gear grinding used for sale

Grinding wheel diameter: approx. 60 mm

Tube grinding/satin finishing machine - For sanding, satin finishing, and high-gloss polishing - Large wrapping angle of 270° for efficient work - Belt speed infinitely adjustable - Flexible and handy - perfect for railing construction Connection voltage 230Volt Power 800W Tape dimension 40 x 760mm For pipe diameters up to 180mm Condition: never used / new (5)

Mounted on workbench, disassembly is the responsibility of the buyer

Center distance: 700 mm Turning diameter over table : 280 mm Table size : 900 x 130 mm Table movement along : 410 mm Table movement transverse : 220 mm Height adjustment grinding head : 260 mm Grinding spindle speed : 3000-6000 rpm Complete with manual

Jig grinding machine HAUSER S3-111

Technical data Type: F 50 Grinding length: 500 mm (600 mm without magnetic plate) Grinding width: 200 mm Table size: 200 x 600 mm Spindle speed: 3000 rpm Grinding wheel: Ø 225 x 25 x 51 mm Power: approx. 2.7 hp Weight: approx. 1200 kg Configuration Magnetic clamping plate Automatic transverse feed Stepless table movement Fine adjustment of the grinding head Coolant Setup Protective cover

gebr. Long belt sanding machine incl. brush unit LONG FENCE LZG-S YOC 1995 CE marking available Connected load: 5.0 kW (11.6 A) Motor power: 3.2 / 4.8 kW 2 belt speeds: 700 + 1,400 rpm Table size: 100 x 250 cm Belt length: 6,800 mm Belt width: 150 mm electr. Table height adjustment Table height adjustment range:350 mm Large column projection depth: 1,000 mm (single-sided) Column projection height: 350 mm Selector switch for left/right rotation integr. Lighting Drawer grinding device with removable table insert pneumatic belt cleaning incl. 2 grinding pads: 1x standard + 1x roller sanding shoe Brush unit LANGZAUNER LZB Motor power: 1.3 kW no retail sale! Extraction connection: 180 mm Dimensions (approx. information): L 373 cm W 140 cm H 161 cm Weight: approx. 700 kg Machine in good used condition, as little used.

Grinding width 1350 mm CE VERSION V400/50 50-Hz Side viewing windows for the grinding units  LED Interior Lighting Vacuum table with 4 kW fan fan Infeed and outfeed roller table for long workpieces Tynex structuring unit at the outlet 5.5 kw Structuring brush K46 and pressure roller at the outlet Z-version for RRTC 135 - Pneumatic roller on/off on the calibration unit with steel roller - Pneumatic roller on/off on the fine grinding roller  - Pneumatic roller on/off on the TC combination unit - Electronic semented sanding shoe (56mm pitch) - Electronic

Saw blade grinding machine with: - Diamond grinding wheel for carbide circular saw blades - Rubber feet for damped and quiet operation - Spacers for different saw blade holes Without saw blade Saw blade diameter 80 - 700 mm Workpiece headstock motor 0.25 kW Grinding wheel diameter 125 mm Speed 2850 rpm Grinding range -20 to +20 degrees Machine weight approx. 12 kg Space requirements approx. 700 x 400 x 300 m Condition: never used / new (5)

Swivelling grinding unit up to 45 Work table 960 x 350 mm Table height adjustment 230 mm Belt length 3000 mm Belt width 200 mm Engine 3 kw 4 hp Weight 450 kg

Work table, mm 750 x 300 Table height adjustment, mm 200 Strap length, mm 2600 Belt width, mm 150 Sanding belt rear panel, mm 850 x 200 Belt speed, m/s 20 Oscillation stroke, mm 20 Oscillatory motor, kW (hp) 0.25 (0.34) Speed, min-1 2840 Space bed, mm 1600 x 850 x 1350 Engine power, kW (hp) 3.0 (4.0) Weight, kg 180

An internal cylindrical grinding machine Jung C8, which was modernized by Retza, is available. Grinding diameter range: 6mm-50mm, max. grinding depth: 80mm, speed: 1000rpm, machine dimensions X/Y/Z: approx. 2100mm/1400mm/1400mm, weight: approx. 2000kg. Without grinding spindle and without inverter for it. An on-site inspection is possible.

Kündig Premium-1 1100 K Quality product from Switzerland CONSTANT TABLE MACHINE / automatic Headhead delivery Wide-belt calibration fine grinding machine Combination unit grooved rubber contact roller in proven hardness Contact roller level infinitely adjustable according to grain scale pneum. Lifting/lowering the contact roller pneum. Sanding pad with quickly replaceable sliding coating and precision pressure regulator Parallel spring-loaded, ground steel pressure roller at the inlet Rubberized pressure roller on the spout Belt drive motor power 11 kW Working width 1100 mm Max. workpiece passage height 200 mm Feed speed 3-15m/min. infinitely variable Automatic workpiece thickness adjustment ENORMATIC quick adjustment with feed release (for long workpieces) PLC control with touch screen and teach-in storage for automation and management of all work programs Infeed and o ...

