gear cutting hob used for sale

ZF MARINE GEARBOX ZFW 4610 5.037:1

TWIN DISC MARINE GEARBOX MG 516 RATIO 6:1 RUNNING TASKS OUT IN GOOD CONDITION

SEW Eurodrive Motor SEW RF 47 DT90L4/BMG/MM15

Power: 6KW , Ratio: 320:1 , Speed in/out: 1.450 / 4,53 , Shaft ø in: 70mm. , Shaft ø out: 125mm. (hollow)

Bevel gearbox, KS35FH 17,5:1 13R Sa.S29, Grässner, mint condition -60% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! Current new price approx. € 8,600 excluding VAT The gearbox was purchased from a company's spare parts warehouse, has only minor signs of storage, has never been used and is completely new. Bevel gearbox, KS35FH 17.5:1 13R Sa.S29, Grässner, as good as new -60% 1235FH000051, I=17.5:1 including flange B5-VK142/165/130 F7 and hollow shaft d1=24x53 Gearbox with reduced backlash Angle of rotation on shaft d2 (without load) less than 5 angular minutes Output shaft d2 extended for shrink disc connectnio Installation position: All shafts horizontal 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer,  ...

SOLD MARINE GEARBOX WITH PTO GUASCOR R360 4,4:1 SERIAL NUMBER 113058 MANUFACTURING DATE 13-11-2009

Precision planetary gearbox, i=8, PLFHP140-008-SSSE3AK-E38, Neugart, new Please note: This is an original Neugart product and not a replica from Special price If you have a VAT number, we will gladly issue you an invoice without VAT. New! The part was purchased from a company's spare parts warehouse, is in its original packaging, has never been used and is completely new. Drive side: Hollow shaft D 50 mm, centring 180 mm, pitch circle 215 mm, z=4, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law appl ...

Built: 2003 Condition: new Transmission ratio: 26.3 Input speed (n1): 2000 rpm Output speed: 76.2 rpm Efficiency: 0.94 Dimensions: Length 790 mm (without shaft), 966 mm with shaft Width: 450 mm Height: 300 mm Shaft diameter: 155 mm Weight: 352 kg For further technical information, please refer to the uploaded data sheet.

No.: 469544 Comm.: 63008879 Y.O.m.: 2014 Capacity: 3m3/h at 145 rpm 3.5m3/h at 177 rpm Pressure: 6 bar, Temp. 95°C LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

Flat gear brake motor, ADE 50 TD, Demag, mint condition -60% Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - Comes from a spare parts warehouse of a certified production facility, - has very slight signs of storage, Flat gear brake motor, ADE50TD-D1.3-65-0/ 112, Demag, - Output speed 6.1/24.6 rpm - Motor speed 685/2760 rpm - Power 0.290/1.200 kW Motor protection class IP 54 Transmission ratio 112.0 - Motor installation position horizontal - Total weight, net approx. 81 kg - 380-400 V, 50 Hz, 2.10/3.20 A 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We wi ...

weight of the machine ca.: 7.800 kg dimensions of the machine ca.: 3.380 x 3950 x 3015 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete production line for bevel gears, consisting of 6 bevel gear milling machines Klingelnberg BF 201 including orders for contract work for sale Technical data Diameter: 240 mm Module: 10 mm Tooth width: 60 mm Dimensions: 2.3 x 2 x 1.7 m Machine weight: approx. 6,700 kg Information and data are non-binding, subject to prior sale Special features: Complete production line consisting of 6 machines with the following accessories: - Bevel gear machine - 1x interchangeable gear set - 1x test block - Mounts (proportionate) - Knife set (proportionate) - Documentation (1xOriginal / data set) Furthermore, contract gear orders could follow, catalogue goods and special bevel gear sets according to customer specifications, complete volume approx. 8,000 components / year. Asking price of the seller 18.000.- VB / per machine

planetary gearbox, 582 32 026, n1 3000rpm, i=10,8, 5,7KW, Atlanta, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D32 mm, centring D130 mm, pitch circle D165 mm z=4 Design without additional base plate 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of  ...

planetary gearbox, 582 32 025, n1 3000rpm, i=10,8, 5,7KW, Atlanta, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D24 mm, centring D130 mm, pitch circle D165 mm z=4 Design without additional base plate 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of  ...

planetary gearbox, 582 32 027, n1 3000rpm, i=10,8, 5,7KW, Atlanta, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - has very slight storage marks, no effect on function - The gearbox was open stored and contaminated with oil mist, which was very difficult to clean. Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D38 mm, centring D180 mm, pitch circle D215 mm z=4 Design with additional base plate 23mm thick 6 months warranty We give you 6 months warranty for these goods from t ...

planetary gearbox, 582 32 025, n1 3000rpm, i=10,8, 5,7KW, Atlanta, used Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - the part was dismantled from a machine, Technical specifications: - 5.7 kW, n1 3000 rpm, i = 10.8 Connection on motor side: - Shaft D40 mm, centring D162 mm, pitch circle D184 z=4 Output side connection: - Bore D24 mm, centring D130 mm, pitch circle D165 mm z=4 Design without additional base plate Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2  ...

