ge mi fu used for sale

Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 2x packages available -Price: per package -Weight: 7.6kg/package

Profile steel shears, hand lever shears, hand sheet metal shears, sheet metal shears, sheet metal shears -Scissors: 185 mm -cutting: 40 mm angle iron -cutting: Ø mm round steel -Dimensions: 460/985/H2220 mm -Weight: 88 kg

SPECIFICATIONS: Load capacity: 24 kg Lifting height: 3 meters External dimensions : 80x60cm H 400cm Interior dimensions: 51x32cm H 85cm

Lippelt Rustica Mini Square Bread Roll Line - with 3 cutting rollers - with moistening and seed sprinkling - Poppy Rumo - Both machines are mobile on castors - Completely clad in stainless steel - 1.0 kW - Built in 1999

In-store oven Miwe Aero 8.0604 with proofer - Digital Miwe FP control - for 8 trays 60x40 cm - with proofer - for 16 trays 40x60 cm - Steam Destroyer - 400/230V 3 / N / PE / 50 Hz - 15.4 kW -Electric Dimensions: 90 cm wide 100 cm deep 210 cm high

NNP High shear mixer Stainless high shear mixer, sits over a vessel with hopper to add product, shaft length 600mm, diameter of high shear head 120mm, 3Ph

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 25 l/min -Hydraulic tank: mm -Motor: kW rpm -Hydraulic valve -Pressure relief valve -pressure clock -Filter -Dimensions: 500/800/H850 mm -Weight: 248 kg

max. wheel diameter: 200 mm gear width: 400 mm max. module: 4,5 min. module: 0,3 weight of the machine ca.: 6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting width: max. 310 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW Speed: 2.800 U/min. Required air-pressure: 6-8 bar Working height: 900 +/- 20 mm Dimensions (L/W/H): 10645x1000x1300 mm SALVAMAC CLASSIC 50 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider -------------------------------------------------- - New machine from our demonstration room, Bj. 2022 Pos. 1: Classic 50 under table miter saw -------------------------------------------------- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW.  ...

Feed motor for inert gas welding device, inert gas device, gear motor, electric motor, direct current motor -Manufacturer: Migatronic -Type: 402535 24 volts -Number: 1x motors available -Price: per piece -Dimensions: 250/130/H160 mm -Weight: 3.4 kg

Tire with rim -Tire size: 16.00 R20 -Dimension: Ø 1320 mm -Weight: 246 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 60 bar -Liter output: 5.5 l/min -Hydraulic tank: 450/320/H320 mm -Motor: 0.75 kW 1400 rpm -Hydraulic valve -Pressure relief valve -pressure clock -Dimensions: 520/330/H600 mm -Weight: 100 kg

accuhead machine for containers up to 40 ltr. Extruder 90/24D. accuhead 6 ltr. Clamping force 350 kN. Cables partially renewed. Oil tank and pipes cleaned. New control system is prepared (B&R) and can be installed at short notice

DC power supply, Contactor -Manufacturer: Mintard -Type: R100 -Quantity: 1x supply available -Weight: 0.1 kg

Simple proofer / heating oven Model: Fermentation mobile 4060 longitudinal Thermal double glass door with soft closed LED easy control with timer Temperature adjustable from 30 to 90°C Humidity adjustable from 60 to 95% Stainless steel, convection Capacity: 20 trays 400x600 mm lengthwise LED Lighting Connection 230 V, 2.7 kW New device, mobile Weight: 166 kg 3/4 inch water connection Dimensions: 650 x 875 x 2020 mm, WxDxH with 12 months warranty Option: 60x40 transverse rack Brita Filter Many more TOP bakery machines in stock!

Key data: 600 , 450 , 450

Machine-Details Stock-No. 1105-04008 Type of machine Machining Center - Universal Make MIKRON AGIE CHARMILLES Type HPM 450 U - 5 Axis Year of manufacture 2012 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Switzerland Delivery time to be agreed Freight basis ex site Technical details X-Travel 600 mm Y-Travel 450 mm Z-Travel 450 mm control iTNC 530 Heidenhain Turning Speed Range - Main Spindle 20000 min/-1 power capacity - main spindel 30 kW max. Torque 91 Nm tool taper HSK A63 numbers of pallets 7 Size of pallet 350 x 350 mm max. pallet load 150 kg Swivellable B: -120 / +45° Rotatable C: 360° number of toolpositions 30 pos. Max. mould width 80 / (125) mm max. tool length 200 mm Change time ca. 3.0 sec max. tool weight 6 kg max. total weight 80 kg Rapid traverse 15 m/min Feed speeds max. 22,000 mm/min rapid traverse B: 50 min/-1 ...

- Used hydraulic power unit complete with control cabinet. - Ready to connect and ready to use. - E.g. for servo hydraulics use. - Litre capacity: 138 L/min. - Nominal pressure: Pmax 280 bar. - Electrical supply: 132 kW / 50 Hz / 400 V. - Incl. comprehensive and maintained components (see pictures). - Aggregate rental possible. - Other power units and hydraulic components available on request (sale/rental).

Laboratory fume cupboard, fume cupboard, suction -Connection: Ø 50 mm -Filter: 270 x 270 mm -Dimensions: 700/390/H370 mm -Weight: 31 kg

Laboratory fume cupboard, fume cupboard, suction -Connection: Ø 50 mm -Filter: 270 x 270 mm -Dimensions: 700/390/H370 mm -Weight: 32 kg

AT Sack fillers Midget Linear weigher and filler Serial: 08MM-3-22 Semi automatic single head linear gross weighing and filling machine, weight range 20g - 6Kgs, up to 1000Kgs per hour, compact design, simple to set up, ideal for packing granules, flakes, pellets, beads and much more, 1Ph

Croissant Wrapper Wrapping Machine Model: Rondi Croissantroller Stainless steel Tabletop appliance for the efficient production of croissants Easy to use for unfilled croissants Output up to 700 pieces/hour Connection 400V, 200 Watt, 16A-CEE plug Dimensions: 300 x 450 x 270 mm, DxWxH NEW Machine with 24 months warranty + service package Option: Driving table Maintenance contract We have many more bakery machines in stock!

Tool changer for lathe, upper support, upper slide, dovetail guide -with four tool holders -Dimension: see photos -Dimensions: 400/260/H200 mm -Weight: 25.2 kg

1 CNC lathe (lathe) 2 CNC lathe (lathe) 3 CNC lathe (lathe) 4 CNC milling machine (lathe) 5 2x conventional lathe (lathe) 6 Band saw 7 2x Stand drill All machines work perfectly Pick-up or delivery not until the end of July 2024

Used 4-weld sachet machine by MIFLEX-MASZ type AS-2TRS/2TRO. New 2005. Automatic sachet machine with auger dispenser for packaging of loose products. Width of packaging material - max 500 mm; Outer diameter of material bale max 350 mm; Diameter of the core of the bobbin 76 mm; Sachet size: - length (variable: photocell or settings in mm) in the range from 100 to 200 mm; - Width (fixed) in the range of 60 to 125 mm; - Portion size in the range of 10 to 60 grams; Capacity max 40 cycles, i.e. max 80 sachets/ min. Requires compressed air. Makes a 4-well sachet. Dimensions 60x100x220 cm Weight 700 kg

2 X ENGINES FOR SALE Brand: MITSUBISHI Model: S12A2 C2 MPTK (FW) Power: 634 kW (850 hp) 1940 rpm Specification: Flywheel housing: SAE-0, Flyvheel: 18 Inch, Starter: 2x 24V, Governor Cooling system: Keel cooled Remarks: R41E3022300 HS CODE 84081019 Dimensions (cm): 230 x 165 x 160 Dry weight (kg) : 3800

MITSUBISHI S6A-300-3 300 HP 1530 RPM (S6A3 MPTK 405 kW 1840 rpm) Dry Weight :+/- 1900 kg Dimensions: 209 x 101 x 137 cm

MITSUBISHI S16R-C2 MPTK (FW) Power: 1700 HP 1600 rpm Features: Flywheel housing,Flywheel,Starter,Governor,Exhaust system,Turbo, Cooling system Engine Specification: 16-cylinder 4-stroke Water-cooled diesel engine With direct-injection, turbocharger Air-cooler Fresh water cooling Bore x stroke (mm) : 170 x 180 Displacement (l) : 65.37 Dimensions (cm): 308.6 x 162.2 x 196 Dry weight (kg) : 6900 Type Approved: Yes

LISTING ID: 22764 BRAND:MITSUBISHI MODEL: S12R-MPTA POWER: 880 kW (1180 HP) RPM: 1600 RPM Running Take Out Features: Flywheel housing,Flywheel,Governor,Exhaust system,Turbo,Cooling system,Starter,Water Pump Weight Dry (kg) 5,470 Dimensions (cm) 241 x 158 x 180

Number of spindles: 3 St. Number of tools: 2/3 St. Spindle diameter: 40/50 mm 1 OKOMA folding machine model UF 2 EG ------------------------------------- 1. Energy data: - Operating voltage: 3 phases, 380 V, 50 Hz. - Compressed air: Air requirement: 13 NL/min. Operating pressure: 8 bar up. Air: according to Pneurop 6611 2. Profile spindle 1: - Spindle arrangement: right - Power 11 kW - Speed 7000 rpm - Direction of rotation: synchronous and counter rotation - Spindle diameter 40 mm - Usable length 252 mm - Tool diameter max. 230 mm - U-movement of the profile spindle - Positioning vertically Drive: pneumatic cylinder 120 mm cycle for 2 tool positions Position sensor: limit switch - Positioning horizontally Drive: Pneumatic cylinder forward-back Position sensor: limit switch - Automatic immersion: immersion speed can be regulated for tear-free Fold over - Pro ...

Minakuchi NWT-300 CNC Cylindrical (ROLL) Grinder, I.D. Spindle, Fanuc O-GC, 30HP, New 1990 Machine Overall Capacity: 32" x 120" Swing: 32" Distance Between Centers: 120" Max. Swing over Table: 32" Max. Grinding Diameter: 30" Max. Work Piece Weight: 20000 LBS. Estimate at 32" x 120" Grinding Wheel: 24" x 1.968" x 10" Max. Grinding Wheel Width: 1.968" Spindle Speed: 1410/1530 RPM Spindle Wheel Motor: 30 HP Machine Weight: 30000 Lbs. Approximately Equipped with: Control: Fanuc Series O-GC (Parameters need to be reloaded) Fanuc Remote Hand Wheel Machine control functions: Coolant On/Off Switches, MODE: Off/Auto/Jog/Handle/Zero, Over Ride: 0-150%, Buttons: PRC, HIX, Spindle Inching, OTR on/off Switch, Cycle Start, Spindle Off, RT, Return, Feed Hold, Grind Off, ZRN, Emergency Stop Button Taper or Crowning Grinding Wheel Head Motor Work Head Work Rest Supports Extra Wh ...

Thermal switch, circuit breaker, electrical circuit breaker -Imax: 10A/500 VAC 2A-24 VDC -Temperature: -30 °C/ 80 °C -Protection class: IP 65 -Weight: 0.4 kg

PRB CASE PACKER, MODEL MINIPOCKET Year of construction: 2002 Horizontal case packer with side loading. DIMENSIONS Total H: 2000 mm Total L: 2300 mm Total W: 1600 mm

- FAGOR 8055 control system - Max. turning Ø: 550 mm - Max turning length: 2000 mm - Tool turret with 8 stations - Travel distance: X= 300, Z= 2150 mm - Quill travel: 150 mm - Dimensions LxWxH: 4200 x 2100 x 2050 mm - Weight: 4,900 kg Accessories: various tools

x-travel: 600 mm y-travel: 450 mm z-travel: 450 mm b-axis: +-115/+30 c-axis: nx360 turning speeds: 20.000 U/min Tool adapter: HSK A 63 rapid traverse: 20 m/min Tools changer: Random 75 Pos. table-size: 350×350 mm table weight: 200 Kg Control: HEIDENHAIN iTNC 530 total power requirement: kW weight of the machine ca.: 7,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

new ultra-light construction site roll forming machine for double standing seam, with dismountable sides, 2 modules can be used for underfunding, as well as another Tool set for the production of double-sided overlays, so ferves can be used can be manufactured in a single pass (additional tool sets are an option), Sheet width: 720 mm Sheet thickness steel: 0.65 mm Sheet thickness aluminum: 0.8 mm Machine weight: 157 kg Dimensions: 1200 x 1400 x 560 mm Total power requirement: 220 V Colour: turquoise/white Profile height: 25 mm it Width adjustment Roll forming speed: 9 m/min

Crankcase for Mitsubishi S6R-PTA for sale. Year of Make: 2012 Power: 515KW/1500RPM

Injector nozzle complete, overhauled, ready for installation Mitsubishi No.: 37560-29000

Compact hydraulic guillotine shears, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the alignment and machining of large workpieces precise and easy. It is operated via a foot pedal, which frees up the hands to align the workpiece. Specifications: Cutting length: 1320 mm Sheet thickness: 3.5 mm Strokes / min: 35 - 47 Number of hold-down devices: 9 Pressure hold-down: 2.5 t Front support arms: 1000 mm Back gauge: 600 mm Cutting angle: 1/2 - 2° Motor power: 5.5 kW Equipment: - High-quality, high-alloy scissor blades with a high chromium content - 2-fluted upper blade, 4-fluted lower blade - Hydraulic cutting angle adjustment - Manual cutting gap adjustment (from 4.5 mm) - Generous support arms with adjustable stop - Side stop with double scale - Feeder work table with ball rollers - Full-length front  ...

