gear cutting used for sale

Trapezoidal lead screw with screw jack NEFF MULI 1 M1-N-H-TGS-0250-G Lifting capacity 5 kN stroke: 250 mm Spindle: Ø 18 mm used, tested ! Dimensions: 440 x 105 x 85 mm

Reishauer RZ 362A Built in 1999 Accessories: 2x Fässler dressing device Diamond Wheels Whetstones Turbo separator

gear, gears, gear shaft, pinion shaft, spur gear, spur gear -Gear shaft: straight-toothed pinion shaft -Gear: Diameter Ø 67 mm / 30 teeth -Shaft mount: inner Ø 36 mm -Dimensions: see photo technical drawing -Quantity: 1x gear shaft available Total dimensions: Ø 67 x 45 mm -Weight: 0.4 kg

dividing head, dividing head, gear, gears, lathe -Gear: 87 teeth module 1.5 -Tooth width: 17 mm -Shaft mount: Ø 28/23 mm -Dimensions: see photo parts list -Number: 4x gear available -Price: per piece -Dimensions: Ø 134 x 17 mm -Weight: 0.3 kg/piece.

dividing head, dividing head, gear, gears, lathe -Gear: 87 teeth module 1.5 -Tooth width: 14 mm -Shaft mount: Ø 28/23 mm -Dimensions: see photo parts list -Number: 2x gear available -Price: per piece -Dimensions: Ø 134 x 17 mm -Weight: 0.3 kg/piece.

Gear Hobbing Machine Pfauter P 400 With interchangeable wheels 

Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: KEB, spur gear motor type G 1.2 C DK 63 G 4 /TS140 -Speed: 36 rpm -Power: 0.18 kW -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 345/125/H185 mm -Weight: 12.3 kg

Thread milling and hobbing machine Wanderer 31 NU Machining length 3000 mm With accessories

Gear hobbing machine vertical Pfauter P251 With accessories

Gear motor, electric motor, three-phase motor, feed motor -Manufacturer: Weg, gear motor with attachments -Engine: Type ODG 732 T/372 -Power: 0.55 kW -Gearbox: Type ZB 4824 i= 645 -Drive wheel speed: 30 rpm -Dimensions total: 360/250/H350 mm -Weight: 31.1 kg

Gear, gears, gear shaft, pinion shaft, spur gear, spur gear, hollow ground gear -Gear: spur gear with hollow ground 63 teeth -Shaft holder: inner Ø 40 x 45 mm -Dimensions: see photos -Dimensions total: Ø 134 x 60 mm -Weight: 1.8 kg

dividing head, dividing head, gear, gears, lathe -Gear: 70 teeth module 1.5 -Tooth width: 12 mm -Shaft mount: Ø 20 mm -Dimensions: see photo parts list -Quantity: 1x gear available -Dimensions: Ø 108 x 12 mm -Weight: 0.5 kg.

Globoid gear, indexing, oscillator indexer, index gear, rotary index drive -Manufacturer: CAMCO, index gear -Type: MSHV40A917-Y7A -Overload clutch: 11FC-SD -Shaft: Ø 55x45 / 35x80 / 35x75 mm -Translation: 20 rev. = 90° -Dimensions: 815/720/H585 mm -Weight: 327 kg

Gearbox, spur gear, angle gear, worm gear -Manufacturer: Ruhrgetriebe, gearbox type SN 3 B -Translation: i= 12 : 1 -max. torque: 13.5 Nm -Shafts: Ø 12 x 30 mm -Number: 3x gearbox available -Price: per piece -Dimensions: 130/114/H75 mm -Weight: 0.9 kg

Gearboxes, spur gears, angle gears, worm gears, bevel gears -Manufacturer: Poggi, gearboxes, bevel gears -Shafts: Ø 24 x 50 mm -Number: 3x gearbox available -Price: per piece -Dimensions: 250/250/H86 mm -Weight: 4.9 kg/piece

