137,983 used machines on RESALE, but how to find them? Machine Search
Gear motor, electric motor -Speed: 626 rpm -Power: 2.2 kW -Construction: B5 -Diameter shaft: 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 460/250/H210 mm -Weight: 31 kg
gear motor, electric motor, three-phase motor -Speed: 20/40 rpm -Power: 0.37/0.55 kW -Design: B3 -Shaft diameter: Ø 35 mm -Protection class: -Quantity: 1 piece available -Dimensions: -Weight: 40 kg
Gear motor, electric motor -Speed: 15/31 rpm -Power: 0.2/0.3 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 54 -Dimensions: 450/210/H200 mm -Weight: 24 kg
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 112 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Brake -Number: 1x available -Price: per piece -Dimensions: -Weight: 21 kg
Gear motor, electric motor, three-phase motor, electric gear motor -Engine manufacturer: RGM type -Manufacturer gearbox RGM type: SN3FL -Speed: 45 rpm -Power: 0.18 kW -Construction: B5 angle -Diameter shaft: Ø 14 mm -Protection class: IP 55 -Dimensions: 290/157/H155 mm -Weight: 5.9 kg
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 4.5 rpm -Power: 0.25 kW -Diameter shaft: Ø 40 mm -Construction: B3 -Protection class: IP 65 -Brake -Number: 1x motors available -Price: per piece -Dimensions: 650/290/H320 mm -Weight: 50 kg
adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.55 kW -Speed range: 8-72 rpm -Motor: adjustable -Drive shaft: Ø 22 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 650/203/H220 mm -Weight: 30 kg
Type M14 M.A. 16,2 EFFICIENCY 27% TURN TO CLOSE 15 RATIO 16:1 MAX IT 136 MAX OT 2200Nm
The machine is in good technical condition, testing is possible by prior arrangement.
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 20/40 rpm -Power: 0.15/0.28 kW -Construction: B3 -Diameter shaft: 32 mm -Protection class: IP 54 -Dimensions: 520/210/H240 mm -Weight: 27 kg
Gearboxes, angular gearboxes, stin gearboxes, angular gearboxes, transmission gears -Translation: 1:2 -Drive shaft: Ø 22 mm -Number: 1x gears available -Price: per piece -Dimensions: 180/110/H110 mm -Weight: 13.3 kg
Spiral bevel gear machine ZFTKK 500/3V. Some of the change gears missing
Condition NEW Brand Siemens Type CAF38 AK90LP4 Voltage Volt 1 chamfer 230 volt Power KW 1500 watt 1,5 KW 111 Nm RPM 95 RPM speed Shaft size mm 25 mm Version Version 32 kilo Units in stock 10 Length 50.00cm Width 25.00cm Height 18.00cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Dalian NET, worm gear motor -Gearbox: Type NMRV 050 1:100 -Speed: 9 rpm -Engine: Type Y2-802-6 -Power: 0.55 kW -Protection rating: IP55 -Shaft: Ø 25 x 90 mm -Dimensions: 390/200/H250 mm -Weight: 18.8 kg
Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Dalian NET, worm gear motor -Gearbox: Type NMRV 1:10 -Speed: 143 rpm -Engine: Type Y2-90S-4 -Power: 1.1 kW -Protection rating: IP54 -Shaft: Ø 28 x 110 mm -Dimensions: 440/220/H260 mm -Weight: 24 kg
Mechatronic drive system, gearbox, spur gear gearbox, bevel gearbox, worm gearbox, Movegear -Gearbox: Angle gearbox -Translation: 31 : 1 -Shaft: Ø 20 x 50 mm / Ø 30 x 25 mm -Dimensions: 280/270/H210 mm -Weight: 24.5 kg
Geared motor, electric motor, electric geared motor -Manufacturer: Ametek, geared motor -Transmission: with toothed belt pulley -Speed: rpm -Engine: Ametek 18323 6330620005 -Voltage: 220/240V -Dimensions: 125/85/H160 mm -Weight: 1.7 kg
Manufacturer: SPITZNAS Type 2E22V-FHP-Z Torque: 50000 Nm Speed: 0-0.15 rpm Shaft: approx.: Ø160 mm Overall dimensions: approx. 1500 x 1100 x 800 mm Discover the high-quality hydraulic gear motor 50000 Nm used B17806, a sophisticated hydrostatic gear motor that convinces in its performance and precision. This high-quality motor is produced by the renowned manufacturer SPITZNAS and promises optimal work results in industrial applications thanks to its outstanding technological advances. With an impressive torque of 50000 Nm and a variable speed of 0-0.15 rpm, this geared motor offers powerful performance for reliable changeovers and efficient process management. The robust shaft with a diameter of 160 mm is ideal for demanding applications in heavy industry and convinces with its durability and resistance. The hydraulic motor impresses with its well thought-out design, in wh ...
