gea plant used for sale

Cable shredder Manufacturer GEM Type TS 1000 Year of construction 05/2016 • CE certificate: TS 1000 • Slip No: PCCE 1036 • Pressure: 100 bar • 75 kW motor power • Weight: 10,200 KG • Rotation Number: 88/min • Rotor length: 1,000 mm • Rotor width: 450 mm • Hydraulic slider 1,400 mm • Rotor knife 50x50x30mm hardened DIN 2379 • Engine manufacturer Gama • Radiator manufacturer Yilmaz 87 revolutions / minutes • Electronics manufacturer Siemens and ABB PLC control panel • Hydraulic pneumatic sieve changing mechanics

Packaging machine Paper machine, Upmatic 4000 PA for pack sizes from 1.5 kg to 10 kg Dimensions of the paper bags 600 x 300 x 180 mm to 600 x 300 x 180 mm Capacity for quantities of 5 kg: approx. 20 bags/min. 230 V / 400 V at 50 Hz Power consumption approx. 3 kW Air pressure 3 bar Air consumption approx. 390 l/min. Weight 700 kg Dimensions 2785 x 1890 x 2200 mm Controls Moeller PS4-341 Control panel MV4-150-TA1 Magazine capacity: 300 paper bags Documentation available Upmatic Computer Scale 2007 Computerized Partial Batch Weighing Machine Weighing range 1.0 to 25 kg Power capacity for quantities of 2.5 kg approx. 30 cycles/min. 230 V / 400 V at 50 Hz. 3 phases + neutral conductor Power consumption approx. 4 kW Air pressure 6 bar Air consumption approx. 2.6 litres/cycle Weight approx. 1100 kg Dimensions 2425 x 1777 x 2053 mm Control, control panel Moeller MI D ...

Haul-off for profiles, used and overhauled Manufacturer: Blake Type: 303-1600-180 Year of construction: 1995/2021 Serial.-No.: 637 Contact length, effective: 1600 mm Pad width: 180 mm Design: smooth pads at the bottom and top Haul-off force: approx. 20,000 N Hail-off speed: 0.1 -5.0 m/min. Drive Motor: DC Shunt Motor Motor power: 5.0 kW Dimensions: 240 x 90 x 175 cm Weight: approx. 950 kg Remark: The electrical control cabinet was renewed in 2021. The machine has been cleaned, repainted and checked for function. In addition, a new control panel as a remote control incl. 10 m long control cable.

USED TETRA PAK A3 FLEX 1000ML SLIM FILLIN LINE FOR SALE YEAR 2017 Item #: Usm-207 Category Tetra Pak A3 CF/Flex Used A3 Flex 400v 1000ml Slim Filling Line Year 2017 A3 Flex 1000ml Slim Filling Machine, Version 400v, Year of manufacturing 2017, Working ours 4650, Speed 7000 Packs Per Hour Helix Accumulator ACHX 30, Lenght 50meter, Year of manufacturing 2017 Cardboard Packer 32, TCBP 32, Working hours 5450, Year of manufacturing 2017 Tetra Pak Shrink Wrapper, Year of manufacturing 2017 Tetra Pak Cap Applicator, Cap Flex 30, Cap type Helicap 23, working hour 5071, Year of manufacturing 2017 Line Controller 30 plus, Year of manufacturing 2017 Conveyors and Paper trolly PROCESSING EQUIPMENTS: Pasteuriser 8000 LPh, Type C85, Year of manufacturing 2017 Homogeniser, Tetra Alex 30, Year of manufacturing 2017 High sheer mixer, capacity 8000 LPh, Year of manufactuirng 2017 Mi ...

