ge mi fu used for sale

A G+H precision cylindrical grinding center is available. Distance between centers: 600mm, center height: 140mm, max. swing diameter: 275mm, max. workpiece weight overhung/between centers: 30kg/100kg, X/Z feed rate: 8m/min, workhead taper: MT4, tailstock quill stroke: approx. 35mm, tailstock taper: MT4, grinding wheel dimensions X/Y/Z: 400mm/50mm/127mm, max. speed: 1425rpm, internal grinding spindle speed: 16800rpm, max. grinding wheel diameter: 100mm, filter capacity: 300l, filter flow rate: 100l/min, chuck: three jaw chuck, chuck diameter: 160mm. Machine dimensions X/Y/Z: approx. 3000mm/2700mm/2050mm, weight: approx. 4500kg, operating hours: approx. 350h. Including chuck, magnetic fixture and dressing unit. Documentation vorhanden. An on-site inspection is possible.

2-SHAFT SHREDDER 1.250 mm.90 kW, for waste of plastics, WEEE, light metals, cables, tyres, bulky waste and more, This is a versatile 2-shaft shredder, a new machine engineered to offer the best possible results in size reduction of various materials., Constructed entirely in Italy, according to the latest safety regulations with top quality materials and components., Reliable, evergreen, economic when compared to other EU brands of same quality, this machine comes from our long experience in size reduction of differente waste materials., Post-sale assistance is available with us and our 24/7 on whatsapp.., n.2 x 1.250 mm long shafts, 13-15 tpm Shredding chamber :1.250 x 900 mm, Electric motors 2 x 45kw (or bespoke to project), planetary gearboxes, grease lubrication, inverter for reverse movement on pre-settable threshold, n.12 knives in sturdy steel, 100 mm.thick, 2 hooks (for plastics, ...

A complete GEW UV curing system for a Gallus Labelmaster LM 440 is offered. Max. UV output: 140W/cm, UV lamp housings: 11, including 9 housings with lamps and 2 housings for screen printing modules, Operating hours: approx. 2900h/lamp, HMI: for 10 stations, Control system: GEW RHINO HMI. Including 2 RHINO control cabinets, 2 fans, a complete exhaust duct system and mounting kit for the Gallus Labelmaster LM 440. An on-site inspection is possible.

Made in sturdy painted carbon steel or AISI 304 stainless steel, drained or covered,.. Customized to your project, just send us your sketch with length, inner and outer diameter, drive, configuration or share your project with us and we will offer you the best solution.

The GEA Westfalia SA 35-01-076 is used in the butter oil industry as a continuous, self-cleaning centrifugal separator that polish the butteroil after the product is concentrated by a concentration separator., Machine comes with the bowl, motor (18,5 kW), base plate with feet, cyclone, water valves, all inlet/outlet pipes with pumps, service tools for maintenance and a big lot of spare parts., Additional features:, � ��Excluding:, - Motor cover., - Control panel., This separator is part of a butteroil production and purification process. The process flow is illustrated in the attached P&IDs and flowcharts., Butterfat is first melted and conditioned in the T100 process. During melting, citric acid is added at a dosage of 0,5 kg per 1.000 kg of butterfat. The melted product is then transferred thro ...

CONVEYOR BELTS SYSTEM to load scraps onto shredder or granulator, 1st conveyor, made to open the bale and manually separate materials, width 1.200 mm., length 5.000 mm. horizontally set, plain belt which can be either in PVC or RUBBER,, supporting structure made in sturdy carbon steel with short walls, Adjustable speed (average 15 m/min, 2nd coveyor, meant to lift pre-selected material onto the machine, width 1.200 mm, length 5.500 mm 30°inclination, Belt can be either in PVC or RUBBER, fishbone orwith draggers, supporting structure made in sturdy carbon steel, side walls 500-700 mm high, Adjustable speed (average 60 m/min, These machines are prepared to be connected to an existing electric panel to be synchronized with the main machine, availability: 3-5 months from drawing confirmation, working width: 1200 mm., options available: different angle, size, bekt material,..

