ge mi fu used for sale

General SKU213X072 LocationBarneveld MakeHosokawa Nautamix NV Haarlem (NL) Pressure Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume300 Ltr. Motor1.5 KW Specified Features - Conical mixer Conical mixercheck Capacity300 l. Largest cone diameter1200 mm Cone height1600 mm Dished topcheck Top drivecheck Motor1,5 kW, 230/400 volt, 1459 rpm Motorca. 0,4 kW Cantilevered screwcheck With jacketcheck Bottom dischargeDia. 270 mm MaterialStainless steel 1.4301 (304) Information TypeDBX-300 No.M18123 With switchgearcheck Floor space1,40x1,40 m Total height2,40 m Weight800 kgConical mixersHosokawa NautaMixers > Conical mixersBrand > Hosokawa Nauta What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

General SKU426U1359 LocationBarneveld MakeCollette Main Features MaterialStainless steel Volume150 Ltr. Motor11 KW Specified Features - Universal mixer MaterialStainless steel Universal mixercheck Capacity150 Ltr. Vessel sizesDia. 700x450 mm With covercheck InletDia. 80 mm Pneumatic operated outletcheck OutletDia. 200 mm With motor7,5/11 kW, 380 volt With lump breakercheck With motor3/4 kW, 380 volt Rotor speed2840/1430 rpm Information TypeGral 150 Mach.No.84MG15031 Year of constructionunknown With switchgearcheck Floorspace2,60x1,00 m Total height2,20 mUniversal mixersColletteMixers > Universal mixersBrand > Collette What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...

General SKU300U597 LocationBarneveld MakeCollette Main Features MaterialStainless steel Volume75 Ltr. Motor7.5 KW Specified Features - Universal mixer Universal mixercheck Capacitybruto 75 Ltr. (netto 50 Ltr.) Vessel sizesDia. 520x350 mm With covercheck InletDia. 50 mm, 20 mm Pneumatic operated outletcheck OutletDia. 130 mm With motor7,5 kW, 380 Volt, 1440 rpm Rotor speed203/306 rpm With lump breakercheck With motor2,2-3,3 kW Rotor speed1500/3000 rpm MaterialStainless steel 1.4306 (304L) Information TypeGral-75 Mach.No.90M67561 Year of construction1989 Mounted on framecheck With switchgearcheck (as is) Floorspace2,2x0,90 m Total height2,2 m Weight1680 kg Extra SpecificationsThe stainless steel contact surfaces in the machine are polished. The machine is supplied with: - Extra agitator equipped with scrapers. - Extra pan with transport cart. - Separate tran ...

General SKU072Y444 MakeGustav Spangenberg TypeVM-8 No.51022 Year of construction1967 LocationBarneveld Material Pan materialStainless steel Main Features MaterialStainless steel Volume8 Ltr. Motor0.37 KW Specified Features - Planetary mixer Planetary mixer(1x) 2 Mixing/kneading shaftscheck Motor0,37 kW (3080 V, (Ex)) With covercheck With pancheck Capacity8,0 l Pan sizesø 230 x 200 mm With mechanical liftingcheck MaterialStainless steel Information With switchcheck Floor space0,8 x 0,7 m Total height1,8 m Weight150 kg ATEX compatiblecheckPlanetary mixersSpangenbergMixers > Planetary mixersBrand > Spangenberg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneve ...

Offer 25434 Technical data: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Autom. Quill feed - Quill stroke - Wind cutting device 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

General SKU248T594 MakeMolteni LocationBarneveld TypeI 300 Main Features MaterialMild steel Volume250 Ltr. Motor7.5 KW Specified Features - Planetary mixer Planetary mixercheck Motorcheck 7.5 kW, 380 Volt (Ciem) With variable speed drivecheck Speed scraper1450-950 rpm With pancheck (2x) Capacity250 Ltr. Pan sizesdia. 700x680 mm MaterialStainless steel Information No.25-12 Year of construction1968 Floor space1,6x1 m Total height1,6 m Weight1500 kgPlanetary mixersMolteniMixers > Planetary mixersBrand > Molteni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU293X467 MakeMiele LocationBarneveld CEcheck TypeG7826 Main Features MaterialStainless steel Motor10 KW Specified Features - Miscellaneous MaterialStainless steel Motor10 kW, 400 volt Information No.00/74340434 Year of construction2009 Floor space0,90x0,80 m Total height1,95 m Weight505 kg Extra Specificationsusefull size inside chamber: 600x560x650 mmMiscellaneousMieleMiscellaneous > MiscellaneousBrand > Miele What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

