134,856 used machines on RESALE, but how to find them? Machine Search
Unused, On and including 1x pallet Auction-ID: A1-50447-67
Auction-ID: A1-50608-113
General Description Conventional geared engine lathe designed for precision turning, facing, boring, drilling and threading of cylindrical metal workpieces. The machine is equipped with a geared headstock, manual carriage and tailstock for general machining applications. Technical Details Machine type: Geared engine lathe 3-jaw chuck Tailstock Drill chuck mounted in tailstock 4-way toolpost Threading gearbox Feed gearbox Working carriage assembly Condition Used industrial condition. The machine appears complete with chuck, tailstock, toolpost, carriage and gearbox assemblies. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-50745-30
Auction-ID: A1-50608-116
Bomag KA HVP-C3 010630 Pump Transfer Case ET: 05901322, 05901116 Bomag BC1172RB Incl. pallet dimensions 120x80x50 Stacker available Viewing desired Auction-ID: A1-50807-30
KA HPV-D4 014410 Pump Transfer Case ET: 05901314, 05901007 Incl. pallet 120x80x50 Stacker available Viewing desired Auction-ID: A1-50807-28
Liebherr SAT, forklift available, inspection desired, incl. pallet Dimensions: 120x80x62 cm, 340Kg. Auction-ID: A1-50807-6
AZP R1C6-6-6/048001AA DAVID Brown - 817124 G9 003 Incl. pallet 60x80x38, Kg140, forklift available, inspection desired. Auction-ID: A1-50807-13
Parallel Gear Motor Manufacturer: Bauer Model No.: BF20-04/DHE08XA4 New part from stock, may show traces of storage. Internal No. 628 079 398072039291
Connection: 220-480V-50/60 Hz Auction-ID: A7-50858-60
Hermle 102.04 Gear Hobbing Machine Manufacturer: Hermle Model: 102.04 Machine type: Gear Hobbing Machine Industrial gear hobbing machine designed for the production of gears. Equipped with change gears for adjusting gear cutting operations. Suitable for gear manufacturing and mechanical engineering applications. Reported to be in good condition and currently under power. Technical specifications: Machining process: Gear hobbing Change gears: Included Operating status: Under power Additional equipment: Set of change gears Approx. dimensions (L × W × H): 1,800 × 1,200 × 1,800 mm Approx. weight: 1,200 kg Condition: Used, good condition. All descriptions, technical specifications, dimensions, weights and other information are indicative only. Auction-ID: A7-50842-6
Connection: 220-480V-50/60 Hz Auction-ID: A7-50858-59
Hermle 132 Gear Hobbing Machine Manufacturer: Hermle Model: 132 Machine type: Gear Hobbing Machine Industrial gear hobbing machine designed for the production of spur gears up to module 2 mm. Equipped with change gears for adjusting gear cutting operations. Suitable for precision gear manufacturing and mechanical engineering applications. Reported to be in good condition and currently under power. Technical specifications: Gear type: Spur gears Maximum gear module: 2 mm Change gears: Included Operating status: Under power Additional equipment: Set of change gears Approx. dimensions (L × W × H): 1,800 × 1,200 × 1,800 mm Approx. weight: 1,200 kg Condition: Used, good condition. All descriptions, technical specifications, dimensions, weights and other information are indicative only. Auction-ID: A7-50842-5
Connection: 220-480V-50/60 Hz Auction-ID: A7-50858-57
Drive gearbox in compact industrial design. Designed as a transmission unit with attached hydraulic component. Walterscheid Powertrain Solutions is one of the established suppliers in the field of mobile drive technology. Use as drive or replacement gearboxes in construction machinery, telehandlers, wheel loaders as well as in agricultural and municipal technology. Suitable for repair, conversion or as a spare parts donor. Technical data according to the nameplate: Total Ratio: 1.39 : 1 Serial/Manuf. No.: 581578-0899.22 Customer Ident. No.: 1000303090 Attached hydraulic component according to separate nameplate: Manufacturer: AlphaFluid Hydrauliksysteme, D-72124 Pliezhausen Identification number: 206390 S-No.: 17601 ID: 7/22 Gearbox unused. Dimensions and weights are approximate. Auction-ID: A1-50849-122
