gear grinder used for sale

scrubber-dryer, floor cleaning machine, mop, gearbox -Manufacturer: Gansow, gearbox from scrubber-dryer 70 BF 70 -Mat.No.: 40S 11 001 -Bolt circle: Ø 90 mm -Translation: i= 8:1 -Number: 2x gearboxes available -Price: per piece -Dimensions: 270/125/H125 mm -Weight: 4.7 kg/pc.

Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 70 -Motor: Gansow type MRP4DS 400 W 24 V 130 rpm -Dimensions: 610/250/H200 mm -Weight: 20 kg

Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 70 -Motor: Gansow type 13509 367 W 24 V -Dimensions: 660/360/H250 mm -Weight: 51 kg

: workpiece length - max.: mm max. module: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vernier caliper, vernier caliper, vernier caliper -Manufacturer: CSE, tooth width caliper sprocket caliper with fine adjustment -Measurement scale: 0-40 / 0-60 mm -Vernier: on both sides -Dimensions case: 175/155/H30 mm -Weight.: 0.5 kg

Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 70 -Motor: Gansow type 11500 1000 W 24 V -Transmission: Flender ZF 12 -Dimensions: 660/260/H150 mm -Weight: 43 kg

Due to new motorization, this Reintjes gearbox type WAF 763L with subzetsung 5.750: 1 half May 2026 is available The shooting hours is dan Umnabei 64.000

max. wheel diameter: 500 mm gear width: 200-400 mm module: 12 turning speeds: 0-3250 U/min bracke pressure: bis max. 95 Nm inner taper: Konus #39 Control: Fanuc 16 total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1250 mm gear width: 600 mm max. module: 16 min. module: 2 tooth width: 490 mm Zahnschrägungswinkel max.: 45 ° shifting: 200 mm max. number of teeth: 12 diameter of hob: 240 mm cutter length max.: 280 mm table diameter: 1020 mm milling spindle speeds (infinitely variable): 28 - 200 U/min power capacity: 25 kW weight of the machine ca.: 16,2 t dimensions of the machine ca.: 4,5 x 4,6 x 2,7 m equipped with: - universal hob head - change gears machine has been partly overhauled (electrical and machnical) and is now with programmable, digital Infeed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Adjustable gearbox, variable speed gearbox, spindle gearbox, DISCO variable speed gearbox -Manufacturer: Lenze, DISCO adjustable gearbox -Type: 11 511 03 00 0 -Speed range: 1000-167 rpm for motors up to 0.37 kW / 1380 rpm -Dimensions: 228/163/H185 mm -Weight: 13 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Motovario, gear motor type NHRV -Speeds: approx. 100 rpm -Manufacturer motor: DRdrives type 63A-2 -Power: 0.18 kW / 2720 rpm -Hollow shaft: Ø 14 x 60 mm -Dimensions: 288/155/H125 mm -Weight: 5.3 kg

max. wheel diameter: 2500 mm gear width: 750 mm max. module: 18 / 22 min. module: table diameter: 1800 mm min. number of teeth: 12 table hole: 300 mm hob turning speeds: 20 - 100 U/min table load: 10 t milling cutter dia. x width: 250 x 340 mm shifting: 150 mm feeds - tangential: 0,25 - 3 mm/min feeds - radial: 0,07 - 1,5 mm/min feeds - longitudinal: 0,55 - 3,5 mm/min milling feeds: 13,4 - 80 (Einzelteilen) mm/min total power requirement: ca. 30 kW weight of the machine ca.: 28 t - change gears, arbors, toolings, clamping plots - universal hob head - swiveling outer steady - single indexing device party overhauled in 2023 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Central lubrication unit, gear pump unit, MFE5-BW30+399, SKF, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - Minor damage to the level indicator plug without functional impairment. Technical data: - Central lubrication unit, MFE5-BW30+399, Vogel/SKF, new - Gear pump MFE5-2000+299, - 0.5 L/min, max. 28 bar, 230/400 V, 2700 rpm - 50 x 35 x 55 cm high - Includes level indicator - Includes level monitoring 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund th ...

Type M14 M.A. 16,2 EFFICIENCY 27% TURN TO CLOSE 15 RATIO 16:1 MAX IT 136 MAX OT 2200Nm

The machine is in good technical condition, testing is possible by prior arrangement.

