ge mi fu used for sale

Manufacturer: MINOX Type: MTS 2000/1 Built in 1999 Surface: 2.5 m² Dimensions diameter: 180 cm Weight: 1200kg Space requirement: 240 cm x 240 cm Available quantity: 2 pcs. Condition: used, fully functional

Manufacturer: Chiron Model: MILL 6000 high speed with NC swivel head Year of Manufacture: 2004 Major overhaul: 2013 Operating hours: 77,374 h Weight: 19,500 kg Power Supply: 3/N/PE ~ 50/60 Hz Working Voltage: 400 V Control Voltage: 220/24 V Power Consumption: 52 kVA Rated Current: 75 A Fuse: 80 A Last spindle replacement: March 2021 (approx. 7,300 spindle hours since) Technical Data: - Control: Siemens 840D (PCU50, NCU572.4) - NC swivel head - Travel paths: X 6,000 mm / Y 630 mm - Rapid feed: X / Y / Z = 60 m/min - Motor spindle: 12,000 rpm, 140 Nm - Tool change time (chip-to-chip): 3.0 sec (vertical), 4.7 sec (horizontal) - Tool magazine: 92 tool positions, HSK-A63 Find more here - / Contact us at -

Coordinate measuring machine Inv. Num. : 8632 Type: MICRO-MS 343 Producer: Tesa Created: 1997, GO 2020 Parameters: Machine dimensions: 800x750x1370 mm New Reflex system

Number of spindles: 5 St. Working width: 240 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min. Weight: ca. 3500 kg control: SCM Control 10 SCM Superset NT with workpiece return ---------------------------------- The machine is in cleaning and completely checking process at the moment. Brief Summary: ---------------------------------- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ---------------------------------- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ---------------------------------- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ---------------------------------- First left vertical spindle Motor with bra ...

Assortment of measuring tools, calipers Digital depth caliper Mitutoyo 571-203-10, measuring range 300mm Digital gate valve Garant 412601/150 (manufacturer probably Mitutoyo), measuring range 150mm Digital caliper unknown, measuring range 150mm Analogue caliper Expert, measuring range 300mm The batteries have been renewed or are in order. The measuring tools can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Two digital calipers Digital caliper Mitutoyo 551-231-10, measuring range 300mm Digital caliper Mitutoyo 500-181-U, measuring range 150mm The batteries have been renewed or are in order. The measuring tools can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

turning length: 600 mm turning diameter over bed: 360 mm turning diameter over slide rest: 190 mm bed width: 295 mm number of spindle speeds: 45 - 2240 U/min. spindle bore: 33,0 mm tailstock quill taper MT: MK 3 feed: Längs 0,02-0,8 mm/U feed: Quer 0,0125-0,5 mm/U total power requirement: 5,5 kW weight of the machine ca.: 1900 kg range L-W-H: 2050 x 950 x 1280 mm Refurbished and repainted in 2013 Costs around 16.000 euros Furnishing: - WNW NILES 3-jaw chuck Ø 200 mm - Multifix steel holder size B with inserts - revolving center points - chuck key - Movable tailstock - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 4.0 mm : 3.0 mm : 30 - 120 Grad blade length: 150 x 150 mm work height max.: 900 mm table:: 1000 x 650 mm engine output: 3.0 kW weight: 850 kg range L-W-H: 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, ...

CNC vertical machining center Type: Mikron VCE 800 Pro Manufacturer: GF AgieCharmilles Year: 2011 Control: Heidenhain iTNC 530 X: 800 mm Y: 500 mm Z: 540 mm Table: 910 x 500 mm Max table load: 1100 kg Max spindle speed: 14000 rpm Tool magazine: 24 positions Machine weight: 5000 kg Cooling and rinsing through the center of the spindle. Work and tool probe included New spindle in 2018 Machine in good condition, under power Find more here - / Contact us at -

Table sheeter Fritsch Mini 520 0.5Lx0.5L Year of manufacture: 2013 Machine technically checked-cleaned with dry ice. Belts have signs of wear. Machine tested

Properties: Length 1000 mm Width 650 mm Total height 1000 mm Operating temperature range 80° C Working overpressure range 5 bar Volume 2000 L Material V2A (AISI 304) 1.4301 Fabr No. 30178 Ab. Operating overpressure 5 bar Ab. Operating temperature 80°C

Punching force 45 t. 2 pcs. available from stock (Video under power on request)

Built in 1999 electric scissor pallet truck Load capacity 1,000 kg Lifting height approx. 80 cm Delivery date: immediately Price on request. We supply and install worldwide.