: 0550 mm : 410 mm : 480 mm : 650x410 mm : BBT 40 : 10.000 U/min Motor Capacity: 7,5/11 kW max. table load: 500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU330W710 MakeGEA Collette N.V. Typeultimagral 600 Mach.No.06G0600036 Year of construction2006 Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume600 Ltr. Motor37 KW Specified Features - Universal mixer MaterialStainless steel 1.4401 (316) Gral-granulatorcheck CapacityGross 600l, net 300-400l, 600kg Vessel sizesDia. 1100 x 700 mm With covercheck InletDia, 100mm, 45 mm, 30 mm Pneumatic operated outletcheck OutletDia. 250mm With jacketcheck With motor37kW (400/690 V, 1480 rpm) With variable speed drivecheck Frequency controller With lump breakercheck With motor15kW (400/690 V, 2900 rpm) Information Mounted on framecheck LocationBarneveld With switchgearcheck (as is) CEcheck Extra Specificationsscope of this machine: - Collette Ultimate Gral 600. - system for cleaning (CIP) with 2x Milton pumps. - vacuum pump, Busch, ty ...

General SKU226N154 MakeG. Ferrari Fils SPRL Brussels TypeMelangeur en V No.97172 Year of construction1997 LocationBarneveld Main Features MaterialStainless steel Volume1400 Ltr. Specified Features - Tumbler mixer V-type tumbler mixer(1x) Capacity1400 ltr Diameter800mm Outletdia. 200mm With brake motor1,5 kW With variable speed drivecheck With safety gatescheck MaterialStainless steel 1.4301 (304) Information With switchgearcheck Floorspace4,5 x 2,3 M Total height4,0 M Weight2200kgTumbler mixersG. Ferrari & FilsMixers > Tumbler mixersBrand > G. Ferrari & Fils What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This Mazak SLANT TURN 40N - ATC Mill center 1500 was manufactured in 1986. A robust turn-mill centre, it offers reliable performance for various machining needs. Consider the opportunity to buy this Mazak SLANT TURN 40N - ATC Mill center 1500. Contact us for more information.

This 4-axis MIKROMAT 20V gantry milling machine was manufactured in 1998. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this MIKROMAT 20V gantry milling machine. Contact us for more information.

This 7-axis Miyano BNA-42DHY turn-mill centre was manufactured in 2011. It features a main spindle with a maximum bar diameter of 42 mm and speeds up to 6000 rpm, complemented by a counter-spindle that handles up to 34 mm and 5000 rpm. Equipped with two turrets, upper with 8 positions and lower with 6, it offers versatile machining options. Includes a chips conveyor and an IEMCA BOSS 545 E bar loader. Contact us for more information about this machine.

General SKU398W1238 MakeHermann Linden LocationBarneveld TypeK111-60A Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume60 Ltr. Motor5.5 KW Specified Features - Z-blade mixer MaterialStainless steel 1.4552, Stainless steel 1.4301 (304) Z-blade mixercheck Capacity60 l. Trough sizes430x525x500 mm With covercheck With jacketcheck Double gearedcheck Motor5,5 + 3,7 kW, 400 volt, 1420 rpm With variable speed drivecheck Frequency converter Screw dischargecheck Dia. 125 mm With variable speed drivecheck Frequency converter Information No.1726 Year of construction1995 Mounted on foundationcheck With switchgearcheck(as is) Floorspace2,20x1,30 m Total height1,60 m Weight2690 kgZ-blade mixersHermann LindenKneaders > Z-blade mixersBrand > Hermann Linden What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compa ...

