gear grinder used for sale

Bench grinder attachment IMEP 0.55 kW speed: 2775 rpm voltage: 220/ 380 V degree of protection: IP 44 approx. 5 m connection cable shaft: Ø 27 / 42 mm used, tested ! Dimensions: 465 x 200 x 345 mm

Double bench grinder, brush deburring machine, deburring machine VEM, ELBTALWERK SEWStN40SEN350 disc diameter Ø 350 / 350 mm Disc width 63 / 40 mm with a wire brush ! 1.5 kW 1500 rpm 220 / 380 V used, tested ! Dimensions: 1400 x 800 x 1250 mm

Rectificadora sin centros GOZUA RC 2-75

Double bench grinder GISAG SE 2x400/1 TGL 24500 Disc diameter: Ø max 400 mm 4 kW 380 V Protective cover is missing !' used, tested !' Dimensions: 1100 x 700 x 1200 mm

Diámetro de la muela principal 250 mm Diámetro de la muela auxiliar 200 mm Unidad de diamantado Esmerilado de alimentación pasante Filtro de papel Diámetro máximo: 50 mm

angle grinders, high-frequency tools, high-frequency machines BOSCH 0 602 306 001 0.95 KW 1100 rpm 265 V 200 Hz connection cable approx. 4 m used, tested ! untested ! Dimensions: 600 x 300 x 150 mm

Hydraulic clamping table, Automatic wheel balancer, Fairing, Hydraulic working wheel cover, AEROEL measuring equipment, Hydraulic table clamping, Hoist for 1,000 kg, Electric cabinet cooling, Pneumatic box, Coolant transfer tank, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Automatic - CNC, Diamond dressing speed: 255 r.p.m., Lubrication (auto / manual): Automatic, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 mm, High: 2.100 mm, Weight: 15 ...

angle grinder, high-frequency tool, high-frequency machines BOSCH 0 602 306 001 0.95 KW 1100 rpm 265 V 200 Hz connection cable approx. 7 m used, tested ! untested ! Dimensions: 600 x 350 x 150 mm

CNC, automatic balancer of wheels Balance Systems, speed variator in the grinding wheel, speed variator in the grinding wheel / CNC, automatic balancer of wheel Balance Systems, Speed ​​variator of Grinding Wheel, Speed ​​variator of Regulating Wheel,, Ø grinding wheel dimensions (od x id x width): 610 mm, Ø min / max to grinding: 1.5 - 120 mm, Peripheral grinding wheel speed (m / s): 35 m / sec, Regulating wheel width: 254 mm, Min / max regulating wheel speed (r.p.m.): 10-300 RPM, Cnc brand: FANUC, Cnc model: Power Mate - iH, Cnc axes nº: 3 + spindle, Regulating wheel dimensions (od x id x width): 305 x 127 mm x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Motor power grinding wheelhead: 22 kW, Total power: 35 kW, Voltage: 220/380 V, Long: 4,795.5 mm, Width: 3.806 mm, High: 2.355 mm, Weight: 6.450 kg, Accessories included: CNC, automatic bal ...

Pneumatic grinder, pneumatic straight grinder WMW type 1804 17000 rpm grinding wheel diameter: Ø 50 mm with approx. 1.6 m connection hose used, tested ! Dimensions: 330 x 50 x 80 mm

Automatic wheel balancer, coolant filter, ruler and grinding and grinding wheel | automatical wheel balacer, coolant filter, blade and blade support grinding wheel, Ø grinding wheel dimensions (od x id x width): Ø610 x Ø304.8 x 355 mm, Ø min / max to grinding: 2/150 mm, Regulating wheel width: 355 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 20/460 r.p.m., Dressing (auto / manual): Automatic - CNC, Lubrication (auto / manual): Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi Mate - TD, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): Ø350 x Ø203.2 x355 mm, Grinding wheel width: 355 mm, Maximum infeed grinding length: 355 mm, Coolant system motor power: 0.70 Kw., Motor power grinding wheelhead: 37 Kw., Total power: 45 Kw., Voltage: 220/380 Kw., Long: 1.165 mm, Width: 3.3 ...