Key data: 450
The Klingelnberg PEK 300 H bevel gear testing machine is designed for universal single-flank rolling testing of bevel gears and crown gears. Here, gears can be measured and graphically evaluated by means of single-flank rolling testing. These test methods are particularly suitable for determining defects in the gear geometry such as concentricity and axial running properties, rolling deviations or pitch errors. Here, a practical installation situation of a gear outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools and damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be measured here: » Single-flank deviations Fi', fi', fl', fk' » Crossing, Runout Roundness (Option) » Carrying diagram with digital camera » Pit ...
Geared motor FARMER Type BF50-04/DHE11LA4 Volt 3 chamfer 400 volt 4 KW 56 RPM Hole 50 mm IE2 L 60.00cm W 30.00cm H 50.00cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
Key data: 540
The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of noise and contact pattern tests on bevel gears and hypoid gears. Technical data Diameter: 540 (400) mm Hypoid: ±50 mm mm Pinion spindle Dm: 90 mm mm Dimensions: 1,800 x 1,800 x 1,600 m Machine weight: approx. 2,800 kg Information and data are non-binding, subject to prior sale Special features: The machine is intended for noise and contact pattern tests on bevel and hypoid gears of all gears. By simulating operating conditions, applying different speeds and changing the load states for drive and outlet, the optimal installation distance for standstill can be determined. Digital actual value display for 2 axes Stepless speed adjustment via frequency converter Electrically fused and acceptable ...
Farmer Type BG60-11/D11LA4 3 chamfer 400 volts 5.5 KW 58 RPM Shaft 50 mm L 75cm W 35cm H 35cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
SEW Eurodrive Type SA67 DT90L-4 ZFISITI 3 chamfer 400 volts 1.5 kW 26 RPM Shaft 40 mm L 52.00cm W 25.00cm H 25.00cm
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 161 rpm -Power: 1.5 kW -Construction: B3 angle -Diameter shaft: 35 mm -Protection class: IP 55 -Number: 2x engines available -Price: per piece -Dimensions: 520/270/H300 mm -Weight: 45 kg
Geared motor, electric motor, electric geared motor, spur geared motor Manufacturer: Nord, geared motor -Gearbox: Type SK12-71 L/4 i= 31.19 -Speed: 45 rpm -Engine: Nord type SK 71 L/4 -Power: 0.37 kW -Protection class: IP54 -Shaft: Ø 25 x 50 mm -Dimensions: 455/190/H170 mm -Weight: 16.4 kg
elsto Type F603 UH60 P112 3 chamfer 380 volt 400 volt 3 KW 27 RPM Center 60 mm Center 230 mm L 70cm W 30cm H 60cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
Lenze Type G50BB111MHBR2C MDEMAXX063-42C0C 3 chamfer 400 volt (50 tot 87 Hz ) 0.25 kW / 0.45 kW ( 87 Hz ) 22.44 RPM to 40.6 RPM Hole 25 mm Shaft 30 mm Drive Unit type: E84DGDVB55142PS L 45cm W 20cm H 20cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
Geared motor, electric motor, electric geared motor -Manufacturer: SEW-Eurodrive, geared motor -Type: SAF 37 DR63M4/TF i = 86.36:1 -Speed: 15 rpm -Power: 0.18 kW -Hollow shaft: Ø 20 x 120 mm -Protection rating: IP54 -Dimensions: 335/190/H145 mm -Weight: 11.3 kg
