gear cutting machine used for sale

Thread cutting unit Suhner Tapmaster, serial no.: 623302-00101/12 Auction-ID: A1-45977-228

A CNC glass cutting system Lisec in need of repair is available. Glass thickness range: 3mm-12mm, min. glass dimensions X/Y: 1600mm/1600mm, max. glass dimensions X/Y: 6000mm/3210mm, max. cutting speed: 120m/min, max. transport speed: 40m/min, cutting accuracy: +/-0.15mm, max. table load: 35kg/m², max. payload: 600kg, weight: approx. 6400kg. The X-axis of the machine has a fault. The system can cut diagonally and circularly and automatically grind the glass edges. Documentation available. An on-site inspection is possible.

Serial Number: 77653 • Power: 43 kW • Controller: Selco OSI / NC410 • Additional Notes: Power supply 380 VAC, 3-phase, 50 Hz; rated current 81 A; pneumatic air supply 7 bar; suction air speed 30 m/sec; wiring diagram VB003; Weight: ~11,000 kg; Software: Selco OSI, NC410 (release 2.x manuals present); Total switched-on time: ~16,301 h; Total worked material volume: 133.8 m³; Auction-ID: A7-40553-14

Wet stone cutting table without manufacturer's information presumably.. CEDIMA CTS, 400 V, disc ø max. 900 mm, EGW. approx. 250 kg, function not tested

Wet stone cutting table without manufacturer's information presumably.. CEDIMA, 400 V, disc ø max. 600 mm, PE. approx. 180 kg, function not tested

Wet stone cutting table without manufacturer's information presumably.. JUMBO, 400 V, disc ø max. 900 mm, EGW. approx. 250 kg, function not tested

Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

equipped with a breaker and a loading option, The table is in perfect condition, rarely used. After disassembly, it looks the same as before. Auction-ID: A7-46316-2

Weiler Condor B with Heidenhain 3 - Axle Digital Display -Circumferential diameter over bed 330mm -Turning diameter above the face slide 185mm -Tip height 165mm -Turning length 750mm -Spindle speeds 22-2800 rpm -Spindle passage 40mm -Tailstock quill holder MK 3 -Quill stroke 110mm -Total power requirement 3kW -Heidenhain 3 - Axis Digital Display -Multifix holder -Multifix cassette 3 pieces -3 jaw chuck Forkardt -div. machine key -Machine feet -LED work light -Lining protection with electrical shut-off -Revolver stop -Documentation/Instruction Manual Dimensions: LxWxH 1.8x0.8x1.2 meters / 1040Kg

Fully functional. Free loading, please call if you have any questions

Stable, vertical unwinding and cutting stand for corrugated cardboard, suitable for rolls up to approx. 100 cm high and approx. 60 cm web width. With integrated cutting unit (OCS) and guide profiles for clean unwinding.   Manufacturer marking: OCS (label \"OCS 98004\") Material width: approx. 600 mm (measured) Roll height: approx. 1000 mm Suitable for: 1-wall or 2-wall corrugated cardboard from the roll Auction-ID: A7-46417-33

\" Bundle of used cutting tools and accessories from the workshop inventory. The item includes, among other things: • Various end mills (e.g. coated/uncoated, different diameters) • Disc milling cutters / angle milling cutters (multi-edged) • Tool holders and adapters • DIN 2187 extension sleeves, including MK 3 to MK 2 (original packaging partially available) • Other milling cutters and accessories Weight • Net weight: 13 kg \" Auction-ID: A7-46417-187

Messer MultiTherm 4000Year of manuf. : 2020 ____________Description:Technical specificationsWorking surface:2000 mm x 15000 mmTotal width:5070 mmHeight:1980 mmequipment:-Global Control S with 15 colour touchscreen:-Joystick and handwheel for Global Control S panel:-Cooling for the control cabinet:-Laser diode:-Drives up to a maximum of 35 m/min. AC:-Heat shield without air cooling:-Runway for double-sided longitudinal drive HEB:-OmniFlow oxyfuel supply up to 70 m/h (gas flow control):-ALFA machine cutting torch (internal ignition):-Smartlifter 300:-SensoMat ARKI:-Full addressing of gases:-Light barriers:-Safety device for wheel housing (foot switch)

Working width: 1100 mm Number of discs: 2 Auction-ID: A3-43524-1366

Type: Circular saw for metal profiles Electrical supply: 380V 50 Hz Motor power: 2.2 †4 kW Auction-ID: A7-46477-15