General SKU325W681 MakeStable Micro Systems TypeTA. XT. Plus Mach.No.11506 Year of constructionunknown LocationBarneveld Floor space0,28 x 0,45 m Total height0,66 m CEcheck Extra SpecificationsTexture analyser.MiscellaneousStable Micro SystemsMiscellaneous > MiscellaneousBrand > Stable Micro Systems What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU446W1483 LocationBarneveld CEcheck Main Features Motor0.75 KW Inlet diameter10 mm Specified Features - Jet Mill MaterialStainless steel 1.4306 (304L) Jet Mills Grinding room sizeDia. 100x16mm InletDia. 10 mm Motor0,75 kW, 230/400 volt, 1400 rpm, (Ex) With variable speed drivecheck Speed18/59/147 rpm Information MakeMicro-Macinazione SA TypeLU 100 IR BD Number0106100.1046.2070 Year of construction2006 Mounted on wheelscheck With switchcheck Floor space0,80 x 1,40 m Total height2,15 m Weight490 kgJet MillsMicromacinazioneMills > Jet MillsBrand > Micromacinazione What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU249X197 LocationBarneveld Main Features MaterialStainless steel Volume250 Ltr. Motor4 KW Specified Features - Universal mixer MaterialStainless steel 1.4552 Universal mixercheck Capacity265 l., (249 l. ) Vessel sizesDia. 900x440 mm With covercheck InletDia. 120 mm Pneumatic operated outletcheck OutletDia. 200 mm With motorcheck ±7,5kW, 400V ( no type plate) With lump breakercheck With motor4,0 kW, 400 volt, 1425/850 rpm Rotor speed1425/850rpm Information MakeDiosna TypeV-250 Mach.No.210 120 Mounted on legscheck Mount.on stainless steel framecheck With switchgearcheck Floorspace2,30x130 m Total height1,40 m Weight300 kgUniversal mixersDiosnaMixers > Universal mixersBrand > Diosna What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are wel ...

General SKU365X869 LocationBarneveld CEcheck MakeRetsch TypePM400 Main Features MaterialStainless steel Volume0.5 Ltr. Motor1.5 KW Specified Features - Ball mill MaterialStainless steel Ball millcheck CapacityMax 4 x 500 ml Motor1,5kW, 230v Speed30-400 rpm Information No.9 1611 001 F Year of construction1999 Mounted on wheelscheck With switchcheck Floorspace0,83x0,70 m Total height1,20 m Weight285 kg Extra SpecificationsThe PM 400 is a robust floor model with 4 grinding stations for grinding jars.( no Jars included) It can process up to 8 samples simultaneously which results in a high sample throughput. Ball millsRetsch HaanMills > Ball millsBrand > Retsch Haan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barn ...

General SKU229X159 LocationBarneveld CEcheck MakeTatham / Winkworth TypeTFM 1000 Main Features MaterialStainless steel Volume1000 Ltr. Motor15 KW Specified Features - Paddle mixer MaterialStainless steel 1.4301 (304) Paddle mixercheck Double shaftcheck Useful capacity1000 l. Trough sizesLxBxH:1700x1500x1450 mm Inlet1000x1500 mm ManholeInspection hatch, 1100x500 mm Outlet2x 300x1230 mm Motor15 kW, 415 volt, Speed mixing shaft50 rpm Information No.16555 Year of construction2001 Floor space2,15x2,30 m Total height2,10 m Weight2900 kgPaddle mixersTatham / WinkworthMixers > Paddle mixersBrand > Tatham / Winkworth What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld ...

General SKU312X491 LocationBarneveld CEcheck MakePallmann Main Features Motor33 KW Inlet diameter120 mm Specified Features - Fine Impact Mill MaterialStainless steel 1.4552 Fine Impact Mills Turbo cone millcheck 2 Driven rotorscheck Rotor sizeInner roter ø 396 mm: outer roter 400 mm With grinding trackConidur 1,5: 2: 3 Housing dimensions ø 800 mm Inletø 120 mm Motor22 kW 400 V, 1470 rpm: 11 kW 400 V, 1475 rpm SpeedInner rotor 3000 rpm, outer rotor 1500 rpm Information TypePPS 4-120 No.139820170004 Year of construction2018 Mounted on framecheck Floor space0,9 x 2,8 m Total height1,5 m Weight1600 kgFine Impact MillsPallmannMills > Fine Impact MillsBrand > Pallmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine i ...

General SKU399X1180 LocationBarneveld CEcheck MakePLAS MEC S.r.l. Main Features MaterialStainless steel Volume13 Ltr. Motor11 KW Specified Features - Hot mixer Hot/Cold mixercheck Hot mixercheck Capacity10 Ltr. (13 Ltr.) With motorcheck (11 kW) With variable speed drivecheck Rotor speed5 — 50 rpm Manual operated outletcheck MaterialStainless steel 1.4301 (304) Information TypeDMP-13 Year of construction2016 Mounted on framecheck With switchgearcheck (supplied with electrical cabinet & control system: as is) Extra SpecificationsEquipped with an Industrial Frigo WTP 18/140 pressurized water temperature control unit: Temperature range from +10°C up to +140°C for accurate and stable thermal regulation Nominal operating pressure 3.4 bar, with system static pressure 0.5–0.8 bar Hot mixersPlasmecPlastic machinery > Hot mixersBrand > Plasmec What you can expect fr ...

