gear cutting used for sale

Manufacturer: Oerlikon Model: Plasmatome 20 HPC ( without cutting table ) Year of Manufacture: 2012 Cutting Range: 2,000 mm x 6,000 mm (2 x 6 meters) Material Thickness Capacity: Up to 35 mm Cutting Method: Plasma Cutting Find more here - .ucymachines/ Contact us at - sales@ucymachines

Inv. Num. : 9116 Type: PARAGON CUTTER Producer: GERBER Created: 2022 Parameters: Load capacity: 100 kg Max. material width: 2200 mm Top table length: 16800 mm Equipment: GERBER XLs125 SPREADER

A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible.

A paper core cutting machine Sternberg & Phillips with parallel winding capability is available. Winding units: 1, max. core width: 1750mm. An on-site inspection is possible.

turning diameter over bed: 340 mm turning diameter over slide rest: 177 mm turning length: 630 mm spindle turning speed - stepless: 55-3000 U/min weight of the machine ca.: 1.55 t dimensions of the machine ca.: 2 x 1 x 1.6 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MicroStep 2x plasma 6000 x 3000 mm Longitudinal travel X-axis: 6500 mm Cross travel Y-axis: 3300 mm Cutting capacity: 60 mm Table dimensions: 6000 x 3000 mm Plasmasource: 2x Kjelberg HiFocus 360 amp

Bysprint Fiber 4020 4 KW - Hours: 72,000 - Cutting hours: 20,000 - Last maintenance: 12/19/2025 - All modules in order - Cutting head in order, General overhaul 2024 - Annual scheduled maintenance always carried out by Bystronic

A total of two identical Tria S.p.A. plastic granulators are available. Rotor knives: 3, stator knives: 2, rotor diameter: 260mm, motor power: 7.5kW, throughput: 150kg-220kg/h, hopper opening: 350mm/300mm, hopper capacity: 30l, discharge hopper capacity: 15l, year of manufacture: 2015/2020. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 42 mm : 2,25/3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Portal Plasma Cutting Machine Manufacturer: Eckert Type: Jantar 2 Year of Make: 2011 CNC control Working area: 2x4 m 1 plasma torch with power source Kjellberg HiFocus 161i Automatic gas console Extraction table

: 0360 mm : 215 mm : 1000 mm : 180 mm : 42 mm : 3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Plasma cutting machine Microstep SPL-P 3001.15, built in 2011 Working area 1500x3000 mm, cuts steel, stainless steel and aluminum, incl. software, incl. plasma source Kjellberg HiFocus 161i with automatic gas console, pressure reducer and Extraction Donaldson Torit DCE for outdoor installation. Last major maintenance at the end of 2024 The plant has already been dismantled , loading is possible.

A CNC punching and laser cutting system Amada is available. Laser resonator: C-4000A, travel path X/Y: 2500mm/1250mm, laser power: 4kW, laser type: CO2, max. laser gas pressure: 4bar, max. cutting capacity: steel/stainless steel/aluminum: 25mm/15mm/10mm. Machine dimensions X/Y/Z: approx. 5700mm/2500mm/2300mm, weight: approx. 6400kg, control system: Amada. Including transformer TG515 (70kVA), cooling block, extraction system Keller Vario and beam path purging system Alphapac. Documentation available. An on-site inspection is possible.

Wire EDM machine Sodick AQ 537L with few operating hours

Inv. Num. : 9119 Type: DRM Max 3001.30PrkGb Producer: MicroStep Created: 2024 Parameters: The machine is in good condition.

: 0560 mm : 390 mm : 2000 mm : 280 mm : 80 mm : 11,25 kW spindle turning speed - stepless: 20-2000 U/min spindle taper: K 8 DIN 55027 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 9120 Type: MSF 4001.20Ltk T500 Producer: MicroStep Created: 2016 Parameters: Laser ON: 24000 h Beam ON: 22250 h Work table length: 4000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 20 mm Source: IPG YLS 4000W Cutting head: HIGHYAG BIMO FSC-MZ2.1 Machine height: 2570 mm Machine length: 10785 mm Machine width: 4508 mm Machine weight: 14689 kg

turning diameter over bed: mm turning diameter over slide rest: mm turning length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.54 m, Overall length= 0.83 m, Overall width= 1.05 m, Net weight= 293 kg,

