gea plant used for sale

General SKULY003 MakeAlfa Laval TypeAlfaFlash MVR system No.DE21-1026 Main Features MaterialStainless steel Motor110 KW Surface1.1 m2 Specified Features - Film evaporator Max. temperature110 °C With variable speed drivecheck With condensercheck MaterialStainless steel 1.4401 (316), Titanium General Year of construction2021 With switchgearcheck Extra SpecificationsThis machine (Elemetal Zinc Sulphate MVR System) is an evaporation/crystallization unit that concentrates zinc sulphate solution past saturation so zinc precipitates as ZnSO₄·1H₂O crystals. The crystals are then separated from the mother liquor in a decanter centrifuge, producing a solids cake for downstream drying and clean condensate that can be reused.&:nbsp:The complete plant/module consists of (main machines/equipment):Feed section: feed pump and feed preheater:Feed to the module: 1065 kg/h, 50°C, 2 ...

This skid mounted pilot pasteurisation plant exisiting out of a inline filter, feed screw pump (Bominox - type RS-22/M - 0,75 kW - n2: 250 rpm), level tank of ± 100 liter (internal diameter 45 cm, internal height 70 cm) with mix agitator (0,18 kW - 665 rpm), pre-heater (tubular heatexchanger), homogeniser (FBF 001), 2x tubular heaters, holding, 2 tubular coolers and a double jacketed ripening tank of ± 250 liter (internal diameter 70 cm, internal height 63 cm) with propellor agitator (0,37 kW - n2: 50 rpm). The pilot pasteurisation plant is previously used for ice cream mixture and only run for 357 production hours., The unit can be used for all kind of different combinations for pasteurisation and homogenising of liquid products, by making different connections on the flowplates., Homogeniser details:, Manufacturer: FBF Italia, Model: FBF 001, Serienr: 06031808, Year: 2006, Max. capac ...

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

Margarine pilot plant with 1x high pressure pump, 3x crystalizer scrap surface heat exchangers (SSHE), 1x pin worker (1 - 2 and 3 liter), 1x phase inverter, 1x cooling unit (R22) and control panel. Working product pressure of the pilot plant up to 80 bar (8000 kPa). Capacity up to 90 kg per hour., - High Pressure Pump, High Pressure Pump for pumping the margarine emulsion through the margarine pilot plant. Gerstenberg & Agger A/S, type Labo Pump 2-22-4 , serial number 12.211, year 1990, product pressure max 80 bar, temperature max 100 °C, capacity max 200 kg/h, motor 415 V - 50 Hz - 1,1 kW. Control panel with Siemens S7-200 PLC., - Scraped Surface Heat Exchanger 01, Cooler., Pilot G&A Perfector - SSHE Cooler Perfector 57 is designed for lenient cooling of medium viscosity, pumpable food like margarine. Gerstenberg & Agger A/S, type Perfector Lab 1x57, serial number 12910, year 1993, dut ...

This Anthracene and Carbazole Purification Plant is a complete industrial rectification and crystallisation system for the production of purified carbazole and anthracene from crude anthracene.The plant offers high-purity output with a design capacity of 2,600 tonnes per year of carbazole and 3,600 tonnes per year of anthracene, making it a proven solution for buyers of used chemical purification equipment. Manufacturer: NJR Type of Machine: Anthracene and Carbazole Purification Plant Design Capacity: - 2,600 t/a Carbazole - 3,600 t/a Anthracene Output Quality: - Purity of Carbazole: greater than 97.0% - Purity of Anthracene: greater than 95.5% Production Process — Three Steps: - Step 1: Crystallisation - Step 2: Rectification - Step 3: Solidification (Granulation) Process Description: - Crystallisation: Static layer crystallisation, 3-stage process. Cooling plates suspended  ...

The Tetra Pak Almix - Scanima Pilot Plant Mixer SPM-100 is a versatile vacuum processing system designed for pilot plants, product development and small-scale industrial production. It combines vacuum mixing, powder induction, high-shear homogenisation, heating, cooling and automated recipe control into one compact unit, making it ideal for producing a wide range of dairy, beverage and food products.The mixer is equipped with an integrated vacuum system that creates a controlled vacuum inside the vessel before and during processing. Operating under vacuum significantly improves powder incorporation by eliminating air, reducing foam formation and preventing oxidation. Powders such as milk powder, proteins, starches, sugar, cocoa, stabilisers and emulsifiers are drawn directly into the liquid through the integrated powder funnel, ensuring rapid wetting and lump-free dispersion while minimi ...