123

Fettbaker Kippfix Roka Werk TW 36-E -with 10 tilting planks Pool dimensions: 50x88cm and 8.5cm high Dimensions: 218cm length 92cm height

Feeding device / bunker for logs, friezes etc. Filling of the bunkers with a forklift from the front Bunker capacity: approx. 5 m3 Logs, friezes or the like can be filled in bulk. The application is carried out via a hydraulically swivelling tilting device. Various conveyors are included in the scope of delivery. These are 2 identical lines that are also offered individually. 1 line was in use for about 1/2 year, the 2nd line is as good as new. See photos

We offer, in the current state, ex site Fruit juice concentrate plant Was used for apple and sour cherry Manufacturer: Unipektin Year of Make: 1990 Type: Case Film Intake: 23,000 kg/h Water evaporation: 10,000 kg/h Only pre-evaporator with aroma column Machines are dismantled Subject to prior sale

SARCMI BLUESTAR 2000 Complete PET filling line: Blow Molding Machine - SBO-14 ROUE - 18.200 bph Air Compressor - CE68BSG40 - 38,9 m3/m Air Conveyor Monoblock Filler BLUESTAR 2000 - 1R 54 72/9H - 0,5 l. -20000 bph, 1,5 l. -15000 bph Cap Elevator Labeling Machine ROLLQUATRO F30 - 24000 labels/hour Fill Level Control Device - STRATEC Shrink Wrapping Machine - АРЕТ 143/DF - 20000 labels/hour Bottle and Packaging Conveyor Pallet Stacker - PALKOMBI Series IBP429 - 30 pallets/hour Pallet Wrapper - ROTOPLAT 2000 - 30 pallets/hour All machinery in good condition, complete working line.

Key data: 180 mm

First-class renovated extrusion recycling plant made by EREMA Intarema 2018 TVEplus for the processing of post-consumer polyethylene and polypropylene, capacity up to 2,400 kg/h, built in 2019 for sale. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Can filling line, capacity 10,000 - 16,000 cans/hour, 330 + 500 ml, 0.33 + 0.50 standard can 202, depalletizer, filler & seamer 28-4, tunnel pasteurizer, can transport. 22,000 operating hours. Beverage Canning line, capacity 10,000 - 16,000 cph, 330 + 500 ml, 0.33 + 0.50 Standard can, can end 202, depalletiser, Filler & Seamer 28-4, Tunnel pasteuriser pasteurizer, can conveyors, 22,000 operating hours.

USED TETRA PAK A1 TFA 500ML FINO FILLING MACHINE FOR SALE YEAR 2018 Item #: Usm-200 Category Tetra Pak A1 A1-1000 TFA 500ml Filling Machines, Year: 2018, Working Hours only 3422, Speed 9800 Packs Per Hour, Step 1000. The filling machine still on production.

USED TETRA PAK TBA 19 200ML SLIM 20V COMPLETE FILLING LINE FOR SALE YEAR 2006 Item #: Usm-202 Category Tetra Pak TBA 19 TBA 19 200ML SLIM COMPLETE FILLING LINE Filling machine TBA/19 TBA 200 Slim, Version 20V, Year 2006, Working hours 29000 Straw Applicator Tetra Straw Applicator 21 Cardboard packer TCBP 70 Automatic palletisation unit Conveyors & Paper trolly

USED TETRA PAK TPA 19 200ML PRISMA COMPLETE FILLING LINE FOR SALE YEAR 2002 Item #: Usm-203 Category Tetra Pak TBA 19 USED TETRA PAK TPA 19 200ML PRISMA FILLING LINE FOR SALE TPA 19 200ml Prisma Square, Version 10V, Working hours 23000 Straw Applicator Tetra Straw Applicator 21 Cardboardpacker TCBP 70 Automatic palletisation unit Conveyors & Paper Trolly Condition: Still on production.

USED TETRA PAK TBA 8 1000 ML SLIM FILLING LINE FOR SALE Item #: Usm-204 Category Tetra Pak TBA 8 TBA 8 1000ml Slim Filling Machine, version 120v Cap Applicator 30 Flex, for helicap 23 Packer 70 conveyors and paper trolly

USED TETRA PAK A3 COMPACT FLEX 250ML BASE FILLING LINE FOR SALE Item #: Usm-205 Category Tetra Pak A3 CF/Flex A3 Compact Flex 250ml Base Filling Machine, version 200v, working hours 2300, Year 2011 Straw applicator TSA 30, Year 2011 Conveyors and Paper trolly The current pack size on machine is 250ml Base and it can be change to 200ML and 330ml both kits available with machine. The spare parts lot also available. Condition: Tetra Pak maintained and still on production

