129,014 used machines on RESALE, but how to find them? Machine Search
Gear motor, electric motor, electric gear motor -Speed: 20 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: 530/240/H220 mm -Weight: 31 kg
Gear motor, electric motor, electric gear motor -Speed: 83 rpm -Power: 0.8 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: mm -Weight: 51 kg
Six geared motors Lenze in mint condition are available. Gear ratio: 7.617, motor type: G50BB160MVBR3C00, oil type: CLP 460, oil quantity: 1.4l, degree of protection: IP55, insulation class: F, efficiency class: IE3, operating mode: S1, max. power: 7.35kW, max. speed: 2580rpm, weight: approx. 70kg. An on-site inspection is possible.
MODUL ZFWZ 1250x14I gear hober (can do 1580 mm) Max. Diameter: 1250 mm Cutting width: 600 mm Module 2-16 Maximum size of the hob: 240 x 280 mm Table diameter: 1020 mm Speeds: 28 – 200 rpm Axial feed rates: 0.28 – 8 mm/min Radial feed rates: 0.1 – 2 mm/min Tangential feeds: 0.16 – 4 mm/min Stand tilt – left/right: +/- 45 Main motor power: 5 / 19.5 kW Power of the rapids motor: 12,5 kW Max. diameter of the part without tailstock: 1,250 mm Max. diameter of the part with tailstock: 800 mm Weight of the machine : 16 t Machine dimensions approx. 4.5 x 2.1 x h 3.3 m EQUIPMENT: Extended driven shaft for gear cutting up to Ø 1580 mm Capability to work with hob cutters Ø 235 mm and length 380 mm. Inverter control of the main electric motor. Expanded set of change gears
adjustable gear motor, variable speed gear motor, electric motor -Motor manufacturer: SEW -Gearbox manufacturer: SEW -Motor power: 0.37 kW -Speed: 46 rpm -Construction: B3 -Drive shaft: Ø 30 mm -Protection class: -Brake: 220 V -Dimensions: 550/180/H220 mm -Weight: 31 kg
Gear motor, electric motor -Speed: 14.5 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x geared motors available -Price: per piece -Weight: 22 kg
Gear motor, electric motor, electric gear motor -Speed: 22 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: 35 mm -Protection class: -Quantity: 1x engine available -Dimensions: 620/212/H270mm -Weight: 44 kg
CHURCHILL PH3615 gear hobbing machine Max workpiece diameter 914 mm Max diametral/ pitch- 8 Module, 3 D.P. Horizontal centre distance:-63,5- 559 mm Max horizontal travel 469 mm Height hob centre to worktable: 127- 508 mm Max travel of vertical feed 381 mm Max height worktable to tailstock centre768 mm Table diameter 762 mm Table hole (diameter x depth) 89 x 381 mm Hob dia x length 178 x 203 mm Max travel of hob slide 127 mm Diameter of hob arbor 32 mm Hob spindle speeds, infinitely variable 50 – 200 rpm Vertical feeds 0.38 – 5 mm Main drive motor 10 HP Floor area 3960 x 2130 x 2300 mm Weight 11,500 kg Extended set of change gears Complete documentation Operational variable speed drives for main motor and feed drives
Wheel diameter: 160mm, max. wheel width: 355mm, module range: 0.5-4.5, max. cutter diameter: 115mm, max. cutter length: 105mm, cutter head swivel range: 120°, speed: 400rpm, distance between centers: 410mm. Machine dimensions X/Y/Z: approx. 2000mm/1500mm/2000mm, weight: approx. 3500kg. An on-site inspection is possible.
Key data: 3500 mm, 20
HÖFLER Porta 3500 CNC Gear Grinder – As Is” with Limited Use We are offering a unique opportunity to acquire a HÖFLER Porta 3500 CNC Spur/Helical, Internal/External Gear Grinding Machine – a rare and powerful machine with low hours, available in As Is” condition at a negotiable price. Machine Overview: • Make/Model: HÖFLER Porta 3500 CNC • Year New: 2007 • Installed: 2010 • Total Hours: Only 6,800 since installation • Design: Later-generation traveling gantry • Condition: Structurally and mechanically sound, but currently not operational due to uninstalled hydraulic drive motor (refurbished and included). • A full assembly report detailing remaining work can be provided upon request. Key Specs: • Max external grinding diameter: 137.8” (3500mm) • Max internal grinding diameter: 31.5” (800.1mm) • Max tooth profile height: 3.15 ...