General SKU226Y116 MakeYstral SerialY-PS 638134 TypeYstral Process System Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume1200 Ltr. Motor35 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity400 l. (580 l.) Vessel sizesø 880 x 1320 mm Dished bottomcheck Dished top sidecheck With jacket45 l. Max. temperature140 °C, Jacket: 180 °C With paddle stirrerHydrolysis stirrer Motor4 kW Speed mixing shaft7—84 rpm With homogeniserConti-TDS Motor22 kW, 300—3600 rpm MaterialStainless steel 1.4404 (316L), Stainless steel 1.4435 (316L), Stainless steel 1.4571 (316Ti) With jacketcheck General Year of construction2009 LocationBarneveld With switchgear(as is) Floorspace5,40 x 5,00 m Total height3,60 m Weight7000 kg CEcheck Extra Spe ...

Manufacturer: Scheugenpflug Type of machine: Casting and potting plant line Year of manufacture: Individual components dated 2022 and 2023. Operating history: The system was in operation from approximately August 2022 until the end of 2023 and ran without problems until the line was shut down The line is composed of the following main components. 1. Potting cell with axle system - Type: CNCell - Built in 2022 - Air pressure: 6 bar - Power supply: 400V 3~/N/PE. - Power frequency: 50/60 Hz - Power input: 8.6 kVA - Rated current: 13.8 A - Control voltage: 24 V DC 2. PTS preheating oven - two lanes - Type: FC Curing Oven FC-5Z-57-P-2S-6050-100 - Year of construction: 2022. - Nominal temperature: 100 degrees Celsius - Throughput time can be individually adjusted. 3. Barrel stirring station - Type: Barrel Agitator Station - Built in 2023 - Weight: 800 kg - Air pressure: 6 bar - Power ...

Concrete batching plant 100-120m3/h MIXING SET. FTS 4000 / 3000 horizontal double shaft mixer. (Sicoma, Italy) SET OF 4 HOPPERS AGGREGATE LIFT SYSTEM. Aggregate elevator belt to mixer. Length: 12,100 mm. Band width: 800 mm. Cement weighing scale with a load capacity of 1,500 kg. Construction in 3 mm thick steel sheet. Weighing system using 3 load cells. WEIGHING AND DOSING OF WATER. Weighing scale with a load capacity of 750 liters. Steel sheet construction. Weighing system using 3 load cells. POWER AND CONTROL PANEL. Watertight cabinet to be located in a dosing booth. Automatic operation. Equipped with SIEMENS electrical mechanisms. COMPUTER SYSTEM FOR AUTOMATION AND MANAGEMENT OF CONCRETE BATCHING PLANT DRY MIX/WET MIX. Dynamic control of production flows. Automatic activation of vibrators and fluidisers. Weight safety control in scales. Dynamic cycle corre ...

Properties Total height 4900 mm Depth 4000 mm Width 5200 mm Manufacturer GEA/ Tds Ahaus Type 1500 Machinery No. 36001027.15.1 Year of construction 2003 Description CIP Appendix No.6 Tank volume and dimensions: CIP Tank 1 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 2 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 3 Volume: 1,000 litres Length: 1,100 mm Width: 900 mm Height: 1,000 mm CIP Tank 4 Volume: 1,900 litres Length: 1,100 mm Width: 900 mm Height: 1,950 mm

USED GEA TUBULAR JUICE PASTEURISER DEAERATOR AND HOMOGENISER 7700 LPH FOR SALE Item #: Usm-187 Category UHT Plants 1) Pasterization plant with deaerator Ø program controlled Pasterization plant for fruit and vegetable juices, with a indirect heating system and regenerative exchange circuit, including a CIP connection and a connected deaerator Ø Manufacturer: GEA Finnah GmbH Ø Type: 6700/077 Ø Year of manufacture: 1998 Ø Max.capacity: 7700 L/h Ø for fruit and vegetable juice : viscosity 25 cp/10°C ; fibre lenght: 4-6mm 2) Homogenizer Ø Manufacturer: GEA Finnah GmbH Ø Type: NS 3075/55 Ø Year of manufacture: 1998 Ø Capacity: 7700 L/h Ø Operating pressure: max. 220bar