Mixer - Grinder KOLBE Type: MWE 32 Diameter: 100mm Chopper volume: 120l Capacity for 3 mm: 1400 kg/h Mixing speed: 24 rpm/min Power main motor: 5,5 kW Power mixing motor: 1,1 kW Dimensions: 1250 x 800 x 1350 mm Weight netto: 480 kg Condition: Used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Enrolling rule holder, Grinding discs, Speed variator for the grinding wheel, OPTIONAL cooling: Fairing, Automatic centralized greasing, CNC 1 Year Warranty / Porta enfile rules, Saucers wheel holder, Refrigeration equipment OPTION: Protection,, automatic lubrication system, CNC, 1 year warranty, Ø grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min / max to grinding: 1.5 / 100 mm, Ø min / max to rectify: 1.5 / 100 mm, Regulating wheel width: 200 mm, Min / max regulating wheel speed (r.p.m.): 10/250 rpm, Min / max speed of regulating wheel (r.p.m.): 10/250 rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Maximum infeed grinding length: 200 mm, Maximum length to be rectified in plongeé: 200 mm, Motor power grinding wheelhead: 15 kW, ...

Plongee automatic hydraulics, Refrigeration equipment, Plongees knife, Cymbal grinder, OPTIONAL: Lead-in grinder, CNC, Fairing, Gearbox elimination and Adaptation of speed variator for drag wheel, Automatic centralized lubrication, 1 Year Warranty / Plongee automatic hydraulic, refrigeration equipmentPorta plongee rules, Saucers wheel holder, OPTION: Porta rules enfilade, cnc, protection, eliminating gearbox and variable speed adjustment for wheel drive, 1 year warranty, Ø grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min / max to grinding: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel speed nº: infinite, Control type ((cnc / manual): Manual, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Maximum infeed grinding length: 125 mm, Motor power grinding whee ...

Surface grinding machines with rotary table and horizontal grinding spindle Table dia: 700 mm Table can be inclined! High accuracies Rigid casting design Hydrostatic guideways in the X-axis and the rotary table Outstanding long-term precision and longevity Ergonomic and easy to operate compact and space saving design Best damping properties Direct, wearless drive in the rotary table

Plongee Portfolio, Cymbal Ports, Speed ​​variator for the traction wheel OPTIONAL: Lead-in slide, CNC, Fairing, Automatic centralized greasing, 1 Year Warranty / Porta plongee rules, Saucers wheel holder, OPTION: Porta rules enfilade, cnc, protection,, automatic lubrication system, 1 year warranty, Ø grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min / max to grinding: 1.5 / 100 mm, Regulating wheel width: 200 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 0/450 rpm, Lubrication (auto / manual): Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi Mate - TF, Infeed (auto / manual): Automatic, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Maximum infeed grinding length: 200 mm, Motor power grinding wheelhead: 15 kW, Long: 2020 mm, Width: 1 ...

Description Feeding mouth size: 210 mm x 415 mm Cutting Chamber Size: 200 mm x 420 mm Engine power: 3 Kw Rotating Blades: 3 Fixed blades: 2 Grid Hole Size: 5 mm Approximate production: 50 - 80 Kg/h Material Extraction: Collection drawer with suction hole.

Intern frame clamp, 1000Kg hoist, grinding shaft repaired with ceramic, repaired drive shaft, fairing, CE / Porta rules rules, 1000 Kg hoist, shaft rectify repaired ceramics, trailing axle repaired, fairing, CE, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Automatic / Automatic, Diamond dressing speed: 255 r.p.m., Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi Mate - TD, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Pow ...