Gearboxes, spur gears, angle gears, worm gears, bevel gears -Manufacturer: Marzorati, gearbox type A 150 with magnetic filter -Shafts: Ø 32 x 45 mm -Dimensions: 310/275/H200 mm -Weight: 19.6 kg

Gear hobbing machine horizontal Pfauter P160 With accessories

Gearboxes, spur gears, angle gears, worm gears, bevel gears -Manufacturer: Poggi, gearboxes, bevel gears -Translation: 1:2 -Shafts: Ø 24 x 50 mm -Number: 1x gearbox available -Price: per piece -Dimensions: 252/245/H85 mm -Weight: 4.7 kg

Klingelnberg ZW 301 Gear Measuring Machine Weight 750 kg

Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, spur gear motor -Type: DF 132-G90 S/6 -Speed: 22 rpm -Power: 1 kW -Shaft: Ø 40 x 80 mm -Protection rating: IP54 -Dimensions: 575/250/H240 mm -Weight: 42 kg

Pfauter RS 2 With accessories

It is a new gear kneading tool - spiral for Boku spiral mixer SK 240 A for sale. Price on request.

DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer of gearbox: Nord., type 1SI50F F i =15 -Speed: 200 rpm -Engine manufacturer: B&R Type 8LVA23.R0030D100-0 -Voltage: 57 V -Shaft: Ø 25 x 50 mm -Dimensions: 275/200/H170 mm -Weight: 7.5 kg

Gearboxes, spur gears, bevel gears, worm gears -Manufacturer: Nord, Gearbox type SK 1SI40F -Translation: i = 15.00 -Hollow shaft: Ø 18 x 83 mm -M2 max: 49 Nm -Dimensions: 150/120/H150 mm -Weight: 2.7 kg

DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer of gearbox: Nord., type 1SI50F F i =15 -Speed: 200 rpm -Engine manufacturer: B&R Type 8LVA23.R0030D100-0 -Voltage: 57 V -Shaft: Ø 20 x 25 mm -Dimensions: 275/140/H175 mm -Weight: 7.2 kg

Indexer, indexing gear, cam indexer, rotary table indexer, rotary indexing drive -Manufacturer: Candex, cam indexer -Type: RU45DFS-02-180-2RX-CN -Shaft: Ø16 mm / 2x Ø14 mm -Translation: 1:2 -Dimensions: 160/150/H130 mm -Weight: 5.2 kg

Geared motor, electric motor, electric geared motor -Speed: 3/25 rpm -Power: 0.07/0.55 kW -Brake -Design: B14 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Weight: 38 kg

Geared motor, electric motor, three-phase motor -Speed: 36/144 rpm -Power: 2.2/5.5 kW -Type: RF83WD132ML-8-2BS/HL/TF -Brake -Design: B5 -Shaft diameter: Ø 50 mm -Protection class: IP 33 -Number: 2x motors available Price: per piece -Dimensions: -Weight: 160 kg

heavy gearbox, spur gear gearbox -Translation: 186:1 -Drive shaft: Ø 16 mm -Output shaft: Ø 50 mm -Number: 2x gearboxes available Price: per piece -Weight: 80 kg/piece

geared motor, electric motor -Speed: 10/20 rpm -Power: 0.37/0.88 kW -Design: B3 -Brake -Shaft diameter: Ø 40 mm -Protection class: IP 44 -Weight: 60 kg

Geared motor, electric motor, three-phase motor -Speed: 29/117 rpm -Power: 0.06/0.25 kW -Design: B3 -Shaft diameter: 25 mm -Protection class: IP 54 -Weight: 20 kg

max. wheel diameter: 406 mm gear width: 420 mm max. module: 4,3 min. module: 0,5 hob turning speeds: 49 - 246 U/min table bore diameter: 80 mm total power requirement: 7 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,8 x 1,6 x 2,2 m Year of construction approx. 1980 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geared motor, electric motor, electric geared motor, geared motor for stop -Speed: 7.1/320 rpm -Power: 0.16/3 kW -Design: B5 -Shaft diameter: 30 mm -Protection class: IP 54 -Weight: 40 kg

