gear grinding used for sale

Machine spindle, precision spindle, double grinder spindle, precision spindle for belt drive, belt drive spindle -Manufacturer: Jung, machine spindle -Type: MP 5z -Speed: max rpm -Recording: Dimensions see photos -Dimensions total: 460/210/115 mm -Weight: 16.2 kg

Machine spindle, precision spindle, double grinder spindle, precision spindle for belt drive, belt drive spindle -Manufacturer: Jung, machine spindle -Type: MP 10z -Speed: max rpm -Recording: Dimensions see photos -Dimensions total: 545/210/120 mm -Weight: 23.5 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Ø 55 mm, thread M60 see photos -Whetstone: Dorfnerwerk type 5A 100-JOT8-UEH 400 x 40 mm -Transport dimensions: Ø 440 x 85 mm -Weight: 32.6 kg

Universal tool and cutting grinding machine TACCHELLA 4 AM - Universal device, Hydraulic movement of the table., Information about technical data are not binding., Machine available subject to prior sale., Longitudinal travel x axis: 400 mm, Cross travel y axis: 250 mm, Clearance between worktable and spindle axis: 375 mm, Wheel speed: 3000/6000 rpm, Wheel dimension: 200x20 mm, Spindle motor power: 1,5 Kw, Weight: 1150 Kg, Accessories: Cooling system, motorized dividing device

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Ø 55 mm, thread M60 see photos -Whetstone: Dorfnerwerk type 5A 100-JOT8-UEH 400 x 30 mm -Transport dimensions: Ø 400 x 80 mm -Weight: 28.7 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø47-55 mm, thread M60 see photos -Grindstone: Dorfnerwerk Type 5A 120-JOT8-UEH 400 x 20 mm -Transport dimensions: Ø 430 x 80 mm -Weight: 26.4 kg

Michael Deckel S0E Stylus Tool Grinding Machine, SOE Weilheim TOP Condition Total weight approx. 90kg Top grinding wheels with an outer diameter of up to max. 100mm are used Absolute top condition! Only one overhauled machine has a slightly superficial patina the bare metal parts. The pictures speak for themselves. The workshop dream in Reseda green :-) Plug with phase inverter

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø47-55 mm, thread M60 see photos -Grindstone: 400 x 40 mm, unfortunately without type designation -Transport dimensions: Ø 400 x 85 mm -Weight: 31.1 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Ø 55 mm, see photos -Grindstone: 420 x 60 mm, unfortunately without type designation -Transport dimensions: Ø 420 x 87 mm -Total weight: 37 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø 62-69 mm / Left thread. -Grinding wheel: Ø 450 x 40 mm -Transport dimensions: Ø 450 x 140 mm -Total weight: 30 kg

max. grinding diameter: 300 mm grinding length: 500 mm workpiece length: mm Number of axles: 6 St. centre height: 220 mm centre distance: 500 mm x-axis: 500 mm y-axis: 320 mm z-axis: 320 mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m Height of centres 200 mm Distance between centres / clamping length 750 / 500 mm Table size 290 x 1,600 mm Intermediate table 110 x 1,200 mm X / Y / Z axes 500 / 320 / 320 mm Feed speeds, X, Y & Z axes 0.005 - 5 m/min Grinding head swivelling, vertical axis (B axis) 300 ° Grinding head tilting (C axis) +/- 30 ° Speed range of R axis 0 - 50 rpm Grinding spindle speeds, approx. 5,000 - 10,000 rpm Workpiece holding fixture 50 ISO Indexing 1 - 999 ° Leads 0.5 - 10,000 mm Spindle drive 4 kW Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4,000 kg Accessories / Special Features SCHÜTTE CNC ...

grinding length: 600 mm grinding width: 300 mm workpiece height: 350 mm total power requirement: ? kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 2,522 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone, 2 pieces -Mounting: Hole shaft cone Ø 50-60 mm -Grinding wheel: Ø 225 x 40 mm -Shipping/Price: complete -Dimensions each: Ø 225 x 90 mm -Weight: 10.4 kg/piece

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø 32-35 mm -Grinding wheel: Ø 210 x 40 mm -Transport dimensions: Ø 210 x 70 mm -Total weight: 4.3 kg