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Nord, geared motor with brake -Type: SK 530SU-80S/4BRE8 -Speed: 93 rpm -Power: 0.55 kW / 1380 rpm -Shaft: Ø 25 x 45 mm -Protection class: IP54 -Brake: 8 Nm -Dimensions: 435/200/H240 mm -Weight: 21 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type SA37 DR63M4/TF/IS -Speed: 13 rpm -Power: 0.18 kW -Hollow shaft: Ø 20 x 100 mm -Protection class: IP55 -Dimensions: 340/180/H140 mm -Weight: 11 kg

Spiral bevel gear machine ZFTKK 500/3V. Some of the change gears missing

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type WA 30 DT71D4/IS -Speed: 29 rpm -Power: 0.37kw -Hollow shaft: Ø 20 x 100 mm -Protection class: IP54 -Number: 1x motor available -Dimensions: 340/145/H230 mm -Weight: 10.7 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type W20 DR63M4/TF/IS -Speed: 28 rpm -Power: 0.18kW -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 300/180/H120 mm -Weight: 7.6 kg

Condition NEW Brand Siemens Type CAF38 AK90LP4 Voltage Volt 1 chamfer 230 volt Power KW 1500 watt 1,5 KW 111 Nm RPM 95 RPM speed Shaft size mm 25 mm Version Version 32 kilo Units in stock 10 Length 50.00cm Width 25.00cm Height 18.00cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: STM, geared motor type RMI 50 D -Speed speeds: approx. 14 rpm i= 1/100 -Manufacturer engine: TeKell type M63B4 -Power: 0.187 kW / 1390 rpm -Shaft: Ø 24 x 90 mm -Dimensions: 210/215/H345 mm -Weight: 10 kg

Geared motor FARMER Type BF50-04/DHE11LA4 Volt 3 chamfer 400 volt 4 KW 56 RPM Hole 50 mm IE2 L 60.00cm W 30.00cm H 50.00cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Key data: 450

The Klingelnberg PEK 300 H bevel gear testing machine is designed for universal single-flank rolling testing of bevel gears and crown gears. Here, gears can be measured and graphically evaluated by means of single-flank rolling testing. These test methods are particularly suitable for determining defects in the gear geometry such as concentricity and axial running properties, rolling deviations or pitch errors. Here, a practical installation situation of a gear outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools and damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be measured here: » Single-flank deviations Fi', fi', fl', fk' » Crossing, Runout Roundness (Option) » Carrying diagram with digital camera » Pit ...

Farmer Type BG60-11/D11LA4 3 chamfer 400 volts 5.5 KW 58 RPM Shaft 50 mm L 75cm W 35cm H 35cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Key data: 540

The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of noise and contact pattern tests on bevel gears and hypoid gears. Technical data Diameter: 540 (400) mm Hypoid: ±50 mm mm Pinion spindle Dm: 90 mm mm Dimensions: 1,800 x 1,800 x 1,600 m Machine weight: approx. 2,800 kg Information and data are non-binding, subject to prior sale Special features: The machine is intended for noise and contact pattern tests on bevel and hypoid gears of all gears. By simulating operating conditions, applying different speeds and changing the load states for drive and outlet, the optimal installation distance for standstill can be determined. Digital actual value display for 2 axes Stepless speed adjustment via frequency converter Electrically fused and acceptable ...

elsto Type F603 UH60 P112 3 chamfer 380 volt 400 volt 3 KW 27 RPM Center 60 mm Center 230 mm L 70cm W 30cm H 60cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

SEW Eurodrive Type SA67 DT90L-4 ZFISITI 3 chamfer 400 volts 1.5 kW 26 RPM Shaft 40 mm L 52.00cm W 25.00cm H 25.00cm

Lenze Type G50BB111MHBR2C MDEMAXX063-42C0C 3 chamfer 400 volt (50 tot 87 Hz ) 0.25 kW / 0.45 kW ( 87 Hz ) 22.44 RPM to 40.6 RPM Hole 25 mm Shaft 30 mm Drive Unit type: E84DGDVB55142PS L 45cm W 20cm H 20cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: RF43 DT90S4/TH i=19.15 -Speed: 73 rpm -Power: 1.1 kW -Design: B5 -Shaft: Ø 25 x 50 mm -Protection class: IP 54 -Dimensions: 500/200/H110 mm -Weight: 25 kg

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor with brake -Type: ZG2 BMREB 80 K 4 -Speed: 80 rpm -Power: 1.1 kW -Design: B5 -Shaft: Ø 32 x 80 mm -Protection rating: IP 44 -Brake: 7.0 Nm -Dimension: 540/200/H260 mm -Weight: 33 kg

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor type Z2 KRA 80.2/6 -Speed: 20 rpm -Power: 0.25 kW -Design: B3 -Shaft: Ø 28 x 60 mm -Protection rating: IP 44 -Dimension: 415/190/H250 mm -Weight: 23 kg

LENZE MDEMA1M071-42 3 chamfer 400 volts 0.55 KW 7.8 RPM Hole 40 mm L 45cm W 35cm H 20cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor type Z2 KR 80.1/8 -Speed: 16 rpm -Power: 0.15 kW -Design: B3 -Shaft: Ø 28 x 60 mm -Protection rating: IP 44 -Dimension: 415/190/H250 mm -Weight: 22 kg

Gears, spur gears, angular gears, worm gears -Manufacturer: Chiaravalli, worm gear type CHM 75 B14 unused in original packaging -Translation: i = 15 -Hollow shaft: Ø 28 x 120/60mm -Dimensions of cardboard: 200/160/H240 mm -Weigh: 8.5 kg

