drill INFRATIREA - ORADEA type PH - 031Series. No. 02434 Year of construction 1975Drilling capacity 40 mmSpindle holder MK 4 - short quillThroat depth 320 mmQuill stroke 250 mmTable size 400 x 400 mmColumn diameter 160 mmSpindle speed 85 - 1500 rpm. 6 gear stagesMotor power 2.2 kWNet connection 400 volts, 50 Hz- Spindle speed via 6 gear stages- Clockwise and counterclockwise rotation- Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/U- Drilling table swivelling- Table height adjustment via

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 56 rpm -Power: 1.5 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 600/250/H300 mm -Weight: 62 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 36/4 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: 28 mm -Protection class: IP 44 -Brake: 24 V -Dimensions: 570/310/H280 mm -Weight: 55 kg

A small geared drilling machine Knuth is available. Drilling capacity steel: 25mm, thread cutting steel: M10-M12, spindle taper: MT3, speed: 2900rpm, quill stroke: 400mm, arm reach: 250mm, table dimensions X/Y: 270mm/300mm. Machine dimensions X/Y/Z: approx. 600mm/600mm/1200mm, weight: approx. 200kg. An on-site inspection is possible.

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 0.8 rpm -Power: 0.12 kW -Construction: B3 -Shaft diameter: Ø 75 mm -Protection class: IP 54 -Dimensions: 830/390/H440 mm -Weight: 69 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 154 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: 50 mm -Number: 1x motors available -Price: per piece -Dimensions: 590/250/H310 mm -Weight: 57 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 122 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: 50 mm -Number: 3x motors available -Price: per piece -Dimensions: 590/250/H310 mm -Weight: 63 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 12 rpm -Power: 0.25 kW -Hollow shaft diameter: Ø 25 mm -Design: Hollow shaft angle -Protection class: IP 44 -Brake -Dimensions: 450/195/H190 mm -Weight: 23.2 kg

Gear motor, electric motor, electric gear motor, gear motor for stop, three-phase motor -Speed: 32/196 rpm -Power: 0.16/1.0 kW -Construction: B5 angle -Diameter shaft: 35 mm -Protection class: IP 54 -Dimensions: 560/310/H180 mm -Weight: 46 kg

Gear motor, electric motor, electric gear motor -Speed: 19.5 rpm -Power: 0.25 kW -Diameter shaft: Ø 25 mm -Construction: B5 -Price: per piece -Number: 1x available -Protection class: IP 44 -Dimensions: 390/170/H190 mm -Weight: 16 kg

Cleanable transport screw Brand: van Beek (The Netherlands) YOM: 2016 Screw length: 1550mm Screw dia: 310mm The screw can easily be extended to clean. Dimensions ready for use: LxWxH 2800mm x1300mmx1150mm Dimensions ready to clean (extended) LxWxH 4250mm x1300mm x 1150mm Condition: very good Video's available.

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 223 rpm -Power: 2.2 kW -Construction: B5 -Diameter shaft: O 30 mm -Protection class: IP 33 -Price per piece -Quantity: 2 pieces available -Dimensions: 600/270 / H250 mm -Weight: 41 kgpc.

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 256 rpm -Power: 0.55kW -Construction: B3 -Diameter shaft: 25 mm - Degree of protection: IP 33 -Number: 1x available -Dimensions: 405/200/H210 mm -Weight: 22kg

Key data: 630 mm, 8

Max. outer diameter (gear): 630 mm Max. inner diameter (gear): approx. 750 mm Max. tooth width: 180–200 mm Max. module: 8 Shock stroke: up to 220 mm Stroke rate: 47–300 strokes/min Tool holder: MK 4 Drive power: approx. 8 kW Total connected load: approx. 10–12 kW Njbmsww Er Hompw Spjwk Machine weight: approx. 5,500–5,800

Gear testing machine REISHAUER AM

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 16/31.5 rpm -Power: 0.9/1.5 kW -Construction: B3 -Diameter shaft: 50 mm -Protection class: IP 44 -Brake -external fan -Dimensions: 750/300/H360 mm -Weight: 78 kg