ge mi fu used for sale

NEW, UNUSED LIFE BOATS , 32 PASSENGERS NORSAFE

SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (18,5 kW), water valves (original Westfalia), all inlet/outlet pipes, service tools for maintenance and a several spare parts., Additional features:, Excluding:, - Base plate and feet., - Motor cover., - Control panel., Type of Machine: Cream Separator / Skimmer, Capacity: 10.000 liter per hour, Bowl speed: 5.920 rpm, Motor: 18,5 kW - 230/460 V - 60 Hz - 1.770 rpm - 59 / 29,5 A , Dimensions: 190 x 105 x 190 cm, Weight: 1.800 kg

A large-format vacuum thermoforming machine Geiss with two window plates is available. Heating power: 360kW, connected load: 370kW, window plates: 2, min. window plate dimensions 1: 1360mm/860mm, max. window plate dimensions 1: 2460mm/1460mm, window plate adjustment 1 X/Y: 1100mm/600mm, min. window plate dimensions 2: 940mm/520mm, max. window plate dimensions 2: 2400mm/1400mm, window plate adjustment 2 X/Y: 1460mm/880mm, materials: PS/ABS/TPU/PMMA. Total system dimensions X/Y/Z: approx. 9150mm/2350mm/4000mm, total weight: approx. 15500kg, control: Siemens Simatic Panel PC, operating hours (April 2026): approx. 20100h. Documentation available. An on-site inspection is possible. Without vacuum pump, spare parts and temperature control unit. Expected to be available from October 2026.

sheet width: 1250 mm plate thickness: 1,5 mm distance between columns: 1300 mm daylight opening: 80 mm : 155 ° total power requirement: Handbetrieben weight of the machine ca.: 0,18 t dimensions of the machine ca.: 1,4 x 0,8 x 1,3 m Segment-bending machine Segment widths: 2x50mm,1x70mm,2x75mm, 2x100mm,4x150mm, 1x170m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.36 m, Overall length= 1.71 m, Overall width= 1.02 m, Net weight= 757 kg,

Unit 1 - Geiss CNC FZ 2800 x 1000 - Year of Manufacture: 2013 - Total Weight: 42.05 kN - Voltage: 400V, 3-phase + N, 50Hz - Connected Load: 25.62 kW - Rated Current: 37 Amp - Certification: CE Unit 2 - Geiss CNC FZ 2000 x 1000 - Year of Manufacture: 2012 - Total Weight: 30.22 kN - Voltage: 400V, 3-phase + N, 50Hz - Connected Load: 24.72 kW - Rated Current: 36 Amp - Certification: CE Find more here - .ucymachines/ Contact us at - sales@ucymachines

Two Geiss CNC machining centers are available. 1) Geiss FZ 2000x1000, year of manufacture: 2012, travel path X/Y/Z: 2450mm/1400mm/800mm, B-axis: 285°, C-axis: 520°, speed: 30000rpm, table dimensions X/Y: 2000mm/1000mm, machine dimensions Y/Z: 2500mm/2450mm, weight: approx. 30500kg. 2) Geiss FZ 2800x1000, year of manufacture: 2013, table dimensions X/Y: 2800mm/2000mm, weight: approx. 42000kg. The Geiss machine with the year of manufacture 2013 has spindle problems. A cost estimate is available for this. The repair can be carried out before the sale or by the buyer. Documentation available. An on-site inspection is possible. Individual sale possible.

Stamping capacity 550 kN and 280 kN Projection 130 mm or 250 mm

Big Bag, 1-place holding structure, complete with supporting hooks, Constructed in solid, painted carbon steel, single place, Machine reconditioned

Screw conveyor to collect from mixer and convey to big bag filling station, 1,5 kw motor, mounted on 2 fixed+2 pivoting wheels, adjustable discharging height 260-280 mm from ground, loading height 700 mm from ground, Used machine, reconditioned, installed power - used power in work: about 60-65% : 1,5 kw

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: GSL German Standard Lift, directional control valve -Type: 4070150000 EL -Pmax: bar -Number: 3x valve available -Price: per piece -Dimensions: 236/46/H70 mm -Weight: 2.2 kg/pc.