Height=1.57 m, Overall length= 0.9 m, Overall width= 1 m, Net weight= 258 kg,

AJAN SHP 130 plasma cutting machine was built in 2021 in Turkey by Ajan Elektronik Servis San. Ve Tic. Ltd. Şti. The machine is used for precise cutting of a wide range of materials with a maximum thickness of 20 mm. The machining process is performed fully automatically, according to a pre-programmed cutting path. The plasma torch is powered by a powerful plasma source of the highest energy efficiency. The AJAN SHP 130 is distinguished by a stable work table with a length of 3000 mm and a width of 1500 mm and an integrated fume extraction system. This system effectively removes any contamination generated during machining, providing a high level of safety and comfort when using the machine. All necessary cutting parameters are programmed in the advanced CNC controller with menu in Polish. The operator also has at his disposal CAD/CAM software with an automatic nesting function, whic ...

Height=1.27 m, Overall length= 0.59 m, Overall width= 1.6 m, Net weight= 307 kg,

Inv. Num. : 9144 Type: Bylaser 4400 Producer: Bystronic Created: 2010 Parameters: Laser power: 4.4 kW Work table length: 4000 mm Work table width: 2000 mm Maximum table load (uniform): 1760 kg Maximum sheet metal cutting thickness (steel): 20 mm Number of tables: 2 Equipment: Impulse cutting Donaldson 5.5 kW Suction

Oxy-fuel cnc cutting machine. Prestine condition.

ARTIGLIO log band saw line SNT 140 - Eagle 1100, Manufacture year 2004, Sawmill line suitable for cutting logs up to 18 meters, Consisting of:, - Log infeed conveyor with log loading device, - ARTIGLIO 2 module - hydraulic log carriage, type Eagle 1100, module 1 with 4 pc. hydraulic headridges, module 2 with 2 pc. hydraulic headridges, It is possible to cut with only module 1 or together module 1+2, - ARTIGLIO hydraulic driven rope feeding, Incl. rails and guiding rollers, - ARTIGLIO control unit with controller, Incl. electric cabinets, - ARTIGLIO band saw machine, type SNT 140, - Outfeed conveyor system with reload deck and cross transports

cutting width: 55 cm feeding depth: 57 cm feeding high max.: 9,5 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mm turning diameter over slide rest: 330 mm turning diameter in the gap: 600 mm turning length: 3000 mm bed width: 505 mm spindle bore: 72 mm spindle head: DIN 55022 Gr. 8 taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/min power requirement: 18,5 kW dimensions: 5,3 x 1,75 x 1,53 m weight of the machine ca.: 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix C toolholder system - some toolholders - steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 390 mm turning diameter over slide rest: 190 mm turning length: 1000 mm turning dia. in gap: 460 mm spindle head: DIN 55026 Gr. 6 spindle bore: 52 mm turning speed range: 11,2 - 2240 U/min power requirement: 7,5 kW bed width: 355 mm dimensions: 2,8 x 1,3 x 1,6 m weight of the machine ca.: 1,9 t Equipment: - Multifix B with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jaws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal Cutting Machine for baguettes, rolls, croissants, pretzels, etc. Output approx. 2,000/h with 2 knives Adjustable cutting height Channel width approx. 15cm Channel height approx. 9cm completely stainless steel

Workpiece dimensions: 4000x2000x20mm, laser power: 4kW, connected load: 88kVA, nitrogen/ oxygen connection: 30/ 20bar, control system: Siemens 840D, length: 7000mm, width: 3600mm, height: 2300mm, weight: 12.5t. An on-site inspection is possible.

Offered is a tube laser cutting machine. Processing length X: 6500mm, workpiece diameter max.: 220mm, laser power: 3500W, beam source: CO2, power-on hours: 48817h, laser beam hours: 9403h, RF tube: renewed 01/2023. Equipped with bundle loader, unloading station, extraction system, cooling unit, annual manufacturer maintenance documented. Weight: approx. 9000kg, overall dimensions X/Y/Z: approx. 10500mm/4600mm/2200mm. Inspection possible by arrangement. Expected to be available starting October/November 2026.

