ge mi fu used for sale

Miwe Terminal Portrait Control Type: HF-CI metrics: 24.5cm Wide 195cm high

SK40 DIN 69871 Oil Feeder met Holder Weldon 40mm A= 65mm For internal cooling for rails without internal cooling through the spindle

SK40 DIN 69871 Oil Feeder Weldon 32mm

Mixer Bär AR 40 MK1 40 l bowl– 1 pcs; beater 1 - pcs bowl ang spiral stainless steel; power: 1,1 kW

Deck Oven Miwe Condo CO 5.0806-4E Year: 2017 Stone Slabs Oven Miwe Condo CO 5.1206-4E Electric - 5 shelves each 80x60cm - lower 4 floors have an entrance height of 13cm - top floor has an entrance height of 17cm - Each floor can be controlled separately - Top and bottom heat can be controlled separately - Each floor with separate steam function - with proofer - With steam condenser - With exhaust hood - Floor entrance height 13cm - Total connected load : 29,9kW - one double chamber 11kw each - Top floor 5.7 kw - Proofer: 2.2kW - Year of construction 2017 Dimensions: Width: 110cm Depth without hood: 115cm, with hood +40cm Height: 216cm

Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...

Brand Engine Model Power 880kW RPM 1600 RPM MITSUBISHI S12R- MPTA Serial Number 11091 General condition Excellent Condition Options Flywheel housing SAE 0 Flywheel Governor Exhaust system Turbo Cooling system Mechanical Turbocharged, single cooling, charge air cooler integrated in jacket watersystem Starter Panel Water Pump Weight (kg) 5,470 Dimensions (cm) 241 x 158 x 180

Dough kneading machine Model: SP 10 Protective cover with shutdown Table machine for max. 6 kg. flour Spiral kneader for max. 10 kg. dough Speed infinitely adjustable DGUV V3 tested Connection 230V, 400 watts, 2 amp. Weight 35 Kg. Dimensions: 300 x 510 x 450 mm, WxDxH Dough machine NEW with 12 months warranty Come to our sales shop !

Dough kneading machine Model: SP 15 Protective cover with shutdown Table machine for max. 8 kg. flour Spiral kneader for max. 15 kg. dough Speed infinitely adjustable DGUV V3 tested Connection 230V, 550 W, 2.5 Amp Weight 40 kg Dimensions: 340 x 550 x 450 mm, WxDxH Dough machine NEW with 12 months warranty Visit our great sales shop!

Dough kneading machine Model: SP 20 Protective cover with shutdown Table machine for max. 12 kg. flour Spiral kneader for max. 20 kg. dough Speed infinitely adjustable with timer DGUV V3 tested Connection 230V, 1100 W, 5 Amp Weight 50 kg Dimensions: 400 x 630 x 550 mm, WxDxH Dough machine NEW with 12 months warranty Come to our sales shop!

Brand Engine Model Power 880kW RPM 1600 RPM MITSUBISHI S12R- MPTA Serial Number 11091 General condition Excellent Condition Options Flywheel housing SAE 0 Flywheel Governor Exhaust system Turbo Cooling system Mechanical Turbocharged, single cooling, charge air cooler integrated in jacket watersystem Starter Panel Water Pump Weight (kg) 5,470 Dimensions (cm) 241 x 158 x 180

Used from plant disassembly. Siemens Simodrive Posmo-SI with Alpha gearbox Engine: 6SN2500-2BF00-0GG0 Transmission: TP 050-MF1-5 -071-000 Dimensions L x W): approx. 65 x 25 cm The machine is electrically tested before sale and receives a DIN VDE 0113 test report.

Shop oven Miwe Aero 4.0604 closet Miwe Aero AE 4.0604 shop oven with proofing cabinet, digital control Miwe Aero shop oven is characterized by outstanding baking result and high functionality.Sheet metal inserts are easily removable for cleaning even superficially, the Miwe Aero is very easy to maintain and clean. Easy operation by Miwe FP control with up to 30 baking programs.Integrated swath apparatus with clock and full swath program for fast and rich swaths.The viewing windows are with cool double glazing and bright lighting for the baking chamber. Miwe aero shop oven Type: AE 4 0604 digital Miwe FP control for 4 sheets 60x40cm with closet with swath destroyer Year of construction 2005 specifications: 400V / 230V / 50Hz 8.5 kW Dimensions with hood: Height: 178cm Width :90cm Depth: 100cm

Swimming / sinking system, swimming / sink container with discharge belt, washing bath, belt scrubber, belt washing machine for fruit and vegetables used Manufacturer: NUNBERGER conveyor systems Type KB 600 Filling height approx. 2 m Bathroom approx. 4 x 2.4 x 1.6 m Chain tape for discharge of sinking materials Bandwidth approx. 600 mm Belt drive with gear motor 1.5 kW (dismantled due to transport height) Total dimensions: approx. 5.5 x 2.4 x 3.1 m The plant was used in fruit and vegetable production. It is also possible to use plastic to clean. Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

We offer you here a used pallet rack stand of the Manufacturer's Mic Spica for purchase. Technical data on the pallet rack: Shelving system: Mic Spica The scope of delivery includes: 01x pallet rack, used Material colour: cream white Frame profile: 80 x 70 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 2,780 mm high 1,000 mm deep

Artech HD granulator SG 80 120 with 200 kW. Well suited for EBS, cables, used tires, plastics, AzV. Well maintained machine. Recently overhauled.