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: GSL German Standard Lift, directional control valve -Type: 4070030000 BK -Pmax: bar -Number: 2x valve available -Price: per piece -Dimensions: 236/46/H70 mm -Weight: 2.2 kg/pc.

GENERAL Project No.: 905713 Quantity: 1 pcs. Manufacturer: GEORG RENDER Type: W 90 TH4 WSKAT PLC Control: Siemens SIMATIC HMI Year of Make: 2017 Condition: Used machine PARTS CLEANING Cleaning medium: Water-based Front loader Max. weight per load 120 kg GENERAL TECHNICAL DATA Total power requirement 26 kVA Machine weight approx. 750 kg NOTE We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as non-binding and to check the data in detail during an inspection.

Offer 24407 Technical data: - 2 motor-driven rollers - Hydraulic. Feed of the upper roll Pressure capacity 18 t - Shaft diameter 60 mm - Shaft rotation 6 rpm - Roller diameter 215 mm - Bending performance - flat steel R 300 upright 80 x 15 mm - R 300 flat 120 x 25 mm - Square R 300 50 mm - Round tube R 900 100 x 2 mm - Drive 400 V / 1.5 kW - with: - separate control panel with digital display + foot switch - right / left – run - Lateral straightening rollers - Standard bending kit for flat and angle material - Weight approx. 1200 kg - Space requirement approx. W 1000 x H 1750 x D 1250 mm

General SKU050F242 MakeGEA Aeromatic-Fielder UK TypeTSG-2-B5-F4, Spray arm/nozzle is missing LocationBarneveld CEcheck Specified Features - Fluid bed dryer batch Material finishMirror polished inside Main Features MaterialStainless steel Volume47 Ltr. Motor3 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pan mounted on wheelsPan equipped with :non-sifting Gill plate: Capacity47 Ltr. Pan sizesø 460 x 500mm With pumpcheck Can be heated by steamcheck With fanmake Meidinger, type HA-100-M3/825 Capacity360 m³/h Motor3,0 kW, 400/690 V (IP55) With dust filtercheck MaterialStainless steel 1.4401 (316) General No.869500 Year of construction1998 With switchgear(as is) Floorspacedryer 1,2 x 0,9 m Total height3,1 m Weight2000 kg Extra Specifications- spray arm is missingPowdered foodsFluid bed dryers batchGeneric medicinesStarchBiotechnologyCa ...

Offered is a surface grinding machine (cup wheel grinder): Table surface X/Y: approx. 175mm/450mm, max. grinding length: approx. 200-250mm, max. grinding width: approx. 175mm, speed: approx. 2800rpm, weight: approx. 450kg, inspection possible by appointment.

Cleaning machine, Fabr. GM Gera, Type: Arcade, for 24,000 bph, control range 7,600 - 26,400 bph, 25 bph, cage pitch 95mm, chain pitch 140mm, with Siemens S7 control

Cleaning machine, Fabr. GM Gera, type: Arcade GEK2.1RV1, for 4,000 bph, 9 b/row, with 0.5 lt NRW bottle, cell pitch 95mm, with pre-soak, caustic bath 1+2, hot water bath 1+2, cold water and fresh water spraying, year 2007

· Speed range: 45 – 4,500 rpm, · C-axis: 360° / 0,001°, · Year of construction: 2023, · Max. turning diameter: 300 mm, · Max. workpiece length: 450 mm, Drive power: 22 kW, - Weight: about 5,000 kg

Machine data, · Manufacturer: OKUMA, · Model: GENOS L3000-e (Mx1000), · Year built: 05/2024, · Condition: Like new (only a few days of operation), · Drehbereich: ca. Ø 300 x 1.060 mm, · NC tailstock with MK5 including adjustment function, · 12 driven tool stations / C-axis, Technical highlights, · Main spindle: 22 kW, speed 38 – 3,800 rpm, · Torque: 412 Nm, · Spindle bore: Ø 80 mm, · Feed Ø 254 mm including hard and soft jaws, · Powered tools: 7 kW, 23.7 Nm, · C-axis with interpolation, · Synchronized thread drilling, · Flat guides, scraped, · Shavings conveyer, · Coolant pump approx. 4 bar, · 15 touchscreen with 3D graphics, · Windows system for data communication, · USB + Ethernet interfaces, · Manufacturer: OKUMA, · Model: GENOS L3000-e (Mx1000), · Year of construction: 05/2024, · Condition: Like new (only a few days of operation), · Torque: 412 Nm, Spind ...