Drive gearbox in compact industrial design. Designed as a transmission unit with hydraulic control or connection components. Walterscheid Powertrain Solutions is one of the established suppliers in the field of mobile drive technology. Use as drive or replacement gearboxes in construction machinery, telehandlers, wheel loaders as well as in agricultural and municipal technology. Suitable for repair, conversion or as a spare parts donor. Technical data according to the nameplate: Gear ratio: 1.20 : 1 Serial / Manufacturing No.: 581919-3837.21 Customer Ident. No.: 1000466643 Further marking: 599488 Item No.: AE207730 further marking: 216 / 44/21 Gearbox unused. Dimensions and weights are approximate. Auction-ID: A1-50849-20
Drive gearbox in compact industrial design. Designed as a transmission unit with attached hydraulic component. Walterscheid Powertrain Solutions is one of the established suppliers in the field of mobile drive technology. Use as drive or replacement gearboxes in construction machinery, telehandlers, wheel loaders as well as in agricultural and municipal technology. Suitable for repair, conversion or as a spare parts donor. Technical data according to the nameplate: Total Ratio: 1.39 : 1 Serial/Manuf. No.: 581578-3387.22 Customer Ident. No.: 1000303090 Attached hydraulic component according to separate nameplate: Manufacturer: AlphaFluid Hydrauliksysteme, D-72124 Pliezhausen Identification number: 206390 S-No.: 17746 Rating: 44/22 Gearbox unused. Dimensions and weights are approximate. Auction-ID: A1-50849-81
Drive gearbox in compact industrial design. Designed as a transmission unit with hydraulic control or connection components. Walterscheid Powertrain Solutions is one of the established suppliers in the field of mobile drive technology. Use as drive or replacement gearboxes in construction machinery, telehandlers, wheel loaders as well as in agricultural and municipal technology. Suitable for repair, conversion or as a spare parts donor. Technical data according to the nameplate: Total Ratio: 1.20 : 1 Serial / Manuf. No.: 581919-3839.21 Customer Ident. No.: 1000456643 Gearbox unused. Dimensions and weights are approximate. Auction-ID: A1-50849-71
Drive gearbox in compact industrial design. Designed as a transmission unit with attached hydraulic component. Walterscheid Powertrain Solutions is one of the established suppliers in the field of mobile drive technology. Use as drive or replacement gearboxes in construction machinery, telehandlers, wheel loaders as well as in agricultural and municipal technology. Suitable for repair, conversion or as a spare parts donor. Technical data according to the nameplate: Total Ratio: 1.39 : 1 Serial/Manuf. No.: 581578-3388.22 Customer Ident. No.: 1000303090 Attached hydraulic component according to separate nameplate: Manufacturer: AlphaFluid Hydrauliksysteme, D-72124 Pliezhausen Identification number: 206390 S-No.: 17738 ID: 37/22 Gearbox unused. Dimensions and weights are approximate. Auction-ID: A1-50849-74
Geared motor Manufacturer: Danfoss Type: BG30Z-11/DV05LA4 The device is NEW and fully functional, see pictures for more details. Internal number: 627 101 397896382979
max. diameter of machined gear: 320 mm, max. table feed: 180 mm, max. module of machined gears: 6, distance from cutter axis to spindle nose: 120-300 mm, taper: Morse 5 Auction-ID: A1-50601-44
vertical and horizontal table feed: 150 mm, max. diameter of the machined gear: 125 mm, max. width of the machined gear rim: 140 mm, max. length of the machined gears: 300 mm, max. module of the machined gears: 2.5, max. helix angle of the machined gear teeth: 45 degrees Auction-ID: A1-50601-42
