gear box used for sale

Gear motor, electric motor -Speed: 160 rpm -Power: 0.37 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Weight: 23 kg

Gear motor, electric motor, electric gear motor -Speed: 3.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 60 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 127 kg

Gear motor, electric motor -Speed: 117 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: -Weight: 28 kg

Gear motor electric motor Electric gear motor -Speed: 40 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 32 mm -Protection class: IP 44 -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 26 kg

Gear motor, electric motor -Speed: 50 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 26 kg

Hydraulically switchable gearbox for change of direction of rotationHydraulic reverse gear of latheYear of construction approx. 1985Alternating gearbox for fast change of direction of rotationClockwise or counterclockwise rotation- electric hydraulic pump for hydraulic pressure generation (380 volts, 0.25kW)- 2 pieces of solenoid valves for switching from left to clockwise rotation- equipped with pulleys 230 and 200 mm- was driven by a 15 KW drive motor, fast change of direction of rotation with high torque transmission- Drive motor always runs on the right, gearbox is hydraulically activated

Geared motor, electric motor, three-phase motor -Speed: 20/40 rpm -Power: 0.25/0.3 kW -Design: B3 -Shaft diameter: Ø 30 mm -Length: 180 mm -Protection class: IP 44 -Dimensions: -Weight: 25 kg

Column drilling machine GOTHABear power 30 mmSpindle holder MK 3 - long quill, throat depth 350 mmPine stroke 200 mmTable size 460 mmSpindle speed 160 - 750 rpm. 4 stepsFeed rate 0.1 - 0.2 - 0.3 mm/COLUMN diameter 160 mmMotor power 2.2 kWNerg connection 380 volts, 50 Hz- Spindle speed via 4 gear stages- Automatic feed- Rotatable drilling table with mechanical clamping- Table height adjustment via hand crank- Clamping surface at the machine foot 450 x 450 mmSpace required L x W x H 700

Gear motor, electric motor, three-phase motor -Manufacturer engine Bonfiglioli type: 55BN-2 -Gearbox manufacturer Bonfiglioli type: -Power: 0.12 kW -Construction: B5 angle -Diameter shaft: Ø 9 mm -Protection class: -Price: per piece -Number: 2x available -Dimensions: -Weight: 4 kg

Gear motor, electric motor, three-phase motor -Manufacturer Motor Bonfiglioli Type: 56BN/4 -Manufacturer gearbox Bonfiglioli type: -Power: 0.12kw -Construction: B5 angle -Number: 1x available -Weight: 5kg

Column drill INFRATIREA - ORADEA type PH - 031Series. No. 02434 Year of construction 1975Drilling capacity 40 mmSpindle holder MK 4 - short quillThroat depth 320 mmQuill stroke 250 mmTable size 400 x 400 mmColumn diameter 160 mmSpindle speed 85 - 1500 rpm. 6 gear stagesMotor power 2.2 kWNet connection 400 volts, 50 Hz- Spindle speed via 6 gear stages- Clockwise and counterclockwise rotation- Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/U- Drilling table swivelling- Table height adjustment via

Gear motor electric motor Electric gear motor -Speed: 180 rpm -Power: 0.37 kW -Construction: B14 angle -Diameter shaft: 22 mm -Protection class: IP 55 -Price: per piece -Number: 2x available -Weight: 17 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor manufacturer Nord type: SK71L/4 -Gearbox manufacturer Nord type: SK12-71L/4E -Motor power: 0.37 kW -Speed: 45 rpm -Construction: B3 -Drive shaft: Ø 25 mm -Protection class: IP 54 -Dimensions: -Weight: 17 kg

Gear motor, electric motor -Speed: 490 rpm -Power: 2.2 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 52 kg/pc.

A small geared drilling machine Knuth is available. Drilling capacity steel: 25mm, thread cutting steel: M10-M12, spindle taper: MT3, speed: 2900rpm, quill stroke: 400mm, arm reach: 250mm, table dimensions X/Y: 270mm/300mm. Machine dimensions X/Y/Z: approx. 600mm/600mm/1200mm, weight: approx. 200kg. An on-site inspection is possible.

Key data: 630 mm, 8

A used gear pusher Lorenz S8/630 with interchangeable wheels.

Geared motor, electric motor, electric geared motor -Speed: 250 rpm -Power: 1.1 kW -Design: B3 -Shaft diameter: 25 mm -Protection class: IP 65 -Brake Quantity: 1 piece available -Dimensions: -Weight: 42 kg

Gear motor, electric motor, electric gear motor -Speed: 16 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: 30 mm -Protection class: IP 54 -Weight: 29 kg

Gear motor, electric motor, three-phase motor -Speed: 31/62 rpm -Power: 0.37/0.48 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: -Number: 1x motors available -Price: per piece -Dimensions: -Weight: 39 kg

Cleanable transport screw Brand: van Beek (The Netherlands) YOM: 2016 Screw length: 1550mm Screw dia: 310mm The screw can easily be extended to clean. Dimensions ready for use: LxWxH 2800mm x1300mmx1150mm Dimensions ready to clean (extended) LxWxH 4250mm x1300mm x 1150mm Condition: very good Video's available.

