ge mi fu used for sale

Key data: 190 mm, 450 mm

available Lab Mill! Description attached !

MICRONIZER JET MILL MC One Technical Data Nominal Estimated Batch size Process gas Process gas Installed diameter capacity 7 bar 12 bar power 33 mm From 0.1 From 0.2 gr 0.09 Nm3/min 0.18 Nm3/min _ (1.3 inches) to 50 gr/hr to 50 gr (3.18 CFM) (6.36 CFM)

Mixer for granules and powdered products Mixomat. Completely in stainless steel. Mixing tanks on load cells. Tegiloxane pump. Vacuum pump AZO 5.5 kW. Granulate gate valve NW 100.

Mixers for plastic granules and powdered products. Completely in stainless steel. Mixing motor 4 KW. Mixing chamber with separator on load cells. Pre-tank on load cells. Vacuum pump AZO 4 kW.

Used Glatt mixer for powders in bins. Type: Kontainer Mischer. Year of construction 1996. Leg spacing: 105 cm Paw length: 100 cm.

Continuous mixer, single-shaft mixer, trough mixer for bulk materials used Manufacturer: AVA-HUEP GmbH Type: HTK 2100 Year: 1999 Capacity 2090 l Temp max 80°C Mixer approx. Ø 900 x 2900 mm Outlet approx. 600 x 360 mm Drive with geared motor 55 kW RPM 380/660 V Dimensions Total approx. 6000 x 2000 x 2000 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Z Blade Stainless Steel Mix Extruder Manufacturer: Winkworth Model: 14Z HMX Working capacity 22-25 litre Approx total volume of trough litres: 32 litre with Hasco Hydraulics Ltd power pack With Panel YOM Jan 89

Z Blade Mix Extruder Manufacturer Winkworth Model 31Z HMX Mild Steel Total volume 360 litre Working capacity 250 litre Internal dims: 740mm long x 790mm wide x 714mm deep Screw 220mm With oil jacketed trough Lagged and with 3x electric drives

revolutions per minute: 8000 U/min x-travel: 1000 mm y-travel: 500 mm z-travel: 570 mm Control: Siemens weight of the machine ca.: 5000 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suitable for the mixing of pre-cut meat and fat with salt, nitrite salt, spices or additives for the production of burgers, ground meat, sausage, nuggets, kebab, various types of dry sausage, vegetables, cheese products and many more. The two mixing shafts with separate motors are independently switchable forward and reverse, at high and low speed. As standard the mixing shafts are equipped with paddles and partial spirals enabling a fast emptying.

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Manufacturer: Haffner, milling motor type M 30 -Power: 300 W 17000 rpm -Voltage: 200 V 300 Hz -Dimensions: 240/70/90 mm -Weight: 2.5 kg

Outside micrometers, micrometer screws, outside micrometers -Manufacturer: Mitutoyo, outside micrometer -Measuring range: 50-75 mm mm -Reading: 0.01 mm -Locking device -Other sizes: also available -Dimension box: 250/145/H35 mm -Weight: 0,7 kg

Internal micrometer screws, micrometer screw, inner diameter, internal fine measuring instrument, cylinder gauge, -Handover: in its current condition as inspected -Condition: incomplete, see pictures -Measuring range: -150 mm -Dimensions: 280/450/H60 mm -Weight 2 kg

MIKRON Cutter Mod. VCP 1000 Machinable dimensions: square = 125x125 round 152 Machine visible in operation, in excellent condition.

Key data: 1000 mm, 750 mm, 750 mm

Travel X/Y/Z: 1000/750/750 mm Tool changer: ISO 40, 30 places Spindle speed: 12000 rpm Control: Heidenhain TNC 426 Machine is still under power... If you have any questions, just call or write.

REF-2366 TATOMA MT-13-E HORIZONTAL UNIFEED MIXER 6000KG WITH LOAD CELLS Horizontal unifeed mixer for solids with load cells Manufacturer: TATOMA Type: MT-13-E Serial no.: 1000 Year: 1998 Capacity: 6,000 kg Volume: 13 m3 ABB motor: 75 HP/55 kW. 1,500 rpm Tank dimensions: length 4,450 mm, width 1,780 mm Outfeed height: 700 mm Overall dimensions: length 6,500 mm, width 2,300 mm, height 2,700 mm CE marking

Mikron Universal Milling Machine Type 21D Heidenhain Control TNC 355 Tool holder ISO 40 21 spindle speeds from 40 - 4000 rpm Clamping table 350 x 700 mm Displacement distances: X=450 mm / Y=400 mm / Z=400 mm 400 V Control voltage 24 V Total weight approx. 2410 kg

Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 130mm Made of stainless steel Lowest noise level Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Weight: 850kg

Manufacturer: Seydelmann Type: Grinders Mixer 2-speed working worm 1-speed mixing paddle motor, 1.5 kW with 2 mixing arms, independent of working worm Height: 1450 mm Width: 900 mm Length: 1250 mm Voltage: 400V 50Hz 3N Power: 20.0 kW 37 A Throat Diameter: 130 mm Main material: Stainlees Steel Machine weight: 680 kg

Fully functional Mikron Milling Machine Location of the machines: 76661 Philippsburg The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.