Description Inlet size: 480 mm x 600 mm Cutting Chamber Size: 410 mm x 600 mm Engine power: 18.5 kW Rotating blades: 3 Fixed blades: 2 Grid hole size: 10 mm Material extraction: collection drawer with hole for suction. Electrical panel with soft start, new blades.

Intern table clamp, 1000Kg hoist, Fairing, CE | Throughfeed work rest, block and tackle for 1.000kg, Machine casing, CE, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Automatic / Automatic, Diamond dressing speed: 255 r.p.m., Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi - TF, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 m ...

Description Inlet size: 450mm x 350mm Cutting Chamber Size: 450mm x 380mm Engine power: 18.5 kW Rotating blades: 3 Fixed blades: 2 Grid hole size: 8 mm Drawer Material: Drawer New grille and belts, ground blades New grille and belts, ground blades

Hydraulic automatic plongee, plongee bowler, grinders, OPTIONAL: lead, CNC, fairing, gearbox elimination and speed variator adaptation for drag wheel, automatic centralized lubrication, 1 Year Warranty / Plongee automatic hydraulic, Porta plongee rules, Saucers wheel holder, OPTION: Porta rules enfilade, cnc, protection, eliminating gearbox and variable speed adjustment for wheel drive, 1 year warranty, Grinding wheel gap : 1.5 / 50 mm, Max.width of wheel in feed grinding : 125 mm, Working wheel dimensions (od x id x width) : 325 x 175 x 125 mm, Øext.min. working wheel : 220 mm, Max. profile depth of the working wheel: 8 mm, Infeed (auto / manual): Automatic / Automatic, Driving wheel dimensions (od x id x width) : 220 x 125 x 125 mm, Øext.min. driving wheel : 165 mm, Working wheel motor power : 7,5 Kw, Driving wheel motor power: 0.75 Kw, Angle of inclination of the working grinding he ...

Description Feeding Mouth Size: 600 x 350 mm Cutting Chamber Size: 600 x 430 mm Motor Power: 22 Kw Suction Power: 2.2 Kw Rotating Blades: 3 Fixed Blades: 2 Grid Hole Size: 7 mm grid mounted + 10 mm grid supplied Output: 800 Kg/h Material Extraction: suction with cyclonic filter with replacement blade kit

Portoner of plongee, Cymbals portaamuelas, CNC FANUC, Centralized automatic grease OPTIONAL: Portarrels of enfilada, Fairing, Removal of gearbox and adaptation of variator speed for drag wheel, 1 Year Warranty / Porta plongee rules, Saucers wheel holder , CNC FANUC, Automatic lubrication system. OPTION: Porta rules enfilade, protection, eliminating gearbox and variable speed adjustment for wheel drive, 1 year warranty, Ø grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min / max to grinding: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel speed nº: infinite, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi - TF, Infeed (auto / manual): Automatic / Automatic, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Maximum infeed grinding length: 125 mm, Motor power grinding wheelhead: 7,5 Kw, Lo ...

Inv. Num. : 8331 Type: SKR 1200-NC Producer: REFORM Created: 1995 Parameters: Control system: Siemens SINUMERIK Max. workpiece diameter: 1200 mm Maximum length of the workpiece: 1000 mm Max. workpiece weight: 300 kg Max. speed: 1000 1/min Length: 2500 mm Width: 1500 mm Height: 1800 mm Weight: 4000 kg

Intern feeder, Automatic feeder with Allen Bradley PLC, MARPOSS process measurement equipment / Automatic feeder with Allen Bradley PLC, Team process measurement MARPOSS, Internal inter-regulation, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 0.37 kW, Total power: 65 kW, Voltage: 220 / 380V, Long: 2.300mm, Width: 2.800mm, High: 2.100mm, Weight: 15.000 kg, Accessories included: Intern feeder, automatic feeder with Allen Bradley PLC, MARPOSS process measuremen ...