Gears, spur gears, angular gears, worm gears -Manufacturer: Chiaravalli, worm gear type CH-04P NT unused -Translation: i = 10 -Hollow shaft: Ø 14 x 33 mm / 18 x 65 mm -Hole circle: Ø 87 x 9 mm -Dimension: 120/1285/H125 mm -Weight: 2.0 kg

max. wheel diameter: 1000 mm gear width: 200 mm max. module: 10 min. module: 0,5 max. dia. of teeth cutting: 1000 mm min. dia. of teeth cutting: 75 mm table diameter: 1000 mm boring diameter: 400 mm spindle stroke: 0 - 230 mm stroke position adjustment: 250 mm distance between table / ram: 480 / 730 mm dia. of shaper cutter: 8 Zoll taper: Morse 5 tool taper: 1 3/4 Zoll total power requirement: ca. 20 kW weight of the machine ca.: 11 t Standard version - Chip conveyor - Two additional tables with diameters of 850 mm and 1,500 mm - Several cutting tools - Set of interchangeable gears - Program for cutting in 1-2-3-4 passes/cycles - Program for spiral cutting - Several holders and clamps for workpieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8974 Type: OFA 16 SC Producer: TOS Generated: Parameters: Machine weight: 5 t

Gear hobbing machine TOS OF-71 with change gears

Gears, spur gears, angular gears, worm gears -Gear: Worm gear, unfortunately unused without type designation -Translation: i = 40 -Hollow shaft: Ø 11 x 23 mm / 14 x 67 mm -Hole circle: Ø 87 x 9 mm -Quantity: 3x gears available -Price per piece -Dimension: 100/100/H115 mm -Weight: 1.2 kg

Gear motor, electric motor, electric gear motor -Manufacturer: ABM Baumüller, geared motor type HSG5DFR/44D8556A-4 -Speed: 24.5 rpm -Power: 0.09 kW 1350 rpm -Design: B5 -Shaft: Ø 10 x 20 mm -Protection rating: IP55 -Dimensions: 245/130/H145 mm -Weight: 4.2 kg

Geared motor, electric motor, electric geared motor, angular geared motor, automatic band saw -Manufacturer: Flender Himmel, geared motor -Gearbox: Type ZF 10 i= 18.064 -Speed: 78 rpm -Engine: ERY 0.18/4-7 1390 rpm -Shaft: Ø 20 x 50 mm -Dimensions: 380/200/H210 mm -Weight: 11.5 kg

Condition Used Brand Siemens Type ZR88-LA132SP4EW Voltage Volt 3 fase 400 volt Force KW 5,5 KW - 137 Nm Rotational speed RPM 384 RPM Shaft size mm 60 mm Flens pasrand 250 mm Version Eigen gewicht 170 kilo Length 110.00cm Width 35.00cm Height 35.00cm Related Products All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)

Gear, gears, spur gear, spur gear -Manufacturer: PTI, gear, spur gear module 5 18 teeth -Type: M5 Z18 -Shaft holder: I pilot hole Ø 20 mm -Tooth width: 50 mm -Quantity: 2x gear available -Price per piece -Total dimensions: Ø 100 x 75 mm -Weight: 3.0 kg/pc.

Gear motor, electric motor, electric gear motor, spur gear motor, gear motor with brake -Manufacturer: SEW-Eurodrive, geared motor type RF17 DT71D4 -Speed: 55 rpm / i= 25.23:1 -Power: 0.37 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP54 -Dimensions: 380/200/H160 mm -Weight: 9,9 kg

Condition Unused Brand SEW-Eurodrive Type RX57 DRS71M4 / AND8 Voltage Volt 3 fase 380 volt 400 volt Force KW 0,55 KW Rotational speed RPM 364 RPM Shaft size mm 20 mm Length 40.00cm Width 23.00cm Height 20.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: SA77 DAS90S4/TF/IS -Speed: 1450/6.4 rpm i= 225.26 -Power: 0.55 kW -Hollow shaft: Ø 50 x 190 mm -Dimensions: 550/280/H300 mm -Weight: 69 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: KA37 DRN80M4/RS/TF/AL -Speed: 1435/24 rpm i= 58.60 -Power: 0.55 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP55 -Dimensions: 480/210/H170 mm -Weight: 22 kg

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, geared motor -Type: KA37 DAS100M4/TF/IS -Speed: 1445/41 rpm i= 35.57 -Power: 1.1 kW -Hollow shaft: Ø 30 x 120 mm -Protection rating: IP66 -Dimensions: 600/162/H255 mm -Weight: 43 kg

Condition New, old stock Brand SEW Eurodrive Type S37 DRN80M4/BE1/EI7C Voltage Volt 3 fase 400 volt Force KW 0,75 KW Rotational speed RPM 363 RPM Shaft size mm 20 mm Version Brake Length 51.00cm Width 21.00cm Height 15.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)