Walzenstuhl Kaffee Mühle Bühler-Miag MDWA-25/10A - used - For grinding cereals and similar raw materials. The Wahlzenstuhl was previously used for grinding coffee beans. Manufacturer: Bühler-Miag Type: MDWA-25/10A Masch-Nr.: 1291 Year: 1977 Opening top approx. 960 x 395 mm with perforated sheets Roll diameter 250 mm Roll length 1000 mm Manual indentation and disengagement Drive motor Bauknecht 7.5 kW Operating instructions/documentation for the machine available. Total approx. 2200 x 1600 x 1450 mm Weight according to instructions approx. 3100 kg Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Qty. 1 Second-hand overhauled 4-Hi cold rolling mill Mfc.: SUECO (Member of IHI Group) Material of rolling Series 5000 & 6000 The rolling mill has been bought in 2023 and total overhauled. All revamped and painted of mill housing, coiler, gear box, roll chock, and backup rolls etc. Installed new electrical controls, hydraulic system, work rolls and other essential components. Please note that the new owner invested USD 2.1 Million in 2023. Strip width: 400 – 600 mm (650 mm) Thickness: 0.05 – 2.0 mm Rolling speed: 300 m/min. Gear type: 3.5:1 ID 508 mm OD 1500 mm Coil weight: 5000 kg Work roll dia.: 200 mm (200 – 180 mm) Length: 740 mm Back-up roll dia.: 650 mm (650 – 630 mm) Length: 720 mm Work roll drive Main mill drive power: 300 kW, 0-600/1800 RPM R/Tension reel power: 110 kW, 0-600/1800 RPM L/Tension reel power: 90 kW, 0-600/1800 RPM

The machine is in good technical condition, a test run is possible by prior arrangement. (spindle 32 mm) + Mitsubishi E60 control. Bar feeder included – for bars up to 3000 mm! Max. turning diameter: 60 mm Max. turning length: 120 mm Circulation diameter over cross slide: 120 mm X-axis: 170 mm Z-axis: 170 mm Spindle bore: 34 mm Max. bar diameter when using the loader: 32 mm Spindle holder: diameter 85 mm Spindle motor: 3.7 kW Spindle speed: 100–5,000 rpm Rapid traverse (X and Z axis): 15 m/min Min. program input: 0.001 mm Max. tool diameter: 16 mm Machine dimensions (L x W x H): 1200 x 1000 x 1500 mm

Working widths: 2000 mm roll surface width: 2200 mm Fabric content: 48 Meter 0: 160 mm Roller covering: ALU Clouth speed: 20 - 200 m/min Cloth tension: 20 - 500 N voltage: 400 V / 50 Hz output: kw weight: t dimensions of the machine ca.: m cloth accumulator: 48 meters capacity Number of rolls: 15-axis guide rolls, Ø 160 mm made of aluminum type of material: double polyamide foil hose material thickness: 2 x 15 my to 2 x 50 my movable roller mill is moved up and down with 4 ball screws unit was disassembled after test run for transport The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: 50 x 50 x 5 mm round steel bars: 30 mm U-iron on the x-axis: 60 x 40 x 6 mm roll diameter - bore: 40 mm roll diameter -toolpieces: 118 - 148 mm turning speeds: 9,3 U/min voltage: 400 V / 50 Hz total power requirement: 1,5 kW weight of the machine ca.: 0,425 t dimensions of the machine ca.: 1,5 x 0,8 x 0,8 m • Machine has got a standard roller set for profiles: flat upright 50 x 10, flat 50 x 15, upright 30, square tube 50 x 50 x 2,5, retangular tube 50 x 25 x 2,5. further roller sets optionally: for exampel: 1 set (6 rolls) for round pipe D = 3/8 + D = 3/4, Surcharge for each extra roller set: € 440,-/set Machine in unused condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 520 mm height: 700 mm depth: 350 mm thickness of clamping plate: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m There are 2 pieces Width: 300 mm Height: 1200 mm Depth: 510 mm About usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshop You want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of driven axis: 1 guage width: 1435 mm pulling force - max.: 300 t motor: Deutz power fuel: Diesel weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The Screen Drum ASCO SD MINI is a foldable, semi-mobile unit designed for efficient screening in recycling, construction, agriculture, and gardening. As the MINI version of the SD COMPACT, it delivers flexibility and performance for handling various materials, including moist and sticky ones. Thanks to its vibration motor and robust design, it ensures smooth material processing whether fed manually, by excavator, or with a conveyor belt. Screened material is evenly discharged along the drum’s length, and larger pieces exit through a rear chute. The SD MINI offers stepless drum speed, reversible drum rotation, quick drum changes, multiple drum configurations, specific perforation solutions, a round drum with a cleaning brush, and an adjustable screen angle. Its variable height adjustment makes transport and operation easy, providing a powerful, user-friendly solution for diverse scr ...

working length: 6000 mm Working width: , mm Working height: , mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

aschinella details Warehouse number 1105-03380 Machine Type Machining Center - Vertical Sigma brand Type MISSION 2 Year of construction 2002 Control type CNC Control FANUC 18 M Storage location FRANCE Country of origin Italy Delivery time by arrangement Freight base from location Technical details x-path 750 mm y-way 400 mm z-displacement 450 mm Table clamping surface 900 X 400 mm table load 600 kg Tool holder SK-40 ( DIN 69871-A) Speed range 6000 rpm Spindle pitch 15 kW torque 191 Nm Spindle cooling with cooling agregat Tool magazine with TELLER MAGAZINE Places in the tool magazine 16 pieces( RANDOM) Suit bolts DIN 69872-A Control FANUC 18 M Information Accessories: NC STEUREUNG FANUC 18 M

For sale:Micro Motion MASS flow sensor Type: CMF 200 ANSI 300 LBS Exclusive channel Order number: 8000.3 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikx@gmail.com The price is exclusive of 21% VAT.

For sale: Micro Motion MASS flow sensor 1" Order number: 8000.22 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikx@gmail.com The price is exclusive of 21% VAT.