gear grinder used for sale

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: SEW Vector, geared motor -Type: R40 DT80K-4 -Speed: 224 rpm -Power: 0.55kW -Construction: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 54 -Dimensions: 460/190/H160 mm -Weight: 17,2 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: SEW Vector, geared motor -Type: SA47T DT80K-4 -Speed: 36 rpm -Power: 0.55 kW -Hollow shaft: Ø 30 x 120 mm -Protection class: IP 55 -Dimensions: 425/200/H260 mm -Weight: 21 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Nord, gear motor type SK 0-63L74-016 Speed: 148 rpm -Power: 0.18 kW -Shaft: Ø 16 x 40 mm -Protection class: IP44 -Dimensions: 340/130/H170 mm -Weight: 9 kg

Geared motor, electric motor, electric geared motor -Manufacturer: ABI, Geared motor type WDF271x -Speed: 25 rpm / i=1:59 -Power: 0.12 kW -Shaft: Ø 20 x 20 mm -Protection rating: IP55 -Dimensions: 310/165/H185 mm -Weight: 9.5 kg

Hydraulically switchable gearbox for change of direction of rotationHydraulic reverse gear of latheYear of construction approx. 1985Alternating gearbox for fast change of direction of rotationClockwise or counterclockwise rotation- electric hydraulic pump for hydraulic pressure generation (380 volts, 0.25kW)- 2 pieces of solenoid valves for switching from left to clockwise rotation- equipped with pulleys 230 and 200 mm- was driven by a 15 KW drive motor, fast change of direction of rotation with high torque transmission- Drive motor always runs on the right, gearbox is hydraulically activated

Geared motor, electric motor, electric geared motor -Manufacturer: Motovario gearbox type NMRV/030 -Speed: 91 rpm i 15.0 -Engine: Neri Motori type T56B4 -Power: 0.09 kW / 1360 rpm -Hollow shaft: Ø 14 x 60 mm -Protection rating: IP55 -Dimensions: 265/110/H155 mm -Weight: 4 kg

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, gear motor type ZG2 KMR 80 K 4 -Speed: 80 rpm -Power: 1.1kW -Type: B5 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Dimension: 500/200/H260 mm -Weight: 29 kg

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor with brake -Type: ZG2 BMRE 71K 4 -Speed: 40 rpm -Power: 0.55 kW -Construction: B3 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Brake: 4.5 Nm -Dimension: 530/200/H235 mm -Weight: 27 kg

Column drilling machine GOTHABear power 30 mmSpindle holder MK 3 - long quill, throat depth 350 mmPine stroke 200 mmTable size 460 mmSpindle speed 160 - 750 rpm. 4 stepsFeed rate 0.1 - 0.2 - 0.3 mm/COLUMN diameter 160 mmMotor power 2.2 kWNerg connection 380 volts, 50 Hz- Spindle speed via 4 gear stages- Automatic feed- Rotatable drilling table with mechanical clamping- Table height adjustment via hand crank- Clamping surface at the machine foot 450 x 450 mmSpace required L x W x H 700

Geared motor, electric motor, electric geared motor -Manufacturer: VEM, geared motor with brake -Type: ZG2 BPRE 71 K 4 -Speed: 40 rpm -Power: 0.55 kW -Design: B3 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Brake: 4.4 Nm -Dimensions: 520/203/H235 mm -Weight: 26 kg

Gears, spur gears, bevel gears, worm gears -Manufacturer: Nord, gearbox type SK 42125AD-100 L/4 -Translation: i = 87.30 -Drive shaft: hollow shaft Ø 60 x 235 mm -M2 max: 1892Nm -Dimensions: 380/250/H470 mm -Weight: 101 kg