maximum diameter of the machined wheel: 320 mm, maximum module of the machined wheel: 6, maximum tooth length of the machined wheel: 220 mm, clamping spindle diameter: 250 mm, maximum diameter of the installed screws: 160 mm, maximum vertical travel of the chamfering clamp: 250 mm, CNC control: Siemens Simatic touch Auction-ID: A1-50601-41
maximum milling diameter: 320 mm milling length: 220 mm maximum module: 6 mm maximum tooth angle: +/- 60° maximum cutter diameter: 160 mm Auction-ID: A1-50601-45
max. diameter of machined gear: 320 mm, max. vertical feed: 250 mm, max. length of machined gears: at a 30-degree angle: 220 mm, at a 45-degree angle: 150 mm, at a 60-degree angle: 100 mm, max. module of machined gears: 6, bore diameter: 160 mm, taper: Morse 5 Auction-ID: A1-50601-43
max. wheel diameter: 1600 mm gear width: 660 mm max. module: 16/18 min. module: number of milling spindle turning speeds: 18 number of feeds: 18 total power requirement: 12 kW weight of the machine ca.: 20 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Rheingetriebe Model No.: 3783S0071 107148 i= 40 / H8-RG T2= 420 Nm 2022 1.5kw The engine is new, may show traces of bearings, see pictures. Internal number: 609 903 257398532800
Geared motor, electric motor, electric geared motor -Handover: in its current condition as inspected -Gearbox mount: Damage, see photos -Manufacturer of transmission: SEW-Eurodrive type R80 LP90 -Speed: 7.58 rpm i= 186.6 -Motor manufacturer: ETM type IMB5-90Sx1,1x1500A -Power: 1.1 kW -Shaft: Ø 50 x 100 mm -Protection class: IP 54 -Dimensions: 745/295/H305 mm -Weight: 78 kg
FAICOM FL 6194 oil and gear lubricant dispensing pump with 6:1 ratio, for 180-200 kg drums. Delivery rate (measured at pump outlet at 20 °C ambient and 7 bar operating pressure): 14.5 l/min with SAE 20, 14 l/min with SAE 90 and 13.6 l/min with SAE 140. Suction tube length 94 cm. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-39
CNC Thread rolling and gear burnishing machine, ESCOFIER P440 CN, CNC Siemens, New 2004 - like new, 2-roll, 2 moving heads, 4000 daN rolling pressure, workpiece diameter: 100mm max., tool diameter: 180-245mm, Swivelling: +/-6°,, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s, motor power: 8.6kW, New: 2004, Condition: like new, under power in our warehouse, Mimu Machine Tools (Italy)
WAHLI W 92 ist eine Abwälzfräsmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsbereich: Ø max 10 mm, größtes Modul 0,5, Werkstücklänge max 35 mm, Zahnradbreite max 15 mm, Zähnezahl 6–180, Abstand Werkstück-Werkzeug 0–28 mm. Technische Daten: Walzfräser Ø max 24 mm; Fräserdrehzahlen 6 Stufen 850–4500 t/min; Anschluss 50 Hz, 3x380 V; Leistung 0,32 CV; Gewicht ~350 kg; Abmessungen L630×B530×H1350 mm. Zubehör: Lader Wahli W20. Ermöglicht enge Toleranzen; geeignet für Uhrmacherei, Präzisionsmechanik, Automotive-Teile und Werkzeugbau. Technische Daten ohne Gewähr
5007, TH750, KT429, 4509, KT459, 4507, TH745, KT507, 4209, KT429, 4507, 5507, KT557, TH755, KT557, KT559, 5509, Used Auction-ID: A1-50849-568
- Manufacturer: Suzuki - Model: Jimny - Vehicle type: Off-road vehicle / 4x4 - Registration date: 2010 - Fuel: Gasoline - Displacement: 1,328 cm³ - Power: 63 kW / 85 hp - Emission class: Euro 4 - Transmission: 5-speed manual transmission - Drive: switchable all-wheel drive - Driving modes: 2WD / 4WD / 4WD-L - Mileage: 176,111 km - Color: Green - Engine running - Gearbox running - Trailer hitch available - Spare wheel at the rear with cover - Cargo compartment tray available - Rear seats can be folded down - Interior used and dirty - Driver's seat damaged / torn open on the side - Bodywork with scratches and signs of use - Front bumper weathered / with signs of wear - Visible corrosion on metal and fastening parts - Trailer hitch and rear undercarriage area with traces of rust - Engine compartment dirty due to age and use - Partially visible traces of corrosion in the ...