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone, 2 pieces -Mounting: Hole shaft cone Ø 44-55 mm -Grinding wheel: Ø 270 mm, see photos -Shipping/Price: complete -Dimensions each: Ø 270 x 80 mm -Weight: 9.7 kg/piece

Maximum length of the piece: 1100 mm, Minimum length of the piece: 50 mm, Maximum diameter of the piece: 125 mm, Minimum diameter of the piece: 8 mm, Center height of tailstock above guide: 145 mm, Center height of tailstock above carriage: 65 mm, Centering hole taper angle: 60°, Larger diameter of centering hole cone: 50 mm, Diameter of smallest centering hole: 2 mm, Grinding spindle speeds: 45000 / 22 500 / 13 000 rpm, Hollow screw speed: 400 rpm, Stroke of the grinding wheel along the grinding surface: 0.75 - 5 mm, Diameter of grinding wheels: 15, 27, 48 mm, Weight approx.: 460 kg, Dimensions (length x width x height): 850 x 750 x 1850 mm

TOS BUC 63A/3000 Cylindrical Grinding Machine Grinding Diameter 630 mm Grinding Length 3000 mm Height of centers 315 mm Workpiece Weight 2500 Kg Max. Grinding wheel dimensions 750 x 100 x 305 mm Spindle Speed 840/970 rpm Workpiece Spindle Speed 8 - 315 rpm Grinding support stroke 90 / 280 mm Table Speed: Variable - from 0.01 to 3.6 m / min Grinding Head Swivel 90 Degree Table Swivel +/- 5 Degree Work Head Tilts from 90 taper - Morse 6 Spindle Drive 15 KW Machine Dimensions 10000 x 3400 x 2000 mm Machine Weight 13.7 Ton Machine weight approx. 12 t Space requirement approx. 12 x 4.3 x 1.9 m Total power input 22 kW

grinding length: 2000 mm grinding width: 600 mm workpiece height: mm Control: total power requirement: 17 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter max.: 30 mm regulating wheel width: 12 mm max. width of grinding wheel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 1.100 mm Number of sanding units: 2 st. Workpiece thickness max.: 150 mm sanding belt measurements: 1.110 x 1.900 mm Motor roller: 15 kW Motor pad: 11 kW Feed motor: 1,5 kW Feed speed: 3 - 15 m/min. Overall size: 1.750 x 2.210 x 2.280 mm Weight: ca. 3.300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 280 mm gear width: 330 mm max. module: 5 min. module: 1 Control: LIEBHERR CNC total power requirement: 28 kW weight of the machine ca.: 12 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 460 mm threading length: 900 mm thread pitch: 100 mm total power requirement: 10 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Grinding discs: Ø 300 x 40 mm -Operating voltage: 380 volts

grinding length: 1600 mm grinding width: 600 mm workpiece height: 500 mm total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 3 kW -Grinding discs: Ø 400 mm -Operating voltage: 380 volts -Weight: 200 kg

Inv. Num. : 8313 Type: 1500 R Producer: Kellenberger Created: 1972 Parameters: Table dimensions: 2060 x 140 mm Maximum grinding diameter: 250 mm Max. grinding length: 1500 mm Length: 3270 mm Width: 1600 mm Height: 1650 mm Weight: 3250 kg Equipment: DRO

grinding range: 8 - 32 mm sharp cornered angle min./max.: 90 - 140 Grad connected load: 230 V weight of the machine ca.: 16 Kg dimensions of the machine ca.: 0,43 x 0,24 x 0,24 m Drill grinding machine: Additional station for grinding back the drilling cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Hard metals with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running thanks to its heavy weight and rubber feet. Sharpening angle adjustable for all common twist drills. Package dimensions: 430 x 240 x 240mm. Weight 16kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1745 rpm -Grinding discs: max. Ø 315 mm -Operating voltage: 380 volts -Weight: 230 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1410 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 200 kg