Manufacturer: MiSeq Model: Illumina Year of Manufacture: 2015 the device has performed 472 runs so far. Electrical Information - Line Voltage: 100V–240V - Frequency: 50/60Hz - Power Consumption: 400W Find more here - / Contact us at -

Air conditioner – "The ideal solution for climate control in proofers and prepared rooms." Features: - Energy-saving - Easy installation and operation - Device dimensions W x D x H: 425 mm x 205 mm x 1650 mm - Temperature and humidity adjustable - For fermentation rooms up to 12 m³ - Plug-in free-standing device Connection 400V, 16A-CEE plug New device with warranty + spare parts service

Deck Oven Miwe Condo C-3-1208 Miwe Condo Model: Type: CO.3.1208 Bottom heat and top heat can be controlled individually Chassis mobile with brake Connection 400V, 3 x 16A-CEE plugs Water connection 3/4 inch, water drain DN 40 Dimensions: 1500 x 1300 x 1950 mm, WxDxH Used oven

WITH TRIMMER p/n: 2654000N SN: 060900759 Format: up to SRA

Used manual batch ultrafiltration line for cottage cheese made by Agros Milko-Polska. Capacity: 2.500 kg of finished product in 8 hours, concentrated to 72% dry matter. New: 1996

MITUTOYO Crysta Apex CRT-A910 coordinate measuring machine was built in Japan by Mitutoyo Corporation. This extremely advanced machine, characterised by the highest accuracy and objectivity, is used for highly accurate workpiece measurements. Workpiece measurements are performed using the contact or non-contact method, which are then represented as a set of coordinate points. The use of this method makes it possible to measure parts with very complex shapes, which cannot be measured with ordinary measuring instruments. The MITUTOYO Crysta Apex CMM measuring machine is offered with a PC with software. Technical specifications of the MITUTOYO Crysta Apex CRT-A910 measuring machine - measuring range in the X/Y/Z axis: 900/1000/800 mm - measuring resolution: 0.1 µm - measuring speed: 300 mm/s - PC with software - compressed air pressure: 0.4 MPa - compressed air consumption: 50 l/m ...

x-axis: 1350 mm y-axis: 1150 mm z-axis: 895 mm control: HEIDENHAIN iTNC 530 turning speeds: 15000 U/min tool taper: HSK-A63 surface area: 1100 x 1000 mm max. table load: 1600 kg numbers of tools in magazin: 92 spindle drive: 30 / 38 kW A-Axis: -16 / +120 ° total power requirement: 58 kW weight of the machine ca.: 12,6 t dimensions of the machine ca.: 5100 x 2300 x 3090 m 2023 new Spindle machine equipped with: - CNC Control Heidenhain TNC 530 - swivel head, direct drive ‘High Torque’ motor - Autom. Tool change: 46-position tool magazine - High pressure cooling through spindle – Chip evacuator – Tool control with duallaser – Radio frequency probe – Airthrough spindle – APS(Advanced Process System) & ITC(Intelligent Thermal Control) - Renishaw probe Machine on: 6680h, active drives: 4876h, spindle: 2657h The data for this ad was created with ModulMWS - the software solutio ...

Tube filling and sealing machine with hot air unit for filling and sealing PE and laminate tubes, Output depending on tube size, filling volume and viscosity of the filling product approx. 15-20 cycles / min. incl. cooling unit

x-travel: 1000 mm y-travel: 600 mm z-travel: 600 mm control: Heidenhain TNC 426 spindle nose: 100-700 mm work table:: 1.080 x 580 mm workpiece weight max.: 550 kg T-slots: 7 Stk. T-slot - width: 14 mm tool piece magazine with: 36 Plätzen weight of tools max.: 8 kg tool length - max.: 340 mm total power requirement: kW weight of the machine ca.: 6,2 t dimensions of the machine ca.: 4.790 x 5.330 x 2.905 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bacciottini Pit Stop Mini Creasing Machine; cleaned and tested; Max. sheet format 350x300mm, min.100x150mm; Paper weight 80-400g; 3 tools (2xgrooving tool, 1xperforation); Program memory. Creasing machine Bacciottini Pit Stop Mini; cleaned and checked; max.paper size 350x300mm, min.100x150mm; paper weight 80-400g; three tools(2 creasing, one perforating); Program Memory.

