136,470 used machines on RESALE, but how to find them? Machine Search
For sale is a used long belt sander (The machine is in the preliminary stage, photo is of a similar machine) Manufacturer: Kuhlmeyer Model: ZBS Year of Make: 2003 Working Area: 3,000x800mm Band size: 9,000x100mm Included: Grinding table height-adjustable, 5-axis workpiece handling device, swap shelf and a supply of belts If you have any further questions, please call or write to us!
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 2-6 - DP 12,4 - EW 20° - HBR=2.500 - ID-Nr. 69629_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com ...
quantity: 2 STK Dr. Kaiser Diamant Abrichtscheibe Modul 1,5 - EW 15° - HBR=1000 - ID-Nr. 69667_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free version) The data ...
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 3.25 DP max. 7,8 - EW 20° - HBR=1200 - ID-Nr. 69234_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.c ...
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 3.25 - DP max. 8 - EW 20° - HBR=1200 - ID-Nr. 69693_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.c ...
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 2,5 - DP 10,2 - EW 20° - HBR=1000 - ID-Nr. 69631_01 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com ...
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 3.25 - EW 20° - HBR=300 - ID-Nr. 69604_2 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free vers ...
quantity: 2 STK Diamant Abrichtscheibe Modul 1,5 - 3 - EW 15° - HBR=300 - ID-Nr. 69604_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free version) The data for thi ...
quantity: 1 STK Diamant Abrichtscheibe Modul 2.75 - EW 17.5° - HBR=2500 - ID-Nr. 85551020_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free version) The data for ...
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 3.25 - DP max. 8 - EW 20° - HBR=600 - ID-Nr. 69711_1 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.co ...
quantity: 2 STK Winter System Reishauer - Diamant Abrichtscheibe Modul 3.25 - EW 20° - HBR=1200 - ID-Nr. 69004_2 The classic” process for dressing grinding wheels grinding wheels in all areas of mass production the workpiece geometry-based profile roller. The short dressing times due to radial plunging of the grinding wheel grinding wheel into the dressing roll help to achieve fast and reproducible workpiece dressing. reproducible workpiece application. All conventional abrasives and, in special applications hard abrasives in special applications. For filigree workpiece geometries or materials that are difficult to cut materials that are difficult to cut, continuous CD dressing (continuous dressing) is often used. - Thread - Turbine blades - Bearing seats - Bearing raceways - valves - nozzle needles - shear blades - gear wheels - Twist-free surfaces Translated with DeepL.com (free ver ...
Distance between points: 1000 mm, Ø max to be rectified: 350 mm, Max travel Z axis: 1.180 mm, Max travel X axis: 350 mm, Height of points: 180 mm, Ø max to be rectified with the left wheel: 350 mm, Left grinding wheel dimensions (od x id x width): Ø450xØ203x80 mm, Working wheel dimensions (od x id x width): 508x203.2x80mm, Right grinding wheel dimensions (od x id x width): Ø300xØ127x40 mm, cnc brand: FANUC, cnc model: 18TC, Main engine power: 7.5 Kw, Maximum weight between points: 120 Kg, Total installed power: 15 KW, Standard peripheral speed: 45 m/s, Automatic grinding head rotation with Hirt 2.5º: +5º_-180º, B axis control system: Incremental encoder + 2.5º Hirt ring, B axis motor: 2.5 Nm at 3000 rpm, X axis speed: 10,000 mm/min, X axis resolution: 0.0005 mm, Z axis speed: 10,000 mm/min, Z axis resolution: 0.005 mm, Z axis table rotation: 0º_9º, Workpiece head cone: MORSE ...
grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 500mm grinding wheel diameter New servomotors in x and for the workhead. Photo of already delivered machine in UR equipment. -Operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original original control system, so there is no need for training. -Diagnostic function with display of PLC information and digital I/O -Dressing function can be extended or changed at the customers request. -Oriented spindle stop of the workpiece spindle possible on request. -New maximum infeed of 40 mm can be extended on request. -Digital display in 2 axes. Resolution x-axis 0.5my Options: -Rotary encoder with digital display in the workpiece headstock -Rotary encoder with digital disp ...
