gear cutting machine used for sale

Servo motor, geared motor, electric motor, micro geared motor, mini geared motor, DC motor with planetary gearbox -Manufacturer: Nucleus, servo motor with gearbox, micro geared motor -Type: unfortunately no exact type designation -Item No.: FUK1101 -Tension: -Shaft: Ø 20 mm / M8 -Number: 9x geared motors available -Price: per piece -Dimensions: Ø 40 x 170 mm -Weight: 0.5 kg/pc.

DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer: VEVOR, DC geared motor with sprocket -Type: BY1016Z -Voltage: 24 V -Power: 350 W -Technical data: see photo of the nameplate -Wave: mm -Number: 1x motor available -Dimensions: 145/125/H130 mm -Weight: 2.8 kg

Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Chiaravalli, worm gear motor -Speed: 54 rpm -Transmission: Type CBFV040 i 25 -Engine: Type CHT 63C4 B14 0.22 kW -Protection class: IP 55 -Hollow shaft: Ø 18 x 78 mm -Number: 2x geared motors available -Price: per piece -Dimensions: 315/118/H155 mm -Weight: 7 kg/pc.

Geared motor, electric motor, electric geared motor, spur geared motor -Type: LR87/D132S4/47.58/M1/270 i 47.58 with forced cooling fan -Speed: 30.47 rpm -Power: 5.5 kW -Shaft: Ø 50 x 100 mm -Design: B3 -Protection rating: IP54 -Quantity: 1 piece available -Price: per piece -Dimensions: 885/320/H300 mm -Weight: 115 kg

Servo motor, electric motor, DC motor, stepper motor, compact asynchronous motor -Manufacturer: SEW Eurodrive, DC geared motor type ECG-A2M-09-A-K0 -Voltage: 24V -Translation: 9 -Shaft: Ø 16 x 26 mm -Technical data: see photo of the nameplate -Quantity: 1x motor available -Dimensions: 230/48/H48 mm -Weight: 1.2 kg

DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer: Ott, Servo geared motor BLDC worm gear motor -Type: TBSL043030010-110 -Voltage: 24 V -Speed: 300 rpm -Transmission: Transtechno i= 10 -Shaft: Ø 14 x 63 mm -Quantity: 1x geared motor available -Dimensions: 215/63/H95 mm -Weight: 2.3 kg.

DC motor, geared motor, electric motor, DC geared motor -Speed: 200/2000-3000 rpm -Power: 3.2 kW -Design: B3 -Shaft diameter: Ø 50 mm -Protection class: IP 44 -Weight: 220 kg

DC motor, geared motor, electric motor, DC geared motor -Speed: 200/2000-3000 rpm -Power: 3.2 kW -Speedometer -Design: B3 -Shaft diameter: Ø 50 mm -Protection class: IP 44 -Weight: 220 kg

Adjustable geared motor, variable speed geared motor, electric motor -Manufacturer of gearbox: Lenze, Type: 11.431.10.08.1 -Manufacturer Motor ATB Type: ERFY 0.55/4-7 -Motor power: 0.37 kW -Adjustable speed range: 111 to 617 rpm -height of shaft axis: 50 mm -Drive shaft: Ø 16 mm -Number: 2 motors available -Price: per piece -Dimensions: 370/254/H190 mm -Weight: 14.5 kg

Geared motor, electric motor, three-phase motor, right-angle geared motor -Speed: 124 rpm -Power: 0.75 kW -Brake -External fan -Design: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Number: 8x motors available Price: per piece -Dimensions: 620/248/H270 mm -Weight: 50 kg/piece

Geared motor, electric motor, three-phase motor -Speed: 83/85/88/105/142/175 rpm -Power: 4 kW -Shaft diameter: Ø 50 mm milled down to 30 mm -Hole: Ø 65 mm -Protection class: IP 44 -Dimensions: 880/300/H470 mm -Weight: 180 kg

DC motor, geared motor, electric motor, DC geared motor -Speed: 200/2000-3000 rpm -Power: 3.2 kW -Speedometer -Design: B3 -Shaft diameter: Ø 50 mm -Protection class: IP 44 -Number: 1x motor available Price: per piece -Weight: 220 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Motor EMOD type EEDF 65S/4 -Manufacturer: Gearbox Getriebebau Nord type SK.5301 SU-63 S/4 ED -Speed: 4.1 rpm -Power: 0.12 kW -Construction: hollow shaft angle -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 360/135/H190 mm -Weight: 15 kg

Welding manipulator Type: P82 14VF Hydraulic lifting and tilting Electric turning MANIPULATOR: yes Capacity: 9,5 ton

lasmanipulator elektrische tafelrotatie handmatig kantelen van de tafel

Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: Flender Himmel, geared motor -Type: Z10-M1C4 -Speed: 101 rpm -Power: 0.37 kW -Protection rating: IP54 -Shaft: Ø 16 x 30 mm -Design: B6 -Dimensions: 335/185/H160 mm -Weight: 12.7 kg

Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Handover: in its current condition as inspected -Speed control: Cover damaged, handwheel missing (see photos) -Manufacturer: Flender Himmel, adjustable geared motor -Type: LK 02-M1C4 -Speed: 160-1600 rpm -Power: 0.37 kW -Protection rating: IP54 -Shaft: Ø 14 x 30 mm -Dimensions: 430/210/H140 mm -Weight: 16.3 kg

Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: Flender Himmel, adjustable geared motor -Type: LK 02-M1C4 -Speed: 160-1600 rpm -Power: 0.37 kW -Protection rating: IP54 -Shaft: Ø 14 x 30 mm -Dimensions: 430/210/H140 mm -Weight: 16.3 kg

Brand SEW Eurodrive Type R07 DR63L4 TF AND8 Voltage Volt 3 fase 400 volt Force KW 0,25 KW Rotational speed RPM 405 RPM Shaft size mm Units in stock 1 Length 35.00cm Width 18.00cm Height 15.00cm

Brand SEW Eurodrive Type RF07 DT56L4/AND8 Voltage Volt 3 fase 400 volt Force KW 0,12 KW Rotational speed RPM 284 RPM Shaft size mm 20 mm Flens pasrand 80 mm Units in stock 1 Length 30.00cm Width 20.00cm Height 10.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)

A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible.

Geared motor with sprocket incl. connection forward/back Motor approx. 3 KW see pictures Condition: unchecked (6) Auction-ID: A7-45761-858

Flat geared motor, geared motor, electric motor, electric geared motor, flat geared motor, flat geared motor -Manufacturer: Nord, flat geared motor -Type: SK 2080A-80 L/4 i= 10.27 -Speed: 135 rpm -Engine: Type SK 80 L/4 -Power: 0.75 kW -Hollow shaft: Ø 30 x 100 mm -Protection class: IP54 -Dimensions: 340/310/H215 mm -Weight: 22.7 kg

USED GEAR MANUFACTURED BY JOHN BROWN ENGINEERING .MADE IN USA TOTAL 17 UNITS

A horizontal Höfler CNC gear grinding machine is available. Machining diameter: 650mm, min. workpiece diameter: 30mm, max. gear width: 530mm, module range: 1.5-18, max. helix angle: 40°, table diameter: 490mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3000mm, weight: approx. 22000kg. Including Rittal cooling unit and ISI extraction system. The machine has been out of operation since 2010. Documentation available. An on-site inspection is possible.

Unused industrial worm gear gearbox suitable for continuous operation under heavy loads up to 25 Nm; die-cast aluminum alloy L 2630 housing with frontal mounting via four M6 screw holes; output shaft Ø 14 mm × 18 mm with wedge slot Auction-ID: A1-45170-71

Batch of electric motors & automation Condition: unused + used Auction-ID: A1-46070-188

Industrial gearbox / drive unit make Stöber. The units come from stock and were not installed. Manufacturer: Stöber Antriebstechnik GmbH + Co. KG Type: S402SF0350 Condition: unused / Stock goods Type: S402SF0350 Gear ratio: i = 34.92 Oil: CLP 220 Oil volume: 2.70 l Auction-ID: A7-46417-379

In stock on pallet, total dimensions approx. 1200x800x700 mm Auction-ID: A1-45790-573

In stock on pallet, total dimensions approx. 1200x800x700 mm Auction-ID: A1-45790-571

Functional safety (FS) : 04 Speed [r/min] : 1781 / 58 Total ratio [i] : 30,82 / infinite Ma max [Nm] : 4.300 Output torque [Nm] : 3060 Service factor SEW-FB : 1,40 Mounting position : M1AB Term.box.pos.[°] / cable entry : 180 (L) / position 3 Lubricant / -volume [l] : CLP HC 220 Synth.Oil / 7,00 Paint coat : Top coat RAL7031 (blue gray) Please also take a look at the attached PDF document. Contact: gabor.racz@surplex.com +36304509673 Auction-ID: A7-46444-6

Functional safety (FS) : 04 Speed [r/min] : 1781 / 58 Total ratio [i] : 30,82 / infinite Ma max [Nm] : 4.300 Output torque [Nm] : 3060 Service factor SEW-FB : 1,40 Mounting position : M1AB Term.box.pos.[°] / cable entry : 180 (L) / position 3 Lubricant / -volume [l] : CLP HC 220 Synth.Oil / 7,00 Paint coat : Top coat RAL7031 (blue gray) Please also take a look at the attached PDF document. Contact: gabor.racz@surplex.com +36304509673 Auction-ID: A7-46444-5

Functional safety (FS) : 04 Speed [r/min] : 1781 / 58 Total ratio [i] : 30,82 / infinite Ma max [Nm] : 4.300 Output torque [Nm] : 3060 Service factor SEW-FB : 1,40 Mounting position : M1AB Term.box.pos.[°] / cable entry : 180 (L) / position 3 Lubricant / -volume [l] : CLP HC 220 Synth.Oil / 7,00 Paint coat : Top coat RAL7031 (blue gray) Please also take a look at the attached PDF document. Contact: gabor.racz@surplex.com +36304509673 Auction-ID: A7-46444-3