Manufacturer: Mikron Model: VCP 1000 (ITNC 530 Control) Year of Manufacture: 2004 Weight: 10,500 kg Power Supply: 400 V / 50 Hz / 3 Phases Current: 100 A Power Consumption: 40 kW Control Circuit Voltage: 24 VDC Sound Level: 68 dB(A) Find more here - / Contact us at -

Manufacturer: Mikron Model: VCP 1350 Year of Manufacture: 1999 Weight: 10,100 kg Power Supply: 3 Phase, 400 V, 50 Hz Current: 125 A Power Consumption: 46 kW Control Circuit Voltage: 24 VDC Sound Level: 75 dB(A) Certification: CE Find more here - / Contact us at -

Holzzerkleinerer ( Holzhäckler ) maschine modell MION MOSOLE TR 2 gebrauchte maschine Maschinenbedienung im Automatik- und/oder Handbetrieb modus Arbeitsbedingungen: ausgezeichnet Im Automatikbetrieb startet der Motor in die entgegengesetzte Richtung, um den Stopfer von eventuellen Rückständen vorheriger Arbeiten zu befreien. Im Vollautomatikbetrieb stoppt der Motor nach ca. 5 Sekunden und startet erneut in die richtige Richtung für eine kontinuierliche Bearbeitung (siehe Video). Technische Daten : hydraulischer Schieber Breite Rotor mm.700 Durchmesser Rotor mm.300 Drehzahl Zerkleinerungseinheit 100 U/min Trichterinhalt 3.42 m³ Hauptmotor PS 25 Hydraulikaggregat Motorschieber PS 1 auswechselbare Messer Beschickung von oben

Mitutoyo 570-313 Digital Height ruler

Mitutoyo HDS-G24 Digimatic Height Gauge HDS

Freesrobot Staubli RX170HM Deze robot is voorzien van gaten om te frezen in mallen van banden, maar ook in andere zaken is dit mogelijk. Koeling door de spindel en de koelmelk is luchtgekoeld. Smering Gebeurde met vet. spindelopname: HSK E 32 Werd gebruikt in Tire Mold fabriek Mecamold Herstal. Max weight on the table: 300 kg Admission in spindle (ISO): HSK E 32 Power on the spindle: 8 kW Drilling-capacity: 80 mm Tapping-capacity: 80 mm Control : Fanuc Number of axes: 6 Toolchanger: nee Number of toolholders: nee Number of rotations: 500 - 20 000 rpm Power principal motor : 5 kW

A bar loading magazine FMB for long turning automatics is offered. Bar diameter (min./max.): 2mm-23mm, max. bar length: 4200mm, max. remnant length: 420mm, loading compartment length/magazine length: 235mm, compressed air connection: 0.6MPa (6bar). An on-site inspection is possible by appointment.

x-travel: 600 mm y-travel: 600 mm z-travel: 250 mm table-size: 697 x 758 mm weight of the machine ca.: 1.5 t dimensions of the machine ca.: 2 x 1.5 x 1.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MICROCUT CHALLENGER BNC-2640X, year 2006 -Fagor 8055 -Maximum turning length 1500 -Spindle bore 105 -Turning diameter in the offset 790 -Turning diameter over bed 550 -Turning diameter via face slide 310 -Rod passage 69 mm -X-Path 300, Z-Path 1650 -8 tool positions

Mobile proofer 4060 NEW Simple proofer/warming oven Model: Gärmobil 4060 longitudinal Thermal double glass door with soft closed LED easy control with timer Temperature adjustable from 30 to 90°C Humidity adjustable from 60 to 95% Capacity: 20 trays 400x600 mm longitudinal Connection 230 V New device & SAB tested with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience!