For sale is a pulverizer that was previously used for fine grinding trials in the food sector. The machine is robust, reliable and powerful. Specifications: + Power: 7.5 kw + Processing capacity: 20-50 kg per hour + Weight: 450 kg Using liquid nitrogen, the machine is ready for immediate use. Just plug it in and get started. It is still in mint condition and can be restored by arrangement can be visited. The machine is sold plus 19% sales tax. If you are interested or have any questions, we look forward to hearing from you.
HERBOLD Fine Mill PU800 Suitable for soft to medium-hard materials Previously used for plastic fine grinding Grinding discs diameter 800 mm Drive motor 90 kw
Offer 14044 Specifications: - 2-fold side edge belt sanding device - Sanding belt dimensions approx. 620 x 20 mm - Grinding equipment adjustable by handwheel - Support belt motor-driven - Support band dimensions approx. 2050 x 350 mm - Tilt-adjustable support strap - Table height approx. 950 mm -Mot. Grinding dust extraction - Drive 400 V - Space requirement approx. W 1100 x H 1450 x D 950 mm - Weight approx. 200 kg
IMEAS grinding cabin RCI/160 - RCS.2T/160 consisting of a lower and an upper satin finishing machine with two rollers.
vailable Harmonisation machine for grinding unbalanced PCR_Tyres Description attached! CE-certified
table surface area: 600 x 250 mm control: Siemens - SINUMERIK travel -x axis: 660 mm travel -y axis: 360 mm travel -z axis: 280 / 275 mm Surface Grinding Machine | JUNG - J 630 E The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: J630E | J630 E | J 630-E | J-630 E The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding range: 600 x 300 x 400 mm magnetic plate size: 600 x 300 mm distance spindle center to table: 5500 mm max. table load: 250 kg grinding wheel speeds: 1.900 U/min longitudinal feed: 680 mm cross travel: 245 mm Surface Grinding Machine | STÖCKEL - FX 6030 ST-2 The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FX6030 | FX-6030 | FX6030ST | FX 6030 ST The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Long belt sanding machine Höfer Long belt sander Höfer approx. 1000 x 2500 mm Machine is FUNCTIONAL and ready for demonstration from PENSION/Handicraft business From the carpentry site, as seen NET € 1,500.00
Distance between points: 1100 mm, Center height: 175 mm, Maximum diameter to be rectified: 270 mm, Maximum piece weight: 135 Kg, Working wheel dimensions (od x id x width): Ø508xØ304.8x80 mm, Main engine power: 7.5 Kw, numerical control: Fanuc 21 Oi-T
grinding diameter: 1000 mm grinding length: 2000 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Grinding wheel width: 125 mm, Control type (cnc/manual): Manual, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, No. of regulating wheel speeds: infinite, Regulating wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1520 mm, Width: 1020 mm, Tall: 1260 mm, Weight: 1600 Kg
Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg
grinding length: 1000 mm grinding width: 375 mm workpiece height: 375 mm total power requirement: 9 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 0/ mm grinding length: 960 mm feed in: mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 0/ m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 600 mm grinding width: 300 mm workpiece height: mm total power requirement: kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 2,9 x 2,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min/max to be rectified: 1.5 / 120 mm, Regulating wheel width: 254 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 10/250 rpm, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Hydraulic motor power: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 2.300 mm, Width: 1.885 mm, Tall: 1.900 mm, Weight: 6.420 kg