USED TETRA PAK TBA 19 200ML SLIM 20v FILLING LINE FOR SALE Item #: Usm-209 Category Tetra Pak TBA 19 1-Used Tetra Pak TBA 19 200ML Slim 20v Filling Machine, Year of manufacturing 2004, speed 7500 packs per hour 2-Straw applicator tsa 21, 3-Conveyors and Paper trolly

USED EVERGREEN GABLE TOP FILLING AND CAPPING MACHINE YEAR 2007 Item #: Usm-210 Category Gable Top Machines Evergreen GTL-30 Gable top Filling Machine, Year 2007, Speed 2400 Packs per hour, cold filling for fresh products

USED TETRA PAK TBA 19 125ML SLIM FILLING LINE FOR SALE YEAR 1998 Item #: Usm-212 Category Tetra Pak TBA 19 TBA 19 125ml Slim Filling Machine, Version 10v, Year of manufacturing 1998 Straw applicator TSA 21 Tetra Film Wrapper 67 Tetra Packer TCBP 70 Conveyord and Paper Trolly Tetra Pak juice pasteuriser and tetra alex 25 homogeniser also available for sale. Condition: Complete and Running Condition.

USED TETRA PAK TPA 19 330ML PRISMA FILLING LINE FOR SALE YEAR 1998 Item #: Usm-214 Category Tetra Pak TBA 19 TPA 19 330ml Prisma Filling Machine, Version 10v, Working Hour 20500, Year 1998 Tetra Cardboard Packer 70, Year 1998 Easy ride Conveyors and Paper trolly Condition: Good

The painting line is designed for varnishing elements made of MDF or HDF board. Spray booths have two circuits: one for clear coat and the other for color paint. The line is designed for water-based UV varnishes. The line consists of the following elements: - feeding table with an automatic robot from the Italian company NEOMEC - transport table with a cleaner - shower cabin from the Italian company GIARDINI DUALTECH 416 r.2017 - drying tunnel with IR lamps pcs.2 pcs - UV tunnel - roller conveyor - turntable - transport table - transport table with a cleaner - automatic painting machine - drying tunnel with IR lamps pcs.2 pcs - UV tunnel - roller conveyor - receiving table with a robot from the Italian company NEOMEC

Fully Equipped Bottling System A complete bottling system, ideal for beverage production! Perfect for both small and large-scale operations. System Components: Heated water tanks: 6 units of approximately 3000 liters each 1 unit of 6000 liters 1 unit of 10,000 liters Production lines: 2 complete bottling production lines Small bottling systems: 4-5 units for smaller productions Vacuum machines: Various machines for efficient packaging Blue Water system: Large system with separate oil burner Additional equipment: Approximately 70 components, including machines, spare parts, and accessories Advantages: Ideal for starting or expanding your beverage production Complete system, ready for use High production potential Has been active until 2023

Find more here - /

Demonstration system EVT AQUA - L for sale. Year of construction 2020 Equipped with the following options  Goods movement  Spraying device  Surface drainage  2 x heated flood unit  2 x ultrasonic rod transducers 1.5 kW / 25 kHz each  Return sieve  2 x fine filter 25 μm  Hot air drying  Vapour extraction via filter muck  Automatic oil separation Technical data Cleaning medium: Water with cleaning additive Filling volume: 800 dm3 Heating capacity: 30 kW Connected load: 60 kW Compressed air: 6 bar Weight of the system: 3000 kg Throughput: 4 - 6 batches/h 250 kg/h Basket dimensions: 670 x 480 x 320 mm Plant dimensions: 2400 x 2000 x 2450 mm Operating mode: 1-3 shifts Possible Applications: - Water Treatment: - Industrial Water Purification: Designed for treating and recycling water in manufacturing or processing plants. - Wastewater Ma ...