Key data: 3000 mm, 850 mm

Crankshaft Grinder BERCO RTM 425 Center height mm.425 Max swing mm.850 Center distance mm.3000 Wheel flanges Rests Machine dimensions mm.7100 x2350 Weight approx Kg 9000 Perfect working condition

grinding range: 2 - 13 mm sharp cornered angle min./max.: 90 - 140 Grad connected load: 230 V weight of the machine ca.: 10 Kg dimensions of the machine ca.: 0,35 x 0,2 x 0,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1410 rpm -Peripheral speed: 45 m/s -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 290 kg

Specifications: - Sanding belt dimensions approx. 2000 x 150 mm - Surface grinding opening approx. 560 x 150 mm - Sanding belt speed approx. 30 m/sec. - Contact washer B 150 / D 200 mm - Drive pulley B 150 / D 200 mm - Drive 400 V / 3 kW - Working height adjustable -Mot. Dust extraction - Space requirement approx. W 750 x H 1050 x D 1500 mm - Weight approx. 120 kg

External/Internal Cylindrical Grinding GENDRON RU 28.100 Between points: 1000 mm Maxi grinding diameter: Ø 290 mm Tool holder rotation: from 70 to 370 RPM 4-jaws Ø 200 mm chuck Grinding wheel: Ø 300 mm Auto pass plug Swivel table External hydraulic group External lulbricant tank Voltage: 380 V Dimensions (L x W x H): 3000 x 1900 x 2000 mm Weight: approx 3 T

Grinding wheel dimensions (od x id x width): Ø508 x Ø304.8 x 254 mm, Ø min/max to be rectified: 150 mm, Grinding wheel width: 254 mm, Maximum length to be rectified in plongeé: 254 mm, Drive wheel dimensions (OD x ID x W): Ø330 x Ø203 x 254 mm, Regulating wheel motor power: 4 Kw, Grinding wheel head motor power: 37 Kw, Hydraulic motor power: 2,2 Kw, Total power: 45 Kw, Long: 3.500 mm, Width: 2.500 mm, Tall: 1.100 mm, Weight: 6.500 Kg

Key data: 400 mm, 1500 mm

Control Siemens ... Simatic OP17 Max. grinding diameter ... 400mm Max. sanding length ... 1500mm Max. workpiece weight ... 500kg Internal grinding Machine weight ... 9200kg L x W x H ... 6220x2760x1950mm The machine is in good condition, possible to test under power.

grinding range: 3 -28 mm angle adjustable from - to: horizontal 0-180 Grad angle adjustable from - to: vertikal 0-45 Grad angle adjustable from - to: negativ 0-52 Grad clamping range: 3 - 28mm mm 0: 5200 U/min connected load: 230 / 250 Volt / Watt wheel diameter: 100 x 50 x 20 mm weight of the machine ca.: 45 Kg dimensions: 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16 - 5/16 - 3/8 - 1/2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding stone, grinding pin -Recording: M12 -Outer diameter: 50 mm -Length: 65 mm -Quantity: 74 pieces -Sale: only complete set -Weight: 28 kg

grinding stone, grinding pin -for internal grinding machine -1 Collet chuck -Cone mount: Ø 53 mm -Grinding pins: various diameters -Outer diameter: 1-40 mm -Sale: only complete set -Weight: 6 kg

Widebelt Sander line with 3 machines Working width: 1300 Composed of: Boere Elite - 1 x calibration unit with contact roller - sandinmg unit from below Ernst LKB - Cross Sanding Unit - Longitudinal Sanding Unit OTT RSO - Calibration Roller - Sanding pad

Suitable for automatic cutting and surface grinding of hard metal and HSS rods with high precision for standard and special solutions Accessories: Total enclosure,, Automatic feed (hydro-pneumatic),, Rapid traverse adjustable via touch panel, Automatic fire extinguishing system Kraft & Bauer FB 703,, Length positioning freely programmable,, Control system Siemens Simatic HMI,, Preparation for connection to central coolant system., Workpiece diameter with loading magazine: 3 - 20 mm, Workpiece length without loading magazine: 3-32mm, Workpiece length with loading magazine: 3-350mm, Workpiece length without loading magazines: 1-450mm, Spindle speed grinding spindle: 2000 rpm,, mass: approx. 1,700 kg, weight: approx. 1,700 kg, Dimensions L x W x H: 1900 x 1200 x 2400 mm, colour: Gray