The machine is in good condition. Technical data: 130mm hole plate diameter 1 speed working pulley 1 speed feed screw 130 litre tank capacity Width: 1250 mm Depth: 1000 mm Height: 1550 mm Installed power: 11,0 kW, 23 A Voltage: 380 V, 50 Hz

Key data: 1100 mm

DMC Polisand 110 RP wide belt sanding machine year 1998 Varnish Wide belt sanding machine total installed power approx, 23 KW Sanding width 1100 mm Workpiece thickness up to approx, 170 mm Motorized height positioning with digital reader Vacuum transport belt, F,LLI FERRARI vacuum unit with motor power 4 KW Feed motor power 1,50 KW Aggregate 1: grooved rubber sanding roller, with blowers Aggregate 2: sanding pad, with blowers Both groups are driven by an 15 KW motor 380 V / 50 Hz weight 2300 Kg Dimensions: 2,45m x 1,85m x 2,0m

Meat grinder WD 114 Seydelmann Stainless steel Two speeds V-belt drive Voltage: 6kW Electric power: 400V / 50Hz

: ja : 094089 spindle speeds:: linka 2100 weight of the machine ca.: 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: . mm grinding width: . mm workpiece height: . mm Table: 870x130 mm total power requirement: 2,5 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2x1x2 m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surface Grinding Machine Aba FF450/30 BJ 1980

Surface Grinding Machine Manufacturer: Jung Type: JA 500 CNC-C Year of Make: 1995 Overhauled in: 2003 Grinding length: 500 mm Grinding width: 200 mm Max. workpiece height: 250 mm Table dimensions X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Speed: 4,200 rpm Machine weight: approx. 2,500 kg

Grinding wheel dimensions (h x w x d x w): Ø 508 x Ø 305 x width 655 mm, Ø min/max to be ground: 5/240 mm, Min/max speed of regulating wheel (rpm): 0/115 rpm, Type of control (cnc/manual): manual, In feed Grinding (auto/manual): manual, Dimensions of the regulating grinding wheel (h x w x d x w): Ø 330 x Ø 203 x width 655 mm, Maximum length to grind in feed grinding: 655 mm, Grinding wheel head motor power: 45 hp, Total power: 60 HP, Length 3.000 mm, Width 1.400 mm, Height 1.600 mm, Weight 11.500 Kg

Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Longitudinal auto, manual penetration of both grinding wheels, Cnc axes nº: 1, Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 mm, Accessories included: Grinding wheel balancer, plongeé rule holders / Grinding wheel balancer, plongeé rule holders., High: 2.100 mm, Weight: 15.000 Kg

Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Working wheel dimensions (od x id x width): 325x175x125mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Øext.min. driving wheel: 165mm, Working wheel motor power: 7,5Kw, Driving wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

Ø max working wheel: 508, Ø min. working wheel: 380, Ø inside working wheel: 254 (305), Working wheel width: 205, Ø max. drive grinding wheel: 305, Ø min. drive grinding wheel: 230, Ø inside grinding wheel: 152.4, width of feed wheel: 205, Cutting speed: 30-45-60 m/s, R.p.m. of the driving wheel: 0-300, Diamond speed: 300, working wheel motor: 15 Kw (18Kw), Driving wheel motor: 10.4 Nm, Dimensions WxLxDxH: 2250x3380x2385, Weight: 9000Kg, CNC Brand: SIEMENS, CNC Model: 840 D, Number of CNC axes: 11

TECHNICAL INFORMATION:, Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm, Dimensions of the regulating grinding wheel (od x id x width): Ø304,8xØ152.4x204 mm, Main motor power: 20 Kw, Voltage: 380 V, Height: 1700 mm, Length: 2000 mm, Width: 1080 mm, Weight: 4315Kg approx. machine and 60 Kg box

Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Working wheel dimensions (od x id x width): 325x175x125mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Øext.min. driving wheel: 165mm, Working wheel motor power: 7,5 Kw, Driving wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