General SKU399X1184 LocationBarneveld CEcheck MakePlas Mec TypeDMP-80 FV Pressure Working pressure5 Bar Main Features MaterialStainless steel Volume80 Ltr. Motor55 KW Specified Features - Hot mixer Hot/Cold mixercheck Hot mixercheck Capacity50 Ltr. (80 Ltr.) With jacketcheck With motorcheck (55 kW AC) With variable speed drivecheck Rotor speed5 — 50 rpm Pneumatic operated outletcheck Manual operated outletcheck MaterialStainless steel 1.4306 (304L) Information No.013 217 18 Year of construction2018 Mounted on framecheck (machine has a full steel basement frame) With switchgearcheck (electrical panel + local control panel: as is) Extra SpecificationsEquipped with an Industrial Frigo WTP 36/160/X pressurized water temperature control unit: Heating capacity 36 kW, indirect cooling system Temperature range up to 160°C for precise process control High-flow c ...

General SKU409X1231 MakeDrM LocationBarneveld CEcheck TypeTSD 316 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Filtercheck (Laboratory Filter) Filter surface0,012 m² Information No.1002561 Year of construction2017 Floor space0,9 x 0,5 m Total height1,65 m Extra SpecificationsTechnical specifications Filtration area: 0.012 m² Filling volume: 0.95 L Max. operating pressure: –1 / +20 barg Max. operating temperature: 250 °C Filter element: Stainless steel candle Gasket materials: FKM / PTFE / FEP Miscellaneous filtersDrM - Dr Müller AGFilters > Miscellaneous filtersBrand > DrM - Dr Müller AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in  ...

General SKU439X1388 LocationBarneveld MakeThyssen Henschel Main Features MaterialStainless steel Volume15 Ltr. Motor1.1 KW Specified Features - Universal mixer Universal mixer(1x) Capacity15 l. Vessel sizesø 295x235 mm With covercheck Manual operated outletø ± 65 mm With motor1,5 kW (400 V, 1420 rpm) Rotor speed86—535 rpm With lump breakercheck With motor0,5/0,75 kW, 400 V Rotor speed1500/3000 rpm MaterialStainless steel Information TypeHU/G-15 Mach.No.800891 Year of construction1986 Mount.on stainless steel framecheck With switchcheck Floorspace1,00x0,50 m Total height1,30 m Weight290 kgUniversal mixersThyssen HenschelMixers > Universal mixersBrand > Thyssen Henschel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ...

General SKU322X553 LocationBarneveld MakePuc Probst & Class Motor Motor power2.2 kiloWatt Main Features MaterialStainless steel Motor2.2 KW Inlet diameter55 mm Specified Features - Colloid mill MaterialStainless steel Colloid millcheck Rotor sizesø 60 x 40 mm Teethed rotorcheck With hoppercheck ø 300 x 500 mm Hopper jacketedcheck Inletø 55 mm Outletø 32 mm Motor2,2 kW (380 V, 2840 rpm) Information TypeK 60 No.92030 Mounted on wheelscheck With switchcheck Floorspace0,90 x 0,46 m Total height1,10 m Weight110 kgColloid millsPuc Probst & ClasMills > Colloid millsBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machi ...

General SKU357X1337 LocationBarneveld MakeBuss Main Features Motor21.5 KW Inlet diameter50 mm L/D15 Specified Features - Mixing extruder Single screw mixing extrudercheck Screw dia.46mm L/D15 With heating zones3 DC-motor0,710-21,5 kW, 380 volt, 50-1520 rpm Screw speed300 rpm InletDia. 50 mm Feeding with hoppercheck Max. temperature250 MaterialStainless steel Information TypeMDK 46B Mach.No.87/652482 Year of construction1987 Mounted on framecheck Floorspace2,70x0,55 m Total height1,90 m Weight1000 kg Extra SpecificationsWith 2-roll cylinder, roll diameter 150mm, roll length 400mm, 0:55 kW, 220/380 volt, 1400 rpm, roll speed 3,6-18 rpmMixing extrudersBussExtruders > Mixing extrudersBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are wel ...

General SKU435X1379 LocationBarneveld Main Features Motor7.5 KW Width340 mm Specified Features - Hammer Mill MaterialMild steel Hammer Mills Hammer millcheck Moving hammers24 Hammer width20 mm With sieve cagecheck Housing dimensions 340 x 500 mm With hoppercheck Inlet340 mm Motor7,5 kW (400 V, 1470 rpm) With variable speed drivecheck Speed882—1764 rpm Information MakeJehmlich GmbH Nossen SerialK190430 TypeHM 341 Year of construction2018 Mounted on framecheck With switchcheck With switchgearcheck Floor space1,45x0,62 m Total height1,95 m Weight600 kg Extra SpecificationsMax capacity up to 20 t/h.Hammer MillsJehmlich GmbH NossenMills > Hammer MillsBrand > Jehmlich GmbH Nossen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspec ...