2007 Mercedes Combined heat and power plant (CHP) The CHP plant was originally intended for an oil platform. Therefore, it is protected against salt water and can also be operated in island mode. Technical data (See pictures) CHP plant with Mercedes engine, which is designed for multi-quality fuel (diesel, heating oil, pyrolysis oil or vegetable oil). Thus preheating unit and corresponding exhaust gas purification. BJ. 2007. Operating hours: 0 (test run only); The unit was never connected to the network. If palm or vegetable oil is used, preheating” is required to get above the pour point. All pumps were completely overhauled by the manufacturer when we purchased them (see Rg with maintenance report). If you want to drive in island mode, this must be changed on the control + the controller on the generator must be replaced. In addition to electricity, the unit can also recover  ...

1994 Niemeyer RWE 13 – SF 7/002 D Shaft manufacturing plant Find more here - / Contact us at -

Good day We offer you a used OCC sorting system consisting of a paper spike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper take-off belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, manufacturer Lubo Screening & Recycling Systems B.V. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes of the PaperSpike as well as pneumatic cylinders were replaced. All bearings and drive chains were replaced, and the engines and transmissions were checked. A viewing is possible by appointment. We assume no liability for the technical information or any errors. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH

Eberhardt Universal Round and long mould Year of construction 2003 Siemens Simatic control system Height: 150cm Width: 80cm Depth: 100cm

Double Diaphragm Piston Pump

M-Tec Batch Mixer 1.5 m³. A dedusting system is included on request.

Bread longiting machine Kemper SU-L - for long rolling bread doughs - With pressure plate - Mobile on castors

Still Water PET Bottling Line – 16,000 BPH (2018) Complete still water bottling line designed for high-efficiency production of small-format PET bottles with thermoseal lids. The line is suitable for filling 100 ml, 150 ml, and 200 ml PET bottles and includes blow molding, filling, sealing, labeling, packing, palletizing, and wrapping equipment. General Information - Application: Still / non-carbonated water - Bottle Material: PET bottles with thermoseal lid - Output Capacity: 16,000 bottles per hour - Bottle Sizes: 100 ml, 150 ml, 200 ml - Year of Manufacturing: 2018 Production Configuration - Combi Machines: 2 units (Blow Moulder + Filler + Sealer) - Machine Speed: 8,000 BPH each - Preform Type: Flat Neck – 6.39 g - Sealing System: Thermoseal neck Filling and Sealing Stations - Filling Station: Two-step system with two stations - Each station equipped with 8  ...

Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...

Steam Boiler Plant 120 MW / 30 bar Saturated Steam This steam boiler plant is in good condition and designed to produce 54 kg/sec of saturated steam at 30 bar for industrial processes. The boiler features a membrane wall construction and is supported from the bottom. It is equipped with four burners located at the top of the boiler: two fired by natural gas and two by light fuel oil, each with a capacity of 30 MW. The firebox base and lower manifold are protected by refractory tiles. The flue gas side of the boiler operates under positive pressure. The plant includes two 100% capacity combustion air fans; there is no exhaust gas fan. The equipment has been meticulously maintained and upgraded throughout its operational life, meeting the most stringent modern quality standards. The steam boiler operates on natural water circulation, with heating surfaces arranged across two draughts ...

Key data: 3 KW, 11000 V

Diesel Power Plant MAN 57.9 MW / 50 Hz – year 2014 This diesel power plant consists of three identical 19.3 MW MAN 18V48/60 TS diesel generating units with auxiliaries. The engines are 500 rpm turbo charged with intercooling and they are installed on base frame forming a wet oil sump for engines. Diesel generators have been operated only approx. 5000 hours since new. Alternators are ABB made synchronous generators which are air-cooled, and they have their own lubrication oil system installed on concrete foundation and connected to the engines with flexible couplings. Engines are cooled with two separate cooling circuits connected to radiator cooling system. The control system is MAN SaCoS One. 11 kV breakers are Siemens SF6 type. The plant is still installed and fully operational and in good technical condition. Main technical data Manufacturer MAN Augsburg, Germany Manufa ...