20167 ZF BW 251 - 4.792:1 A 0.346 KW/RPM Brand Gearbox ZF Model Gearbox BW 251A Ratio 4.792:1 A Power 0.346 KW/RPM RPM 1800 RPM Serial Number 3815 General condition Taken out running condition With Flexible Coupling With SAE Housing With Controls Mechanical With Mounting Brackets SAE 0 Weight (kg) 880 Dimensions (cm) 100 x 105 x110

Geared motor from SEW . As good as new from bearing resolution SA57DT80N4/C Kw 0.75/0.75/S1 1380/42 Type M4A

Gear motor, electric motor, electric gear motor -Manufacturer: SEW-Eurodrive, gear motor type SA52 DT71D-4BMG -Speed: 9.3 rpm -Power: 0.37 kW -Hollow shaft: Ø 40 x 120 mm -Protection class: IP54 -Brake: 5 Nm -Bearing block: THK HSP 30 -Dimensions: 520/260 / H285 mm -Weight: 36 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Lenze, geared motor type MK 2 i 2.0 BA 10 -Speed: 710 rpm -Motor: Lenze type D 90 / BR 1.5 kW / 1420 rpm -Protection class: IP54 -Shaft: Ø 25 x 45 mm -Brake: 32 Nm -Dimensions: 545/250 / H250 mm -Weight: 34 kg

Gear motor, electric motor, electric gear motor -Engine manufacturer: ASEA type MBT132S -Gearbox manufacturer: Rossi, type RV125U02B -Speed: 99 rpm -Power: 5.5 kW -Construction: B3 -Hollow shaft: Ø 60 x 210 mm -Protection class: IP54 -Dimensions: 470/320/H775 mm -Weight: 149 kg

Gear motor, electric motor -SEW-Eurodrive: gear motor type RF60DT90S4B -Speed: 72 rpm -Power: 1.1 kW -Construction: B5 -Brake: 10 Nm -Diameter shaft: Ø 30 x 60 mm -Protection class: IP 44 -Dimensions: 620/280 / H215 mm -Weight: 41 kg

Gear motor, electric motor, three-phase motor -Gearbox: SEW type R17/A/112GD -Motor: SEW type R17/112GD DR63L4/TF/II3GD -Power: 0.25 kW -Speed: 36 rpm -Shaft: Ø 20 x 40 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 355/180/H140 mm -Weight: 8.5 kg

Geared motor, electric motor, electric geared motor -Engine: FIMEA type LR 63B4 -Gearbox: 150 rpm, with oil level indicator -Power: 0.18 kW -Voltage: 220/380 volts -Hollow shaft: Ø 19/80 mm -Protection rating: IP54 -Dimensions: 165/140/H320 mm -Weight: 7.4 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Power: 0.65 kW -Translation: i = 21.8 -Design: B14 -Shaft: Ø 17 x 20 mm -Dimensions: 300/190/H140 mm -Weight: 12.8 kg

Gearboxes, pinion gears, angular gears, transmission gears -Translation: 1: 11.21 -Drive shaft: Ø 16 x 45 mm -Output shaft: Ø 25 x 50 mm -Dimensions: 315/145/H155 mm -Weight: 9.7 kg

geared motor, electric motor -Speed: 80/40 rpm -Power: 1.0/0.6 kW -Design: B5 -Shaft diameter: 48 x 110 mm -Brake: 23.3 Nm -Protection class: IP 44 -Price: per piece -Quantity: 2 pieces -Dimensions: 690/251/H320 mm -Weight: 55 kg

Gear wheel for mould height adjustment, die casting machine OL1200, Oleopress, new For the aluminium die-casting machine OL1200 from Oleopress, This gear drives the adjusting nut on the column. Special price -50% of the original price! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely as new and in the original packaging. This gear drives the adjusting nut on the column.

Gear motor, electric motor -Speed: 120 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: Ø 18 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 350/200/H190 mm -Weight: 10 kg

Gear motor, electric motor, three-phase motor -Speeds: 200 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 22 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 370/160/H205 mm -Weight: 12.8 kg

Heat treatment oven 1150 0.8x0.8x1.5m t max 1150 C possible various size ovens Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör gienanth Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen schoenheider Herdwagenöfen zirlguss Glühen Härten Tempern Umformen Vorw ...