Workshop overhauled 2024, ready-to-use DISKUS Doppelplan grinding machine, Lower grinding spindle renewed 2024 Machine No. 7078 Specifications: Grinding spindle 2 pieces vertical Workpiece width 5 - 30 mm Max. workpiece height 10 mm Grinding wheel diameter 300 mm Dimensions of grinding tools Ø 300 x 50 x Ø 75 mm Rotational speed grinding wheel 18 m/s Speed 1150 rpm Lower grinding spindle frequency-controlled Machine weight approx. 2.3 t Accessories: IONIC process control, FAUDI water basin with magnetic separator Replacement flanges, transport washers The machine can be viewed by appointment in our factory in Krefeld. Price ACTUAL condition from stock: on request – Errors, changes and prior sale excepted –
grinding length: 600 mm grinding width: 400 mm workpiece height: mm total power requirement: 11 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Total power: 38 KVA, Max. length to be rectified: 800 mm, Height of points: 150 mm, Max. piece weight: 80 Kg, Working precision: IT4 ISO, Dimensions of the external grinding wheel: Ø400xØ127x63mm, Max width of grinding wheel: 63 mm, Power of outdoor grinding wheel: 7.5 Kw, Grinding wheel rotation speed: 45 m/s, Max travel X axis: 350 mm, Workpiece head cone: MORSE 5, Workhead spindle speed: 0-1000 rpm, Swivel angle of the working head: 90º, Tailstock cone: MORSE 4, Tailstock stroke: 90 mm, Max travel Z axis: 1000 mm, Table adjustment angle: +/- 8º 30, CNC control: SIEMENS, cnc model: 840 D
Inv. Num. : 8043 Type: ML 100 3Z Producer: NS MAQUINAS Created: 2017 Parameters: Max. workpiece diameter: 10-114 mm Minimum length of the workpiece: 335 mm Number of sanding belts: 6 pieces Abrasive belt speed: 10-30 m/s Sanding belt dimensions: 50 x 940 mm Weight: 600 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 127 mm -Outside: Ø 375 mm -Width: 20 mm -Price: per piece -Number: 1x available -Weight: 3.6 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 127 mm -Outer: Ø 403 mm -Width: 15 mm -Price: per piece -Number: 1x available -Weight: 3.6 kg
Grinding wheel, cup wheel, double grinding stand, surface grinding machine, cylindrical grinding machine -Inside: Ø 127 mm -Outside: Ø 400 mm -Width: 10mm -Price per piece -Quantity: 1x piece available -Weight: 2kg
Grinding wheel, cup wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 127 mm -Outer diameter: Ø 400 mm -Width: 10 mm -Quantity: 1 available -Weight: 2.2 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 189 mm -Width: 16 mm -Price: per piece -Number: 1x available -Weight: 1.1 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 6 mm -Price: per piece -Number: 2x available -Weight: 0.4 kg
Make: YOUNG Type: JF 520 Year of construction 1992 Machine weight : 2200Kg Total weight: 2600kg Location : Haiger Price: 24.000 € excl. VAT. Description: Digital display, Fabr. Heidenhain, microprocessor control, profiling device, Fabr. Diaform, Machine Lighting, Coolant System, Sine Magnetic Clamping Table, Fabr. Jung, type SM 50 Specifications: Clamping surface (L x W in mm) 600 x 200 Grindable surface (L x W in mm) 600 x 250 Magnet size max. mm 600 x 200 Grinding wheel dimensions max. mm 225 x 25 x 51 Distance table/spindle center mm 350 (+50) Table longitudinal feed pendulum m/min 1 – 20 Creep gear mm/min 0 – 500 Grinding spindle drive speed rpm 800 – 4200 Power kW (w/creep gear) 2.2 (3.5)
used