Gear motor, electric motor, electric gear motor -Speed: 19 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: 640/250/H220 mm -Weight: 38 kg
Gear motor, electric motor -Speed: 125 rpm -Power: 0.55 kW -Construction: B3 -Shaft: Ø 30 mm -Protection class: IP 54 -Weight: 27 kg
Max. wheel diameter: 1600 mm Min. disc diameter: 800 mm Gear width: 560 mm Max. module: 16 Minimum module: 4 Table diameter: 1350 mm Table load capacity: 7000 kg Machine weight: approx. 18 tons Machine connected, can be tested. Machine equipped
Gear motor, electric motor -Speed: 125 rpm -Power: 0.37 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Number: 3x motors available -Price: per piece -Dimensions: 445/230/H200 mm -Weight: 23 kg
Gear motor, electric motor, electric gear motor -Speed: 21.5 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: 40 mm -Protection class: IP 65 -Number: 1x engine available -Dimensions: 680/270/H250mm -Weight: 55kg
Gear motor, electric motor, electric gear motor -Speed: 21.5 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: IP 54 -Number: 2x motors available -Price: per piece -Dimensions: 610/260/H260 mm -Weight: 53 kg
Inv. Num. : 8799 Type: FO-10 Producer: TOS Created: 1958 Parameters: Maximum gear diameter: 1000 mm Maximum module: 10 Machine dimensions: 3120 x 1870 x 2525 mm Machine weight: 9000 kg
Linear drive + planetary gearbox, stroke 880, EGC-HD-220-880-TB-0H-GK, 556825 +.., Festo, mint condition Special price The current price of a similar product is € 5381 excluding VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Delivery consists of: 1) Festo toothed belt axis, liner drive, linear slide EGC-HD-220-880-TB-0H-GK, 556825, current market price € 4.424 Overall dimensions: 1470x380x120mm, 70kg, Slide length 220mm, stroke 1500mm, A blue front cover and a black round rear cover will be supplied at a later date. 2) Neugart planetary gearbox, PLE120-005-SSSB3AF-E19/40/95/115/B5/M8, 42635, Festo number 552197, gear ratio 5:1, cur ...
Gear motor, electric motor, three-phase motor, right-angle gear motor -Speed: 25 rpm -Power: 0.80 kW -Construction: B3 -Shaft diameter: Ø 48 mm -Protection class: EX -Dimensions: -Weight piece: 44 kg
Linear actuator + planetary gearbox, stroke 1500, EGC-120-1500-TB-KF-0H-GV, 556815 +.., Festo, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Delivery consists of: 1) Festo toothed belt axis, liner drive, linear slide EGC-120-1500-TB-KF-0H-GV, 556815, Overall dimensions: 2050x290x120mm, 70kg, slide 300x70mm, stroke 1500mm, A blue cap at the front and a black round cover at the rear will be supplied later 2) Neugart planetary gearbox, PLE080-005-SSSB3AE-E19/40/95/115/B5/M8, 42631, Festo number 552195, transmission ratio 5:1, 6 months warranty We give you 6 months warranty for these goods from the date of invoi ...
Gear motor, electric motor -Speed: 10.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 54 -Dimensions: -Weight: 59 kg
Power: 211 kW - Ratio: 71:1 - RPM in/out: 1.485 / 20,9 - Shaft ø in: 70 mm. - Shaft ø out: 190 mm.