Used stainless steel conical mixer for bulk materials type MR-05. New 2015. Capacity 3000 L Rotational speed of screw 320 rpm, Power 5,5 kW, Total weight 500 kg.

Specifications: Travels X/Y/Z 400 x 400 x 375 mm Max. clamping area 350 x 800 mm Speed range (12) 50 - 2240 min-1 Feed, infinitely variable 1 - 630 mm/min Rapid traverse, max. 1.4 m/min Total connected load 4.7 kW Dimensions (LxWxH), approx. 1300 x 1215 x 1700 mm Weight with pallet, approx. 1700 kg Equipment: Digital Rigid angle table Coolant Setup

- Travel X/Y/Z: 500/500/380 mm - Speed range: 50 - 2240 rpm -Power. 1.8 / 2.6 KW - Spindle brake - Feed: X-Y-Z infinitely variable 1-750 mm/min - Rapid traverse X-Y-Z 1400 mm/min - Rigid angle table 450 x 800 mm - Spindle holder SK 40 M16 (ISO 7388-1) - Weight approx. 1650 kg - Space requirements: L x W x H: approx. 1700 x 1800 x 1800 mm

x-travel 800 mm y-travel 500 mm z-travel 460 mm Table size 1000 x 500 mm Spindle holder ISO SK 40 Spindle speeds - infinitely variable 31.5 - 6150 rpm Operating voltage 380 V CNC control heidenhain 425 Rapid traverses 6000 mm/min Quill stroke 90 mm Coolant tank l Total power requirement 13.5 kW Machine weight approx. 3.1 t Dimensions approx. 2.20x2.70x2.35 m Hydraulic tool clamping full 4th axis + 5th axis +45° -20°

Double-end tenoner, edge processing machine, flush trim router bit, edge router bit, spindle motor, milling motor -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz -Motor: mounted on guides -Motors: swiveling -Cutter: with indexable inserts -3x consoles: each with 2 motors Price: per piece -Weight: 60 kg/piece

Digital Screw Gauge from Mitutoyo 400-425 mm Overgrip new in the original wooden box with test certificate

Universal milling angle head, milling angle head -Receptacle: Collet -Recess inlet: Ø 160 mm -Bolt circle: 174 mm -Milling spindle: 45° -fully swiveling -Dimensions: 200/185/H320 mm -Weight: 20 kg

x-travel: 600 mm y-travel: 600 mm z-travel: 460 mm total power requirement: 4 kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 25.000, -Usable volume approx. 22,500 liters - Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 44.000, -Usable volume approx. 36,000 litres -Max product weight : 27.500 kg -Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

Cone Mixer, Conical Screw Mixer V-MIX Mixer Type 44.000, -Usable volume approx. 36,000 litres -Max product weight : 27.500 kg -Adaptation to all bulk weights -Containers and lid parts made of stainless steel -Hollow transmission shaft and gearbox cover to the inside of the container made of V2A -Swivel arm made of stainless steel -Mixing screw consisting of mild steel clad in stainless steel -Pneumatically driven side spout made of stainless steel - ATEX version possible -Drive motors manufacturer Nord -All lubricants are H1 and Halal approved and certified

2018 Grieser Vacuum butterfly mixer. Key details about the system: Manufacturer Grieser Year of construction 2018 Operating hours approx. 700-800 hours. 3 associated containers Documentation available Vacuum butterfly mixer Total connected load approx. 18 kW Operating voltage 400 V/ 50Hz Control voltage 24 V DC Machine weight approx. 2400 kg (without container) Max height 2450 mm (stroke 650 mm) Width approx. 1360 mm Long approx. 2641 mm Zones not Ex 3 butterfly stirring inserts Butterfly 72-720 min^-1 Wiper arm n=16 min^-1 Sight glass with light on hood On the hood pressure gauge, analogue and pressure transmitter connection TC-DN25 Vacuum pump 1.5 kW 1500 min^-1 Container clamping with quick release and one-sided monitoring with safety initiator Control panel with control panel in control cabinet Paint finish RAL 1013, pearl white smooth lacquer Container Mixi ...