Frame for transporting panel blanks in the CNC production area, loaded on the left and right on a Euro pallet Auction-ID: A1-46501-263

A total of seven identical Tria S.p.A. plastic granulators are available. Rotor knives: 3, stator knives: 2, rotor diameter: 260mm, motor power: 7.5kW, throughput: 150kg-220kg/h, hopper opening: 350mm/300mm, hopper capacity: 30l, discharge hopper capacity: 15l. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

Frame for transporting panel blanks in the CNC production area, loaded on the left and right on a Euro pallet Auction-ID: A1-46501-117

Plasma cutting machine Microstep SPL-P 3001.15, built in 2011 Working area 1500x3000 mm, cuts steel, stainless steel and aluminum, incl. software, incl. plasma source Kjellberg HiFocus 161i with automatic gas console, pressure reducer and Extraction Donaldson Torit DCE for outdoor installation. Last major maintenance at the end of 2024 The plant has already been dismantled , loading is possible.

PTO driven, three-point device, auger Ø380mm, Complete with potato/beet cutting knife. Auction-ID: A1-40137-93

MicroStep 2x plasma 6000 x 3000 mm Longitudinal travel X-axis: 6500 mm Cross travel Y-axis: 3300 mm Cutting capacity: 60 mm Table dimensions: 6000 x 3000 mm Plasmasource: 2x Kjelberg HiFocus 360 amp

Equipment: Cutting unit with reel Knife bar (cutting system) Feed auger Side dividers left/right Hydraulic reel adjustment Transport trolley (1-axle) Trailing drawbar Holder for combine harvester Technology: Working width estimated approx. 6.0 – 7.5 m Uniform crop flow via feed auger Classic grain header system Mechanical/hydraulically operated Used Auction-ID: A7-46606-1031

Technical details Type: Abrasive cutting and grinding discs (mixed lot) Configuration: Assorted discs stored in cabinet (boxed and loose) Disc types: - Cutting discs (thin) - Grinding discs (thicker) Sizes: - Ø 230 mm (majority) - Some Ø 180 mm Specifications (examples): - 230 × 6.0 × 22.23 mm (grinding) - 230 × 4.0 × 22.2 mm (cutting) Brands: Rhodius, Lukas (Primeflex), Bosch Professional, Carborundum Electrite Material compatibility: Steel and stainless steel Quantity: Approx. 120–200 discs (boxed and loose) Packaging: Partial boxes and loose stacks Application: Cutting, grinding, and finishing operations using angle grinders Condition: Mixed (new old stock and used/open units) Dimensions and weight (approx.) Length: 600 mm Width: 500 mm Height: 1800 mm Weight: 120 kg Auction-ID: A7-46498-224

Technical details Manufacturer: REMS (Germany) Type: Manual pipe thread cutting die stock Operation: Ratchet type Thread size: R 1 1/4\" (approx. 1¼ inch) Thread standard: Likely BSPT (R thread) Marking: REMS / No. 43 Application: External threading of pipes Use case: Plumbing, industrial pipework, workshop maintenance Equipment - Ratchet lever - Die head / die stock - Thread size marking R 1 1/4\" Auction-ID: A7-46498-98

Lots of cutting tools consisting of inserts, milling cutters and drills Various manufacturers Transport dimensions: 800 x 600 x 400 mm, approx. 20 kg Auction-ID: A7-46660-17

Slurry separator FR-280 with submersible cutting pump – new machine General data • Model: FR-280 • Condition: unused • Available: immediately Technical data • Motor power: 5.5 kW • Pump power: 4 kW • Voltage: 380V / 50Hz / 3-phase • Processing: approx. 20–30 m³/h • Weight: approx. 650 kg • Dimensions: 2,420 x 830 x 1,320 mm • Screen size: 280 mm • Inlet: 76 mm • Outlet: 110 mm • Material: Carbon Steel + Stainless Steel (SS304) Equipment & Features • Incl. submersible cutting pump • Various screen baskets available • Robust construction • Easy maintenance Recommended Screen Sizes • Pig manure: 0.75 mm • Cow manure: 0.75 – 1 mm • Chicken manure: 0.5 – 0.75 mm Application area • Slurry separation • Agriculture / Biogas • Solid-liquid separation Condition • Ready to use Con ...