Venjakob Perfect paint shop: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1,300mm - Max. part length 6,500mm - In U-shape with angle transfer Composed of: 1. Covering tape, length 3,050mm 2. Free space for a grinding machine (option) 3. Automatic sprayer VEN SPRAY PERFECT, length 5,510mm 4. Evaporation dryer OIR, length 6,000mm 5. VEN DRY AIR JET nozzle dryer, length 4,160mm 6. 180 degree angle transfer, with nozzle dryer 7. Supply air system for angle transfer, 25,000m³/h 8. VEN DRY AIR JET nozzle dryer, length 5,160mm 4 Pieces IR Illuminators 9. VEN DRY AIR JET nozzle dryer, length 5,160mm 4 Pieces IR Illuminators 10. VEN DRY AIR JET nozzle dryer, length 5,160mm 4 Pieces IR Illuminators 11. 3D-UV Dryer, VEN DRY UV, GA + HG 12. Removal area, tape of UV dryer 13. Supply air system hall, 30,000m³/h Further information: On  ...

Plant for filling and packaging aluminium tubes, consisting of: Tube filling and sealing machine IWK TFS 10: For aluminium tubes (double-fold, triple-fold) 10 tube holder stations Output 25 - 60 tubes/min For tube diam. 11-52 mm depending on tube holder format set Tube sheath length 50-250 mm Total tube length with cap max. 280 mm Dosing 2.0-400 ml depending on dosing pump 2 rotary valve dosing pumps, 2-30 ml + 50-150 ml 2 cam discs 2 filling nozzles, diam. 12 + 19 mm with anti-drip device Tube dispensing magazine Tube centring station Print mark control (alignment of the tube to the print image) Under-level filling 1-line embossing, with embossing numbers 1 filling funnel, heatable with electric heating, 1 single-walled filling funnel 2 tube holder format sets for aluminium tubes (diam. x total length) 16.0 x 100 mm + 25.0 x 163 mm Contactor contro ...

Hand Pastry Filler XL with 7 litre hopper Table attachment Filling quantity from 10 to 70g Adjustable Used device as good as new More pastry fillers in stock!

Triblock (rinser-filler-capper), pressure filler, isobaric, with vacuum pump pre-evacuation, manufacturer: Eurostar Italy, type Uniblock MEC ISO DPS 12-12-1C, 12 rinser nozzles, 12 filling valves, 1 head crown cap, year of construction: 2005, with height adjustment, set up to currently 330 ml with 26 mm crown corks. 2,500 bottles / hour Tribloc (Rinser-Filler-Crowner), counter pressure, isobaric, with vacuum pump, pre-evacuation, Made by: Eurostar Italy, Type: Uniblock MEC ISO DPS 12-12-1C, 12 head rinser nozzles , 12 filling valves, 1 head crown corker, Year: 2005, with hight adjustment, adjusted to bottle 330ml 0,33 l, 33cl mm with 26 mm crown cork. 2,500 BPH

ID3532 FC Maschinenbau-Schlüsselbauer-Schindler year/Baujahr 1995/2010 Fully automatic stone finishing system (edge aging, bush hammering, impregnation) Fully automatic stone finishing system for the artificial processing of concrete block surfaces and edges, as well as for impregnation. The special feature of this system is that, unlike conventional processes, only the edges can be aged. Furthermore, the system also allows bush hammering of the stone surface. Fully automatic brick finishing system (stone edge aging, stick planting, impregnation) Fully automatic stone cutting system for the artificial processing of concrete block surfaces and edges as well as impregnation. The special feature of the system is that, in contrast to conventional processes, only the edges can be aged.  In addition, the system also allows the stone surface to be hammered. More details and price ...

A wire drawing plant is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 6300, year of manufacture: 1992, number of pulls per block: 1, drawing drum diameter: 700mm, pulling force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Sp ...

A wire drawing unit is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 5000, year of manufacture: 1993, number of draws per block: 1, drawing drum diameter: 700mm, drawing force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Spo ...

An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available.

A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 125mm, L/D ratio: 42, extrusion capacity: 650kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/512kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. The system has extensively documented defects.