Description Item #8857 – HOMOGENISER Manufactured by GEA NIRO SOAVI Model Ariete NS2006 L Energy Current owner purchased refurbished by GEA in 2013 original year believed to be 2006 suitable for pharma products MAX Viscosity UP TO 500 cP MAX Working Pressure 1500 bar Flow Rate Type F F = Fixed MAX Flow Rate 35 L/h @ 50 Hz MIN Feed Pressure 4-5 bar MAX Backpressure 5 bar MAX Product Temperature

Key data: 1250 mm, 1 mm

Qty. 1 Second-hand cut-to-length line including straightening, polishing and grinding units Manufacturer: UNGERER / GEORG, EMG, IMEAS Built: 1986 / 1997 /1998 / 2009 still in operation Material: stainless steel Strip width: 500 – 1.250 mm Thickness: 0.40 – 1.00 mm Coil weight – DECOILER max.: 10.0 t RECOILER max.: 5.0 t Coil ID – Ø 500 mm OD – Ø 1.500 mm Sheet length: 500 – 6.000 mm Stacking weight max.: 4.000 kg Working speed – grinding max. 20 m/min. Working speed – grinding + brushing: 4 – 12 m/min. Working speed – brushing: 4 – 6 m/min. Working speed – cutting max.: 20 m/min. Working direction right ⇒ left Length tolerance ± 0.40 – 3.000 mm

honing diameter: 80 mm stroke: 280 mm throat: 300 mm total power requirement: 6 kW weight of the machine ca.: 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. Hydraulic infeed of the tool. Switch-off via timer. Air measuring device (probably). Honing oil unit. Various splash shields, etc. Condition : Good. Machine can be in ...

puncher: 100 t round bar steel: 50.0 mm square edge steel: 50 x 50 mm L-beam: 150 x 150 x 13 mm hole punching press: capacity (dia. x thick.): Ø 30.0 x 26 mm shear: flat material: 600 x 15 mm throat: 300 mm work stroke: 80.0 mm work height max.: 1165 / 960 mm total power requirement: 9.0 kW weight: 2250 kg range L-W-H: 2050 x 1200 x 2050 mm well-maintained condition () current new price approx. 30.000 euros special price on request Equipment: - electro-hydraulic profile steel shears with 4x work stations Flat steel shears Profile steel shears Hole punch notching station - driven by two hydraulic cylinders - Infinitely variable stroke adjustment - Support table at hole punching station - Material scraper - Lateral storage options - 2x freely movable foot switches - Many accessories included in the scope of delivery swiveling machine lamp Various punch dies Spare blades for the  ...

saw blade diameter: 300 mm cutting diameter: 100 mm capacity 45 degrees: flat: 105 x 80 mm capacity 45 degrees: round: 100 mm capacity 60 degrees: flat: 80 x 70 mm capacity 60 degrees: round: 90,0 mm dimensions of saw-blade: 300 x 2,5 x 40 mm hole of sawblade: 40,0 mm stroke: 150 mm cutting speed: 17 + 33 U/min voltage: 400 V weight: 340 kg range L-W-H: 1000 x 800 x 1600 mm Features: - Machine cabinet with built-in coolant system - Vertical saw head guide - 2 speeds - Very large work surface and turntable - Mitre adjustment on both sides: 60° to the left / 45° to the right - Clamping vise with lateral quick-adjustment and double clamping arm - Precise prism guide for the gear head - Operatorâs manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

taper MK: MK5 round table: ja weight of the machine ca.: 1.200 kg Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geho ZD 900 in sound-damped housing with Hatz 1D81Z diesel engine. The ZD900 piston pump is designed for vertical and horizontal dewatering. These positive displacement pumps are self-priming and extremely suitable for pumping a mix of water and air without any restrictions. In addition, these pumps can run dry without any worries, without causing damage or wear to parts. Can be delivered in any desired coupling/connection MAX 95m/h MAX: 20 MWK Several pieces in stock Please call or email us, we are happy to help you. Additional information: FEATURES - Very quiet noise level - 47 dB(A) at 10 meters - Diesel engine 1D81Z - Easy access to motor and pump - Stackable thanks to sturdy integrated stacking corners - With forklift tubes for easy transport BENEFITS - Small and light, large in capacity, efficiency and lifespan - Very quiet, 47 dB(A) at 10m. - All panels/doors are made of galvanize ...

This diesel-powered GEHO ZD 300 double-acting piston pump in a soundproofed casing has the great advantage, compared to its big brothers, of its light weight and compactness. The great efficiency of the ZD 300 ensures an enormous capacity., Feel free to call or email us for the possibilities., , Throughput capacity: 35 m3/h, Motor brand: Hatz, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 895 kg, , = More information =, , Year of manufacture: 2025, Applicable material: Water, Empty weight: 895 kg, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you ...

The GEHO ZD300 piston pump is designed for vertical and horizontal dewatering., The pump has been fully checked in our workshop. This version is built on a T-frame, the pump is driven by a 400V electric motor., This positive displacement pump is self-priming and extremely suitable for unlimited pumping of a mixture of water and air., In addition, this pump can run dry without worry, without causing damage or wear to parts., , Can be supplied with any desired coupling/connection., , MAX: 35 m3 per hour, , MAX: 20 MWK, , Throughput capacity: 35 m3/h, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 850 kg, , = More information =, , General information, Year of manufacture: 2001, Applicable material: Water, , Weights, Empty weight: 850 kg, , Functional, Connector size: 4 Cardan, Cargo space capacity: 580 l, Quick coupler system: Yes, , Condition, Technical condition: very good, Visual ...

The legendary GEHO ZD900: Built for the future., Why choose the Electric GEHO ZD900?, Zero Emissions: The perfect solution for projects with strict environmental regulations (urban areas and nature reserves)., Unrivaled Efficiency: With a hydraulic efficiency of over 90%, this is the most energy-efficient choice., Low Maintenance, Self-Priming & Dry-Run Safe: The ZD900 effortlessly handles both water and air, reaching a vacuum of up to 9.6 meters., Technical Specifications:, Power: High-performance 400V electric motor., Capacity: Max. 95 - 100 m³/h., Max. Discharge Head: 20 mwc (2 bar)., Controls: Equipped with a heavy-duty industrial control box., The GEHO ZD-series has been the industry standard for 60 years. With this electric 400V version, you combine proven reliability with today’s technology., , Throughput capacity: 95 m3/h, Max dirt passage: 0 mm, Max. head: 20 MWK, Max dirt pa ...

bore capacity in steel (diameter): . mm throat: . mm bore stroke: . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material: Stahl Dimensions (L/W/H): verschieden mm Racks made of steel for rings or flanges up to 5500 diameter The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 870 mm turning length: 3000 mm control: Siemens type: 810 mm bed width: 620 mm turning diameter over slide: 560 mm 3 jaw chuck Forckrath: 630 mm type: 3KTN 630 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software ...

weight max.: 5 t stroke: 7000 mm clamping width: 17508 mm Height: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 68 Overhead travelling crane Demag hoist Test log available. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t stroke: 7000 mm clamping width: 10000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 38 Hubwerk Demag Inspection book available. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 40-420 mm stroke: 15-6500 mm centre height: 520 mm workpiece length: 6500 mm workpiece dia.: 1000 mm steady: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 160 mm stroke: 3025 mm centre height: 325 mm workpiece length: 3000 mm workpiece dia.: 600 mm steady: spindle drive: 32-250 U/min stroke speed: 0-20 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solu ...

turning diameter over bed: 1450 mm turning diameter over slide rest: 1000 mm turning length: 8000 mm spindle bore: 160 mm turning speeds: 2,8-560 U/min faceplate: 1400 mm 3-jaw chuck: mm bed width: 850 mm turning diameter in the gap: 1800 mm length of gap: 600 mm steady: 1070 mm steady: 1070 mm steady: 650 mm Rapid travel: chip conveyor: kW digital readout: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business ...

Technical data Type: SESOTEC Genius+ GO Search coil dimension: 700x300mm Product dimensions: 600x265 (wxh in mm) Conveyor belt length: 2,000mm Conveyor belt width: 600mm Conveyor belt height: 900+/-50mm Basic search sensitivity: FE: 1.2mm; NFE: 1.5mm; SUS: 2.0mm Search frequency: Multi-frequency Year of construction: 2026 Special features: New device Conveyor belt: link chain Conveying speed: variable Motor: Gear Motor Connection: 230V / 50Hz Excretion: Alarm and Stop Operating side: left in the direction of conveying Accessories: Paper documents

Technical data Type: SESOTEC Genius+ GO Search coil dimension: 700x400mm Product dimensions: 600x365 (wxh in mm) Conveyor belt length: 2,000mm Conveyor belt width: 600mm Conveyor belt height: 900+/-50mm Basic search sensitivity: FE: 1.5mm; NFE: 2.0mm; SUS: 2.5mm Search frequency: Multi-frequency Year of construction: 2026 Special features: New device Conveyor belt: link chain Conveying speed: variable Motor: Gear Motor Connection: 230V/50HZ Excretion: Alarm and Stop Operating side: left in the direction of conveying Accessories: Paper documents

Technical data Type: SESOTEC GLS Genius+ Search coil dimension: 500x150mm Product Dimensions: 440x115mm (LxH) Conveyor belt length: 1,500mm Conveyor belt width: 440mm Conveyor belt height: 800+/-100mm Basic search sensitivity: FE: 0.8mm / NFE: 1.0mm / SUS: 1.2mm Year of construction: 2024 Special features: new conveyor belt Conveyor belt: Gleiderkette Conveying speed: variable Motor: Gear Motor Connection: 230V / 50 Hz Excretion: Alarm and Stop Operating side: left in the direction of conveying Accessories: 1 set of test rods

Bactofuge (Bacterial removing separator). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, baseframe with feet, manometer on in / outlet, control panel (upgraded by Centrimax with Siemens S7 PLC and CE labelling) and several service tools for maintenance. It was working till the end of the production of the former dairy., Additional features:, Excluding:, - Water valves., - Sludge tank / cyclone., - Counter pressure valve., Type of Machine: Bacterial-Removing Centrifuge (Bactofuge), Capacity: 25.000 liter per hour, Bowl speed: 4.700 rpm, Motor: 37 kW

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (11 kW), base plate, feet, control panel, water valves, inlet and outlet pipes and service tools for maintenance., Additional features:, Excluding:, - Motor cover., Type of Machine: Cream Separator / Skimmer, Capacity: 5.000 - 7.000 liter per hour, Bowl speed: 6.520 rpm, Motor: 11 kW - 380 V - 50 Hz - 1460 rpm, Weight: ± 1.300 kg

Kronen GEWA5000 V, Washing machine GEWA 5000V PLUS with vibration outfeed (product outfeed over vibration screen) for bigger capacities, for example approx. 600-2500 kg per hour, depending on the product., Efficient and gentle washing of lettuces, vegetables and fruit by means of adjustable water rotation.

If you are looking for a reliable and quick response contact for your spare parts, at Dairy Machinery UK we offer a large variety of Spare Parts for the below manufactures. Keeping our ongoing assistance with our customers we have achieved best prices for genuine Spare Parts Directly From Manufactures ., Spare parts from these manufacturers, Alfa Laval Spare Parts, Tetra Pak Spare Parts, GEA Westfalia Spare Parts, GEA Tuchenhagen Spare Parts, GEA Hilge Spare Parts, GEA Niro Soavi Spare Parts, GEA Aseptomag Spare Parts, Fristam Spare Parts, Pentair Südmo Spare Parts, APV Gaulin Spare Parts, APV Rannie Spare Parts, SPX Spare Parts, Stephan Spare Parts, Karl Schnell Spare Parts, Benhil Spare Parts, Corrazza Spare Parts, Trepko Spare Parts, Ilpra Spare Parts, Grundfoss Spare Parts, Lowara Spare Parts, Arsopi Spare Parts, HST Spare Parts, Buschjost Spare Parts, Samson Spare Parts, Sumitomo S ...

Gearbox - Column Drill IBARMIA B 70 -Drilling capacity / steel approx. 70mm -Morse taper MK 5 -Spindle stroke / drilling depth approx. 270mm -Speed range 62-1120 rpm (12 gear speeds) -Automatic feeds - 6 levels (0.1-0.6 mm/turn -Projection spindle column 425mm - Table size approx. 770x660mm -Round column - Right/counterclockwise rotation -Tapping device -Coolant device -Work light -Motor power 5.6 KW -Emergency / Off -Various tools / drill chuck / quick-change mounts incl. inserts -Documentation Dimensions: LxWxH 1.1x0.7x2.7 meters / Weight 1900Kg

ID3836 Geotec Rotomax XL GTC year/Year of construction 2023 approx. 3500 hours/hours 16.5 t Geothermal drilling rig with drill rod magazine, 167 m of NS95 drill rods, and approx. 60 m of 178 mm protective casing Geothermal drilling rig, with rod magazine, 167 m NS95 drill pipe, approx. 60 m - 178 mm protective casing

Capacity: max. 1800 kg/hr, Water inlet: 2 3/4, Water outlet: 2 x 2, Infeed height: 1360 mm, Outfeed height: 1060 mm, Power: 3 x 400V, 50Hz, 5.9kW, Dimensions: 3800 x 1000 x 2000 mm, Weight: 583 kg

Used Used labeller Gernep Labetta 5-640 sk: Year: 2009 Condition: As Is Used labeller GERNEP Year: 2009 Modello: LABETTA 5-640 SK Speed: 4000 Bph Direction: Clockwise 5 Heads Nr. 2 Stazioni Adesiva per: Front label (Also suitable for wraparound label) Stamp on cap Electronic cams Regolazione testata: elettronicamente Workable formats: minimum diameter 40 mm maximum 100 mm minimum height 40 mm maximum 300mm Safety protections Code: EA 504 More details: https://bottlingscout.com

: neu : 2026 : 090194 : prompt, Zwischenverkauf v : Spanien : 22400 € : 430.08 € : 1 : 1 : 60 to : 250 mm : 5 : 40 x 11 mm : 32 1/min : 350 x 15 mm : 120 x 10 mm : 45 / 40 mm : 10 mm : max. 150x10 mm : 5.5 kW : 1850 mm : 1300 mm : 2100 mm : 1390 kg with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical Specifications & Performance DataThis bottle multiline divider with complete bottle conveyor system is designed to manage bottle flow between multiple lanes in an industrial packaging environment. Manufactured in 2009, the equipment combines an LM multiline divider with GEA Procomac bottle conveyors. The conveyor installation comprises approximately 40 meters of multiline conveyors plus the divider, providing an integrated bottle-handling section for a used bottling line.Year of manufacture: 2009Divider manufacturer: LM S.p.A.Conveyor manufacturer: GEA ProcomacConfiguration: Bottle multiline divider with complete bottle conveyor systemConveyor length: Approximately 40 meters of multiline conveyors, plus dividerContainer handling: BottlesAdvanced Automation & Control SystemsThe multiline divider forms part of a coordinated bottle transport section, directing and balancing contai ...