including: files, pressure reducing valves Auction-ID: A1-45502-224

In order to submit an offer on this lot, a deposit of € 1500 is required. To receive the bank details necessary for the transfer, please contact the auction contact person at matteo.tosin@surplex.com. As stated in the notice of sale: The lot includes goods that do not comply with EC regulations. Purchase is allowed only: outside the European Community, with documentation drawn up by SURPLEX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Please read carefully the procedures described in the attached notice of sale and follow the instructions as participation in the auction implies their full and unconditional acceptance. Auction-ID: A7-46670-3

Batch of turning steels and cutting tools consisting of various turning steels in various sizes, sometimes with tools Transport dimensions: 1,200 x 800 x 400 mm, approx. 130 kg Auction-ID: A7-46660-16

Only 120 hours of usage. Includes the following items: - 1 x 020080 Hammelmann 15kW Pump 1; 1 x 301500MH Swift-Jet Pro 3000 (510)[MARL/HAMMELMANN]; 1 x 521050 SJP Abrasive Kit; 1 x 000850 SJP Water Only Cutting Head; 1 x 051120-SJP Swift Jet pro On-Site Commissioning /Training; 1 x 051092 Keyboard MK270 Logitech - ENGLISH; 1 x 101393 WIFI Dongle. Full specifications can be found on the PDF files Collection by Appointment Only. This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-46687-1

BSW/ Gas Thread 55°/ 1/4\" to 1\" Auction-ID: A1-46698-260

Reducing sleeves, wrenches, clamping and deburring tools/ contents of 3 drawers Auction-ID: A1-46698-271

NPT/ Gas Thread 60°/ 1/16\" to 1\" Auction-ID: A1-46698-261

UNF 60° Thread/ 3/16\" to 1\" 1/4\" Auction-ID: A1-46698-262

BSW/ Withworth 55°/ 3/16\" to 1\" Auction-ID: A1-46698-259

Set includes 6 precision boring / reaming tools Manufacturer: MAPAL. Includes modular storage rack system Auction-ID: A7-46756-244

Includes assorted metal cutting tools such as drills, end mills, reamers, taps, countersinks and holders. Cabinet with rotating trays. Auction-ID: A7-46756-13

Including Intersaw ecocool 25L, lubecorp Greencut 20L, 2x Bio-circle Schneidkühlmittel 20L Auction-ID: A1-46604-146

Consisting of two pieces Type: GOP 55-36 incl. matching tool case Reference: Common - Lot 17 Auction-ID: A7-46763-139

2x MAPAL WWS indexable cutting tools in original boxes. Auction-ID: A7-46756-208

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

With the Kibani Plasma Cutter 2-in-1, you can take your metalworking projects to the next level! This powerful device combines plasma cutting and MMA welding in one machine, making it perfect for professional craftsmen and enthusiastic DIYers alike. With versatile features and reliable performance, you can effortlessly machine and repair a variety of metal types. Realistic performance for every project With a maximum cutting power of 12 mm, this device delivers excellent results in a variety of jobs. The working range of 20–40A (CUT) and 30–120A (MMA) ensures that you always have the right settings, whether you're doing fine cutting or heavy welding. Thanks to its stable operation and protection against voltage fluctuations, you can count on consistent performance. Durable and complete design The plasma cutter is designed with a robust body and a built-in automatic cooling system,  ...

With the Kibani Plasma Cutter 2-in-1, you can take your metalworking projects to the next level! This powerful device combines plasma cutting and MMA welding in one machine, making it perfect for professional craftsmen and enthusiastic DIYers alike. With versatile features and reliable performance, you can effortlessly machine and repair a variety of metal types. Realistic performance for every project With a maximum cutting power of 12 mm, this device delivers excellent results in a variety of jobs. The working range of 20–40A (CUT) and 30–120A (MMA) ensures that you always have the right settings, whether you're doing fine cutting or heavy welding. Thanks to its stable operation and protection against voltage fluctuations, you can count on consistent performance. Durable and complete design The plasma cutter is designed with a robust body and a built-in automatic cooling system,  ...

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-

Working width: 380 mm; Working height: 150 mm; 1st unit, rotor group: group of 5 rotor brushes oscillating, Ã ̃ 115 each one motor 3 kW; 2nd unit, brush: Scotch Brite Hard / diameter 210mm, vario drive; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power feed: 0.37 kW; Vacuum carpet: yes; Machine length: 1400mm; Machine width: 900mm; Weight: 500kg;