Complete CSD PET Bottling Line – 12,400 BPH Manufactured: 2008–2009 | Location: Germany | Available: October 2026 This complete CSD (Carbonated Soft Drink) PET bottling line is designed for efficient and reliable production of carbonated beverages. The line is composed of high-quality European equipment from leading manufacturers such as SIPA, GEA Procomac, Arol, SMI, PE Labellers, Ventilo, Robopac, and TwinPak. The system is currently still in production, ensuring excellent operational condition and immediate demonstration possibilities. General Line Data Nominal Capacity: 12,400 bottles/hour Effective Capacity: approx. 10,000 bottles/hour Bottle Sizes: 0.5 L 0.75 L 1.5 L Bottle Type: Round PET bottles Cap Types Flat Cap: PCO 1881 Sport Cap: Aptar PCO 1881 Main Equipment Blow Molding Section Blow Molding Machine: SIPA – 8 cavity system Bottle Hand ...

Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

- Toothed gear MWM 12302297 Original - Suitable for several motors - Please note! Price per piece! - 12302297 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrat ...

- Toothed gear MWM 12307524 - Please note! Price per piece! - 12307524 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes into  ...

TWIN DISC GEAR BOX RATIO 4.56:1 SERIAL NO 7S-957

Equipment Manufacturer Power Speed Generator BRUSH 3125 kVA 1500 rpm Gearbox Allen Gears 3860 kW 1500 rpm 1Generator Manufacturer: BRUSH Electrical Machines Limited Main SpecificationsParameter Value Parameter Value Type AC Generator Rated Output 3125 kVA Speed 1500 RPM Voltage 10,000 V Current 180 A Frequency 50 Hz Phase 3 Phase Brushless Excitement 2. Gearbox Manufacturer: Allen Gears Limited Location: Pershore, England Type Epicyclic / Planetary Gearbox Technical Specifications Parameter Value Model APG 23 Serial No. X5/40848 Year 1980 Type Planetary Gear Gear Ratio 9.473 Performance Parameter Value Rated Power 3860 kW Duty Power 3355 kW input Speed 14,210 RPM Output Speed 1500 RPM CT INDUSTRY 2 Rue laennec Rosny sous bois 93110 GSM 06 03 86 59 55

Complete UF system by GEA For concentration of products . Previously used for Yoghurt . All details are in the images attached . Contact us for more information and would you like to inspect.

TO WHOM IT MAY CONCERN ;

Stiebel Gear Type :4281.14.09903.97 Type.nr : 3622-505045314 Art.no : 1190103 Rexroth: 4281 . 14 . 09903 . 9 . 97 3622-505045314

Pressure filler Vipoll GEA type: Visipraktik VKR-ES-DN 12-3 K capacity: up to 3.000 bph double pre-evacuation working hours: less than 1.000 for 330 ml bottles bottle diameter: 50 - 105 mm bottle height: 125 - 370 mm

APE gearbox (Dualbox) geabox Type: Planetary Epicenclic Reducer Brand: APE Allen Gears (UK) Reduction Ratio: 2.247:1 Input Speed: 14,210 RPM Output Speed: 1500 RPM Rated power: 860 kW (service: 3355 kW) Type: Epicacyclic (Planetary) Model: APE 43 Reduction Ratio: 2.247:1 Rated power: 860 kW Power in service: 3355 kW Input speed: 14210 rpm Output speed: 1500 rpm

Type: Epicacyclic (Planetary) Model: APE 43 Reduction Ratio: 2.247:1 Rated power: 860 kW Power in service: 3355 kW Input speed: 14210 rpm Output speed: 1500 rpm Type: Planetary Epicenclic Reducer Brand: APE Allen Gears (UK) Reduction Ratio: 2.247:1 Input Speed: 14,210 RPM Output Speed: 1500 RPM Rated power: 860 kW (service: 3355 kW) Total weight: 1000 kg