2 engines  Motorized height adjustment  Table length 300 cm without extraction fan  Space requirement length 430 cm

Wide belt grinding machine  with 3 rollers and 3 belts Grinding width 1300 mm Year of manufacture 2001 Power 33 kw 2 main engines  Amper 69

Grinding width 950 mm  Steel roller for calibration  1 belt combi unit design Ce Version V 400/50 Entrance and exit table extensions Moving carpet centering  Automatic electronic operation control

Grinding width 950 mm Ce version V400/50 1 belt combi unit design Steel roller for calibration  Grinding bug selection from the control panel Sanding shoe selection from the control panel  Sanding Pad Control On/Off FOX500KRT Electronic table positioning from the grinding table  Entrance and exit table extensions Moving carpet centering 

Cylindrical grinder STANKO 3A164/2000

Table dimensions X/Y: 900mm/300mm, max. grinding length: 900mm, max. grinding width: 350mm, max. table to spindle center distance: 575mm, max. table load: 670kg, max. table longitudinal movement/cross movement: 859mm/300mm, grinding spindle speed: 2800rpm, grinding wheel outer diameter min./max.: 400mm/165mm, bore diameter for 400mm: 127mm. Machine dimensions X/Y: approx. 1100mm/1100mm, weight: approx. 3100kg. Documentation available. On-site inspection is possible.

Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible.

Two identical single wood belt sanding machines Löwer are available. Sanding belt length: 1600mm, sanding belt width: 160mm, working width: 150mm, feed rate: 16m/min, extraction connection: 100mm. Machine dimensions X/Y/Z: approx. 1400mm/1000mm/1600mm, weight: approx. 650kg. On-site inspection is possible.

centre height: 250 mm centre distance: 600 mm Dimensions (L/W/H): 3600 x 1900 x 2100 mm weight of the machine ca.: 2,25 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A surface grinding machine ELB-Schliff with position display is available. Magnetic chuck dimensions X/Y: 900mm/450mm, grinding length: 900mm, grinding width: 450mm. Documentation available. An on-site inspection is possible.

Grinding length: 600mm, grinding width: 250mm, table dimensions X/Y: 600mm/250mm, max. table speed: 22m/min, table height: 1020mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm. Machine dimensions X/Y/Z: approx. 1800mm/1100mm/1900mm, weight: approx. 1500kg. The machine was sealed about 5 years ago but currently shows a new leakage. Documentation available. An on-site inspection is possible.

Largest grinding length 1200 mm Longest grinding length with table dresser 1000 mm Largest grinding width 600 mm Grinding height (table bottom edge grinding wheel) 550 mm Table load with magnetic pallet 975 kg Table load without magnetic plate 1200 kg Table speed 1 - 40 m/min Grinding spindle Motor spindle 11 KW Grinding wheel 406 x 152.4 x 100 mm Speed 1400 rpm Longitudinal axis (z-axis) Rapid traverse 5 m/min Adjustable feed rate 1 - 50 mm Infinitely adjustable feed 0 - 2000 mm/min smallest infeed 0.001 mm Perpendicular axis (y-axis) Rapid traverse 1.5 m/min smallest infeed 0.001 mm Space requirement approx. 4450 x 2935 x 2540 mm Total weight approx. 6700 kg Equipment: - Electropermanent magnetic clamping plate 1000 x 500 mm incl. electron. Control module and potentiometer - Coolant cleaning system with paper filter and magnetic separator 350 l - fl ...

Key data: 400 mm, 150 mm

Year of manufacture 1983 Grinding length 400 mm Grinding width 150 mm Installation height 400 mm Table load 75 kg All feeds are infinitely variable Drive power 1.5 kw Automatic delivery Magnetic Plate 400 x 150 mm Puller Wet grinding device Machine is in good condition

CNC Ball Valve Grinding Machine Saporiti PV 500 Year of construction 2014 Siemens Sinumerik 840D Ball/sphere diameter: max. 500 mm Travels: X-axis 510 mm Z-axis 950 mm Y-axis +/- 1.5 mm Workpiece diameter x length: max. Ø 600 x 1,100 mm Workpiece weight: max. 1,000 kg Headstock speed: max. 200 rpm. Grinding wheels speed: max. 6,000 rpm. Water filter: 2,000 l Machine dimensions: L x W x H 3,300 x 2,500 x 3,000 mm Required footprint: L x W x H 7,700 x 6,000 x 3,100 mm Machine weight: approx. 15,000 kg Accessories: RENISHAW measuring system with Saporiti-specific software for easy centering of the tool to the ball A Saporiti PV-1000 from 2014 is also available. Condition: Is said to be excellent Offer number V-7140