Geared motor, electric motor, electric geared motor -Speed: 15 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: 25 mm -Protection class: IP 54 -Weight: 40 kg

Geared motor, electric motor, electric geared motor -Speed: 25 rpm -Power: 0.55 kW -Design: Hollow shaft -Brake -Shaft diameter: 30 mm -Protection class: IP 54 -Weight: 30 kg

Geared motor, electric motor, electric geared motor -Power: 0.37 kW -Speed: 43 rpm -Design: B5 -Shaft diameter: 25 mm -Protection class: IP 54 -Weight: 15 kg

Geared motor, electric motor, electric geared motor, geared motor for stop -Speed: 7.1/320 rpm -Power: 0.16/3 kW -Design: B5 -Shaft diameter: 30 mm -Protection class: IP 54 -Weight: 40 kg

Geared motor, electric motor, electric geared motor -Speed: 15 rpm -Power: 0.37 kW -Design: Hollow shaft -Shaft diameter: 30 mm -Protection class: IP 54 -Weight: 30 kg

Geared motor, electric motor, electric geared motor -Speed: 16 rpm -Power: 0.37 kW -Design: Hollow shaft -Shaft diameter: 30 mm -Protection class: IP 54 -Weight: 30 kg

MODUL ZFWZ 3150/3 Gear hobbing machine max. wheel dia. 3150 mm min. wheel dia. 500 mm max. wheel diameter with outboard-support 1600 mm max. module 30 mm gear width 1000 mm max. helical angle 45 deg tangential adjustment 500 mm cutter length max. 440 mm diameter of cutter (hob) 350 mm table diameter 2400 mm table bore diameter 500 mm depth of hole 1100 m table load max. 30 t Accessories Dimnsions 6700x5400x4800 mm Weight 65000 kg

Geared motor, electric motor, electric geared motor -Speed: 27 rpm -Power: 0.12 kW -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 54 -Weight: 10 kg

Geared motor, electric motor, electric geared motor -Speed: 77 rpm -Power: 0.55 kW -Design: Angle gear -Brake -Shaft diameter: 19 mm -Protection class: IP 54 -Weight: 22 kg

Under power , complete

Geared motor, electric motor, electric geared motor -Speed: 49 rpm -Power: 0.15 kW -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 54 -Number: 1x motor available Price: per piece -Weight: 8 kg

adjustable gearbox, variable speed gearbox -adjustable -Design: B5 -Angle gear ratio: 1:15 -Inlet shaft diameter: 19 mm -Output shaft diameter: 25 mm hollow shaft -Weight: 26 kg

Gearbox, spur gear, angle gear, reduction gear -Translation: 1:1.5 -Drive shaft: Ø 30 mm -Dimensions: 400/340/H280 mm -Weight: 32 kg

Geared motor 220 volts, angle gearbox, electric motor -Voltage: 220 V -Power: 1100 W 5.0 A -Speed: 12 rpm -right/left rotation -Control switch -Dimensions: 650/220/H230 mm -Weight: 13 kg

max. wheel diameter: 400 mm gear width: 275 mm gear width: 275 mm max. module: 6 weight of the machine ca.: 5,5 t shifting: 100 mm dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power take-off gearbox, hydraulic pump gearbox, gearbox, spur gear gearbox, reduction gearbox -Translation: 1:4 -for: hydraulic pump -PTO shaft input: 35 mm -Splined shaft output: 25 mm -Weight: 6 kg

max. wheel diameter: 180 mm gear width: 45 mm max. module: 4 min. module: 0,5 stroke length max.: 0 - 52 mm spindle taper: innen MK 4 table diameter: 160 mm table bore diameter: 75 mm no. of strokes: 355 - 630 Hub/min feed range: 0,008 - 0,4 mm/Hub dimensions of the machine ca.: 2,30 x 1,50 x 2,36 m power capacity: 6 kW weight of the machine ca.: 2.500 kg Year of construction: Approx. 1970 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.