gear cutting machine used for sale

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG cutting unit for cutting off edge protrusions on the front and rear edges -with heavy leadership -Milling unit: swiveling -1x Perske motors -Engine Type: -Power: 0.75 kW -Voltage: Volts -Frequency: 300 Hz -Speed: 8,600 rpm -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 940/620/H350 mm -Weight: 54 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG cutting unit for cutting off edge protrusions on the front and rear edges -with heavy leadership -Milling unit: swiveling -1x Perske motors -Engine Type: -Power: 0.75 kW -Voltage: Volts -Frequency: 300 Hz -Speed: 8,600 rpm -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 990/620/H340 mm -Weight: 52 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG cutting unit for cutting off edge protrusions on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x Perske engines -Engine Type: -Power: 0.22 kW -Voltage: Volts -Frequency: Hz -Speed: 18,000 rpm -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 1240/600/H1100 mm -Weight: 296 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for format processing -with heavy dovetail guide -1x engines Perske -with long shaft -Motor type: KNS 70/12 -Power: 3/4.4 kW -Voltage: 220/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1200/1300/H550 mm -Weight: 290 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x engines Perske -Motor type: KNS 70.12/2.DF1 KNS 51.15.20 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -2x engines Perske -Motor type: KNS 51.15/2D -Power: 1.1/2.2 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2640/5600 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1150/1100/H1200 mm -Weight: 625 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x motor Perske -with long shaft -Motor type: KNS 70.12/2 D1 -Power: 3.0/4.4 kW -Voltage: 220/380 volts -Frequency: 50/100 Hz -Speed: 2870/5880 rpm -1x motor Perske -with long shaft -Motor type: KNS 70.14/4D1 -Power: 3.7/6.0 kW -Voltage: 220/380 volts -Frequency: 50/100 Hz -Speed: 2850/5860 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1100/1300/H1400 mm -Weight: 550 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x engines Perske -Motor type: KNS 70.12-2DF -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1100/600/H1000 mm -Weight: 300 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x engines Perske -with long shaft -Motor type: KNS 70.12-2DF -Power: 5.5/8.0 kW -Voltage: 220/380 volts -Frequency: 50/100 Hz Speed: 2870/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1250/1350/H600 mm -Weight: 400 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: for format processing -with heavy dovetail guide -1x engines Perske -Motor type: KNS 70.12/2.DF1 -Power: 3/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -2x engines Perske -Motor type: KNS 51.15/2D -Power: 1.1/2.2 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2640/5600 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1200/1000/H1200 mm -Weight: 600 kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 10-20 mm acetylene 6 bar -Cutting range: 10 to 20 mm -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 24 pieces available -Total Cost -Total weight: 1.2kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 4 bars -Diameter: 19mm -Length: 47mm -Number: 43 pieces available -Total Cost -Total weight: 2.15 kg

Burner nozzles, cutting nozzles, flame cutting system, burner, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm Acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 5 bar -Diameter: 19 mm -Length: 47 mm -Quantity: 22 pieces available -Price/Sale: complete -Total weight: 1.1 kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD PM -Cutting nozzle 6 - 10 mm 5 bar -Cutting range: 6 - 10 mm -Gas: propane methane -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 5 pieces available -Total Cost -Total weight: 0.25kg

Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 22 pieces available -Total Cost -Total weight: 1.1kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, thread cutting quick change chuck -Manufacturer: Bilz/Gewefa thread cutting quick-change chuck MK2 -Intake: Type Bilz WFLK 115 MK 2 -Type: Gewefa 05.056.104 M4xØ4.5xØ3.4 -Type: Bilz WES 1 BK 4.5x3.4 M 4 -Type: Bilz WES 1 B 3.5x2.7 M 5 -Total dimensions: 140/35/H120 mm -Weight: 0.7 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, thread cutting quick change chuck -Manufacturer: Bilz/Gewefa, thread cutting quick-change chuck MK3 -Intake: Type Bilz WFLK 115 MK 3 -Type: Gewefa 05.056.104 M4xØ4.5xØ3.4 -Type: Bilz WES 1 B 8x6.2 M 8 -Type: Bilz WES 1 B KP 6x4.9 M 8 -Total dimensions: 140/36/H140 mm -Weight: 0.9 kg

Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, self-opening thread cutting heads type A2 13 pieces -Size: M16 x 1.75 recording MK3 2 pieces -Size: M10 x 1.5 1 piece -Size: Ø 17 mm 10 pieces -Price/tax: complete -Transport dimensions: 400/250/H270 mm -Weight: 22 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: ABW, Thread cutting chuck MK3 mount -Type: GB3a -Cutting capacity: M12 -M24 -Bore: Ø 33 mm -Number: 2x cutting chucks available -Price: per piece -Dimensions: Ø 80 x 257 mm -Weight: 3.7 kg/pc.

Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: Pittler, self-opening thread cutting heads 2 pieces -Type: Model A No 3d L485 -Size: M7 x 1.25 1 piece -Size: Ø 24 mm recording MK4 1 piece -Price/tax: complete -Transport dimensions: 180/140/H310 mm -Weight: 8.5 kg

Thread cutting head, thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: DL, self-opening thread cutting heads 4 pieces -Type: Model A4 -Size: M18 x 1.75 1 piece -Size: M15 x 2 1 piece -Size: Ø 30 mm 2 pieces -Shaft: Ø 40 mm -Price/tax: complete -Transport dimensions: 230/230/H180 mm -Weight: 20 kg

Injection molding cutting device for injection molding machine, injection molding machine, cutting pliers -Cutting device: for cutting plastic sprues, tabs, overflow cavities, webs, etc. -6 Cutting pliers: Cutting insert/individual components see photos -Price: complete -Total dimensions 1570/770/H680 mm -Weight: 49 kg

Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: WMW, thread cutting device type GSA 1 -Recording: MK1 / B12 -Reversing gear: Quick return integrated -Clamping diameter: max 6 mm -Thread cutting sizes: M2-M4 -Number: 2x thread cutting chucks available -Price: per piece -Dimensions: 125/100/60 mm -Weight: 0.7 kg

Thread cutting head with chaser jaws, pipe thread cutter, thread cutting stock, hand thread cutting stock, thread cutting stock, cutting stock set, ratchet thread cutting stock -Manufacturer: LUX, Hand Thread Cutting Stock Set 541 424 -Cutting stocks: R1/2, R3/4, R1, R1 1/4, 1 ratchet lever -Transport case -Dimensions case: 360/340/H100 mm -Weight: 5.4 kg

Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head, thread cutting chuck -Manufacturer: Efem, thread cutting head thread cutter four-jaw chuck type G3 -Cutting jaws: not included -Bore: Ø 27 mm -Hole: Ø 40 mm -Dimensions: 160/130/H175 mm -Weight: 3.8 kg

Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades, but without a control unit or sieve. -Manufacturer: RAPID, Side-mounted mill cutting mill -Type: 650-M -Drive motor: 37 kW -Number of cutting blades: 10 pieces -Number of counter blades: 2 pieces -Inlet cross-section: 600 x 300 mm -Rotor width: 610 mm -Rotor diameter: 300 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1385/1200/H2170 mm -Weight: 1208 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: Mounting Ø 50 mm see photos -Bolt circle: Ø 75 x 6 mm -Price/Delivery: complete -Dimensions: 328/190/H8 mm -Weight: 1.2 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, cutting knife, knife set, bacon cutter, gate, cutting gate -Manufacturer:CFS Convenience Food Systems,Cutting knife set for cut knife 300/400 -Type: Art.No.: 39441 1 set = 4 pieces -Quantity: 6 sets available -Price: Per set -Dimensions Bos: 135/70/H55 mm -Weight: 1.2 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: various versions, see photos -Art.No.: 6x 2334850 / 3x 2334830 / 1x 2335190 thickness 1.6 / 1 / 2.7 mm -Price/Delivery: complete -Transport dimensions: 375/111/H20 mm -Weight: 1.6 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: 3 cutting blades, see photos -Hole: Ø 30 mm -Dimensions: 430/310/100 mm -Weight: 22.9 kg

Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system -Manufacturer: Messer, cutting nozzle flame cutting nozzle 6 pieces unused Ovp -Type: Vadura 1215-A -Art.No.: 71615946 -Cutting range: 60-100 mm -Price/Delivery: complete -Transport dimensions: 120/90/H30 mm -Weight: 0.1 kg

Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system -Manufacturer: Messer, cutting nozzle flame cutting nozzle 5 pieces unused Ovp -Type: Vadura 1215-A -Art.No.: 71615945 -Cutting range: 40-60 mm -Price/Delivery: complete -Transport dimensions: 120/90/H20 mm -Weight: 0.1 kg

Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system -Cutting nozzles: Flame cutting nozzles 56 pieces unused Ovp -Type/Quantity: see photos/parts list -Cutting range: 2 - 250 mm -Price/Delivery: complete -Transport dimensions: 200/150/H50 mm -Weight: 0.8 kg

Cutting nozzle, welding torch, MIG/MAG torch, hand arc - piercing torch, gouging torch, gouging nozzle, torch nozzles, cutting nozzles, flame cutting system, torch, oxy-fuel cutting system -Manufacturer: Messer, cutting nozzle flame cutting nozzle 40 pieces Ovp -Type: Vadura 1215-A / A-SD 100-150mm / 2-100mm / 2-150mm -Type/Quantity: see photos / parts list -Cutting range: 2-150 mm -Price/Delivery: complete -Transport dimensions: 250/230/H50 mm -Weight: 0.9 kg

Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: Pittler, self-opening thread cutting head -Type: Model A 3 L 1018/20 -Cutting jaws: not included -Bore: Ø 31/24 mm -Hole: Ø 40 mm -Dimensions: 130/125/H170 mm -Weight: 3.6 kg

Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, wrapping roller, cardboard roll carrier, transport roller, carrying roller -Transport trolley: with cutting device -Roll: Ø 327 x 1800 mm rubberized -Shaft: Ø 50 x 415 mm -Drive shaft/mount: Dimensions see photos -Dimensions: 2355/520/H327 mm -Weight: 286 kg/unit

Manufacturer: Hüllhorst, Year: 1995, Type: KLS 430, Control: Ferrocontroll, Program: 250, Cutting depth mm: 120, Working hight mm: 60, Holz-Querschnitte mm: yes, Positioniergenauigkeit mm: +45-45, Feeding speed max m/min: 3800 kann verlängert werden, Feeding speed continous adjustable: ca.4, Slewing range degrees: yes, Work piece length max mm: no, wood lenght max mm: 500, Loading stations: 5000, Strichcodierung: yes, Saw Blade Diameter mm: 8, Length to slide in mm: yes, Spindles: yes, Drill head vertical controlled spindles: yes, Exhaust diameter mm: yes, machine ready for demonstration: zusätzlich 90 Grad Sägestation und Etikettendrucker, Year :1995

A Krämer & Grebe rotary cutter is available. Bowl volume: 325l, knife speed: 3000rpm, knife peripheral speed: 120m/s, steam pressure: 2-4bar, steam temperature: 120°C-150°C, cooking temperature: 65°C-85°C, cooling temperature: 45°C-50°C, machine dimensions X/Y/Z: approx. 3000mm/2250mm/2050mm, weight: approx. 4300kg. Including accessories such as knives, plastic parts and assembly wrench. The machine is dismantled and the control cabinet and the motor are located in the hall. An on-site inspection is possible.

Lead & Pull Spindle Lathe / WEILER COMMODOR 230 AC -CE marking -Year of construction 2002 -Tip height 230mm -Circumferential diameter over bed 475mm -Circumferential diameter over face slide 270mm -Tip width 1000mm -Spindle speeds 25 - 2000 rpm -Automatic longitudinal/plane feeds -Tapping/Metric/Inch/Module etc. -Spindle head Din 55027 / size 6 -Tailstock MK 4 -Drive power 11KW -Electric lining protection -Multifix base holder with inserts -Three-jaw chuck -Swarf back wall with work light -2x Emergency / Off -Coolant device -Machine feet -Documentation Dimensions: LxWxH 2.6x1.1x1.6 meters / Weight 1900Kg