Gear motor, electric motor, three-phase motor -Speed: 114/228 rpm -Power: 0.8/1 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: 405/225/H210 mm -Weight: 22.3 kg

Gear motor, electric motor, electric gear motor -Manufacturer: DEMAG, gearbox type CM63 / GS -Speed: 21 rpm -Shaft: Ø 28 x 30 mm -Motor: Kobold type KGC 608.28 0.5 kW -Voltage: 220V -Protection class: IP20 -Dimensions: 490/160 / H200 mm -Weight: 25 kg

Gearboxes, spur gears, bevel gears, worm gears -Manufacturer: SEW, Angle gearbox type SSG3W i 75.36 -Speed: 19 rpm with a 1.1 kW / 1400 rpm motor -Drive shaft: Ø 19 x 40 mm -Output shaft: Ø 35 x 70 mm -Dimensions: 360/240/H230 mm -Weight: 31 kg

Gear motor, electric motor, three-phase motor -Speed: 22 rpm -Power: 0.18 kW -Shaft: Ø 20 x 40 mm -Protection class: IP54 -Construction: B5 angle -Dimensions: 325/240/H155 mm -Weight: 9.8 kg

Gear motor, electric motor -Spare parts come: from grinding machine WERKO SKSt 200 -Motor: VEM type KR 63,1/2 THAII -Motor: 220/380 V/0.18 kW -Protection class: IP 44 -Shaft: Ø 20 mm -Dimensions: 410/330/H220 mm -Weight: 35 kg

Dividing head, dividing head, gearwheel, gears, lathe -Gears: 8 pieces -Shaft mount: Ø 28 mm -Teeth: 57/78/87/99/104/114/126/130 -Dimensions: see photo parts list -Dimension total. Ø 198 x 143 mm -Weight: 18.9 kg

Gear, gears, spur gear -Gear: 35 teeth -Shaft mount: inside Ø 60 mm -Measurements: see drawing in the photos -Dimensions: Ø 368 x 78 mm -Weight: 16 kg

Gear, stin gear, angular gear -Gear wheel and V-belt drive: SEW R42W -V-belt drive: O 255 mm -Translation: 1: 11.96 -with: counter bearing -Dimensions: 680/255/H255 mm -Weight: 26 kg

Gear motor, electric motor, electric gear motor -Speed: 378 rpm -Power: 0.75 kW -Hollow shaft: Ø 19 x 79 mm -Construction: B14 angle -Protection class: IP55 -Dimensions: 330/130/H200 mm -Weight: 9 kg

Plummer Block Housings, Plummer Block Housings -Hole center height: 40/Ø 10 mm -Base plate: 145 x 95 mm -Price: per piece -Number: 2 pieces -Dimensions: 145/95/H approx. 65 mm -Weight: 1.3 kg

Gear motor, electric motor -Speed: 23 rpm -Power: 7.5 kW -Design: B5 angle -Diameter shaft: Ø 70 mm -Protection class: IP54 -Dimensions: 910/500/H445 mm -Weight: 278 kg

Gear motor, electric motor, three-phase motor, electric gear motor -3 phase motor voltage: 42/50 V -Power: 0.12 kW -Speed: 25/30 rpm -Construction: B3 angle -Hollow shaft: Ø 19 x 35 mm -Protection class: IP44 -Dimensions: 390/200/H185 mm -Weight: 19 kg

Gearboxes, spur gears, bevel gears, transmission gears, crane gears, hoist gears, grab lifting and closing gears -Translation: 76.1 :1 -P(kW): 43/n1 2000 rpm -Dimensions: 1230/660/H540mm -Weight: 600kg

Planing comb to Maag gear planing machine

adjustable gear motor, variable speed gear motor, electric motor, synchronous worm drive -Ceds Duradrive: Type DAPE-WH003-0250.04633.00 -Motor power: 0.18 kW -Speed: 213 rpm -Hollow shaft: Ø 14 x 75 mm -Construction: B3 -Dimensions: 270/125/H190 mm -Weight: 6 kg

Gear motor, electric motor, electric gear motor, angular gear motor, automatic band saw -Manufacturer: Ruhr gear, angular gear motor -Type: NDK 8760 -Speed: 3000 rpm -Voltage: 200 V/0.15 A -Shaft: Ø 10 x 30 mm -Accessories: V-belt attachment incl. -Dimensions: 245/160/H155 mm -Weight: 4.5 kg

Gears, angular gears, stin gear, angular gear, transmission gear -Translation: i = 1: 1 -Drive shafts: dimensions see pictures -Dimension: Ø 225 x 180 mm -Weight: 9.6 kg

Gear motor, electric motor, electric gear motor -Speed: 75 rpm -Motor: Loher type AL 90LA-4 -Power: 1.5 kW -Protection class: IP44 -Construction: B14 -Diameter hollow shaft: 40 x 120 mm -Dimensions: 540/200/H280 mm -Weight: 41 kg