Cutting table Seewer Rondo SFT362. A23 Pastry Line The robust stainless steel construction of the sheeters and cutting tables guarantees a long service life. Condition: cleaned & tested Total length approx. 360 cm Belt speed adjustable Incl. various cutting rollers Year of Make: 1998 Four time-saving steps1. The dough is gently rolled out and reeled on the sheeter.2. Place the dough belt on the cutting table, where it is uncoiled again.3. The dough sheet is cut into the desired shape.4. They fill and fold the pastries on the cutting table.

x-axis: 350 mm y-axis: 250 mm z-axis: 256 mm U-axis: +/-70 mm V-axis: +/-70 mm dimension of workpiece: 750 x 550 x 256 mm Working hours: 29.559 h total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m -edm hours 29559h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 480 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: - mm turning speeds: 90 - 1120 U/min centre height: 240 mm spindle bore: 52 mm total power requirement: 7,5 KW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 3,0 x 1,3 x 1,5 m Engine Lathe - 3-jaw chuck (200 mm) - Quick-change tool post - Steady rest - Machine lamp - Chip tray - Center point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic Press for Diamond Cutting Disc 60phi500phi Plate Furnace Medium Pressure Forming Machine Instruction Manual 1988.6.25 Kyodo Seiki Co., Ltd. Postal:211 518-4 Ogura, Saiwai-ku, Kawasaki-shi, Kanagawa, Japan TEL: 044(544)6925 FAX: 044-541-3546 1. Machine Specifications 1) Maximum Output: 60,000 kg 2) Max Output Pressure: 150 kg/cm² 3) Effective Stroke: 250 mm 4) Furnace Dimensions: - Horizontal Side: 8kw × 2 - Rear Side (With Door): 8kw 24kw 5) Heating Temperature: 860°C 6) Internal Dimensions: W650 mm × N 450 mm ×D 750 mm 7) Power Input: - Main Pump: 2.2 kW × 4 pole - Auxiliary Pump: 0.4 kW × 4 pole 8) Oil Tank Capacity: 120 L (ISO.VG32-56 equivalent hydraulic oil) 9) Temperature Control: Silister P.I.D Control 10) Vacuum: 4-stage 415V - 50Hz 2. Machine Installation 1) Install the press body on a flat surface. Secure it with anchor bolts if possi ...

Horizontal panel saw with pressure beam Type: HPP 200/32/32 Manufacturer: Holzma Year: 2015 Avaílable: 10/2026 Cross section: 3200x3200 mm Optimization directly on the CADPLAN 4 saw - JUST IN TIME Large PICA II printer Two engines, main unit 13kw, pre-cut 1.1kw Package for cut-outs Grooving package Additional two-finger collet for the 175mm position 3x set of disc and pre-cut Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -Manufacturer: Edalco, Thread cutting attachment with slip clutch -Type: Edalmatic EDM-R 1030 -Thread cutting sizes: M10 - M30 -Integrated reversing gearbox: with rapid return -Recording: MK5 -Tap chuck: Ø 22 mm -Dimensions: Ø 123 x 475 mm -Weight: 9 kg

This 3-axis TRUMPF TruLaser 3030 L20 was manufactured in 2015. It features a powerful TruFlow 3200 CO2 laser with a laser power of 3200 W, making it suitable for various cutting applications. The machine has been utilized for 82,247 working hours, ensuring reliability and performance. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 L20 machine we have for sale. Contact us for further details.

This 5-axis MAVIJET MJT-W53D-4020 was manufactured in 2020, featuring a CNC 5-axis, bridge type design for precision waterjet cutting. It includes a high-pressure pump operating at 4000 bar and a rapid traverse speed of 30000 mm/min. The machine supports a cutting size of 4000 × 2000 × 250 mm and is equipped with a smart abrasive reserve tank. If you are looking to get high-quality cutting capabilities, consider the MAVIJET MJT-W53D-4020 machine we have for sale. Contact us for more information.

This 4-axis Baykal BPS-3006 was manufactured in 2020, featuring a CNC Plasma Cutting Machine with a cutting table size of 3000 × 6000 mm. It includes a rotary axis for tube and pipe cutting and is equipped with a Hypertherm HPR 130XD plasma source. If you are looking to get high-quality cutting capabilities, consider the Baykal BPS-3006 machine we have for sale. Contact us for more information about this machine.

EDM machine Sodick AQ 327L BJ 2006 EDM machine Sodick AG 60L BJ 2020

Polar 115 EMC monitor in production ready condition, with extra reserve blades. Available immediately. Can ship worldwide.

