gear hob used for sale

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Work capacity:max. diameter: 45 mm max. module: 1.00 max. gear wheel width: 45 mm Pitch min.: 6 max.: 180 Milling cutter speeds: number (steps): 8 from: 900 rpm up to: 4000 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.50 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 600 mm Width: 500 mm Height: 1300 mm Various accessories: Coolant system Dividing plates

Diameter: 0 mm CNC Brand: 0 CNC Model: 0 Control: SYNTEC 200TB (NEW 2019) Technical data Working range: Module from: 1 up to: 5 Max. wheel diameter: 250 mm Max. gear cutting width: 70 mm Table diameter: 320 mm Drill diameter of the table: 125 mm Max. ram stroke: 100 mm Distance ram to table: from: 190 mm up to: 290 mm Taper in ram: 40 ISO Ram stroke speeds: from: 100 s/min up to: 1200 s/min Voltage 50 Hz 3x: 380 Volt Drive: 36 kW Machine´s weight about: 10000 kg Overall dimensions machine: Length: 4500 mm Width: 3200 mm Height: 2900 mm Equipment: Retrofited control: 2019 Helical gearing Mise en conformité CE

Gear motor Erag AG SKF 0.25 kW 1390 rpm Reduction ratio 1 : 80 Output speed 17 rpm The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Gear motor Lenze Gear ratio 1:20.044 Power 1.5 kW Engine speed 3450 rpm The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

MAX DIAMETER 800,MAX MODULE 14

MAX DIAMETER 750,MAX MODULE 10

MAX DIAMETER 800.MAX MODUL 10 , MAX STROCE 200

one fixed unit and one movable unit (X-travel: 3000 mm) both units have manuals clamps variable turning speed center height: 1000 mm max swing of workpiece: 2000 mm cap with both units: 6000 kg cap with one unit: 3000 kg

MAX DIAMETER 320 MAX MODUL 6

MAX DIAMETER 320 MAX MODUL 8

Technical data Max. diameter: 36 mm Max. module: 1 Max. gear width: 50 mm Pitch min.: 6 max.: 200 Speeds: number (steps): 8 from: 660 rpm up to: 5300 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 445 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1400 mm Various accessories: Loading attachment: W 25

Technical data Max. diameter: 36 mm Max. module: 1 Max. gear width: 50 mm Pitch min.: 6 max.: 200 Speeds: number (steps): 8 from: 660 rpm up to: 5300 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 445 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1400 mm Various accessories: Loading attachment: W 25

Technical data Max. diameter: 36 mm Max. module: 1 Max. gear width: 50 mm Pitch min.: 6 max.: 200 Speeds: number (steps): 8 from: 660 rpm up to: 5300 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 445 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1400 mm Various accessories: Loading attachment: W 25

Technical data Max. diameter: 40 mm Axial distance from work-piece to tool: min.: 16 mm max: 30 mm Speeds: number (steps): 4 from: 800 rpm up to: 3200 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.58 kW Machine´s weight about: 400 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1300 mm Various accessories: Loading attachment: W 19

Technical data Max. diameter: 40 mm Axial distance from work-piece to tool: min.: 16 mm max: 30 mm Speeds: number (steps): 4 from: 800 rpm up to: 3200 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.58 kW Machine´s weight about: 400 kg Overall dimensions machine: Length: 800 mm Width: 800 mm Height: 1300 mm

Diameter: 400 mm Klingelnberg - AFK 151 Spiral bevel gear cuting machine Ø 400 x Mod 6 MACH - ID 6237 Make: Klingelnberg Type: AFK 151 YOP: 1960 Max. Diameter   400 Ø Modu    l6 mm Dimensions Length    3.000 mm Width      2.200 mm Height     2.000 mm Weight     6.900 kg