GETECHA GRANULATOR RS 454-A3.11, Rotor width: 800 mm, Rotor Ø 450 mm, Rotating knives : 5 Rows (5 x 5), Stator knioves : 2 rows, Cross section ca. 600 x 800 mm, 55 kW drive, complete with soundproof case, Machine offered reconditioned, 6 month limited warranty, (photos taken before reconditioning), installed power - used power in work: about 60-65% : 55 kw, availability: immediate, working width: 800 mm, conditions: reconditioned

This 3-axis Okuma GENOS L200E-M was manufactured in 2010. It features a maximum turning diameter of 200 mm and a turning length of 380 mm. The machine is equipped with a spindle speed of 4,500 rpm and a main spindle power of 11 kW. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning machine we have for sale. Contact us for further details.

Cylindrical grinding machine manufactured in 2015. This GEIBEL & HOTZ RS 600 C features a maximum swing diameter of 275 mm and a center distance of 600 mm. It is equipped with a grinding spindle motor power of 5.5 kW and operates at speeds ranging from 700 to 2100 rpm. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ RS 600 C machine we have for sale. Contact us for further details.

Overview This labelling machine was manufactured in 2004 by the German company GERNEP. The model Labetta 4/3/12 784 2A 3SK is equipped with two wet glue stations and three self-adhesive labelling stations, offering flexible labelling configurations for a variety of bottle types. The machine has a capacity of 8,000 bottles per hour and is available immediately. Technical data  Capacity: 8,000 bph (6,500 bph with photoelectronic orientation) Number of bottle plates: 12 Number of labelling stations: 5 Station 1: Wet glue, labelling height 330 mm, steel glue roller Station 2: Wet glue, labelling height 230 mm, steel glue roller Stations 3–5: Self-adhesive Orientation: Photoelectronic bottle orientation via cap Prepared for orientation via bottle cam Electrical height adjustment Operating voltage: 400 V Frequency: 50 Hz Control unit: Siemens S7-200, Touch TD integrated Direction: Right to  ...

A complete film packaging line Georg Hartmann, consisting of a line distributor, two grouping units and a pillow pack packaging machine, is available. Packaging materials: film, Packaging capacity: approx. 30 packages/min. Documentation available. An on-site inspection is possible.

A complete compressor system is available. 1) Screw compressor German Blast 22, year of manufacture: 2011, motor power: 22kW, operating pressure: 10bar, air flow rate: 190m³/h, machine dimensions X/Y/Z: approx. 1100mm/750mm/1450mm, weight: approx. 500kg, operating hours: 27305h, load hours: 10050h. 2) Compressor Rotorcomp, max. operating pressure: 15bar, max. operating temperature: 110°C. 3) Pressure vessel IPL, year of manufacture: 1997, volume: 1000l, max. operating pressure: 10.5bar, max. operating temperature: 50°C. 4) Air dryer German Blast BT-220. 5) Water separator. Documentation available. An on-site inspection is possible.

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (17 kW), motor cover, base plate, feet and inlet/outlet pipes with flow indicator., Additional features:, Excluding:, - Water valves., - Control panel., - Service tools for maintenance., Type of Machine: Cream Separator / Skimmer, Capacity: 7.000 liter per hour, Bowl speed: 6.500 rpm, Motor: 17 kW - 380 V - 50 Hz - 1.445 rpm - 34 A , Dimensions: 170 x 120 x 175 cm, Weight: 1.300 kg