A washing machine for cleaning glass bottles prior to beverage filling. The soiled empty bottles are loaded into bottle baskets and pass through the system for approximately 14 minutes. First, the bottles pass through a pre-soaking bath and a lye bath in the lower section, and are then rinsed in the upper section with lye, twice with hot water, cold water and finally fresh water. The cleaned bottles are discharged onto the bottle conveyor above the bottle inlet., Additional title: single-ended machine for cleaning glass bottles, Nominal capacity: 33000 Fl/h ; mechanical control range: 13.200 - 36.000 Fl/h, Number of basket holders: 269 pcs. ; of which 259 were filled – total number of bottles: 7.770 pcs., Processing time: 14,14 min, Heating / Cooling: 1.352.712 kJ/h, Water: 7,92 m³/h, Formats: 0,5 l NRW bottles, Material: housing from stainless steel, Position: in a cabinet on legs wi ...

General SKU291Y505 LocationBarneveld MakeVMA-Getzmann TypeDispermat AE5-C Main Features MaterialStainless steel Motor1.1 KW Length325 mm Specified Features - Stirrer Stirrercheck Dissolver stirrercheck Shaft length325 mm Sizes stirring headDia. 100x 1,5 mm Number of stirrers on shaft1 Motor1,1 kW (380 V, 5100 rpm) With frequency controllercheck Speed mixing shaft115-2815 rpm Mounted on supportcheck MaterialStainless steel 1.4301 (304) General No.02868596 Year of construction1996 With switchgearcheck Floorspace0,9 x 0,8 m Total height1,5 m Weight250 kg Extra SpecificationsMax dia. Mixing vessel: 350 mmOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Oth ...

General SKU291Y535 LocationBarneveld CEcheck MakeGerstenberg Schröder Motor Motor power37 kiloWatt Pressure Working pressure50 Bar Vacuum possiblecheck Main Features MaterialStainless steel Motor37 KW Inlet diameter65 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 280 x 170 mm Teethed rotorcheck InletDN65 OutletDN80 Motor37 kW, (380 V, 1470 rpm) MaterialStainless steel 1.4571 (316Ti) General TypeRL 280/170 No.4299-2-197917 Year of construction2006 Floorspace2,00 x 0,70 m Total height0,85 m Weight850 kg Extra SpecificationsVolume 6 l., cap. 5000-10000 kg/h for oil 80%,rotormachine (pin rotor machine) for crystallisation for margarine, boter and fatty products,&:nbsp:Oils & fatOintmentsStarchCosmeticsFood additivesSugarConfectioneryBeveragesBiopharmaceuticalColloid millsAPINew arrivalsGerstenberg SchröderIndustries > Food & Feed > Oils  ...

grinding length: 600 mm grinding width: 400 mm workpiece height: 375 mm workpiece weight: 400 kg table longitudinal travel: 650 mm table speeds: 2 - 28 m/min table cross travel: 400 mm speed: 100 - 1000 mm/min grinding wheel size: 300 x 50 x 76,2 mm grinding spindle drive: 3,7 kW peripheral speed: 10 - 32 m/sec total power requirement: 11 kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 2,95 x 2,65 x 2,47 m CNC Precision Surface Grinding Machine Table drive: hydraulic Cross-axis drive: electromechanical Electromagnetic plate: 600 x 400 mm with holding force control and automatic magnetic pole reversal for demagnetizing Features: Partially enclosed, open-topped loading compartment with a sliding door Cleaning kit for cleaning the work area with hand-held impulse nozzle Holder for prism arm with single-point diamond, MK 0 Grinding spindle speed control with V-constant con ...