Column drill INFRATIREA - ORADEA type PH - 031Series. No. 02434 Year of construction 1975Drilling capacity 40 mmSpindle holder MK 4 - short quillThroat depth 320 mmQuill stroke 250 mmTable size 400 x 400 mmColumn diameter 160 mmSpindle speed 85 - 1500 rpm. 6 gear stagesMotor power 2.2 kWNet connection 400 volts, 50 Hz- Spindle speed via 6 gear stages- Clockwise and counterclockwise rotation- Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/U- Drilling table swivelling- Table height adjustment via

Gear, cogs, spur gear -Gear: helical, 59 teeth -Diameter: Ø 344 mm -Tooth width: 80 mm -Dimensions: see photos -Total dimensions: Ø 344 x 467 mm -Weight: 78 kg

Gear, cogs, gear shaft -Gear shaft: helical -Diameter: Ø 127 mm -Tooth width: 83 mm -Dimensions: see photo techn. drawing -Total dimensions: Ø 127 x 450 mm -Weight: 25.5 kg

Milling head, upper head, mechanically switchable clutch, clutch gear, gear clutch -Clutch gear: Gear for mechanical clutch -Type: unfortunately no type designation -External: Ø 345 mm -Inside: Ø 223/218 mm -Width: Outside 53mm / Inside 70mm -Dimensions: see photos -Total dimensions: Ø 345 x 70 mm -Weight: 8.8 kg

A small geared drilling machine Knuth is available. Drilling capacity steel: 25mm, thread cutting steel: M10-M12, spindle taper: MT3, speed: 2900rpm, quill stroke: 400mm, arm reach: 250mm, table dimensions X/Y: 270mm/300mm. Machine dimensions X/Y/Z: approx. 600mm/600mm/1200mm, weight: approx. 200kg. An on-site inspection is possible.

I am selling this machine. Plugged in, can be tested. We can send a video of the machine via WhatsApp. The machine is well equipped Horizontal Gear Hobbing Machine Kolomna model 5B370. YOM – 1974. Max.working diameter- 500 mm; Max. module - 20; Max.workpiece lenght- 3 000mm; Very good working condition. Main technical data: Max working diameter:500 mm; Max diam. of workpiece:900 mm; Max workpiece length:3000 mm; Max modul of workpiece, mm: -by hobbing cutter 20; -by disk cutter 25; Max tilt angle:+45; Max weight of workpiece: 4000kg; Max diam. of hobbing cutters: 300mm; Max length of hobbing cutters:400 mm; Axial feeding: 0,02-575mm/min; Radial feeding: 0,36-7,1mm/min; Overall dimensions, mm: -length: 10770; -width: 4070; -height: 2580; Weight: 27100 kg.

Gear motor, electric motor, electric gear motor -Manufacturer: VEM, geared motor with brake -Type: G12-10/DK 84-200L -Speed: 40 rpm -Power: 0.75 kW -Construction: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 65 -Brake: 5 Nm -Dimension: 570/235/H195 mm -Weight: 34 kg

Gear motor, electric motor, electric gear motor -Manufacturer: KEB, gear motor type G 3.2 C DA 71 G 4 -Speed: 20 rpm -Power: 0.37kw -Shaft: Ø 30 x 60 mm -Protection class: IP55 -Type: B5 -Dimensions: 435/160/H220 mm -Weight: 21 kg

Gear motor, electric motor, electric gear motor -Manufacturer: ASUG VEM, geared motor -Transmission: ASUG type GWWN 1052 -Engine: VEM type KMR 56 K 4 -Power: 0.12 kW / 1360 rpm -Protection class: IP44 -Total dimensions: 290/135/H185 mm -Weight: 10 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Cebeha, gear motor type C30-63K/4DC -Speed: 106 rpm -Motor: 0.12 kW / 1340 rpm -Shaft: Ø 20 x 40 mm -Protection class: P33 -Total dimensions: 335/170/H170 mm -Weight: 11 kg

adjustable gearbox, variable speed gearbox, spindle gearbox -Manufacturer: PIV, variable speed transmission -Type KS 712 B3 -Shaft diameter: 19 x 28 mm -Shaft diameter: 19 x 40 mm -Individual components: see photos -Overall dimensions: 385/350/H310 mm -Weight: 38 kg