General SKU379X949 MakePlastic Systems TypeDAC 30 No.DAC001-07 Year of construction2006 Main Features MaterialAluminium/Stainless steel Volume30 Ltr. Motor1 KW Specified Features - Miscellaneous dryer MaterialStainless steel Dryercheck (compressed-air desiccant dryer) Capacity30 l. Information LocationBarneveld CEcheck Extra Specifications Hopper capacity: 30 dm³ (≈ 30 L) Process air flow: 7–20 Nm³/h Process temperature range: 50–150 °C Heating power: 0.95 kW Total installed power: 1.0 kW Energy consumption at 80 °C: 0.11–0.29 kW (listed range) Compressed air (process) flow: 6–16 Nm³/h Compressed air (regeneration) flow: 4 Nm³/h Total max compressed air flow: 20 Nm³/h Required compressed air pressure: 6–8 bar (oil- and water-free)  : Miscellaneous dryersPlastic systemsDryers > Miscellaneous dryersBrand > Plastic systems What you can expect  ...

General SKU379X1448 LocationBarneveld MakeCollin TypeTischwalzwerk Main Features Size length210 mm Specified Features - Mixing mill Laboratory presscheck Motor4 kW 380 V Mixing mills MaterialStainless steel Information Mach.No.141 11 86 Year of construction1986 With switchcheck Floorspace1,13 x 0,45 m Total height0,60 m Weight150 kg Extra Specifications2 roller wals, roll dia. 100 mm, roll width 210 mm :Mixing millsCollinPlastic machinery > Mixing millsBrand > Collin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU347X810 MakeKemutec LocationBarneveld TypeA1500E Main Features MaterialStainless steel Volume1200 Ltr. Motor37 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity1500 Ltr. Useful capacity1200 Ltr. Trough sizesø 1000 x 1650 mm Inletø 150 mm Inspection hatch1100 x 600 mm Outlet550 x 480 mm Motor37 kW, 415 V 1465 rpm Speed mixing shaft97 rpm With lump breakercheck (2×, potentially 3×) Motor2x 4 kW, 415 volt, 2840 rpm Speed lumpbreaker2840 rpm MaterialStainless steel 1.4401 (316) Information No.100013 Year of construction1988 Mounted on framecheck Floorspace3,580x1,50 m Total height2,00 m Weight1700 kgPowder turbo mixersKemutecMixers > Powder turbo mixersBrand > Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide  ...

General SKU427X1334 LocationBarneveld CEcheck Pressure Working pressure15 Bar Main Features MaterialStainless steel Volume15 Ltr. Motor1.5 KW Specified Features - Miscellaneous pump MaterialStainless steel 1.4301 (304) Miscellaneous pumps Pumpcheck (Internal gear (gerotor) pump) Number of pumps:1 Capacity15 l/min With motorcheck (1,5 kW 230—400 V 1440 rpm: Ex) InletDN25 OutletDN32 Information MakeBühler Technologies GmbH TypeBFP 15-4-1.5 kW Mach.No.20190508007 37PU1507516 ATEX compatiblecheckMiscellaneous pumpsBühlerPumps > Miscellaneous pumpsBrand > Bühler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU390X1034 MakeLödige LocationBarneveld CEcheck TypeK-TM400 Pressure Working pressure0.5 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume400 Ltr. Motor15 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity510 l. Useful capacity400 l. InletDN80/165 Top connectionscheck Inspection hatchcheck 600x350 mm OutletDN150 With jacketcheck volume 45 l. Max. temperature200°C Glands air purgedcheck Motor15 kW, 290-500 volt, 1470 rpm Speed mixing shaft76 rpm MaterialStainless steel 1.4571 (316Ti) Information No.16697 Year of construction2012 Mounted on framecheck With switchcheck Floorspace3,00x0,80 m Total height1,80 m Weight1700 kgPowder turbo mixersLoedigeMixers > Powder turbo mixersBrand > Loedige What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new ...