Height=1.65 m, Overall length= 1 m, Overall width= 4.06 m, Net weight= 504 kg,

Cyclon heat-insulated from the GEA brand model CYCLONE CHE 394. Year 2017. With 2 cards. Bottom outlet DN100. Top Entry Clamp 1" Clamp 1" and 4" side entrances. No documentation. Cyclon Dimensions: Length 650 mm Width 560 mm Height 1510 mm Technical characteristics Model CYCLONE CHE 394 Year of manufacture 2017 Equipment dimensions INTERIOR BODY WIDTH 560 INNER BODY LENGTH 650 INTERIOR HEIGHT BODY 1510 Transportation Information Length 2150 mm Width 992 mm Height 1100 mm Documentation No documentation Status In your state Manufactured by GEA WESTPHALIA

General SKU328X701 MakeGeiger Maschinebau AG LocationBarneveld CEcheck TypeD-1200-K/3SWFK Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck MaterialMild steel General No.6040 Year of construction2007 Extra Specificationscapacity:&:nbsp:3900 l/hchain hoist, load cap. 3 ton.hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar1 pan (press vessel) is includedOils & fatPaints & coatingsDissolversPlastic & polymersSolventsDetergent & surf.Food additivesLubricants & oleoDairyAnimal feedBeveragesDyes & pigmentsGeigerIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsMixers > DissolversIndustries > Chemical > Plastic & polymersIndustries > Chemical > SolventsIndus ...

General SKU328X703 LocationBarneveld CEcheck Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck MaterialMild steel General MakeGeiger Maschinebau AG TypeD-1200-K Total height5,0 m Extra Specificationscapacity:&:nbsp:3900 l/hchain hoist, load cap. 3 ton.hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar1 pan (press vessel) is includedOils & fatPaints & coatingsDissolversPlastic & polymersSolventsDetergent & surf.Food additivesLubricants & oleoDairyAnimal feedBeveragesDyes & pigmentsGeigerIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsMixers > DissolversIndustries > Chemical > Plastic & polymersIndustries > Chemical > SolventsIndustries > Chemical > Det ...

General SKU328X699 LocationBarneveld CEcheck MakeGeiger Maschinebau AG Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck MaterialMild steel General Type1200-HSK Year of constructionD-1200-K/3SWFK Total height5,0 m Extra Specificationscapacity:&:nbsp:3900 l/hchain hoist, load cap. 3 ton.hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar1 pan (press vessel) is includedOils & fatPaints & coatingsDissolversPlastic & polymersSolventsDetergent & surf.Food additivesLubricants & oleoDairyAnimal feedBeveragesDyes & pigmentsGeigerIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsMixers > DissolversIndustries > Chemical > Plastic & polymersIndustries > Chemical > ...

General SKU328X702 MakeGeiger Maschinebau AG LocationBarneveld CEcheck TypeD-1200-K/3Sw Pressure Working pressure pans2.7 Bar Main Features MaterialMild steel Volume1200 Ltr. Motor2.1 KW Specified Features - Dissolver With covercheck Capacity1200 l. Pan sizesDia. 1200x1300 mm Outletcheck With mechanical liftingcheck MaterialMild steel General No.5480 Year of construction1995 Extra Specificationscapacity:&:nbsp:3900 l/hchain hoist, load cap. 3 ton.hydraulic unit, 0,55kW, 230/400V.work pressure till 200 bar1 pan (press vessel) is includedOils & fatPaints & coatingsDissolversPlastic & polymersSolventsDetergent & surf.Food additivesLubricants & oleoDairyAnimal feedBeveragesDyes & pigmentsGeigerIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsMixers > DissolversIndustries > Chemical > Plastic & polymersIndustries > Chemical > SolventsIndustr ...

Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machin ...

Used 5-stage evaporation station by Gea Wiegand. Year of construction 1986. Capacity 10000 L/h. Reconditioned in 2008 with exchangers + computer control by B&P. Also added in the same year was an aroma column built by B&P and designed by Dipl Ing K.H. Volp.

Labelling Machine GERNEP Labetta 7500 bph Fully automatic cold glue labelling machine for glass bottles and jars from the first owner, machine made by German Gernep in 2013 and having only 9512 operating hours as a labeller. This labeller has three cold glue label magazines for pre-cut paper labels (neck, front and back, now preserved in storage and a part of delivery scope). It covers all traditional equipment requirements of containers made from glass and PET. The combination of well-tried technologies such as stainless steel glue roller, rubberised and adjustable glue palettes, divided glue scraper knife with glue-saving fine adjustment of the glue thickness, overlay gearbox for exact label positioning. Labeller has been maintained well and last full overhaul (EUR 19’500) was made in the end of 2019. All air driven glue pumps are changed to electric drive pumps and it has stainl ...