Max. grinding diameter 200 mm Max. sanding length 600 mm Max. workpiece weight 60 kg Device for internal grinding: no Machine dimensions L x W x H 2100x1800x1500 mm Machine weight 2300 kg Center width 600 mm
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51mm -Outer: Ø 250 mm -Width: 39 mm -Price: per piece -Number: 2x available -Weight: 4.2 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 190 mm -Width: 32 mm -Price: per piece -Number: 1x available -Weight: 1.4 kg
Workspace Workpiece, weight (max.) 270 kg Distance spindle nose - table surface 580 mm Table dimensions 635 mm x 305 mm Dimensions magnetic clamping plate 600 mm x 300 mm Scale ring pitch Y-axis 0.005 mm Scale ring pitch Z-axis 0.02 mm Auto. Transverse Feed Z-Axis 0.1 mm - 8 mm Speed 1450 1/min Auto. Vertical feed 0.005 mm - 0.05 mm Travel X-axis travel 765 mm Y-axis travel 340 mm Feed hydr. Feed X-axis 7 m/min - 23 m/min Rapid traverse Y-axis 480 mm/min Rapid traverse Z-axis 990 mm/min Drive power Motor power main drive 4 kW Dimensions and weights Grinding wheel dimensions 350 mm x 40 mm x 127 mm Dimensions (length x width x height): 2.9 m x 2.2 m x 1.9 m Weight 2800 kg
Workspace Workpiece, weight (max.) 500 kg Table dimensions 813 mm x 406 mm Distance spindle nose - table surface 580 mm Dimensions magnetic clamping plate 800 mm x 400 mm Scale ring pitch Y-axis 0.005 mm Scale ring pitch Z-axis 0.02 mm Auto. Transverse Feed Z-Axis 0.1 mm - 8 mm Speed 1450 1/min Auto. Vertical feed 0.005 mm - 0.05 mm Travel Travel X-axis 910 mm Y-axis travel 450 mm Feed hydr. Feed X-axis 7 m/min - 23 m/min Rapid traverse Y-axis 480 mm/min Rapid traverse Z-axis 990 mm/min Drive power Motor power main drive 4 kW Dimensions and weights Grinding wheel dimensions 350 mm x 40 mm x 127 mm Dimensions (length x width x height): 3.6 m x 2.4 m x 1.9 m Weight 3400 kg
Specifications Center width mm 1000 Tip height mm 300 Grinding length mm 1000 Workpiece weight between tips kg 800 Load on the workpiece spindle during on-the-fly grinding Nm 200 X-axis - infeed movement Feed speed mm/min 0.01-8000 Linear measuring system, internal resolution mm 0.0001 Z-Axis - Table Movement Table speed mm/min 0.01-8000 C-axis - workpiece headstock Speed min-1 0-300 Drive power kW 5 Pick-up taper MK 5 / KK 6 Grinding spindles Power grinding spindle motor with water cooling kW 15 Grinding wheel circumferential speed m/s 35 (63) Grinding wheel, standard mm 600x80x203.2 Tailstock MK 5 pick-up taper Workpiece Tension Spring Hydraulic Retraction
Key data: 1300 mm, 4 , 150 mm
WIDE BELT GRINDING AND CALIBRATION MACHINE Technical details: Working width: 1300 mm Max. workpiece thickness: 150 - . 4.0 mm Sanding belt dimensions: Circumferential mm Machine dimensions LxWxH: 4.8 x 2.7 x 2.35 m Drive 219 kW Year of construction 1992/2004 For woodworking! Other features: - Pneumatic belt guide - Height adjustment by handwheel - EMERGENCY STOP switch - Grinding roller adjustment - Belt tensioner - Roller conveyors (infeed and outfeed per L: 2800 x W: 1700 mm with 6 rollers each) motor-driven - Control panel operation - Workpiece thickness min./max.: 4.0/150mm - Sanding belt belt width 1300 mm (belt circulation) - Sanding belt support lengthxwidth: 1700/1350 mm
Ø of the working wheel: 300 mm, Maximum working height: 170 mm
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 175 mm -Width: 20 mm -Price: per piece -Number: 1x available -Weight: 1.1 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 28 mm -Outer: Ø 175 mm -Width: 6 mm -Price: per piece -Number: 2x available -Weight: 0.3 kg
maximum number of results exceeded
please refine your search