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 66 rpm -Power: 3.0 kW -Construction: B3 -Diameter shaft: Ø 50 mm -Protection class: IP 33 -Foot damaged, see picture -Dimensions: 910/294/H350 mm -Weight: 115 kg
Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Motovario worm gear type NMRV/030 -Speed: 17 rpm i 080.0 -Engine: Neri Motori type T5034 -Power: 0.06 kW -Hollow shaft: Ø 14 x 63 mm -Protection rating: IP55 -Dimensions: 235/100/H130 mm -Weight: 3.5 kg
LENZE MDEMA1M071-42 3 chamfer 400 volts 0.55 KW 7.8 RPM Hole 40 mm L 45cm W 35cm H 20cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
max. wheel diameter: 1000 mm gear width: 200 mm max. module: 10 min. module: 0,5 max. dia. of teeth cutting: 1000 mm min. dia. of teeth cutting: 75 mm table diameter: 1000 mm boring diameter: 400 mm spindle stroke: 0 - 230 mm stroke position adjustment: 250 mm distance between table / ram: 480 / 730 mm dia. of shaper cutter: 8 Zoll taper: Morse 5 tool taper: 1 3/4 Zoll total power requirement: ca. 20 kW weight of the machine ca.: 11 t Standard version - Chip conveyor - Two additional tables with diameters of 850 mm and 1,500 mm - Several cutting tools - Set of interchangeable gears - Program for cutting in 1-2-3-4 passes/cycles - Program for spiral cutting - Several holders and clamps for workpieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Liebherr / Lorenz S800 Gear - Hobbing Machine -Max. workpiece length with counter holder 600mm -Max. workpiece length with retracted counter holder 800mm -Max. travel of the milling carriage 360mm -Largest millable pitch for the largest workpiece 5 Pi / in the normal power range 8 Pi -Pick-up taper - milling spindle MK 5 -Mandrel 22/27/32/40mm -Max. cutter diameter 186mm -Max. cutter length 170mm -Max. cutter displacement 80mm -Milling cutter speeds 40-220 rpm -Feeds infinitely variable / horizontal -Feeds infinitely variable / vertical -Feeds infinitely variable / tangential -Clamping table without water rim 550mm -Clamping table hole 100mm -Mandrel taper MK5 Accessories: 1x pallet interchangeable wheels 1x pallet hob 1x pallet clamping mandrels Documentation Machine feet Dimensions: LxWxH 3.6x1.8x1.9 meters / weight 5000Kg
Inv. Num. : 8974 Type: OFA 16 SC Producer: TOS Generated: Parameters: Machine weight: 5 t
Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Eberhard Bauer, geared motor -Type: D447/166 -Speed: 28 rpm -Power: 3.7 kW -Shaft: Ø 55 x 110 mm -Dimensions: 900/400/H350 mm -Weight: 130 kg
Industrial Gearboxes, Planetary Gearboxes used Manufacturer: SEW Type: XP3FH160/F Year of construction 2020 Power 358-717 kW Torque max: 297711 Nm i=81 n1 931-1863 rpm n2 11.5-23 rpm Shaft drive Ø 100 mm Shaft output see pictures 7200 kg The gearbox comes from a spare parts warehouse and is unused. You can find the right oil cooler here. Possible applications: Conveyor technology -- > drive of large conveyor systems (e.g. opencast mining) Mixers/Extruders -- > Plastics or Asphalt Processing Shredders -- > recycling plants or industrial crushers Changes and errors in the technical data, specifications and prices as well as prior sale reserved.