Geared motor SWE TYPE: R43DT71D2BMG Number:1046485101003996 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg20,21, Qty 1x

Geared motor, electric motor, three-phase motor, electric geared motor, offset geared motor -Manufacturer: Bauer, gear motor type BF10-04/D07LA4 -Speed: 43.5 rpm -Power: 0.37kw -Construction: B14 -Hollow ell: Ø 25 x 125 mm -Protection class: IP 65 -Dimensions: 370/270/H220 mm -Weight: 24 kg

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Neri, gear motor -Gear: Speed: approx. 105 rpm -Engine: Type T63BN/4 -Power: 0.18 kW / 1400 rpm -Shaft: Ø 25 x 80 mm -Protection class: IP54 -Dimensions: 365/125/H165 mm -Weight: 8.1 kg.

Cleanable transport screw Brand: van Beek (The Netherlands) YOM: 2016 Screw length: 1550mm Screw dia: 310mm The screw can easily be extended to clean. Dimensions ready for use: LxWxH 2800mm x1300mmx1150mm Dimensions ready to clean (extended) LxWxH 4250mm x1300mm x 1150mm Condition: very good Video's available.

TYPE: R43DT71D2BMG Number:1046485101000796 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg 20,21, quantity 1x

Gear motor, electric motor, electric gear motor, crane motor, crane drive -Manufacturer: DEMAG, gear motor from folding machine Lotze HDZK -Type: 24/14K4 -Speed: approx. 60 rpm -Shaft: Ø 45 x 70 mm -Motor: 5 kW / 1420 rpm -Voltage: 220/380V -Dimensions: 980/400/H410 mm -Weight: 255kg

Gears, spur gears, bevel gears, worm gears -Gear: bevel gear type E 080 B -Translation: i 24 : 1 -Shaft: Ø 12 x 25 mm -Hollow shaft: Ø 12 x 65 m -Dimensions: 140/60/H90 mm -Weight: 1.5 kg

Key data: 630 mm, 8

Max. outer diameter (gear): 630 mm Max. inner diameter (gear): approx. 750 mm Max. tooth width: 180–200 mm Max. module: 8 Shock stroke: up to 220 mm Stroke rate: 47–300 strokes/min Tool holder: MK 4 Drive power: approx. 8 kW Total connected load: approx. 10–12 kW Njbmsww Er Hompw Spjwk Machine weight: approx. 5,500–5,800

TYPE: R43DT71D2BMG Number:1046691501000596 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg 20,21, quantity 1x

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Jungheinrich, chassis drive motor for pedestrian stacker type: ERC 205 -Motor: Type GF106-G3 24V 2.0 kW -Motor brake: Type IQ BFK458-10E -Wheel: Type 1537 -Dimensions: 300/270/H650 mm -Weight: 65kg

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Logitrans, chassis drive motor from electric forklift SGL 2000V -Drive engine: CIMA 30351 24V 1.3 kW -Individual components: see photos -Dimensions: 290/235/H380 mm -Weight: 31 kg

I am selling this hobbing machine. Plugged in, can be tested. Many accessories. Technical parameters: Max. wheel: 7100 mm Gear wheel width: 1500 mm Max. module: 45 Table diameter: 4000 mm Cutter diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Planer diameter: 500 mm Planer speed: 9–63 rpm Total power consumption: 47 kW Weight: 160,000 kg

Chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Rapid, chassis drive motor faus electric stacker RVT 2500 -Drive motor::LS Leroy Somer type T15 24V 2.0 kW -Motor brake: Lenze -Individual components: see photos -Dimensions: 290/285/H700 mm -Weight: 76 kg

Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH211 SN 6.2 -Dimensions: see photos -Total dimensions: Ø 230 x 190 mm -Weight: 30 kg

Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO A16B -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg

Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO AS -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg

TYPE: R43DT71D2 Number:10466770602002396 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg 17,03

TYPE: R43DT71D2 Number:1046227901001996 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg17.03

TYPE: R43DT71D2BMG Number:1046405101000796 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg 20,21, quantity 1x

scrubber-dryer, floor cleaning machine, mop, gearbox -Manufacturer: Gansow, gearbox from scrubber-dryer 70 BF 70 -Mat.No.: 40S 11 001 -Bolt circle: Ø 90 mm -Translation: i= 8:1 -Number: 2x gearboxes available -Price: per piece -Dimensions: 270/125/H125 mm -Weight: 4.7 kg/pc.

Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 85 -Motor: Gansow type MRP4DS 400 W 24 V 130 rpm -Dimensions: 610/250/H200 mm -Weight: 20 kg

Various geared motors, one with inverter: NORD electric motor 7.5 kW with parallel shaft gearbox ratio 41.94 (No.1) Geared motor MUCHNA type 63A 1.5kW n1/n2 140/18 rpm (No.2) Electric motor 18.5 kW 1460rpm VEM motors (No.3) NORD Geared Motor 11kW with Inverter and External Fan (No4) NORD Gear Motor 5.5kW n2/n1 1450/142 (No5) For prices, nameplates and further details see: kleinanzeigen.de/s-bestandsliste.html?userId=37037422

Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 70 -Motor: Gansow type MRP4DS 400 W 24 V 130 rpm -Dimensions: 610/250/H200 mm -Weight: 20 kg

Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 70 -Motor: Gansow type 13509 367 W 24 V -Dimensions: 660/360/H250 mm -Weight: 51 kg

MODUL ZFWZ 1250x14I gear hober (can do 1580 mm) Max. Diameter: 1250 mm Cutting width: 600 mm Module 2-16 Maximum size of the hob: 240 x 280 mm Table diameter: 1020 mm Speeds: 28 – 200 rpm Axial feed rates: 0.28 – 8 mm/min Radial feed rates: 0.1 – 2 mm/min Tangential feeds: 0.16 – 4 mm/min Stand tilt – left/right: +/- 45 Main motor power: 5 / 19.5 kW Power of the rapids motor: 12,5 kW Max. diameter of the part without tailstock: 1,250 mm Max. diameter of the part with tailstock: 800 mm Weight of the machine : 16 t Machine dimensions approx. 4.5 x 2.1 x h 3.3 m EQUIPMENT: Extended driven shaft for gear cutting up to Ø 1580 mm Capability to work with hob cutters Ø 235 mm and length 380 mm. Inverter control of the main electric motor. Expanded set of change gears

Vernier caliper, vernier caliper, vernier caliper -Manufacturer: CSE, tooth width caliper sprocket caliper with fine adjustment -Measurement scale: 0-40 / 0-60 mm -Vernier: on both sides -Dimensions case: 175/155/H30 mm -Weight.: 0.5 kg

Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 70 -Motor: Gansow type 11500 1000 W 24 V -Transmission: Flender ZF 12 -Dimensions: 660/260/H150 mm -Weight: 43 kg

CHURCHILL PH3615 gear hobbing machine Max workpiece diameter 914 mm Max diametral/ pitch- 8 Module, 3 D.P. Horizontal centre distance:-63,5- 559 mm Max horizontal travel 469 mm Height hob centre to worktable: 127- 508 mm Max travel of vertical feed 381 mm Max height worktable to tailstock centre768 mm Table diameter 762 mm Table hole (diameter x depth) 89 x 381 mm Hob dia x length 178 x 203 mm Max travel of hob slide 127 mm Diameter of hob arbor 32 mm Hob spindle speeds, infinitely variable 50 – 200 rpm Vertical feeds 0.38 – 5 mm Main drive motor 10 HP Floor area 3960 x 2130 x 2300 mm Weight 11,500 kg Extended set of change gears Complete documentation Operational variable speed drives for main motor and feed drives