Ø grinding wheel dimensions (od x id x width): Ø650xØ304.8x500 mm, Ø min / max to grinding: 3/200 mm, Peripheral grinding wheel speed (m / s): 35 m / s, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/225 rpm, Dressing (auto / manual): Automatic CNC the two wheels, Diamond dressing speed: infinite 10/225 rpm, Lubrication (auto / manual): automatic, Control type ((cnc / manual): CNC, Cnc axes nº: 6, Infeed (auto / manual): Automatic CNC, Regulating wheel dimensions (od x id x width): Ø355xØ203,2x500 mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Weight: 14,000 Kg machine + peripherals, Accessories included: Fairing, hydraulic work cap, hydraulic ruler / Machine casing, hydraulic cover of the grinding wheel, hydraulic workrest

Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325 x 175 x 125 mm, Øext.min. working wheel: 220 mm, Max. profile depth of the working wheel: 8 mm, Lubrication (auto / manual): Manual, Control type ((cnc / manual): Manual, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Long: 1520 mm, Width: 1020 mm, High: 1260 mm, Weight: 1550 Kg, Driving wheel motor power: 0.75 Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 2.300 mm, Width: 1.885 mm, High: 1.900 mm, Weight: 6.420 kg, Accessories included:

Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Longitudinal auto, manual penetration of both grinding wheels, Cnc axes nº: 1, Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 mm, Accessories included: Grinding wheel balancer, plongeé rule holders / Grinding wheel balancer, plongeé rule holders., High: 2.100 mm, Weight: 15.000 Kg

Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Peripheral grinding wheel speed (m / s): Variable with regulator, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Dressing (auto / manual): Automatic CNC the 2 grinding wheels, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Lubrication (auto / manual): Automatic, Control type ((cnc / manual): CNC, Cnc axes nº: 8, Infeed (auto / manual): Automatic, Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 75 Kw, Power hydraulic motor: 3 Kw, Accessories included: Fairing, rule holder and plongeé, MARPOSS E50 meter, speed regulator. grinding wheel work, Total power: 90 Kw, Voltage: 220 / 380V, Lo ...

High: 1.400 mm, Long: 1.650 mm, Width: 1.000 mm, Weight: 2.480 kg, Voltage: 380 V, Cnc brand: -, Cnc model: -, Total power: 8 Kw, Cnc axes nº: -, Grinding wheel width: 125 mm, Diamond dressing speed: adjustable, Infeed (auto / manual): AUTOMATIC, Regulating wheel width: 125 mm, Dressing (auto / manual): Hydraulic / Manual, Ø min / max to grinding: 1/75 mm, Regulating wheel speed nº: infinite, Lubrication (auto / manual): Car, Control type ((cnc / manual): MANUAL, Maximum infeed grinding length: 125 mm, Peripheral grinding wheel speed (m / s): 30 m / s, Min / max regulating wheel speed (r.p.m.): max 350 r.p.m., Regulating wheel dimensions (od x id x width): Ø225 x Ø120 x 125 mm, Ø grinding wheel dimensions (od x id x width): Ø350 x Ø150 x 125 mm

Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325 x 175 x 125 mm, Øext.min. working wheel: 220 mm, Max. profile depth of the working wheel: 8 mm, Regulating wheel speed nº: infinite, Infeed (auto / manual): Automatic / Automatic, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Driving wheel motor power: 0.75 Kw, Long: 1520 mm, Width: 1020 mm, High: 1260 mm, Weight: 1550 kg, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Regulating wheel width: 254 mm, Regulating wheel speed nº: infinite, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dressing (auto / manual): Manual, Lubrication (auto / manual): Automatic / Automatic, Control type ((cnc / manual): CNC, Cnc brand: FANUC, Cnc model: Oi Mate - TD, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Power hydraulic motor: 0,55 kW, Total power: 27 kW, Voltage: 220/380 V, Long: 2.300 mm, Width: 1.885 mm, High: 1.900 mm, Weight: 6.420 kg, Accessories included: