ge mi fu used for sale

surface area: 805 405 (x 340 ) mm no. of flutes: 8 groove width: 12 / x 45 mm total power requirement: 0 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Mikron, tool changer from CNC machining center Mikron UME 600 -for: max. 22 shots -Intake: SK40 -Dimensions: 1200/1150/H860 mm -Transport weight: 294 kg

Safety switch, safety switch, protective grid switch -Manufacturer: Euchner, Safety switch from CNC milling machine Mikron UME 600 -Type: TZ2LEO24M ID No.: 090559 Technical data: see photo of the nameplate Quantity: 1 piece available -Dimensions: 170/110/40 mm -Weight: 1.1 kg

used All-Purpose Oven Stone Slabs Oven Electric by Miwe Model Condo CO 4.1208 from 2018 tested and cleaned in stock immediately available for sale. The stove is with 4 floors each 120x80cm with exhaust hood including fan. - 4 shelves each 120x80cm - Each floor can be controlled separately - Top and bottom heat can be controlled separately - With exhaust hood - Floor entrance height 3 pieces 17cm and one shelf 20cm - Connected load: 28.7 kW - Year of construction 2018 Dimensions Width: 150cm Depth without hood: 133cm, with hood 173cm Height without hood: 194cm, with hood 213cm

Key data: 400 l/min, 6

Central plant with 2 pieces of automatic centrifuges, operation until February 2019 with oil. The Cleaning system for oil incl. tank 20 m3, is equipped with two automatic centrifuges of 150 m3 each. 200 liters/min. The total capacity of the plant is 300 to 400 liters per minute. Oil or emulsion, with emulsion more than 400 liters possible. Two centrifuges T42 , Clean tank 20 m3 oil (divided into two separate tanks with overflow) incl. pump for Supply of production with pure oil. In addition, the system has a lot of accessories: all spare parts + an old one centrifuge from 1987 as spare parts dispenser, a lifting tipping device for the Sludge emptying of the 200 kg buckets. The sludge ejection runs with this centrifuge automatically into the bucket under the centrifuge. The scope of delivery also includes a additional electrical cabinet for a second system with the sam ...

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 I/R module INT. 16/21KW CNC milling machine Mikron UME 600 -Type: 6SN1145-1BA00-0BA0 -Dimensions: 290/100/H480 mm -Weight: 10.6 kg

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 50A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0CA0 -Dimensions: 290/50/H480 mm -Weight: 6.8 kg

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2X15A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AB00-0AA0 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 25A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0BA2 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg

Computer monitor, screen, TFT industrial monitor -Monitor: TFT industrial monitor from CNC milling machine Mikron UME 600 -Type: 12.1 TFT industrial monitor 2363130 -Dimensions: 400/320/100 mm -Weight: 3.1 kg

PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board -Manufacturer: Mikron, electronic module circuit board from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 -Dimension: 145/110/H55 mm -Weight: 0.4 kg

for 180 lit , with lifter

With Lehmann rotary table and High pressure coolant unit X travel 700 mm Y travel 420 mm Z travel 380 mm Spindle speed 10.000 rpm Controller SIEMENS 840D

table diameter: 650 mm table load: 600 Kg swivelling range: 90 Grad turning speeds: 0,2 - 3,0 U/min total power requirement: 0,55 + 0,4 kW weight of the machine ca.: 0,28 t Welding rotary tilting table - Remote control - 2 x welding current transmission The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cleaning roll holder, floor stand, cleaning cloth roll holder -Manufacturer: Tork, Floor stand for cleaning cloth roll with waste bin -Type: W1 -Roller width: up to approx. 450 mm -Quantity: 5x cleaning roll holders available -Price: per piece -Dimensions: 710/590/H1010 mm -Weight: 8.1 kg/pc.

castor, swivel castor, transport equipment castor, fixed castor, heavy-duty castor -Swivel castor: with lock/brake -Wheel: Ø 125 mm -Width: 32 mm -Hole spacing: 78 x 60 mm / Ø 10 mm -Number: 216x swivel castors available -Price: per piece -Dimensions total: 175/80/H155 mm -Weight: 1.1 kg/piece