CNC Ball Valve Grinding Machine Saporiti PV 1000 Year of construction 2014 Siemens Sinumerik 840D Ball/sphere diameter: max. 1,100 mm Travels: X-axis 1,150 mm Z-axis 1,350 mm Y Axis +/- 2 mm Workpiece diameter x length: max. Ø 700 x 1,100 mm Workpiece weight: : max. 6,000 kg Headstock speed: max. 200 rpm Grinding wheels speed: max. 1,200 rpm Water filter: 3,000 l Machine dimensions: L x W x H 8,000 x 4,100 x 3,500 mm Required footprint: L x W x H 9,100 x 8,200 x 3,600 mm Machine weight: approx. 36,000 kg Accessories: RENISHAW measuring system with Saporiti-specific software for easy centering of the tool to the ball Hydraulic system Coolant coolers Engine Radiator Coolant filter A Saporiti PV-500 from 2014 is also available. Condition: Is said to be excellent. Offer numb ...

Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500

Long belt sanding machine Johannsen Type T8E Machine No. 14185 Built in 1979 Sanding belt dimensions 7100 mm x 150 mm Table size 2500 mm x 950 mm Upper sanding belt cover Motor power 4 kW Sanding belt 2 speeds left and right rotation Clearance under belt maximum 470 mm Right offset 300 mm Extraction connection diameter 160 mm Dimensions 3750 mm x 1350 mm x H 1400 mm Weight approx. 850 kg

Belt loader, coolant filter, wheel changing equipment, grinding and drag rules and grub screws, Grinding wheel dimensions (od x id x width): 610 x 355 x 304,8 mm, Ø min / max to grind: 2/150 mm, Regulating wheel speed nº: infinite, Min/max speed of regulating wheel (r.p.m.): 10/225 r.p.m., Dressing (auto / manual): Automatic - CNC, Lubrication (auto / manual): Automatic, Control type (CNC/manual): CNC, CNC brand: FANUC, CNC model: Oi TD, Dive (auto/manual): Automatic , Dimensions of the regulating wheel (OD x ID x W): Ø350 x Ø203,2 x 355 mm, Infeed (auto / manual): Automatic, Regulating wheel dimensions (od x id x width): Ø350 x Ø203.2 x 177.5 mm, Maximum infeed grinding length: 355 mm, Motor power cooling: 0,70 Kw, Coolant system motor power: 0,70 Kw, Grinding wheel head motor power: 37 Kw, Total power: 45 Kw, Voltage: 220/380Kw, Long: 1.165 mm, Width: 3.398 mm, High: 1.700 mm, W ...

1 piece surface grinding machine FS 640 SC with Fagor control Make: Geibel&Hotz Year of Make: 2010 Technical data Working Range: Grinding area - Maximum grinding area 600 x 450 mm - Standard magnetic plate dimensions 600 x 400 mm - Clamping surface table to spindle centre 140 - 525 mm - Standard grinding wheel 300 x 50 x 76.2 mm - Table load incl. magnet 600 kg - Power grinding spindle motor approx. 3.7 kW - Total connected load approx. 11 kW - Table speed 2 to 28 m/min - Transverse/vertical speed 100-1000 mm/min Dimensions 3.95 x 3.16 x 2.47 m Machine weight approx. 2.1 t Facilities machine-specific accessories, belt filter system, magnetic separator, extraction Magnetic clamping plate with adhesive force control, automatic dressing incl. compension, Dressing diamond, balancing device, clamping device, 4 grinding wheels

This Schaudt ZX 11 grinding machine was manufactured in 1998. It includes a Knoll VRF 450/2250 system and features transport dimensions of approximately 8 loading metres at a maximum height of 2.2 meters, weighing around 7.5 tons. Accessories include a measuring and positioning system, tailstock, and a special chuck for shaft parts. A great opportunity to buy this Schaudt ZX 11 grinding machine. Contact us for further details regarding this grinding machine.

This KELLENBERGER KEL VARIA RS 175/1000 Grinding machine was manufactured in the year 2004 in Switzerland. It is equipped with a HEIDENHAIN control unit.

This VOUMARD VM 110 CNC T was manufactured in 2008. A robust internal grinding machine, it features a GE FANUC Series 31i-Model A control, a maximum grinding diameter of 150 mm, and a depth of 80 mm. It supports a longitudinal travel (Z-axis) of 300 mm and a cross travel (X-axis) of 220 mm. Consider the opportunity to buy this VOUMARD VM 110 CNC T internal grinding machine. Contact us for more information.

This 3-axis Proth PSGS-3060AH surface grinding machine was manufactured in 2008. It offers precision and durability for various grinding applications. Consider the opportunity to buy this Proth PSGS-3060AH surface grinding machine. Contact us for more information.