High-pressure clamp vise MC2 / 200 ORIGINAL PRICE: ~ $1,650.00 Description: - Body made of cast iron FCD 65, jaws made of steel - Ground on the bottom and sides - Anti-lift mechanism - Built-in pull-down mechanism - Mechanical force amplification, seal-free and maintenance-free - Short design - Clamping force can be preset Technical data: Jaw width: 200 mm Vise opening: 300 mm Jaw height: 55 mm Dimensions: 600 x 180 x 210 mm Weight: approx. 90 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 150 mm workpiece length: 1300 mm work piece width: 800 mm max. dia. of grinding wheel: 150 mm turning speed range: 0 - 2830 U/min work height max.: 945 mm milling-head swivable +/-: 180° engine output: 1.5 kW weight of the machine ca.: 230 kg. dimensions of the machine ca.: 1435 x 1100 x 1510 mm The Easy T is the cost-effective alternative to the conventional ones grinding and deburring machines. His head consisting of a grinding wheel and a flap brush, can be swiveled by 180°. Thus, a faster Switching between the aggregates possible. Due to the weight-bearing arm the head can be easily moved over the workpiece. The result is one even edge rounding. The pad also prevents slipping of the smallest components. Furnishing : - Deburring and rounding of laser-cut or stamped sheet metal parts - Grinding head, consisting of a grinding wheel & a flap brush, can be swiveled by 180°  ...

saw blade diameter: 600 x 30 mm capacity 90 degrees: round: 215 mm capacity 90 degrees: square: 195 x 195 mm capacity 90 degrees: flat: 140 x 395 mm capacity 45 degrees: round: 170 mm capacity 45 degrees: square: 170 x 170 mm capacity 45 degrees: flat: 100 x 175 mm turning speeds: 2800 U/min total power requirement: 3.0 kW weight of the machine ca.: 310 kg range L-W-H: 1077 x 1214 x 1558 mm Features: - Semi-automatic high-performance circular saw (underfloor) For cuts from 0° to 180° right and left In aluminum and light metal alloys With rising saw blade With extremely large cutting range (saw blade diameter 600 mm) Digital display for angle adjustment from 0° to 180° - Manually opening safety cover - Hydro-pneumatic saw blade feed (via two-hand operation) - 2 pneumatic vertical vices with quick adjustment - Heavy-duty cast iron construction ensures vibration-free . . operation  ...

pressure: 70.0 t punching cross-cut in cmm: 27 in 20 mm punching cross-cut in cmm: 32 in 14 mm work height max.: 1060 mm column arm: 500 mm weight of the machine ca.: 1500 kg. total power requirement: 7.0 kW range L-W-H: 1550 x 1200 x 1950 mm good / well-maintained condition () New price approx. 21.000 euros Special price on request Equipment: - electro-hydraulic hole punch, with large projection - large GEKA stop table with movable stop system - sheet metal stripper with stripper plates - stepless stroke adjustment - die base - 1x freely movable foot switch - operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 450 x 30 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 125 x 125 mm capacity 90 degrees: flat: 190x100 / 230x50 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 95 x 95 mm capacity 45 degrees: flat: 130 x 45 mm turning speeds: 2800 U/min mitre joint cuts -/+ degrees: + 45 / - 45 total power requirement: 2.2 kW weight of the machine ca.: 245 kg range L-W-H: 1600 x 750 x 1000 mm Features: - Semi-automatic high-performance circular saw (underfloor) For cuts from 45° right to 45° left In aluminum and light metal alloys With rising saw blade - Manually opening safety guard (optionally with pneumatic opening) - Hydro-pneumatic saw blade feed (via two-hand operation) - Heavy-duty cast iron construction ensures vibration-free . operation and maximum precision - Large bearing-mounted rotary table with internal indexing at 0/45° Ens ...

: gebraucht : WA0031 : 228 € : 1 : 835 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: 3.000 mm machine weight: -- kg power capacity: 90 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: / mm threading length: / mm thread pitch: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 45 mm square edge steel: 45 mm L-beam: 12 mm : 40 flat steel: 450x15 mm L-beam 90°: 152x152x13 mm : 45 mm square edge steel: 45 mm : 12 mm weight of the machine ca.: 2323 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.