General SKU409X1224 MakeNetzsch LocationBarneveld CEcheck TypeZeta RS2 Main Features MaterialStainless steel Volume2 Ltr. Motor15 KW Specified Features - Sand mill MaterialCeramic, Stainless steel 1.4301 (304) Horizontal sand millcheck Capacity2 l Housing dimensions dia 150 x 200 mm InletDN15 OutletDN15 With mechanical sealcheck With jacketcheck Motor15 kW, 400 volt, (Ex) With variable speed drivecheck Rotor speed500-2250 rpm With pumpcheck Motor0,55 kW, (Ex), With variable speed drive26-447 l/h, Information No.2800799-10 Year of construction2018 Mounted on framecheck on legs With switchgearcheck Floorspace1,620 x 0,995 m Total height1,760 m Weight1100 kg Extra SpecificationsWith blocking fluid vessel, flow meter, control/power cabinet, touchscreen control.Sand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in ...

General SKU390X1046 MakeBühler LocationBarneveld CEcheck TypeK-TM630 Pressure Working pressure0.1 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume630 Ltr. Motor15 KW Specified Features - Powder turbo mixer Lödige mixercheck Powder turbo mixercheck Capacity630 Ltr. Inspection hatchcheck With jacketcheck (63 Ltr.) Max. temperature0 — 200°C Motor15 kW, 290/500 V MaterialStainless steel Information No.15850 Year of construction2007 Mounted on framecheck With switchcheckPowder turbo mixersLoedigeMixers > Powder turbo mixersBrand > Loedige What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU351X817 LocationBarneveld MakeForberg TypeF1000 Main Features MaterialStainless steel Volume1000 Ltr. Motor15 KW Specified Features - Paddle mixer Paddle mixercheck Double shaftcheck Useful capacity1000 Ltr. Trough sizes1500 x 1700 x 1100 mm With covercheck Inletø 500 mm, 300 mm and 250 mm Outlet1000 x 300 mm Glands air purgedcheck Motor15kW 380V Speed mixing shaft± 40 rpm MaterialStainless steel 1.4552, Stainless steel 1.4301 (304) Information No.8041D Year of constructionunknown Mounted on framecheck Floor space1,3x2,75 m Total height4,2 m Weight3280 kg Extra SpecificationsThis paddle mixer is equipped with an output screw: Output screw length: 2 m Diameter: 150 mm Pitch: 100 mm Outlet: 160 × 140 mmPaddle mixersForbergMixers > Paddle mixersBrand > Forberg What you can expect from Foeth: -- Machine is in working condition -- At a reduced pr ...

General SKU340X781 LocationBarneveld CEcheck MakeIshida TypeDACS-GN-SE050-35-SS-I-S Specified Features - Miscellaneous transport Capacity32-5000g Motorcheck 230v Information No.560012087 Year of construction08-2017 Floor space0,95x0,75 m Total height1,37 m Weight100 kg Extra Specificationsishida checkweigher: Max belt speed: 90m/min max weight: 5000g minimum weight: 32g division value: 2g equipped with receipt printer conveyor length 950 mm conveyor height 750 mm, adjustable Miscellaneous transportIshida Co. Ltd.Conveying systems > Miscellaneous transportBrand > Ishida Co. Ltd. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU340X784 LocationBarneveld MakeBoekels TypeEWK 2000+/WS 1,25 KG CD Klasse X Main Features MaterialStainless steel Specified Features - Miscellaneous transport Capacity4-1500g Information No.VAB-13565-02 Year of construction2002 Floor space1,45x0,9 m Total height1,75 m Weight270 kg Extra Specifications boekels checkweigher: Max belt speed: 0,92m/s max weight: 1500g minimum weight: 4g division value: 0,2g conveyor length 1450 mm conveyor height 800 mm, adjustableMiscellaneous transportBoekelsConveying systems > Miscellaneous transportBrand > Boekels What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU329X704 MakeHermann Linden LocationBarneveld CEcheck TypeKIII5A Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume5 Ltr. Motor2.2 KW Specified Features - Z-blade mixer MaterialStainless steel 1.4301 (304) Z-blade mixercheck Capacity5 l. Trough sizes190x240x200 mm With covercheck With jacketcheck Single gearedcheck With adjustable packing glandscheck Motor2,2 kW, 400 volt, 1420 rpm With variable speed drivecheck Arm speed568 rpm Screw dischargecheck Motor3,7 kW, 400 volt, 1420 rpm With variable speed drivecheck Screw speed14/72/144 rpm Information No.1767 Year of construction1996 Mounted on foundationcheck With switchcheck With switchgearcheck Sizes switchgear0,60x0,40x2,0 m Floorspace1,30x0,80 m Total height1,50 m Extra SpecificationsWith Lauda oil heating, type K6 KSZ-blade mixersHermann LindenKneaders > Z-blade mi ...