Gearboxes, spur gears, bevel gears, worm gears, crane gearboxes -Gearbox: Worm gearbox Crane gearbox -Type: unfortunately without a type designation -Translation: i = 7 : 1 -Hollow shaft: Ø 30 x 120 mm / Ø 19 x 43 mm -Dimensions: 210/200/H220 mm -Weight: 13.9 kg
Crane control system, controller, safety control system, safety switch, safety sensor, overload release power sensor, gear limit switch -Manufacturer: DEMAG, Crane control gearbox limit switch set, original packaging -Type: DGS 3 -142 -Item No.: 875 200 44 -Cardboard dimensions: 250/120/H115 mm -Weight: 1.0 kg
Condition Used Brand Siemens Type ZR88-LA132SP4EW Voltage Volt 3 fase 400 volt Force KW 5,5 KW - 137 Nm Rotational speed RPM 384 RPM Shaft size mm 60 mm Flens pasrand 250 mm Version Eigen gewicht 170 kilo Length 110.00cm Width 35.00cm Height 35.00cm Related Products All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)
Condition Unused Brand SEW-Eurodrive Type RX57 DRS71M4 / AND8 Voltage Volt 3 fase 380 volt 400 volt Force KW 0,55 KW Rotational speed RPM 364 RPM Shaft size mm 20 mm Length 40.00cm Width 23.00cm Height 20.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)
DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer: Stöber, DC geared motor type C002NF-0047-PF112 -Speed: 0-641 rpm -Engine: Type PF112 -Voltage: 160 V -Power: 0.6 kW -Shaft: Ø 20 x 40 mm -Dimensions: 395/160/H195 mm -Weight: 19.5 kg
Condition New, old stock Brand SEW Eurodrive Type S37 DRN80M4/BE1/EI7C Voltage Volt 3 fase 400 volt Force KW 0,75 KW Rotational speed RPM 363 RPM Shaft size mm 20 mm Version Brake Length 51.00cm Width 21.00cm Height 15.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)
The Klingelnberg PSR 500 U worm gear testing machine was designed as a universal machine for the flexible testing of worm gears and is used by manufacturers of gear and gear technologies for the process of single-flank rolling testing for worm gear sets EFWP. Technical data Max. worm wheel diameter: 500 mm Max. spindle length: 500 mm Max. spindle diameter: 200 mm Center distance: 0 ... 400 mm Max. measuring speed: 60 rpm Braking torque: 2.5 Nm Max. worm wheel weight: 150 kg Max. spindle weight: 50 kg Table diameter: 300 mm Machine weight: 800 kg Dimensions: 1500 x 1500 x 1600 mm The following parameters can be measured here: • Single-flank deviations Fi', fi', fl', fk' • Crossing, concentricity, roundness (option) • Carrying pattern with digital camera • Pitch deviation • FFT analysis, spectrum Picture shows the machine in its current ACTUAL condit ...
Mobile Laboratory Equipment Trolley / Instrument Trolley on Casters For sale is a sturdy used equipment truck from company laboratory stock. Suitable for holding laboratory equipment, measuring instruments, analysis equipment, computers, printers or other technical equipment. Equipment: Stable metal construction Large upper device/work surface Pull-out middle shelf Additional lower shelf Height-adjustable shelf 4 swivel castors Lateral hole grid for height adjustment Dimensions approx.: Width: 60 cm Depth: 48 cm Height: 85 cm Condition: Used condition with signs of wear due to age and use. The car is stable and fully usable. Scope of delivery and condition according to pictures. Location: 71254 Ditzingen-Heimerdingen, Germany. Price: 99 € net VB plus VAT Preferably pick-up. Prior sale and errors excepted.
GROB C6-A – Cold Rolling Machine Technical Data: Gear Module: up to approx. 2.3 Gear Diameter: approx. 8–80 mm Max. Clamping Diameter: approx. 315 mm Power: 25 kW
Geared motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: DEMAG, geared motor type 13/6 PF 8/2 -Power: 0.07/0.27 kW -Speed: 680/2900 rpm -Wave: see photos -Protection rating: IP54 -Dimensions: 270/210/H235 mm -Weight: 12.7 kg
maximum number of results exceeded
please refine your search
3.000 € 