Gear motor, electric motor, electric gear motor -Speed: 20/40 rpm -Power: 0.22/0.3 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: -Number: 5x motors available -Price: per piece -Dimensions: -Weight: 38 kg

Gear motor, electric motor -Speed: 46/92 rpm -Power: 0.7/1.1 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Weight: 31 kg

Key data: 630 mm, 8

Max. outer diameter (gear): 630 mm Max. inner diameter (gear): approx. 750 mm Max. tooth width: 180–200 mm Max. module: 8 Shock stroke: up to 220 mm Stroke rate: 47–300 strokes/min Tool holder: MK 4 Drive power: approx. 8 kW Total connected load: approx. 10–12 kW Njbmsww Er Hompw Spjwk Machine weight: approx. 5,500–5,800

Gear motor, electric motor -Speed: 83 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Number: 2x motors available -Price: per piece -Dimensions: 440/240/H210 mm -Weight: 26 kg

I am selling this hobbing machine. Plugged in, can be tested. Many accessories. Technical parameters: Max. wheel: 7100 mm Gear wheel width: 1500 mm Max. module: 45 Table diameter: 4000 mm Cutter diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Planer diameter: 500 mm Planer speed: 9–63 rpm Total power consumption: 47 kW Weight: 160,000 kg

Gear motor electric motor Electric gear motor -Speed: 16 rpm -Power: 0.33 kW -Construction: B3 -Diameter shaft: 48 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Weight: 43 kg

Gear motor, electric motor, three-phase motor -Speed: 20/40 rpm -Power: 0.37/0.48 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 39 kg

Gear motor, electric motor, electric gear motor -Engine manufacturer: Bauer -Gearbox manufacturer: Bauer -Speed: 45 rpm -Power: 1.5 kW -Construction: B3 -Diameter shaft: 40 mm -Protection class: -Dimensions: -Weight: 56 kg

Gear motor, electric motor -Speed: 45 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 33 -Number: 2x motors available -Price: per piece -Dimensions: 440/215/H180 mm -Weight: 21 kg

Geared motor SWE TYPE: R43DT71D2BMG Number:1046485101003996 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg20,21, Qty 1x

TYPE: R43DT71D2BMG Number:1046485101000796 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg 20,21, quantity 1x

TYPE: R43DT71D2BMG Number:1046691501000596 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg 20,21, quantity 1x

Gear motor, electric motor -Speed: 50 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 44 -Quantity: 1 piece available -Weight: 26 kg

Gear motor, electric motor -Speed: 295 rpm -Power: 0.75 kW -Design: B5 -Diameter shaft: Ø 25 mm -Protection class: -Price per piece -Quantity: 2x available -Weight: 22kg

Gear motor, electric motor -Speed: 11 rpm -Power: 0.1 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Weight: 24 kg

Gear motor, electric motor -Speed: 113 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: -Weight: 16 kg

I am selling this machine. Plugged in, can be tested. We can send a video of the machine via WhatsApp. The machine is well equipped Horizontal Gear Hobbing Machine Kolomna model 5B370. YOM – 1974. Max.working diameter- 500 mm; Max. module - 20; Max.workpiece lenght- 3 000mm; Very good working condition. Main technical data: Max working diameter:500 mm; Max diam. of workpiece:900 mm; Max workpiece length:3000 mm; Max modul of workpiece, mm: -by hobbing cutter 20; -by disk cutter 25; Max tilt angle:+45; Max weight of workpiece: 4000kg; Max diam. of hobbing cutters: 300mm; Max length of hobbing cutters:400 mm; Axial feeding: 0,02-575mm/min; Radial feeding: 0,36-7,1mm/min; Overall dimensions, mm: -length: 10770; -width: 4070; -height: 2580; Weight: 27100 kg.

Gear motor, electric motor -Gearbox manufacturer: SEW -Engine manufacturer: SEW -Speed: 20/40 rpm -Power: 0.55/0.66 kW -Construction: B3 -Diameter shaft: Ø 35 mm -Protection class: -Price: per piece -Number: 7x available -Dimensions: -Weight: 53 kg

TYPE: R43DT71D2 Number:10466770602002396 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg 17,03

TYPE: R43DT71D2 Number:1046227901001996 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg17.03

TYPE: R43DT71D2BMG Number:1046405101000796 Year of construction unknown 230/V 0.55 KW 2700/48min IP 55 Kg 20,21, quantity 1x

Gear motor, electric motor -Speed: 133 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Brake -Protection class: IP 54 -Weight: 12 kg

Gear motor, electric motor, three-phase motor, right-angle gear motor -Speed: 16.5 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 54 -Dimensions: -Weight piece: 47 kg

Gear motor, electric motor, three-phase motor -Speed: 84/128 rpm -Power: 0.48/0.75 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Weight: 25 kg

Gear motor, electric motor, electric gear motor -Speed: 3.15 rpm -Power: 0.18 kW -Design: B3 -Diameter shaft: 60 mm -Protection rating: IP 44 -Quantity: 1 piece available -Dimensions: -Weight: 62kg

gear motor, electric motor, electric gear motor -Engine manufacturer: VEM -Manufacturer gearbox: VEM -Speed: 40 rpm -Power: 1.1 kW -Design: B3 -Shaft diameter: 40 mm -Protection class: IP 44 -Quantity: 1 piece available -Dimensions: 580/250/H300 mm -Weight: 41 kg

Gear motor, electric motor, electric gear motor -Speed: 16.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: -Weight: 33 kg

Various geared motors, one with inverter: NORD electric motor 7.5 kW with parallel shaft gearbox ratio 41.94 (No.1) Geared motor MUCHNA type 63A 1.5kW n1/n2 140/18 rpm (No.2) Electric motor 18.5 kW 1460rpm VEM motors (No.3) NORD Geared Motor 11kW with Inverter and External Fan (No4) NORD Gear Motor 5.5kW n2/n1 1450/142 (No5) For prices, nameplates and further details see: kleinanzeigen.de/s-bestandsliste.html?userId=37037422

Gear motor, electric motor -Speed: 83 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 33 -Weight: 56 kg

Gear motor, electric motor -Speed: 27/54/168 rpm -Power: 0.18/0.37/1.1 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Weight: 33 kg