gear grinding used for sale

In various sizes and designs including 125mm, 230mm and 350mm, Including for metal and stainless steel, Complete with metal display 63 x 48 x 208cm Auction-ID: A1-46604-95

Magnet dimensions: 600 x 250 mm Grinding wheel diameter: approx. 220 mm Auction-ID: A7-46287-166

Serial Number: 011.045.90.074 Distance between spikes: 1,000 / 1,600 mm Tip height: 175 / 225 mm Maximum workpiece weight: 130 kg (between spikes) Grinding Wheel Head: Swivel turret for exterior, interior and end grinding Axis B: Automatic swivel with 0.0001° resolution Control System: Fanuc 16i-T / 18i-T with Studer Pictogramming Auction-ID: A1-46647-13

consisting of a flexible grinding shaft of a hand-held satin finishing machine, manufacturer FANZWORK, type: FZ-7301B, year of construction: 2023 plus various abrasives 4 pneumatic grinders with accessories Reference: Schiller - Lot 21 Dimensions: 1000mmx800mmx300mm Weight: approx. 25kg Auction-ID: A7-46763-192

Manufacturing number: 75-8771 Max. grinding wheel diameter: approx. 250 mm Max. sanding belt width: approx. 40 mm Auction-ID: A7-46287-11

Serial number: F8133 Grinding wheel diameter: approx. 90 mm Reference: Schmidt - Lot 95 Auction-ID: A7-46763-90

Serial number: 13114001 Operating voltage: 400 V Connection: 1.5/2.2 kW Rated current: 3.5 / 5.0 A Speed: 1450/2900 rpm Grinding wheel diameter: approx. 200 mm Reference: Veatec - Lot 29 Auction-ID: A7-46763-259

Including approximately 2075x grinding disc 125x1.6x22.23mm Extreme and 170 various sanding discs Nylon 135x22.2mm Soft and Hard Auction-ID: A1-46604-118

In various versions including A30-36 RXBF Combi Extra, A 60 Alu, A24-30-36 QXBF Inox,.. 25 or 50 pieces /per pack Auction-ID: A1-46604-108

In various types including mainly Turbotwister-HP A-36QXBF and Turbotwister A-100 QBF, complete with 1 pack of Globe CD 180x22mm Turbotwister-HP A-36QBF, packed per 25/box Auction-ID: A1-46604-111

Including dia 178mm, 125mm, 230mm, 100mm, in various designs, including some boxes addressed Auction-ID: A1-46604-122

Connection: 230V, Power: 2.2kW Auction-ID: A1-46805-60242

Including 200 pieces 125x2.5x22.23mm, 1000 pieces 125x1.2x22.23mm and 75 pieces 230x2.0x22.23mm and 100 pieces 230x2.5x22.23mm Auction-ID: A1-46604-119

Working range 2-13 mm, collets ER20/12, speed 5300 1/min, suitable for point angles 90-140°, dimensions 300x130x190 mm, incl. work table without contents Auction-ID: A1-46480-3011

Magnet dimensions: 300 x 150 mm Grinding wheel diameter: approx. 150 mm Auction-ID: A7-46287-79

Equipped with original packaging Auction-ID: A1-46604-1

two pieces a double bench grinder and a belt grinder, manufacturer EINHELL, type: TC-BS 8038, year of construction: 2019 Reference: Hansmann - Lot 45 Dimensions: 500mmx400mmx200mm Weight: approx. 10kg Auction-ID: A7-46763-65

Including slides 230mm, 178mm, 125mm and 115mm, in various versions, 25 or 50 pieces / per pack including 1 box addressed Auction-ID: A1-46604-196

Including type Poly-PTX Flapwheel 105x50mm, Poly-PTX Mix wheel 115x100mm, Poly-PTX fleece Wheel 105x50mm,..., complete with some liquids Eisenblätter including oil and polyseal Auction-ID: A1-46604-110

In various versions including Z30-36 SXBF, A30-36 RBF and A24-30-36 Q BF A Cono,.., 25 or 50 pieces /per pack, 1 box used Auction-ID: A1-46604-107

Lying in original packaging in 15 boxes, Drop-off according to collection Auction-ID: A1-46604-63

in various versions including A60 SX Combi Speed, A30-36 RBF Heavy Cut, A24-30-36 R BF,.l., 25 or 50 pieces / per pack including 1 box addressed Auction-ID: A1-46604-105

Serial number: 815 Operating voltage: 380 V Frequency: 50–60 Hz Rated current: 14 A Table dimensions: 500 x 200 mm Universal part-head tip height: 170 mm Tailstock tip height: 120 mm (with intermediate support: 170 mm) Max. workpiece length between tips: 336 mm Workpiece diameter with self-supporting fastening: approx. 600 mm Max. tip length: 950 mm Inner cone Partial spindle: Morse 4 / Unified 40 T-slots: 12 mm (machine stand), 8 mm (other elements) Sharpening stroke: 190 mm Transverse movement Tool holder: 100 mm Vertical movement Grinding head: 325 mm Tool holder: 230 mm Dividing head on tool slide: 330 mm Grinding head holder / Tool holder / Grinding head / Universal apparatus: 360° Three-phase motor: 0.7 / 0.85 kW DC motor: 1.3 kW Spindle speed: 4000 / 8000 rpm (double priority) Infinitely variable DC: 2000 – 10000 rpm incl. two-axis digital display, Extensive accessories suita ...