Functional safety (FS) : 04 Speed [r/min] : 1781 / 58 Total ratio [i] : 30,82 / infinite Ma max [Nm] : 4.300 Output torque [Nm] : 3060 Service factor SEW-FB : 1,40 Mounting position : M1AB Term.box.pos.[°] / cable entry : 180 (L) / position 3 Lubricant / -volume [l] : CLP HC 220 Synth.Oil / 7,00 Paint coat : Top coat RAL7031 (blue gray) Please also take a look at the attached PDF document. Contact: gabor.racz@surplex.com +36304509673 Auction-ID: A7-46444-4

Functional safety (FS) : 04 Speed [r/min] : 1781 / 58 Total ratio [i] : 30,82 / infinite Ma max [Nm] : 4.300 Output torque [Nm] : 3060 Service factor SEW-FB : 1,40 Mounting position : M1AB Term.box.pos.[°] / cable entry : 180 (L) / position 3 Lubricant / -volume [l] : CLP HC 220 Synth.Oil / 7,00 Paint coat : Top coat RAL7031 (blue gray) Please also take a look at the attached PDF document. Contact: gabor.racz@surplex.com +36304509673 Auction-ID: A7-46444-2

Functional safety (FS) : 04 Speed [r/min] : 1781 / 58 Total ratio [i] : 30,82 / infinite Ma max [Nm] : 4.300 Output torque [Nm] : 3060 Service factor SEW-FB : 1,40 Mounting position : M1AB Term.box.pos.[°] / cable entry : 180 (L) / position 3 Lubricant / -volume [l] : CLP HC 220 Synth.Oil / 7,00 Paint coat : Top coat RAL7031 (blue gray) Please also take a look at the attached PDF document. Contact: gabor.racz@surplex.com +36304509673 Auction-ID: A7-46444-1

max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...

max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...

max. wheel diameter:275 mm gear width: mm max. module: weight of the machine ca.:9,4 t dimensions of the machine ca.:3,7 x 3 x 2,82 m min. number of teeth:5 max. number of teeth:2000 range of tooth size:20 mm max. gear width (internal machining):58 mm X-axis:325 mm y-axis:350 mm Z-axis:475 mm Bevel gear milling machine Gleason Pfauter including Promot Automation

Working width: 400 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 2; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Tynex brush, 80 grit, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 3 kW; Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1400mm; Weight: 550kg;

Working width: 600 mm; Working height: 5mm to 300mm; minimum workpiece length: 250 mm; Aggregates: 2; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Tynex, diameter 210mm; Height adjustment: electric; Altitude display: digital; Feed speed: 4 - 14 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 4 kW; Motor power feed: 0.37 kW; Machine length: 1400mm; Machine width: 1500mm; Machine height: 1600mm; Weight: 700kg;

Working width: 600 mm; Working height: 220 mm; minimum workpiece length: 250 mm; Aggregates: 4 ; 1. Random System saw-cut unit: saw-cut look; 2. Brush: Metal, diameter 220mm; 3. Brush: Tynex grit 60, diameter 220mm; 4. Brush: Tynex grit 120, diameter 220mm; Height adjustment: handwheel; Height indicator: mechanical counter; Feed speed: 4 - 12 m/min; Motor power sawingrauhaggegat: 1.1 kW; Motor power brushes: 4 kW; Motor power feed: 0.37 kW; Machine length: 2800mm; Machine width: 1500mm; Machine height: 1600mm;

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Combi with 11.1.073 Novopac Shrink tunnel Remaining: 3 parts Chassis number: 4395905 Weight: 1,0 tons Power: 4 kW Air pressure: 7 bar L x w x h first part: 2600 x 1700 x 2000 L x w x h second part: 3200 x 2400 x 1700 L x w x h third part: 1775 x 3300 x 1500 Working height: 85 cm. Transport size L x W x H: 2,6 x 1,7 x 2,0 + 3,2 x 2,4 x 1,7 + 1,775 x 3,3 x 1,5 Min.-max. glass thickness: Max 300 mm Min.-max glass size: Max 1460 mm width Condition machine : Repaired after malfunction Control type: Automatic Electric. Connection: 400V Documentation: Available Instructions: Available Electric diagram: Available Parts list: No Remaining: Combi with no. 23073 Photos/film available: Photo's available

The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

TECHNICAL DATA: Clamping height max mm: 1040 Tenoning depth max mm: 150 Slot length max mm: 340 Main motor power HP: 3 Weight Kg: 340

Offer via gebr. refurbished - pipe cutting and chamfing machine Fabr. GF Type RA6 Saw was completely overhauled and tested. - Engine completely new - Gearboxes restored and new seals specifications: Pipe outer diameter 75-183mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed levels electronic 1 - 6 Power 1800 W incl. mounting plate used, in good condition.