Thermo Fisher refrigerated microcentrifuge, Tubes : 24 , Elec: 230 V / 50 Hz, timer: 1 to 99 minutes , Max speed: 13 000, Temperature range: -9 to +40°C , Refrigerant: R-134a

Thermo Fisher refrigerated microcentrifuge, Tubes: 24, Elec: 230 V/50 Hz, timer: 1 to 99 minutes, Max speed: 13 000, Temperature range: -9 to +40°C

MITSUBISHI ML3015eX PLUS laser cutting machine was built in 2019 in Japan by MITSUBISHI ELECTRIC CORPORATION. The machine, distinguished by the use of the most advanced technology available on the market, is an excellent choice for precision cutting of sheet metal made of, among others, steel, aluminium and copper. Workpieces with a maximum length of 3050 mm and a width of 1565 mm are machined by means of a reliable head with auto focus, which is powered by a 4.5 kW laser beam. The laser beam is generated by electrical discharges in a special gas mixture with a relatively slow flow and in a direction perpendicular to its axis. Real-time power monitoring, combined with a constant beam length, ensures the highest cutting quality over the entire work area and prevents power deviations of more than ± 1%, which are necessary for machining highly reflective materials. The entire machining  ...

minimax si x 32A3 UPx Sliding table saw Trimming length 1200mm Sliding carriage 3200 x 360 mm Format cuts 3200 mm Cutting width with rip fence 1270 mm Max. cutting height +90°: 136 mm Max. cutting height +46°/-46°: 97/60 mm Motor 400V 50Hz 7kW Speed main saw blade: 4000 rpm Suction Nozzle Diameter: 120mm & 80mm Weight: 936kg G&STÜ-5508783

Travel X/Y/Z: 670mm/430mm/460mm, table dimensions X/Y: 900mm/410mm, max. workpiece weight: 350kg, tool holder: SK40, spindle speed: 8000rpm, spindle inner diameter: 60mm, max. spindle-to-column distance: 460mm, rapid traverse: 24m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 2200mm/2050mm/2500mm, weight: approx. 3700kg, control: Heidenhain TNC 620, operating hours: approx. 21550h, spindle hours: approx. 3500h. Documentation available. An on-site inspection is possible.

Travel X/Y/Z: 2000mm/610mm/630mm, tool holder: SK40, spindle speed: 9000rpm, tool stations: 40, rapid traverse: 60m/min, table dimensions X/Y: 2100mm/720mm, max. table load: 1000kg. Control: Siemens Sinumerik 840D, operating hours: 18272h. Including conveyor and coolant system. Documentation available. An on-site inspection is possible.

A cycle-controlled CNC lathe Microcut of the BNC series is available. Turning length: 2000mm, chuck diameter: 400mm, turning diameter over bed/cross slide: 610mm/330mm, spindle speed: 2500rpm, tool positions: 8. Machine dimensions X/Y/Z: approx. 4000mm/2300mm/1800mm, weight: approx. 4500kg. Documentation available. An on-site inspection is possible.

1.7 t net weight, with dozer blade

Key data: 2000 mm, 500 mm, 550 mm

Specifications: Manufacturer: Chiron Type: Mill 2000 high speed Control: Heidenhain TNC 530 Year of Make: 2013 Travels: X 2,000, Y 500, Z 550 mm Working spindle Speed: 12,000 rpm Start table Dimensions L/W: 2,600 x 550 mm Table load: 1,000 kg Tool/movement Tool holder: SK40 Tool changer: 40-fold Measuring system: direct X/Y/Z Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Conveyor Preparation FK7 Loading automatically "opening and closing" Tub flushing

Takeuchi TB108 - mini excavator, - Year of construction: 2009, - Dead weight: 860 kg, - Engine power: 7,1 kW

2.0 t capacity, 80x40x1200 mm tines, with Bobcat T30.60 & T35.105 telescopic handler mount

with complete hold-down device, especially for garbage disposal, with screw-on reversible knife

Dimensions LxWxH: 40x45x39 cm

60 cm working width, with teeth, with Martin M10 mount

NEW, working width 200 cm, with Terex TL80 / TL100 mount