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.5 kW -Speed: 1430 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Dimensions: 700/550/H1200 mm -Weight: 170 kg

Stock number: 3986 SURFACE GRINDING MACHINE Manufacturer: SEEST , Type: Surface grinder Specifications: Large stone diameter 350 mm Automatic feed. Length: 1500 mm, Height: 1200 mm, Width: 800 mm , Weight: 1000 kg

Suitable for automatic cutting and surface grinding of carbide and HSS rods with high precision for standard and special solutions. Accessories: Total enclosure, Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel, Automatic fire extinguishing system Kraft & Bauer FB 703, Freely programmable length positioning, Siemens Simatic HMI control system, Prepared for connection to a central coolant system., Weight approx: 1700 kg, Dimensions W x D x H: 1900 x 1200 x 2400 mm, Cutting disc diameter: Max. 200 mm, Drive power grinding motor: 4,0 kW, Workpiece length without loader magazines: 3 - 450 mm, Workpiece diameter without loading magazine: 3 - 32 mm, Workpiece length with loader magazine: 1-350 mm, Workpiece diameter with loading magazine: from 3 - 20 mm

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.37 kW -Speed: 2900 rpm -Grinding discs: max. Ø 175 mm -Operating voltage: 380 volts -Dimensions: 420/390/H1150 mm -Weight: 65 kg

Surface Grinding Machine ABA FFV 1000/50 Travel X: 1000 mm Travel Y: 500 mm Travel Z: 400 mm Magnetic chuck dimensions: 1000 x 400 mm Auto stepover X / Y / Z Separate electrical panel Separate lubricant tank Separate hydraulic group Voltage: 380 V Length: 4000 mm Depth: 1700 mm Total height: 2300 mm Weight: approx 6 T

Suitable for chamfering and surface grinding of hard metal rods. Accessories: Full cladding, Wet grinding device, Loading magazine for workpieces from 30 - 150 mm, Hydraulic feed of the grinding head, Hydraulic feed of the workpiece spindle head, Hydraulic workpiece clamping of the cylindrical grinding device, Preparation for connecting an extraction system, Automatic fire extinguishing device, Touch panel TP 177 A., workpiece diameter automatic mode: 3 - 20 mm, workpiece diameter semi-automatically: 3-32mm, workpiece length semi-automatic: 3-32mm, workpiece length: 30-150 mm, Drive power grinding spindle: 4.0 kW, Spindle speed grinding spindle: 2000 rpm,, speed of the cylindrical grinder: 1500 rpm., cutting wheel diameter: Max. 200 mm, Electrical connection: approx. 7 kW (400 V / 50 Hz), Dimensions L x W x H: 2000 x 1500 x 1500 mm, mass: approx. 1,600 kg, colour: gray RAL 7035, Dimensio ...

Grinding wheel dimensions (od x id x width): Ø350 x 125 mm, Ø min/max to be rectified: 1.5 - 50 mm, Regulating wheel dimensions (od x id x width): Ø220 x 125 mm, Grinding wheel width: 125 mm, Maximum length to be rectified in plongeé: 120 mm, Grinding wheel head motor power: 10 HP, Total power: 8,5 Kw, Weight: 1.500 kg

Surface grinding machine ELB type SW 3 HA JuwelMasch. No. 51810465 year of construction 1965Grinding area 300 x 150 mmClamping surface 300 x 150 mmElectromagnet 300 x 150 mmDistance spindle center - magnet approx. 350 mmGrinding wheel diameter 175 mmGrinding wheel width max. 25 mmGrinding wheel speed 2800 rpm. Grinding spindle drive 0.75 kWNetz connection 380 volts, 50 Hz.- manual and automatic table - transverse adjustment (0.02 mm per graduation) - manual transverse adjustment via handwheel, travel distance per handwheel revolution, Y -

: 1000 x 600 mm magnetic plate size: 1000 x 600 mm grinding height: max 400 mm grinding wheel width x diameter: 400 x 60 x 127 mm dimensions: 3900 x 20 50 x 2400 m : ja weight of the machine ca.: 6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.