418-32, 2706, TH627 Used Auction-ID: A1-50849-572
Used Ford 2722E Marine, acquired by trade-in. The engine is complete with gearbox and dashboard, it is not stuck. Auction-ID: A1-47366-108
max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:8,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation
weight of the machine ca.:8 t dimensions of the machine ca.:2,95 x 1,6 x 2,36 m chucking diameter:250 mm swing diameter:265 mm x-travel:170 mm z-travel:200 mm spindle turning speed range:1.500 U/min spindle bearing diameter:100 mm Pick-up machine
max. wheel diameter:200 mm gear width:250 mm max. module:3 min. module:0,5 total power requirement:45 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation
max. wheel diameter:150 mm gear width: mm max. module:3,5 min. module:1,25 total power requirement: kW weight of the machine ca.:6,5 t dimensions of the machine ca.:2,35 x 2,10 x 2,35 m Width of teeth:45 mm boring diameter:100 mm surface area:1300 x 300 mm
max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...
max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...
max. wheel diameter:50 mm gear width:20 mm max. module:4 mm min. module:0,1 mm total power requirement:12,5 kW weight of the machine ca.:4000 kg dimensions of the machine ca.:2,2 x 2,5 x 2,3 m workpiece length - max.:300 mm
max. wheel diameter:260 mm gear width:320 mm max. module:5 weight of the machine ca.:21 t dimensions of the machine ca.:8,71 x 5,97 x 3,49 m no. of teeth:1...999 max. helix angle:+45/-45 ° pitch min.:0,1 mm pitch max.:1000 mm X-axis:345 mm y-axis:250 mm Z-axis:320 mm b-axis:360 ° c-axis:360 ° Coolant is not available. It was central and there is only a booster pump without filtering. For loading system there is a 2-axes robot with workpiece conveyor.
max. wheel diameter:280 mm max. module:7 weight of the machine ca.:13 t table turning speeds:100 U/min table diameter:250 mm min. number of teeth:4 hob turning speeds:1500 U/min max. hob diameter:160 cutter length max.:230 mm Machine in good condition. Available 01.08.2024
max. wheel diameter:200 mm gear width:60 mm max. module:7 weight of the machine ca.:15 t table diameter:180 mm table turning speeds:100 U/min hob turning speeds:750 U/min Machine in good condition, without feed, without automation Available 24.08.2024
max. wheel diameter:900 mm max. module:10 weight of the machine ca.:8200 kos. hob dia. - max.:190 mm cutter length max.:320 mm milling spindle speeds (infinitely variable):13-80 U/min workpiece length - max.:750 mm max. workpiece diameter:150 mm Counter holder milling mandrel is missing
max. wheel diameter:200 mm gear width:50 mm max. module:6 table diameter:168,14 mm boring diameter:65,532 mm weight of the machine ca.:11 t table turning speeds:0-1.000 U/min length of stroke min./max.:0-70 mm no. of strokes:180-1.800 Stück This machine can be used to make tandler gears. However, for helical gearing, a helical guide is also required.
max. wheel diameter:210 mm total power requirement:60 kW weight of the machine ca.:8 t dimensions of the machine ca.:2,85 x 2,60 x 1,80 m grinding slide feed:700 mm grinding slide feeds:1-15.000 m/min max. workpiece weight:150 kg centre height:260 mm grinding wheel diameter:240 mm
maximum number of results exceeded
please refine your search
200 € 