Diameter: 500 mm Module: 6 mm Axial travel: 0 mm MACH-id    5215 MAKE        TOS CZ TYPE          OHO 50 YOP SPECIFICATIONS External workpiece Ø Max. 500 Ø  Max. Modul Max.     6 Weight approx.     100 Kg Max. Workpiece height      125 mm Speeds / ranges      355 Rpm Power      4 kW DIMENSIONS Length       2000 mm Width        1000 mm Height      2000 mm

Self-aligning rotators capacity driven unit: 60 ton capacity non-driven unit: 60 ton minimum diameter of workpiece: 500 mm maximum diameter of workpiece: 5500 mm roller dia: 559 mm roller width: 127 mm WELDINGMANIPULATOR FOR CYLINDRES: yes Max weight on both supports: 120 ton Coating material on wheels: rubber Length: 3100 mm Width: 1100 mm Height: 2530 mm

Self-aligning rotators capacity driven unit: 20 ton capacity non-driven unit: 20 ton minimum diameter of workpiece: 450 mm maximum diameter of workpiece: 4600 mm roller dia: 381 mm roller width: 76 mm WELDINGMANIPULATOR FOR CYLINDRES: yes Max weight on both supports: 40 ton Coating material on wheels: rubber Length: 2884 mm Width: 840 mm Height: 2010 mm

Self-aligning rotators capacity driven unit: 20 ton capacity non-driven unit: 20 ton minimum diameter of workpiece: 450 mm maximum diameter of workpiece: 4600 mm roller dia: 381 mm roller width: 76 mm WELDINGMANIPULATOR FOR CYLINDRES: yes Max weight on both supports: 40 ton Coating material on wheels: rubber Length: 2884 mm Width: 830 mm Height: 2010 mm

External gears workpiece diameter, max.: 130 mm Gear width: 25 mm Module, max.: 4 mm Control: SINUMERIK 840 D Spindle rotational speed: 0 - 30 U/min Helix angle: +/- 45 ? Radial slide travel X: 230 mm Y-axis (column - cross): +/- 25 mm Stroke length max.: 30 mm table turning speeds: 0 - 1000 U/min ram strokes 500 - 2500 Hub/min total power requirement 49 kW Machine Weight: 11500 Kg Required space (W x D x H) mm: 6400 x 4500 x 4400

External gears workpiece diameter, max.: 130 mm Gear width: 25 mm Module, max.: 4 mm Control: SINUMERIK 840 D Spindle rotational speed: 0 - 30 U/min Helix angle: +/- 45 ? Radial slide travel X: 230 mm Y-axis (column - cross): +/- 25 mm Stroke length max.: 30 mm table turning speeds: 0 - 1000 U/min ram strokes 500 - 2500 Hub/min total power requirement 49 kW Machine Weight: 11500 Kg Required space (W x D x H) mm: 6400 x 4500 x 4401

Rotary gearbox Handtmann 34-4, new bearings, sealing rings and belts, used, good condition

Bevel gear motor, G50BB124MHAR2C, 401r/min, 68Nm, Lenze, mint condition If you have a VAT number, we will gladly issue an invoice without VAT. As good as new! The part was disassembled from a new unit that was not put into operation. - Bevel gear motor G50BB124MHAR2C, 401r/min, 68Nm, I=3,565 - Motor MDEMABS100 32C0C, 0,55KW, 1430r/min, - Bore for shaft D30mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Gear motor SEW Through hollow shaft 50 mm Motor 1.5 kW Reduction 94.93:1 Output speed 15 rpm In good condition, ready for use Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Very good condition, with change gears and accessories, new belts, new diamond dressers, preparation for oil filtration new.

Gear slotting 5140, Russia production, with change gears

1 set, 3 Sück servomotors for the spindle speeds. Weight: approx. 6 kg. Shipping with DHL possible by arrangement. The motors are from an NC tool milling machine, Fabikat: MAHO, Type: MH 600 P and have 100% until expansion. functioned. The parts can be viewed in consultation and are immediately available.