This MELCHIORRE ELC 800 7S was manufactured in 2000. It is a surface grinding machine featuring a maximum wheel diameter of 800mm. Consider the opportunity to buy this MELCHIORRE ELC 800 7S surface grinding machine. Contact us for more information.

This AMADA MEISTER G3 was manufactured in 2013. A robust surface grinding machine, its ideal for precision metalworking. Consider the opportunity to buy this AMADA MEISTER G3 surface grinding machine. Contact us for more information.

This 3-axis Proth PSGS 3060 BH / S1 surface grinding machine was manufactured in 2018. It features a table size of 300 × 600 mm and an electromagnetic chuck of the same dimensions. The grinding wheel measures 355 × 38 × 127 mm. Powered by a 3.7 kW spindle motor, this robust machine weighs approximately 1,900 kg. Consider the opportunity to buy this Proth PSGS 3060 BH / S1 surface grinding machine. Contact us for more information.

Inv. Num. : 6614 Type: - Producer: JUNG Generated: Parameters: Equipment: DRO In good technical condition.

This 3-axis JUNKER QUICKPOINT 5002/10 was manufactured in 2002. It features a Siemens control system, Marposs measuring, and CNC-controlled Z-axis and grinding spindle head. With a grinding length of 1000 mm and a diameter up to 280 mm, its ideal for precision surface grinding. Consider the opportunity to buy this JUNKER QUICKPOINT 5002/10 surface grinding machine. Contact us for more information about this machine.

grinding diameter: mm grinding length: mm feed in: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This FAVRETTO MC 130 surface grinding machine was manufactured in 1996. It features a table size of 1300 mm by 500 mm and is equipped with a DIGIT Favretto CNC system. The grinding wheel measures 406 mm in diameter and 152.4 mm in width. It has a powerful 15 kW grinding spindle motor and weighs 8,600 kg. Contact us for more information about this machine.

This Kellenberger R125 x 600 cylindrical grinding machine was manufactured in 1984. It features a grinding diameter of 250 mm, a length of 600 mm, and a centre height of 125 mm. The machine can handle a maximum workpiece weight of 130 kg and includes a tailstock with a quill travel of 30 mm. For more information about this machine, please reach out to us.

Manufacturer: ELB Model: Optimal 6375 Year of Manufacture: 1990 Magnet 500 x 350 mm Accesories: Coolant tank 5 grinding wheel flanges Various used grinding wheels Balancing scale with mandrel for grinding wheels Find more here - / Contact us at -

This 3-axis QGrind QGRIND U1000 cylindrical grinding machine was manufactured in 2021. It features a max workpiece diameter of 450 mm, a distance between centers of 1000 mm, and a grinding length of 800 mm. Equipped with a Fanuc 0i-TF control unit and a 15 touchscreen, it offers precise control and ease of use. Consider the opportunity to buy this QGrind QGRIND U1000 cylindrical grinding machine. Contact us for more information.

CHEVALIER FSG-1640ADIV surface grinding machine was built in 2022 in Taiwan by Falcon Group Co., Ltd. The machine is used for precision grinding of workpieces with a maximum weight of 440 kg. A number of state-of-the-art technical solutions, combined with extensive equipment, make it the best choice for professional production applications. Grinding is performed fully automatically on a large electromagnetic plate or directly on the work table. The work table is hydraulically driven and moves on ground and induction hardened guideways. To achieve the highest machining accuracy and precision, the CHEVALIER FSG 1640 ADIV magnetic surface grinding machine is equipped with dynamic balancing and automatic dressing of the grinding wheel. During grinding wheel dressing, the work table automatically positions itself where the diamond tools are and compensates according to the operator’s  ...

This DOEBELI FSM150 S surface grinding machine was manufactured in 1997. It features dimensions of 1,800 x 1,700 x 1,900 mm and a weight of approximately 2,500 kg. The machine includes a Lehman dividing machine EA-407.1A, six base holders with various accessories, and multiple collet chucks. Consider the opportunity to buy this DOEBELI FSM150 S surface grinding machine. Contact us for more information.

Offered is a used high-precision Studer S35 CNC cylindrical grinding machine. Center distance: 1000mm, center height: 175mm, swing diameter max. approx. 350mm, workpiece weight: approx. 80kg, resolution: measuring systems glass scales range 0.0001mm 0.1µm. Inspection by appointment possible.

This 6-axis SAACKE UWIID grinding machine was manufactured in 2001. It features a NUM 1050 control, Num MDLU2 drives, a 24-pocket grinding wheel changer, and a Felsomat 70-slot workpiece loader. Equipped with CNC steady rest, automatic gripper clamping, and NUMROTO plus 3.8.1o software, its ideal for manufacturing and resharpening. For more information about this grinding machine, please reach out to us.