Grinding and polishing equipment for metallographic section preparation Dimensions (WxDxH) = 80cm x 70cm x 20cm Auction-ID: A7-46410-1

in various versions including A 60 SXBF, A-60 SBF, SG60 SXBF and Sg 24 SBF, 25 pieces / per pack Auction-ID: A1-46604-102

Lying in original packaging in 15 boxes, Drop-off according to collection Auction-ID: A1-46604-60

In various sizes and designs including 125mm, 150mm and 230mm, Including for metal and stainless steel, Complete with metal display 63 x 48 x 208cm Auction-ID: A1-46604-96

Lying in original packaging in 15 boxes, Drop-off according to collection Auction-ID: A1-46604-62

Serial number: 156608 Magnet dimensions: 610 x 310 mm Grinding wheel diameter: approx. 250 mm Reference: Schmidt - Lot 111 Auction-ID: A7-46763-91

Industrial surface grinding machine for machining flat surfaces. Equipped with NC control, magnetic table and sprinkler system with tray and filtration. Auction-ID: A1-46647-11

incl. high-frequency sander from the manufacturer COOPER, type: BL-2B, year of manufacture: 2006 Auction-ID: A7-46287-135

Operating voltage: 3 x 400 V Frequency: 50 Hz Rated current: 35 A Control: SIEMENS SINUMERIK Grinding range: 600 x 350 x 375 mm Connection: 7 kW incl. clamping magnet Magnet dimensions: 600 x 350 mm Table dimensions: 820 x 350 mm Grinding wheel diameter: max. 300 mm incl. balancing device from the manufacturer MPM,Reference : Schönichen - Lot 61 Auction-ID: A7-46763-287

Working range 5-80 mm for tip grinding, tip angle infinitely adjustable from 50-180 °, tool speed 8-23 1/min, diameter of pointed disc 100 mm, speed of sharpening disc 2800 1/min, diameter of tip grinding wheel 300 mm, speed of tip grinding wheel 1420 1/min, grinding feed infinitely variable from 0.4-4 mm/min Auction-ID: A1-46480-3009

Type: CNC surface grinding machine Model: ABA Z&B EL 806 Year: 2003 Control: CNC control panel (integrated aba control) Working area: Magnetic clamping table Machine layout: Horizontal grinding spindle with enclosed working area Technical data: Voltage: 400 V Total power: 29 kW Machine weight: approx. 5,700 kg Equipment: - Magnetic clamping table - Enclosed grinding cabin with sliding door - Coolant system - Air filtration unit (AIRTECH) - Control panel with joystick and keypad Condition: Used, not tested Remarks: Signs of wear and corrosion visible; complete system with extraction unit Own mass: approx. 5,700 kg Dimensions (LxWxH): approx. 4000 x 2200 x 2200 mm Auction-ID: A7-45993-17

grinding diameter:600 mm grinding length:3000 mm centre height:300 mm weight of the machine ca.:11,8 t dimensions of the machine ca.:7100x2300 mm spindle turning speed range:14 - 220 U/min grinding wheel diameter:650 mm grinding wheel flange for width 25-40 mm:3 Stk. open tailstocks:3 Stk. chuck:Ø310 mm fixed steady:320 mm Distance between center: 3000 mm. Height of centres: 300 mm. Spindle speed: (n°12) 14 - 220 Rpm Max grinding diameter: 600 mm. Stroke the wheelhead:(rapid) 50 mm. Stroke the wheelhead:(rapid+ micrometrical): 1 5 500 m mmm. . Max grinding wheel diameter: 650 mm. Max tilt table: 3° 30' Total absorbed power: 27,7 Hp Dimension: 7100x2300 mm. Weight approx: 11800 Kg.

workpiece diameter:5-125 mm grinding depth:50-1000 mm clamping length:1000 mm total power requirement:1.9 KVA weight of the machine ca.:630 kg max. workpiece weight:100 kg Center Hole Grinding Machine. Workpiece must be rotated by machine during grinding

grinding length:600 mm grinding width:300 mm total power requirement:7,5 kW number of spindle speeds:0-3000 grinding wheel motor:7,5 kW grinding wheel diameter:300 mm dimensions of grinding wheel:76 x 20 mm ABA magnetic table flat grinding machine

drill diameter:5,,,,40 mm drilling length:600 mm lip angle:90-150 ° total power requirement:4,5 kW weight of the machine ca.:0,8 t dimensions of the machine ca.:2-2-2 m CNC programmable according to ISO Point angle 90-140 degrees, disc stroke x 80mm y 80mm grinding wheel 6mm to 150mm ceramic or CBN speed 2500 to 6000 rpm Grinding options - 3 facets 6 surface grinding (Renault patent) - conical surface grinding with cross-section correction / point thinning / cross point. / Type 2/1 Avyac grind / 4 faces gr. Cross for deep drill