This single stage absorption chiller is on perfect condition ready to start working. It runs with hot water and use Advaguar as working fluid. Is available on two configurations, with the container where is installed and without it. Power:1500 kW Model: Millenium HW-3B2/4C1-50-C-S-C YOM: 2008 Frequency: 50Hz Voltage:400 V Working Fluid: Advaguard

vailable Harmonisation machine for grinding unbalanced PCR_Tyres Description attached! CE-certified

Millutensil spotting press BV25/PM - Output force adjustable (with max. pressure): 100 - 800 kgf - Ejector stroke max.: 120 mm - Hydraulic pressure adjustable from 5 - 100 bar - Width: 150 cm - Depth: 150 cm - Height: 200 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, spindle tool, gear motor -Spindle head: spindle tool 7.4 rpm -Gearbox: Type Z 8 i = 386 -Engine: Groschopp MDM 100.70 0.25 kW -Shaft: Ø 18 mm -Dimensions: 510/185/H240mm -Weight: 12.3 kg

x-travel: 560 mm y-travel: 500 mm z-travel: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,22,22,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stainless steel trolley / freezer trolley for trays 600 x 400 with 20 trays 4 swivel castors Dimensions: 470 x 600 x 1800 mm, WxDxH NEW Many more in stock!

Stainless steel trolley / freezer trolley for trays 60x80 or 2 x 60x40 with 15 trays 4 swivel castors Dimensions: 660 x 810 x 1800 mm, WxDxH NEW Many more in stock!

Freezer trolley for sheet metal 600x400 Stainless steel 4 swivel castors/wheels Dimensions: W 460 x D 600 x H 1850 mm 16 floors Occasion Many more stainless steel appliances in stock!

surface area: 800 x 425 mm no. of flutes: 6 groove width: 14 mm table length: 800 mm table width: 425 mm table load: 0,3 t total power requirement: kW weight of the machine ca.: 0,34 t dimensions of the machine ca.: 0,80,60,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WITH BASE CABINET Ser. No.: 12075 Book format: 320 x 220 mm (Max. 320 x 300 mm) Cover format: Cover size: 330 x 480 mm (Max. 330 x 680 mm) Book thickness: 2 - 50 mm Cycle speed: up to 300 cycles per hour Heat-up time: 30 - 40 minutes Equipment / Additional information: Adhesive: Planamelt R 1323-2

used rack oven Miwe Rollin RI 1.0608 TL for a rack trolley with exhaust hood and ramp for sale. -Rack oven Miwe Rollin -Model RI 1.0608 TL - for 60x80cm trays -with oil burner -Built in 2007 and 2009 -400/230V 3/N/PE -50 Hz -Door hinge on the right -with exhaust hood -with drive-on ramp - 2 pieces available in stock

Bakery oven With three floors and a stand Manufacturer: Miwe Model: CO 3 External dimensions: 150x130x140cm Internal dimensions: 120x80cm Capacity: 3x4 trays (60x40cm)

Bakery oven With stand Manufacturer: Miwe Model: Econo EC 6 Dimensions: 90x85/125x210cm Capacity: 6 trays (60x40cm) Electric power: 9.5kW

Manufacturer: Miwe Model: RI/FO 60/60 Dimensions: 135x195x255mm Electric power: 52.6kW 400V 50Hz

Table dimensions: 0/ mm Motor output: 0/ kW Spindle diameter: mm reus: U/min Weight: kg Year: Control: Haidenhain TNC 355 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: SPL-P 12001.20 Year of Make: 2007 CNC control 1 plasma torch with power source Kjellberg HiFocus 160i Extraction table: 2 x 12 m Donaldson Torit DCE filter system

surface area: 700 250 mm no. of flutes: 5 groove width: 12 mm total power requirement: 0 kW weight of the machine ca.: 75 kg dimensions of the machine ca.: 700250320 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. pressing force: 200 kN Max. tool height: 100 mm Manual and automatic mode possible With Siemens program control Operating instructions

For sale are intercoolers from a Mitsubishi S6R. The coolers were subjected to a test run ex works. When they arrived at our place, they were dismantled and stored. Traces of storage available Condition: as good as new (test run ex works) Model: 1A17031D Part Number: 37555-11200 Suitable for: S12R S6R S6R2

Punching force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shear Foot switch for stroke release Support table on the punching side Quick-change device Range of tools is included in the price

Number of sanding units: 1 st. sanding width: 150 mm Sanding height max.: 150 mm Loewer edge finishing machine MiniSpin N Machines for finishing and fine sanding of Edges and profiles with a grinding spindle horizontal or vertical. Motor 0,75 KW Spindle in vertical position for machining edges Pivoted spindle in horizontal position, laterally etc. for processing longer profile bars or Conjunction with a combined grinding head for grinding of edges with a grinding disc blades Grinding head swiveling + / - 20 ° for editing oblique lines Working height / width 150 mm max. Diameter roller / brush

: - Working width: - mm : - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Blum Minipress hinge drilling machine Number of drills 5 Fastening drill bits with quick-release fasteners Motor power: 0.75kw Pneumatic clamp Stroke of pneumatic power pack Maximum workpiece thickness 40mm

bizhub PRESS C1060 = Equipment No: 1817933817 – Digital Printing Machine Incl. DF-626 Original Feeder, PF-707 Paper Cassettes, SD-506 Finisher, PB-503 Perfect Binder, IC-308 ext. EFI Controller incl. VI-507 Interface kit, RU-509 Connection Unit

2 component gun, multi-function gun, cartridge gun, cartridge press, double cartridge dosing gun, 2K mixing gun -Manufacturer: Plunger, double cartridge dispensing gun Mixpac Strap Kit -Number: 2x cartridge gun available -Price: per piece -Dimensions: 300/210/H85 mm -Weight: 1.2 kg

welding current: max. 300 A open-circuit voltage: 55 - 76 V connected load frequency: 400 V weight: 75 kg Dimensions (LxWxH): 950 x 560 x 880 mm Inert gas welding machine: - with pulse function - 300 amps - 400 volts - hose package 3m. - ground cable - Wire feed rolls for 0.8 - 0.9 - 1.0 - 1.2 - 2.5 - 3.2 - 4.0 and 5.0mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bizhub C3350 = Equipment No: 1818829867 – Color MFP Incl. PF-P13 second paper cassette, FK-512 fax module

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Charger for forklifts: Miditron Type D 400G 48/100 PWF-PMT -Input voltage: 400 V 50 Hz -Power: 48 V/100 A -Dimensions: 555/530/H690 mm -Weight: 112 kg

Key data: 300 mm, 500 t, 350 mm

Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy.

Used machine in good condition. Available for immediate delivery. - Power source : 70 kVA - Control: SINUMERIK 880M - Driven tool speed: 6.000 rpm

Manuelle Winkelverpackungsmaschiene / Semi-Automatic Foil sealing machine ROBOPAC Micra M Year 2002 - Serial-No. 21037 Produktabmessungen / Product sizes Abmessungen der Schweißleisten (LxB) 540x390mm Produktionsleistung 300Produkte/Std. / Production 300pcs/h Elektrischer Anschluss / Power supply: 230V 1Ph 50/60Hz(V) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Continous Form Collator Micro Pack S 50 Serial-No. 92-164 / 1992/51/ mpkc 6 Stationen / Stations Format / Size max. 330 x 12 Zoll umstellbar bis auf 7 Zoll / convertible until 7 inch Standard 240 x 12 Zoll / inch Einlauf breite bis / Infeed width until 55 cm Crimpung alle 2 Zoll mit Ersatzmesser / Crimp every 2 inches with spare blade Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water tank -Pump: Motor Schlüter 1.5 kW -Container capacity: liters -Dimensions total: 850/620/H670 mm -Weight: 124 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Mitsubishi, frequency converter type FR-S520SE-0. 4K-EC -Power: 0.4 kW -Input: 200- 240 V 50/60 Hz -Output: 3PH AC200-240V 0.5-120Hz -Dimensions: 170/75/H180 mm -Weight: 1.3 kg