UNUSESD - Power: 75 kW - Voltage: 230 / 400V. - Amperage: 240 / 137A. - Hertz: 50 Hz. - Ratio: 8,26:1 - RPM in/out: 1.480/179 RPM - Shaft ø out: 110 mm - Weight: 887 / 952 KG
Geared motor, electric motor, three-phase motor -Speed: 325/650 rpm -Power: 0.075/0.15 kW -Design: B3 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 1x motor available -Dimensions: 400/230/H230 mm -Weight: 24 kg
Gear motor, electric motor -Speed: 54 rpm -Power: 0.55 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Brake -Price: per piece -Number: 2x available -Dimensions: 580/260/H200 mm -Weight: 40 kg
Gear motor, electric motor, three-phase motor -Speed: 141 rpm -Power: 0.37 kW -Construction: B3 angle -Shaft: Ø 18 mm -Protection class: IP 44 -Number: 2x available -Price: per piece -Dimensions: 320/143/H220 mm -Weight: 9.6 kg
Precision planetary gearbox, i=8, PLFHP140-008-SSSE3AK-E38, Neugart, new Attention: This is an original product from Neugart and not a replica from Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. New! The part was purchased from a spare parts warehouse of a company, is in its original packaging, has never been used and is completely new. Drive side: Hollow shaft D 50mm, centering 180mm, pitch circle 215mm, z=4, 6 months warranty We give you a 6-month warranty for these goods from the date of invoice. In the event of a defect that is not the fault of the buyer, the goods can be returned. We will only refund the buyer the price of the product paid to us. Updating in the case of digital components is excluded. Liability for direct and indirect consequential damage is also excluded. Our terms and conditions apply, see our websit ...
A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/ ...
0°→135° kantel capaciteit afstandsbediening met regelbare snelheid draaiende tafel : 360° 4 klemmen op de tafel Diameter tafel: 2000 mm MANIPULATOR: yes Capacity: 9450 kg Table dimentions: Diameter: 9450 kg - 1720 kg
Gear motor, electric motor -Speed: 204 rpm -Power: 4.0 kW -Construction: B3 -Diameter shaft: Ø 60 mm -Protection class: IP 33 -Dimensions: -Weight: 113 kg
Universal 750 kg MANIPULATOR: yes Capacity: 750 kg Table dimentions: dia 1000 mm Voltage: 220 volt Weight: 2600 kg
gear motor, electric motor -Speed: 4 rpm -Power: 0.25 kW -Design: B3 -Shaft diameter: Ø 50 mm -Protection class: IP 55 -Number: 1x engine available -Dimensions: -Weight: 73 kg
Gear motor, electric motor, electric gear motor -Speed: 45/90 rpm -Power: 0.35/0.5 kW -Diameter shaft: Ø 25 mm -Construction: B3 -Protection class: IP 33 -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 20.4 kg
Gear motor, electric motor -Speed: 42 rpm -Power: 0.55 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Brake -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 31 kg
Gear motor, electric motor -Speed: 32.5/65 rpm -Power: 0.18/0.36 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: -Weight: 22.2 kg
max. wheel diameter: 150 mm gear width: . mm max. module: 5 min. module: 0,5 Control: . total power requirement: . kW weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 Control: weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gear motor, electric motor -Speed: 67 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 55 -Brake -Number: 1x engine available -Price: per piece -Weight: 14.9 kg
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 27/117 rpm -Power: 0.12/0.48 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Brake -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 26 kg
max. wheel diameter: 85 mm gear width: max. 125 mm max. module: 3 Control: ja total power requirement: 30 kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. workpiece diameter... 1000mm Module ... 10- Main engine power ... 7.5kW L x W x H ... 3120 x 1870 x 2525mm Machine weight ... 10000kg
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 54 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Brake -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Weight: 19.5 kg
Gear motor, electric motor -Speed: 32 rpm -Power: 0.55 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Brake -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 30 kg
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 9 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 410/190/H155 mm -Weight: 16 kg
max. wheel diameter: 150 mm max. module: 5 min. module: 0,5 Control: weight of the machine ca.: 10.000 t dimensions of the machine ca.: 6500 × 2700× 3600 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: SIEMENS table surface area: 160 mm weight of the machine ca.: 10 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