90° angular gearbox from Kumera Norgear, model KV1V-DB 450kW Input 1422 Ratio 2.4:1 ~700kg With all standard attachments

Sell Perkins engine with torque converter gearbox Engine type LD20170 Torque converter transmission Voith Type 843K Price VB

GEAR NOISE TESTER Make : HURTH Model : ZP320 B THE MACHINE IS IN EXCELLENT CONDITIONS AND COMPLETE IN ALL ITS PARTS

Gear motor SEW-Eurodrive KA86 DT100LS-4 -Gear motor -Manufacturer : SEW- Eurodrive -Type:KA86 DT100LS-4 -RPM 1400 / 19 -for more details see picture with nameplate

Helical geared motor / motor Manufacturer: SEW-USOCOME Type: RF57 DT90L4 Quantity in stock: 2 Turnover y/min : 1410/95 Transmission: 15 Power (kW): 1.5 Product Id: 1

Key data: 1 , 95

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF57 DT90L4 Ilość w magazynie: 2 Obroty r/min : 1410/95 Przekładnia: 15 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

No. 4700: 1 gebr. Flat gear motor / gear motor n 155 min-1 / max. 2454 Nm / i = 9.39 / hollow shaft Fabr., NORD / Getriebebau NORD, Type SK 6282 AZ - 180 M / 4 TF H2 Weight approx. 350 kg Drive power: 18.5 kW

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF57 DT90L4 Ilość w magazynie: 4 Obroty r/min : 1410/25 Przekładnia: 56 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF67 DT90L4 Ilość w magazynie: 3 Obroty r/min : 1410/79 Przekładnia: 18 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

mechanical turning and tilting Capacity: 15 ton

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF67 DT90L4 Ilość w magazynie: 2 Obroty r/min : 1410/60 Przekładnia: 24 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF67 DT90L4 Ilość w magazynie: 2 Obroty r/min : 1410/35 Przekładnia: 40 Moc (kW): 1,5 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

Używany Motoreduktor walcowy / silnik do remontu. Producent: SEW-USOCOME Typ: RF67 DT90L4 Ilość w magazynie: 2 Obroty r/min : 1380/9,5 Przekładnia: 145 Moc (kW): 0,75 Dodatkowo na magazynie mamy dostępne inne motoreduktory walcowe i stożkowe. Zapraszamy do współpracy.

Santasolo Gearbox Part No.: 2KC110 The spare part is in good condition nevertheless, this is a used items, which has or may show signs of wear.

Gear pump Axial Piston Pump Overhauled by the manufacturer + conserved Manufacturer: Rexroth Type: A11VO60EP2G / 10R-NPC12N00H-S Further details and scope of delivery can be found in the Photographs. Grey and red lacquered available. Color may therefore differ from the images. for more information see pictures.

Gear pump Axial Piston Pump NEW/NEW Manufacturer: Rexroth Type: A11VO95DRG / 10R-NSD12K02 Further details and scope of delivery can be found in the Photographs.

Coming for sale : Peacock P1200 S , 2002 Under power If interested please contact

Digital height measuring and marking device with double column and handwheel adjustment Resolution 0.01 mm / 0.0005 inch 0 - 600mm Carbide tear tip The device comes from my private property, was used for private purposes. It is in a very good little-used condition. Original price today 605,00Euro net

Gearboxes, spur gear units used HANSEN Type: D753CT Translation i: 453 Shafts approx. Ø 38 / 150 mm Dimensions: approx. 1750 x 900 x 800 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

2 STATIONS BRONSHING (RAEUMMASCHINE) Year of construction 2001 great condition

Gearboxes, spur gear units used HANSEN Type: D743CT3 Translation i: 203 Shafts approx. Ø 50 / 150 mm Dimensions: approx. 1750 x 900 x 800 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Planetary gear alpha, SP 140S-MF1-7-4G1-2S, I=7, Wittenstein, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. - Shaft D32mm, - centering D130mm - Output side for shaft D24mm - I=7 Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.