calibrating sanding machine model LEVIGALTECNICA MIKRO SRTV/C mm.1000 second hand machine carpet in rubber max. working width mm.1000 machine composed by 1 belt combined : calibrating roller in rubber diam.mm.150 + pneumatic pad main motor power Kw 10 belt dimension mm. 2150 x 1030 feed speed of conveyor belt : n.02 speed m/min. 5 / 10 min. / max. working heigth mm. 3 / 165 volt. 380/50 weigth kgs. 800

Filter tray -Type: LR-D-MIDI-A -Pressure: max. 12 bar -Weight: 3 kg

Table dimensions: 2500x 780 mm Motor output: 7,5 kW Spindle diameter: , mm reus: 1.500 - 10.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vaisala MI70 - Package with a lot of accessories. - MI70 - HMP76B,(chemical purged and sensor preheating), last calibrated on 29.11.2022 - HMP77B, (chemical purged and sensor preheating)last calibrated on 29.11.2022 -Suitcase -Charger - MI70SET - Carrying strap for the suitcase - 2 x 211302, Calibration Adapter Set for HMK15 Calibrator - 211339 Connection Cable for 300-Series - 219687 USB Instrument Cable - 219685 USB - RJ45 Adapter Cable - MI70 Link Interface Software - Calibration documents for each sensor from 29.11.2022 The device can be tried out before purchase by arrangement in 28844 Weyhe. Optionally, I can also offer recalibration from the manufacturer or an accredited test laboratory.

Inv. Num. : 7681 Type: SABRE 1000 Producer: Cincinnati Milacron Generated: Parameters: Control system: HEIDENHAIN TNC 426CB X-axis travel: 1016 mm Y-axis travel: 508 mm Travel Z-axis: 558 mm

Conveyor belt, belt conveyor, conveyor belt, belt conveyor -Conveyor belt: with automatic lifting and rotating device -Belt width: 2x 50 mm, length 2385 mm -Distance: 410 mm -Geared motor: Lenze 0.55 kW -Speed: 51-293 rpm -Belt speed: 11-65 m / min -Dimensions: 1265/815 / H740 mm -Weight: approx. 248 kg

Electric motor, three-phase motor -Manufacturer: Skoda type 2.4 kW 1410 rpm -Power: 2.4 kW -Voltage 220/380 V -Shaft: Ø 24 mm -Length shaft: 55 mm -Construction: -Dimensions: 335/300/H230 mm -Weight: 36 kg

Welding rectifier, electrode welding machine, electrode welding rectifier -Manufacturer: Migatronic, welding rectifier type LDE 250 -Welding power: max. 250 A -Welding cable with electrode clamp -ground cable -Dimensions: 860/680/H650 mm -Weight: 164 kg

Stephan micro cutting and vacuum mixing plant, consisting of: Stephan Mikroschneider, machine type: MCH 20/VM, machine number: 726.107.02, year of construction: 2000, 400 V, 50 Hz, 26 A, 2925 min-1, (2x) Stephan Vacutherm mixing plants, machine type: VM/MC 450/450/20, machine number: 726.107, year of construction: 2000, 400 V, 50 Hz, 76 A, 42 kW, volume tank: 485 liters, permissible operating pressure container: -1 / 0.3 bar, permissible operating temperature container: 95 °C, Volume jacket: 38 liters, permissible operating pressure jacket: 4.0 bar, permissible operating temperature jacket: 152 °C, (2x) Fristam rotary lobe pumps, type: FLFNS 100L, pump number: 69244005 and 69244004, Packo centrifugal pump, type: ICP2-32-160/352, serial number: 30071, year of construction: 2000, Q: 30 m³/h, overall dimensions mixing plant: 4900 mm x 1950 mm x 3400 mm, incl. s/s platform with stairs, di ...

x-travel: 560 mm y-travel: 500 mm z-travel: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,2 m No. 4614 Mikron WF 31 SA Universal tool milling machine Working area: 560 x 500 x 400 Control: Heidenhain TNC 114 - active digital display Rigid angular table Spindle holder SK 40 Coolant device Speed range 40 - 4000 rpm Weight approx. 2450 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MINOX E-Tumbler Screening Machine --> New Machine from Customer Order for Illustration: -2-decker, screening in 3 fractions -2x ball knock cleaning -Lifting device -Safety clamping screws -Sieves of your choice; Fabric : areas in contact with the product in stainless steel 1.4301 (Aisi 304) 2-deck machine : 2.6m² / deck Drive : 4 KW

plate thickness: 3 mm pressure: ? t total power requirement: 3,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,3 x 0,9 x 1,1 m No. 3549 Notching machine BOSCHERT K 30 / 120 MINI No. 1 Working area: Table 800 x 450 Drive: 3,5 Foot switch Table 800 x 450 mm with T-slots 45° / 90° / 180° swivel 120° (2 x60°) Space requirement approx. 1300 x 900 x 1100 mm Weight approx. 850 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.