weight of the machine ca.:24 t dimensions of the machine ca.:3900 x 3500 x 2500 m -the machine has no B axis -two grinding spindles with one grinding wheel each - The transport instructions can be found in the documentation (attachment). including Hoffmann KSM filter system Loading list available Operating data v. 03/27/2023: Operating time: 21727 h / production time: 11960 h Machine documentation: 1 set of circuit diagrams, electrical plans, operating instructions Accessories: 2 replacement measuring heads Marposs S/500; prism supports Other: Hoffmann KSM filter system Machine condition: according to age, due to processing with emulsion

grinding diameter:20 mm grinding length:20 mm max. workpiece diameter:20 mm min. workpiece diameter:1 mm grinding wheel diam. min/max.:300-400 grinding wheel turining speeds:2.000-7.000 U/min Weight:950 kg dimensions: 1200 x 2100 mm

grinding length:600 mm centre height:180 mm swing dia.:360 mm workpiece weight:80 kg max. dia. of grinding wheel:500 mm grinding wheel width:80 mm grinding wheel hole diameter:203,2 mm peripheral speed:45 m/sec There is also a 3200 liter coolant tank including cooling unit + fire extinguishing system.

internal diameter:140 mm total power requirement:5,5 kW weight of the machine ca.:1,8 t dimensions of the machine ca.:2,8 x 2,5 m max. workpiece weight:15 kg clamping dia. max.:140 mm clamping length:250 mm max. bore diameter to be ground:0,8-90 mm min./max. hole to grind:160 mm centre height:90 mm workpiece spindle stepless:112-1000 U/min

grinding diameter:5-55 mm grinding length:500 mm total power requirement:44 kW -- Intended use and general information -- Fully automated external and surface grinding of synchronous rings Centre height: 200 mm Grinding length: 500 mm Grinding wheel arrangement: right, 30° angled Grinding wheel dimensions: 600 x 30 x 203.2 mm Drive power: 7 kW X/Z axis drive: ball screw Travel speed: 0.01 - 10,000 mm/min. Resolution: 1 µm Concentricity of workpiece spindle: < 1 µm Workpiece changing system: Fanuc robot Control: Siemens Sinumerik 840-D Machine weight: 7,000 kg Centre height: 200 mm Grinding length: 500 mm

grinding diameter:200 mm grinding length:320 mm total power requirement:3,5 kW weight of the machine ca.:9 t space required L x W X H:5,28 x 4,5 x 2,4 m max. wheel dia.:200 mm Spindle drives Arena Siemens For Worm grinding we have not module, but pitch. Pitch is freely programmable from 0.001 to big value i.e. 500mm

grinding length:1370 mm grinding width:560 mm workpiece height:800 mm total power requirement:50 kW dimensions of the machine ca.:9 m ABA Z&B 2000, profile grinding machine with swivel dresser Mounting fixtures: magnet, dividing head E-axis dresser B-axis dividing head

grinding length:1500 mm centre height:325 mm weight of the machine ca.:12 t Karstens EMAG H310 Universal Grinding Machine Year of manufacture: 2004 Center distance: 1500 mm Center height: 325 mm Reinforced workpiece spindle, load capacity up to 250 kg Driven C-axis for polygon, thread, and eccentric grinding. 3 individually mounted grinding spindles. Siemens 840D control system

adjustment drive of the grinding spind.slide:0,0025 - 0,05 mm total power requirement:100 kW adjustment of grinding head slide:150 mm weight of the machine ca.:17 t grinding spindle drive:2 x 37 kW grinding width:30-150 mm peripheral speed:34 m/sec workpiece speeds:60 - 300 mm/Sek. grinding height:70 mm grinding wheel diameter:750 mm grinding tools:750 x 75 x 350 mm grinding wheel turning speeds:870 U/Min. max. workpiece diameter:250 mm

grinding diameter:250 mm grinding length:2710 mm max. module: min. module: total power requirement:45 kW weight of the machine ca.:15 t space required L x W X H:7,1 x 4,7 x2,7 m max. wheel dia.:450 mm Spindle drives Arena Siemens For Worm grinding we have not module, but pitch. Pitch is freely programmable from 0.001 to big value i.e. 500mm Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

grinding height:-- mm grinding width:220 mm grinding wheel diameter:762 mm total power requirement:90 kW weight of the machine ca.:13 t grinding spindle 1 drive::37 kW grinding spindle 2 drive::37 kW Grinding machine for pre-grinding the connecting rod With 2 replacement spindle motors

grinding length:450 mm grinding width:250 mm workpiece height:280 mm Table area:760 x 250 mm grinding spindle drive:2,5 kW grinding wheel dia. x width:250x 25 mm grinding spindle speed:1430/2900 U/min way of grinding spindle saddle, vertical:400 mm total power requirement:4,5 kW weight of the machine ca.:1,8 t dimensions of the machine ca.:1,8 x 1,4 x 2,0 m Machine equiped with magnetic plate - dresser