Weiler Commodor B incl. 3 - axis digital display - GS - Identifier - 3 - Axis digital display - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Four-jaw chuck - Electric lining protection - 2x Emergency / Off - Swarf back wall - Coolant device - Work light - Multifix with inserts - Documentation Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Cutting table FRITSCH, type: FT 450-L - in very good condition - Many cutting rollers and knives available - El. Connection: 400 V, 50 Hz, 3.0 A, 1.5 kW, 24 V DC Visits and test runs are welcome

consisting of: 8 large shelves, Fabr. HEGLA, type: FLB, load capacity: 40,000 kg each, for lengths up to: 6,000 mm, tilting table/glass support, Fabr. HEGLA/HAGER, year 1988, Ser no. 0880342, Floatglasschneid- u. Brechtisch, Fabr. HEGLA, cutting bridge, Fabr. HEGLA, type: OPTIMAX 6032ES, built in 1996, Ser no. 6079, Net weight: 6,500 kg, Storage table, Table surface: approx. 3200x6000 mm, with operating terminal, PC tower, monitoring monitor, lattice enclosure and light barrier system

Size: approx. 3000x6000 mm, with control unit, own weight: 3500 kg

consisting of: tilting table, Fabr. HEGLA, type: ART6032, built in 2005, Ser no. E7662, net weight: 3,900 kg, surface layer unit, cutting table with cutting bridge, Fabr. HEGLA, type: VSG A46-MT, year 2003, Ser-No. 2118, footprint: approx. 3200x7000 mm, dead weight: 11,000 kg, max. working pressure: 6 bar, with control unit, lattice housing and light barrier system

CNC Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of Make: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x Plasma with power source Kjellberg HiFocus 161i Preparation for retrofitting oxy-fuel burners Kemper System 8000 filter system with pre-separator Asper Basic nesting software on the CNC control

Paper Cutting Board DAHLE 533

The CombiCut oxyfuel drilling system from Microstep offers a cost-effective alternative to high-performance laser cutting systems, especially for thicker sheets. Manufacturer: Microstep Model: CombiCut Year of Manufacture: 2022 Technical specifications: - Cutting area: 6000 x 2000mm - Drilling unit: 26.8 kW – up to M24, drilling up to 40 mm - Includes calibration unit for drilling tools - Includes tool changer (6-position – at the end of the table) - Filter system , suitable for indoor installation - Cutting thickness up to 150mm - Includes BG-compliant safety technology (light barrier) - Includes guided tours (S49) - The portal is driven on both sides for high precision. - Operating hours: 95 hours drilling, 587 hours oxy-fuel - Total hours: System switched on 5600 hours - No technology expansion possible - No CAM software required – the system is compatible with almost any C ...

For sale is a high-quality lead and pull spindle lathe from the renowned German manufacturer Weiler, model Condor VS 1. The machine convinces with its high precision, robust construction and durability and is in a very well-maintained and technically perfect condition. Ideally suited for the workshop, single part production and precise turning work. General information: Machine Type: Lead and Pull Spindle Lathe Manufacturer: Weiler Model: Condor VS 1 Year of construction: approx. 1977 Condition: Well maintained, technically perfect Availability: Immediately available Technical data: Max. turning diameter over bed: approx. Ø 330 mm Max. turning diameter via support: approx. Ø 170 mm Max. turning length: approx. 800 mm Bar passage: approx. Ø 38 mm Spindle: Speed range: approx. 24 – 2,800 rpm Feed & Thread: Feed range: approx. 0.037 – 1.253 mm/rev  ...

Cutting center Type: Cut 6120 Manufacturer: Holz-Her Year: 2010 Control: HOLZHER CUTCONTROL 2 Cutting length: 4400 mm Max overhang of the saw blade:82 mm Main motor: 11 kW (for discs Ø 350 mm) Independent pre-cutting motor: 2.2 kW Feed speed: continuously adjustable up to 100 m/min Dimensions: 9730 x 6450 x 1650 mm Integrated label printer Air cushion tables for easy handling of heavy plates Machine in good condition, fully functional Find more here - / Contact us at -

Office supplies cutting board A4, laminator GBC Fusion 3000L, document shredder DAHLE 22312

Thread cutting unit Suhner Tapmaster, serial no.: 616466-00201 Auction-ID: A1-45977-227