Zelfuitlijnende draaiinrichting één aangedreven eenheid één niet-aangedreven eenheid WELDINGMANIPULATOR FOR CYLINDRES: yes Max weight on both supports: 10 ton Number of wheels: 8 wheels Coating material on wheels: rubber

Technical specifications: Type 6500/075 as a processing plant with an indirect heating system. Serial number of the plant: 95711701. Year of manufacture: 1996/2003. Capacity: 7,500 l/h - Product inlet temperature approx. 6 °C - Sterilization temperature 139 °C - Product outlet temperature approx. 25 °C Products: Long-life milk, milk-based mixed drinks, coffee cream, cream, various liquid products. Including: - Homogeniser NIRO-SOAVI, Type 3075/55, Operating pressure 220bar, 2.stage 45bar. - GEA-CIP-Unit, FINAMAT Complete with valves and pumps, - Aseptic-tank, GEA-FINNAH, Make: RITTER GMBH, Serial No. 95710 903 Operating pressure: -1/+3.5 bar pü at 150°C Operating volume 10.000 ltr. - Several Electrical and pneumatic Controll cabinets. All equipment is still complete installed.

UTECO EMERALD C.I. Gesrless, 8 colors, Max printing width 1.000 mm, quick sleeva change on anilox and printing sleeves, automatic washing, longitudinal register with drive/ motorised, trasversal register, viscometers, Video camera, Web guide, automatic unwinder, 1.000 mm max Ø, automatic rewinder, 1.000 mm max Ø, computer suvervision of the machine, Connected and testable, availability: immediate, working width: 1.000 mm.

Used GEA table cooler type GES/GES with 12 fans. Manufacturer: GEA Ergé-Spirale / Soramat S.A. Technical data according to nameplate. Used GEA table cooler type GES/GES with 12 fans. Manufacturer GEA Ergé-Spirale / Soramat S.A. Technical specifications according to nameplate. Commercial sale / resale.

Zelfuitlijnende lasrolstelling één aangedreven eenheid één niet-aangedreven eenheid minimale/maximale werkstukdiameter: 500/4500 mm snelheid: 70 gt; 1200 mm/min vermogen: 2 kW - 15,8 ampère WELDINGMANIPULATOR FOR CYLINDRES: yes Max weight on both supports: 20 ton Number of wheels: 8 wheels Coating material on wheels: rubber

Palletizer GEA Procomac Opera year of manufacturing: 2009 including: - complete pallet conveyor system - pallet magazine - Robopac stretch wrapping machine - mother pallet handling - Logopack pallet labelling system The GEA Procomac Opera is a low-level infeed palletizer designed for low to medium production capacities. It offers automatic changeover for different pallet patterns and pallet sizes, ensuring reliable and flexible end-of-line palletizing. Availability: End of September 2026

Decanter GEA UCD 305-00-32 Control Panel Year 2020

6-Colors R25476/17 ALLIED GEAR Labels Flexographic Printing Machine Model: Flexomaster Built: 1995 Availability: instantly 6 colors 6 Anilox rollers Paper cutters Lamination Transporter Power unit UV dryer Video body plate (JM Heaford) Still in operation: Yes Available: by arrangement

The company Centrimax - Winkelhorst Trenntechnik GmbH is specialized for over 30 years on the delivery of used centrifuges, like decanter centrifuges, disc stack centrifuges, peeler centrifuges, pusher centrifuges, worm screen centrifuges etc., of the makes GEA Westfalia Separator, Alfa Laval, Flottweg, Siebtechnik etc. The centrifuges are delivered by us fully reconditioned and with warranty. Our stock includes several hundreds of centrifuges for the clarification and the separation of suspension and liquid mixtures, as well as for the thickening and concentration of sludges. Ask us if you search consultation in the solution of problems in the area of the centrifugal separation technology. Buy from the specialist!

plate heat exchanger Gea Ahlborn with 2 centrifugal-pumps:(hotwaterpump and recirculationspump) Manufacturer: Gea Ahlborn 6 Sections: preheater 1,preheater 2,heater,precooler 1,cooler,hotwater Type: VT 4 P (1.4401) Fabr.Nr.: 177/4113 flow rate: ca. 750 ltr/h (5 to 72/75°C) - 80 % gain of heat day of construction:1994 weight : ca. 220 kg Dimension : length x width x hight: ca. 103 x 44 x 143 cm

Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.