Key data: 2400 KW, 400 V

CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...

Inv. Num. : 9116 Type: PARAGON CUTTER Producer: GERBER Created: 2022 Parameters: Load capacity: 100 kg Max. material width: 2200 mm Top table length: 16800 mm Equipment: GERBER XLs125 SPREADER

electric motor, three-phase motor -Manufacturer: ATB Nordenham, explosion-proof electric motor -Type: CD 90L2-8 -Power: 0.55 kW -Speed: 690 rpm -Shaft: Ø 14 x 30 mm -Design: B14 -Protection class: IP55 -Terminal box: EAR 80 -Number: 2x motors available -Price: per piece -Dimensions: 345/176/H270 mm -Weight: 32.1 kg/pc.

A compact Getecha edge trim granulator is available. Inlet opening X/Y: 254mm/305mm, drive power: 3.7kW. An on-site inspection is possible.

Krones Wet Aseptic PET Bottle Filling Line – 36,000 bph (500 ml) The Krones wet aseptic filling line is designed for the production of carbonated and still beverages, including soft drinks and juices, using a wet aseptic process. The line supports flexible bottle formats of 0.33 L, 0.5 L, 1.0 L, and 1.5 L, with a maximum output of 36,000 bottles per hour at the 0.5 L format. The system is compatible with 28 mm closures, including PCO 1810 flat caps and sport caps, ensuring high hygiene standards and reliable, high-quality filling performance. The line is complete and was originally installed by Krones in 2009. In 2016, the line was upgraded with a KHS Blowmax stretch blow molder and a Krones Modulpal palletizer. The line has been continuously serviced by Krones and is currently in very good condition. Main Characteristics: Manufacturer Krones AG and KHS Manufacturing yea ...

GEA Niro Soavi NS2002H Laboratory Homogenizer – 30 L/h – 60 MPa – 2009, The GEA Niro Soavi NS2002H is a compact, high‑pressure laboratory homogenizer designed for R&D, pilot trials and small‑scale production. This 2009 unit is in very good condition and offers a processing capacity of up to 30 L/h (30 dm³/h), depending on product and pressure., With a working pressure up to 60 MPa (600 bar), the NS2002H delivers efficient particle size reduction and stable emulsions, making it ideal for demanding formulations and scale‑up work., Key Features, • Model: GEA Niro Soavi NS2002H, • Year of manufacture: 2009, • Capacity: up to 30 L/h (product and pressure dependent), • Working pressure: up to 60 MPa (600 bar), • Laboratory / bench‑scale design – compact and easy to install in R&D labs, • Stainless steel product contact parts for hygiene and corrosion resistance, � ...

Grain sampler type 1938 DRP, 1 litre sampler, in a wooden case Newly calibrated in 2025, valid until 2029! Complete with tripod (lower part), hollow measure, filling tube, knife, flow weight, scale with tripod and weight tray Weight set (3x200g, 100g, 2x50g, 2x20g, 10g, 5g, 2x2g, 1g, 500mg). Good condition, checked and adjusted by a specialist laboratory. Scales and weights are calibrated only according to customer requirements Operating regulations and official boards are enclosed

This 3-axis Okuma Genos L300 E-M was manufactured in 2014. It features a maximum turning diameter of 300 mm and a turning length of up to 1000 mm. The machine is equipped with a spindle speed of up to 3800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma Genos L300 E-M CNC lathe we have for sale. Contact us for further details.

Evaporator GEA KUBA -Type: SGBE 63-F62 -Cooling capacity: 33.3 kW at DT8, 26.6 kW at DT7 -Fin spinning: 7 mm -Electric heating -Fans: 2 x 630 mm -Dimensions: 3020 x 1000 x 1000 mm -Block made of stainless steel -Refrigerant: Freon -Volume: 45 L -Quantity in stock: 1 -Stock number: CH 597 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work