A TBS Pack film shrinking machine is available. 1) TBS Pack semi-automatic angle welding machine, year of manufacture: 2016, film type: POF/PP/PE/PVC, max. film thickness: 50my, max. workpiece dimensions X/Y/Z: 480mm/680mm/200mm, max. roll length/diameter: 600mm/250mm, max. connected load: 1.8kW, welding capacity: 15/min, welding frame dimensions X/Y: 500mm/700mm, weight: approx. 230kg. Documentation available. 2) TBS Pack shrink tunnel ST-5530, year of construction: 2016, tunnel dimensions X/Y/Z: 550mm/1200mm/300mm, max. conveying speed: 30m/min, max. connected load: 9.5kW, weight: approx. 440kg. Documentation available.

A film shrinking system consisting of 5 components is available. 1) 2-part roller conveyor, dimensions X/Y: approx. 4200mm/550mm. 2) Film loading device with cantilever arm for film change, dimensions X/Y: approx. 3600mm/2400mm. 3) Sealing tunnel, dimensions X/Y: approx. 5600mm/1650mm. 4) Packaging turning station, dimensions X/Y: approx. 5450mm/3100mm. 5) Carton stacking machine, dimensions X/Y: approx. 3400mm/3900mm. Total system dimensions X/Y/Z: approx. 22250mm/3900mm/2950mm, packaging capacity: approx. 600-1000/8 hours. Including 47x films, film width: 600mm, film thickness: 55my. On-site inspection is possible.

A complete bottle filling, sterilizing, capping, labelling, cartoning and palletizing line for the wine industry is available. Bottle filling capacity: 4000 bottles/h, bottle format sets: 1l and 0.75l Schlegel/Bordeaux/Bugunder/0.5l/0.25l, sterilizer capacity: 4000 bottles/h, capper capacity: 8000 bottles/h, labelling capacity: 10000 bottles/h, capping capacity: 10000 bottles/h, carton formats: 12 and 6-bottle crates/12 and 6-bottle cartons, palletizing capacity: 1000 cartons/h. Line components: 1) Normpack Compact Form CF 670/980 carton folding machine, year of manufacture: 2000, output: approx. 650 cartons/h, 2) Stork VV-24 L.W. bottle filling machine, Year of manufacture: 1977, 3) Silmo ST XII/110 v ozone immersion bath sterilizer, year of manufacture: 1983, bottle formats: all standard wine bottles, 4) Miho LC 2000 caustic tester, year of manufacture: 2003, 5) Kapsler Robino & Galand ...

A concentrate system for thickening and concentrating liquids, typically in the production of juices, concentrates or other liquids in the food industry, is available. Evaporator: horizontal, evaporator stages: 4, operating mode: live steam, heat exchange: preheating/recovery/cooling, condensation: semi-barometric milk condensation, flavor extraction: rectification/floor column. Water evaporation: 4840kg/h, inlet quantity: 6600kg/h, inlet dry matter: 12%, outlet quantity: 1760kg/h, final dry matter: 45%, aroma recovery at 150-fold concentration: 42l/h, steam consumption: 1685kg/h, specific steam consumption: 348g/kg, fresh water consumption: approx. 12700l/h. Documentation available. On-site inspection is possible.

A combined heat and power unit (CHP), consisting of three diesel generators installed in containers, is available. 1) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Krauter, type: D-SYN-GEN, kVA: 400, kW: 360, A: 577, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 2) Engine: MAN 12-cylinder turbo, type: D 2842 LE 20, generator: Leroy-Somer, type: LSA K 475 L10, kVA: 375, kW: 300, A: 400, Hz: 50, speed: 1500 rpm. Including DELF synchronization, heating water outlet, table cooler, preheating and oil change device. 3) Engine: Daimler Benz 8-cylinder turbo, type: AGV 12, generator: Krauter, type: D-SYN-GEN, kVA: 350, kW: 230, A: 400, Hz: 50, speed: 1500 rpm. The combined heat and power unit has a total output of around 1100kVA. Including table cooler, V2A heat exchanger, containers and switch cabin ...

Motor power: 0.48 kW/1.9 kW, motor speed: 750 rpm/1500 rpm.