MIKRON WF 3 DCM Universal Milling Machine Heidenhain TNC 151 control Table 800x380 mm x-travel 500 mm y-travel 500 mm z-travel 400 mm speed range 3150 rpm drive power 4 kW SK 40 Weight 1700 kg Many Accessories and tools

General SKU292W524 MakeDynomill LocationBarneveld TypeKD60 C Main Features MaterialStainless steel Volume60 Ltr. Motor44 KW Specified Features - Sand mill MaterialStainless steel 1.4301 (304) Horizontal sand millcheck Capacity60 Ltr. Motor44 kW, 380 volt, 1465 rpm Rotor speed1475/1170/940 rpm Capacity800-15.000Ltr. 450-550 kg/h Information No.880489 Year of construction1988 With switchcheck Floorspace2,0 x 1,1 m Total height1,5 m Weight1650 kg ATEX compatiblecheck Extra Specifications- Grinding media filling 48-51 l. : : - Peripheral speeds of agitator discs 16/13/10 m/sec Sand millsDynomillMills > Sand millsBrand > Dynomill What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visi ...

General SKU415W1308 MakeSiebtechnik LocationBarneveld CEcheck TypeESM 504-1 ks Main Features MaterialStainless steel Volume70 Ltr. Motor22 KW Specified Features - Ball mill Ball millcheck Capacity70 l (220 l bruto) Inlet⌀ 118 Outlet⌀ 118 Motor22 kW, 400 V, 1470 rpm Information No.47542 Year of construction2012 With switchgearcheck Floorspace1.51 x 2.52 m Total height1.55 m Weight2500 ATEX compatiblecheck Extra SpecificationsMaterial: Creusabro 4800 - wear resistant steel With sound proof cabinet Working hours 65 hrs Ball millsSiebtechnikMills > Ball millsBrand > Siebtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU288X384 MakeIka Werke TypeMHD 2000/05-ATEX No.200023306 Year of construction2020 Mounted on framecheck Main Features MaterialStainless steel Motor7.5 KW Rotor60 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 60x150 mm InletDN50 OutletDN32 Number of stages:2 Capacity700 l/h Motor7,5 kW, 400/690 volt, 2910 rpm, (Ex) Rotor speed6000 rpm MaterialStainless steel 1.4306 (304L) Information LocationBarneveld Floorspace0,70x0,40 m Total height1,20 m CEcheck ATEX compatiblecheck Extra SpecificationsTotal cap. 700 l/h, solids cap. Max 500 l/h.Inline high shear mixersIKA WerkeMixers > Inline high shear mixersBrand > IKA Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

General SKU364X867 LocationBarneveld CEcheck MakeHosokawa Alpine Main Features Motor18.5 KW Inlet diameter150 mm Width165 mm Specified Features - Hammer Mill Hammer millcheck Grinding room sizeø 300 mm Moving hammers24 Hammer width12 pieces 40 mm and 12 pieces 60 mm With sieve cagecheck Housing dimensions ø 300 mm Inletø 150 mm Motor18,5 kW (400 V, 2955 rpm) Speed6900 rpm Hammer Mills MaterialStainless steel Information TypeMP2-W No.P1 187094 /4050 Year of construction2013 Mounted on framecheck Floor space2,50 x 0,95 m Total height0,80 m Weight550 kg Extra SpecificationsWith: dust filter AZO blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpm Hammer MillsNew arrivalsHosokawa AlpineMills > Hammer MillsNew arrivalsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At ...

General SKU364X863 LocationBarneveld CEcheck MakeHosokawa Alpine Main Features Motor37 KW Inlet diameter150 mm Specified Features - Fine Impact Mill MaterialStainless steel 1.4541 (321) Fine Impact Mills Grindercheck With sieve cagecheck Housing dimensions ø 1000 mm With hoppercheck (for a milled product) Inletø 150 mm Motor37 kW (400 V, 2960 rpm) With variable speed drivecheck Speed820—4100 rpm Information Type500 UPZ No.P1 187094 Year of construction2011 Mounted on framecheck With switchcheck (as is) With control cabinetcheck (as is) Floor space1,35 x 0,95 m Total height1,0 m Weight960 kg Extra SpecificationsWith: dust filter blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpm For the UPZ 500 we have the following additional items on stock AZO Coolable screw conveyor — SKU: 364X866 DMN Machinefabriek ...