1967 Maschinenfabrik Gustav Eirich DZ 2 Compulsory mixer 1500 L Manufacturer: Maschinenfabrik Gustav Eirich Type: DZ 2 Baujahr (Year of Manufacture): 1967 1973 Maschinenfabrik Gustav Eirich Compulsory mixer 2500 L Year of Manufacture: 1973 Weight: 4500kg There is a material elevator available for each one. Find more here - / Contact us at -

We offer a Milling Machine Routing Star V that is an ideal choice for automotive component machining and other high-precision tasks. We have four machines available from different years ( 2012, 2014, 2017) Technical Data: Dimensions (L x W x H): 5600mm x 2990mm x 2950mm Weight: 8000 kg Power Rating: 12 kW Connection Power: 3 x 400 V, 50 Hz Hydraulic Working Pressure: Max (bar not specified) Pneumatic Working Pressure: Not specified Table Size: 1400mm x 700mm Table Type: Rotating Table Number of Robots: 2 Tool Changer: Yes Find more here - / Contact us at -

Batch Mixer, Ploughshare Batch Mixer, 1600l Capacity, 22kw

Material : Areas in contact with the product in stainless steel Year of construction : 2014 Volume : 750 ltr. Drive : 45 KW

Ploughshare mixer, used Type : PSM 200 / 1 MK Manufacturer : MINOX Maschinenhandels GmbH Volume : 200 ltr. Material : Areas in contact with the product in stainless steel Drive : 2.2 KW 1 x cutter head : 3000 rpm --> incl. control cabinet and base frame

Millutensil BV 30 ERGYear of manuf. : 2022 Control : Siemens Simantic HMI ____________Description:In Generel:Table dimensions:1,500 x 1,000 mmMax. clamping force:500 kNMax. load capacity top plate:2,500 kgMax. load capacity under plate:7,000 kgRG version:plate can be pulled out and tilted:

Laboratory Ploughshare Table, Demonstration Machine Volume : 10 ltr. Material : Areas in contact with the product in stainless steel

x-travel:600 mm y-travel:500 mm z-travel:450 mm weight of the machine ca.:3,5 t

Exchange units for contour milling HOMAG

Hobart mincer Stainless mincer, 150mm mincing plate diameter, with spare plate and blade, 3Ph

Key data: 300 mm, 600 mm

Iddon 24inch (600mm) x 12inch (300mm) Two Roll Mill Chilled cast iron rolls Rotary joints Right angle drive Radicon Gearbox Fulton Rotary joints AEI electric construction motor Safety bar back and front of mill

ATEX air micronizing mill manufactured by BACHILLER in stainless steel, model JET-MILL MSB305. High efficiency equipment, very suitable for the micronization of all types of powdery products. Includes bag filter reference C9905 Material 316/316L stainless steel Technical features Model JET-MILL MSB305 Year of manufacture 2004 Equipment configuration ATEX Condition As is Made by BACHILLER

quill dia 110 mm quill stroke 100 mm ISO 40 (DIN 2079) 360° swiveling of the spindle head previously used on Hermle UWF 1000

Stainless steel mill, manufactured by STEPHAN, model MICROCUT MCH 20k. Year 1998. Capacity 1200 L. Motor power: 15 kw at 2925 rpm 50 Hz 400 V. Hopper dimensions: Upper bottom: inner width 470 mm, inner length 540 mm. Lower bottom: inner width 170 mm, inner length 300 mm Material Stainless steel Technical features Model MICROCUT MCH 20K Year of manufacture 1998 Transport information Length 1400 mm Width 700 mm Height 1550 mm Weight 1200 Kg Made by Stephan

Key data: 150 mm, 300 mm

Two Roll Rubber Mixing Laboratory Mill Manuf.: JRD Bipel 300mm x 150mm rolls Roller type bearings Nip fully guarded Motorised nip adjustment Roller speed variable up to 32 rpm Friction ratio 12:1 Grease lubrication Roller reverse system

REF-2488 KOLBE MW32 MEAT MIXER GRINDER WITH 100 mm PLATE Meat mixer-grinder with product feed Manufacturer: KOLBE Model: MW32 Machine no.: 125277 Plate diameter: 100 mm (32) Main motor power: 5.5 kW/7.5 HP Mixer motor power: 1.1 kW/1.5 HP Overall dimensions: largo 1.150 mm, ancho 900 mm, alto 1.800 mm

Key data: 630 mm, 500 mm, 460 mm

Speed range: 31.5 - 3150 rpm Control Heidenhain TNC 155 Feed speed: 1 - 3000 mm/min. in rapid traverse X -Y: 6000 mm/min. in rapid traverse Z: 4000 mm/min.

Tatham Twin shaft paddle mixer Serial: CO1040 Stainless, 1200Kg twin shaft paddle mixer, New motors, new gearbox, new chains, with stainless holding hopper at base