Heating with hot water and heat exchanger. Air filter and Verteilkänäle. Type I engine number 918005 0720.25.20

Centrimax provides used, but reconditioned centrifugal decanters (by Flottweg also as full coat screw centrifuge GEA Westfalia Separator as centrifugal decanter - or by Alfa Laval also de decanter centrifuge or decanter centrifuge known as) makes Flottweg, GEA Westfalia Separator, Alfa Laval, Sharples, Andritz etc. Thanks to a comprehensive overhaul and delivery with a mechanical warranty, you meet the highest standards of quality from supplied decanter (full coat screw centrifuge, Zentrifugaldekanter). The new SPS controls supplied with the decanter enable easy integration into the existing production process and lead to a new machine character. Centrimax provides almost all de decanter types available on the market:

GEA Ahlborn plate heaters used

FOR SALE .. WESTFALIA GEA BILGE MASTER 1500 COMPLATE SYSTEM YOB 2007 AT TURKEY ... HAVE A GDY SIR; WE VE COMPLETE SYSTEM WESTFALIA GEA BILGE MASTER 1500 AT STOCK. PLS FIND DETAILS OF SYSTEM. — BILGE MASTER 1500 YOB 2007 SER NO 9017-909 IMO CERTIFICATE 330 238 / MEPC 107 (49) — BILGE WATER CENTRIFUGE GEA WSD8 01 037 YOB 2007 S No 9039 654 —OIL MONITOR OMD 2005 —COMPLETE WESTFALIA CONTROL PANEL --GEA FILTER AF 300 YOB 2006 -- FEED PUMP IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

6-color R25476/17 ALLIED GEAR label flexo printing machine model: Flexomaster age: 1995 available: immediately 6 colour 6 anilox rolls paper cutter laminator transporter power unit UV dryer Video mounting plate (JM Heaford) Still in operation: Yes Available: nach Absprache

Voltage: 230/400 V Compressor FRASCOLD type D 315 power 15.36 m3 / h Evaporator GEA Küba type DZB 071 Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

Used decanter centrifuge HYSEP type MD43C with carbon steel bowl and screw. Internal surface of bowl and screw flinge are lined with wolfram-carbide. Bowl has a main drive 11/12.5 kW, 1455/1755 rpm , 50/60 hz. Screw is driven by hydraulic motor with power 5.5 kW. Working rotation speed of bowl 2800 rpm. Maximal sludge density 1.2 kg/m3, working temperature up to 80C. Machine is mounted on integrated frame and is equipped with feeding pump, polimer dosing device and control panel. Bowl cover, discharges and drive covers are designed in stainless steel. Technical documentation included.

Dimensions: L 1410 mm x W 900 mm x H 1310 mm.

Centrimax provides used and reconditioned separators for the beverage industry: Beer separators Dairy separators Separators for the juice industry Separators for coffee, tea, and soy

Westfalia decanter Manufacturer: GEA Westfalia Separator AG Type: CA 365-010 Year of construction: 2001 Drum speed: 3,300 RPM Starting up: 2004 Usage area: In the production of base oils for the removal of solid particles. Decanter was taken out of service after a production changeover in 2004. Therefore it is fully functional and in very good condition. There are control cabinets including all wiring diagrams, as well as complete documentation! Cabinets have a frequency converter to regulate the speed of the drum. In very good condition!

Centrimax - Winkelhorst separation technology GmbH supplies used, but reconditioned centrifugal separators of makes GEA Westfalia Separator and Alfa Laval for the centrifugal solid liquid separation. The separators are a comprehensive overhaul and then delivered with a mechanical warranty. Furthermore, the separators with new plc are equipped with whose help the separators can be integrated easily into the existing production process. All marketed separator types (E.g. automatic drum separators) belong to the program from Centrimax.

power is 620kW @ 1800 arpm

2.5:1

Air heater Manufacturer: GEA Happel Klimatechnik GmbH Type: MAXX M311D. BA3. X ATYPE Year of construction: 2004 Technical data: Rated voltage: 3 x 400 / 50 V/Hz Nominal power: 0.30/0.17/0.12 A Protection class: IP54