- Program - Air table - Standard side table, right - Resopal side table with air , left - R2 Jogger - Spare kife

SOITAAB DUALINE 1530 waterjet cutting machine was built in 2011 in Italy by SOITAAB Impianti srl. It is an extremely versatile machine that combines the advantages of waterjet and plasma cutting, providing great production flexibility. It is capable of machining a wide range of materials, such as metal, plastic, stone and glass, which makes it suitable for use in a number of industries. Cutting is performed by means of a state-of-the-art AccuValve head, designed for maximum efficiency and reliable operation in demanding production conditions. The head moves in the X,Y,Z axes with feeds of 3000 mm, 1500 mm and 200 mm respectively. Depending on the type of task, either water jet with an abrasive addition or plasma generated by a reliable HYPERTHERM plasma source of the highest energy efficiency is used. The SOITAAB DUALINE WaterJet ensures high work stability during even the most int ...

This TRUMPF Trumatic L6050 was manufactured in 2006. A robust laser cutting machine featuring a SIEMENS SINUMERIK 840D controller, it handles a maximum workpiece weight of 1.900 kg. It efficiently cuts through mild steel up to 20 mm, stainless steel up to 15 mm, and aluminium up to 10 mm. Ideal for large-scale operations with a working area of 6.000 x 2.000 mm. For more information about this laser cutting machine, please reach out to us.

Leit & Pull Spindle Lathe "DREHMA - D410x1500mm -Demonstration machine - year 2025 -CE - Identifier -Digital display -Turning diameter over bed 410mm -Turning length 1500mm -Turning diameter over support 255mm -Turning diameter in the offset 580mm -Spindle Passage 52mm -Speed range 45-1800 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric etc. -Tailstock Mk4 -Central lubrication -Drive power 3.5 KW -Fixed / Rotating bezel -Multifix holder with 4x inserts -Three-jaw chuck 200mm Hsbknowatv Ss Au S Tel -Four-jaw chuck 250mm -Face Plate -Lining protection -Front safety device -Coolant device -Work light -Running tip -Machine feet Dimensions: LxWxH 2.5x1x1.6 meters / Weight 1800Kg

This 3s LVD Orion 3015 Plus was manufactured in 2013. It features a powerful 2500 W Fanuc HF-excited CO₂ laser, capable of cutting various materials with a maximum sheet size of 3000 × 1500 mm and a weight of 570 kg. The machine offers impressive positioning speeds of 100 m/min on the X/Y axes. Consider the opportunity to buy this LVD Orion 3015 Plus fiber laser cutting machine. Contact us for further details.

Optimum Lathe D330 x 1000 SG -Center width: 1000 mm -Circumferential diameter over bed: 330 mm -Circumferential diameter over support: approx. 190–200 mm -Spindle bore: approx. 38 mm -Spindle mount: Camlock (mostly D1-4) -Speed range: approx. 70 – 2000 rpm (stepped) -Feeds: longitudinal and flat, automatic -Threading: metric and imperial possible -Motor power: approx. 1.5 – 2.2 kW -Voltage: 400 V / 3 phases -Tailstock mount: MK3 - Spindle holder: MK5 -Work light -Three-jaw chuck -13x Face Plates/Drive Plates -Multifix with 1 steel holder -Machine feet -Lining protection Dimensions: LxWxH 1.9x0.7x1.5 meters / Weight 700Kg

A CNC 5-axis hydro-abrasive waterjet cutting system C.M.S. Tecnocut is available. Working dimensions X/Y/Z: 3300mm/1705mm/150mm, table dimensions X/Y: 3700mm/2050mm, max. table load: 1000kg/m², rapid traverse: 40m/min, pump: CMS GreenJet Evo Electric, max. operating pressure: 4139bar, power: 34kW. Overall system dimensions X/Y/Z: approx. 5700mm/2550mm/3900mm, weight: approx. 11200kg, operating hours: approx. 1500h. The system is fully equipped except for a clamping unit for pipes. Documentation available. An on-site inspection is possible.

This Waterjet Italy WL510 was manufactured in 2022. Its a waterjet cutting machine designed for precision in cutting a wide range of materials. Ideal for industries requiring detailed and accurate cutting work. Contact us for more information.