General SKU312X497 MakeEngelsmann LocationBarneveld CEcheck Main Features MaterialStainless steel Inlet diameter280 mm Specified Features - Miscellaneous transport MaterialStainless steel 1.4552 Miscellaneous transport Capacity2000 kg Information No.40014 Year of construction2014 Mounted on legscheck With switchgearcheck Floorspace1,60 x 1,70 m Total height1,35 m Weight500 kg Extra SpecificationsWith pneumatic paddle movement, Demag chain hoist, load capacity 1250 kg, Engelsmann big bag lifting frame, load capacity 2000 kg Miscellaneous transportNew arrivalsEngelsmannConveying systems > Miscellaneous transportNew arrivalsBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...

General SKU419X1299 MakeMorton Loedige LocationBarneveld TypeFM300D Main Features MaterialStainless steel Volume300 Ltr. Motor11.5 KW Specified Features - Powder turbo mixer MaterialStainless steel 1.4552, Stainless steel 1.4301 (304) Powder turbo mixercheck T-armscheck Capacity300 l Useful capacity250 l Trough sizes600 x1000 mm InletDia 100 mm Inspection hatch320 x 510 mm Outlet160 x 130 mm With adjustable packing glandscheck Motor7,5 kW(400 V, 1450 rpm) With variable speed drivecheck Speed mixing shaft150 rpm With lump breakercheck Motor4 kW(400 V, 2890 rpm) Speed lumpbreaker2890 rpm Information No.M23919 Year of construction1992 Mounted on framecheck With switchcheck With switchgearcheck Floorspace1,5 x2,2 m Total height1,8 m Weight900 kg Extra Specifications- through insulatedPowder turbo mixersMortonMixers > Powder turbo mixersBrand > Morton What  ...

General SKU347X802 MakeMorton LocationBarneveld CEcheck TypeFKM 3000 D-4MZ Main Features MaterialStainless steel Volume3000 Ltr. Motor37 KW Specified Features - Powder turbo mixer Lödige mixercheck Powder turbo mixercheck Capacity3000 Ltr. Trough sizesø 1110 x 2960 mm Inletø 250 Inspection hatch2x 540 x 400 mm Outletø 350 mm Motor37 kW,(400V, 1470 rpm) With variable speed drive115 rpm Speed mixing shaft127 rpm With lump breakercheck (4x) Motor4 kW, 400 V 2920 rpm Speed lumpbreaker3000 rpm MaterialStainless steel 1.4401 (316) Information No.24262 Year of construction1999 Floorspace4,00 x 1,65 m Total height1,80 m Weight1900 kgPowder turbo mixersMortonMixers > Powder turbo mixersBrand > Morton What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You a ...

General SKU347X806 MakeMorton LocationBarneveld CEcheck TypeFKM 3000 D-4MZ Main Features MaterialStainless steel Volume3000 Ltr. Motor30 KW Specified Features - Powder turbo mixer Lödige mixercheck Powder turbo mixercheck Capacity3000 Ltr. Trough sizesø 1110 x 2960 mm Inletø 250 Top connectionsø 350 mm Inspection hatch2x 540 x 400 mm Outletø 350 mm Motor30 kW, 380 V Speed mixing shaft115 rpm With lump breakercheck (4x) Motor4 kW Speed lumpbreaker3000 rpm MaterialStainless steel 1.4401 (316) Information No.M24066 Year of construction1995 Floorspace4,00 x 1,65 m Total height1,80 m Weight1900 kgPowder turbo mixersMortonMixers > Powder turbo mixersBrand > Morton What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine ...

General SKU409X1227 MakeNetzsch LocationBarneveld CEcheck TypeZeta RS2 Main Features MaterialStainless steel Volume2 Ltr. Motor15 KW Specified Features - Sand mill MaterialCeramic, Stainless steel 1.4301 (304) Horizontal sand millcheck Capacity2 l Housing dimensions dia 150 x 200 mm InletDN15 OutletDN15 With mechanical sealcheck With jacketcheck MotorV With variable speed drivecheck Rotor speed500-2250 rpm With pumpcheck Motor0,55 kW, (Ex), With variable speed drive26-447 l/h, Information No.2800170-10 Year of construction2016 Mounted on framecheck on legs With switchgearcheck Floorspace1,620x0,995 m Total height1,760 m Weight1100 kg Extra SpecificationsWith pump, 0,55 kW, (Ex), 26-447 l/h, blocking fluid vessel, flow meter, control/ power cabinet, touchscreen control.Sand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- M ...