ge mi fu used for sale

Height=1.9 m, Overall length= 1.3 m, Overall width= 3.5 m, Net weight= 1110 kg,

Height=2.12 m, Overall length= 0.9 m, Overall width= 2.3 m, Net weight= 1110 kg,

Height=2.03 m, Overall length= 0.75 m, Overall width= 2.12 m, Net weight= 815 kg,

Height=2.12 m, Overall length= 0.9 m, Overall width= 2.4 m, Net weight= 1035 kg,

Height=2.51 m, Overall length= 1.3 m, Overall width= 3.25 m, Net weight= 1750 kg,

Height=2.2 m, Overall length= 1.15 m, Overall width= 2.05 m, Net weight= 1535 kg,

CONVEYOR BELTS, for waste material and more, sturdy steel structure, constructed in a workman like manner, Italian quality and components, can be lined in PVC, RUBBER or SHUTTER TYPE BARS, Can be prepared and fitted for METAL DETECTORS, and completed with OVERBELT METAL SEPARATORS, Size and characteristics bespoke to the project., Just fill your enquiry with the following data:, - Materials to be transported (photos appreciated), - Quantity in Tons/h, - required working width, - total length, - horizontal length, - diagonal length, - heigh of discharging point, - if prepared for metal detecto, - if fitted with metal detector (in this case, please add maximum contamination size), - if positioned in covered/uncovered place, We will send you a most targeted offer.

GEA Niro NS2006P piston homogeniser Serial: 6233 2005, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph

GEA Niro Ariete NS2006P piston homogeniser Serial: 12590 2016, Stainless, Max Press. (Mpa) 25, rated flow rate 150 dm3/h, 3Ph, with box of spares

DUAL-SHAFT HYDRAULIC SHREDDER, Loading hopper, Sturdy supporting structure in carbon steel, shredding surface 1.300 x 960 mm ca, 2 counter-rotating steel shafts, 75 mm thick knives, 2 hooks, max speed 18 rpm, planetary gearbox, Hydraulic motor 90 kw (120Hp) 400 V/50 Hz (can be fitted with a 75 kw drive), hydraulic power unit,, 400 lt. oil tank, automatic overload reversal with programmable number of reverse cycles, control panel with electronic system to set maximum number of inversions, cooling fan, Complete with electrical drawings, user manual, CE compliance, Possible addition of loading and extraction belt with magnetic separator, width: 1.300mm, availability: 70 days ca, conditions: reconditioned, Power: 90 kw

DUAL-SHAFT HYDRAULIC SHREDDER, shredding surface 1.000 x 850 mm ca, including loading hopper, Sturdy supporting structure in carbon steel, 2 counter-rotating steel shafts, n.20 x 50mm.thick knives (or bespoke), Hydraulic motor 37 kw, 400 V/50 Hz, hydraulic power unit,, 200 lt. oil tank, control panel, automatic overload reversal with programmable number of reverse cycles, Complete with electrical drawings, user manual, CE compliance, Possible addition of loding and extraction belt with magnetic separator, width: 1.000 mm, availability: 150 days ca, conditions: reconditioned, Power: 37 kw, Special Features: Interesting prices for these IT shredders, starting from 135 k€ for a hydraulic machine

saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 x 95 mm capacity 90 degrees: flat: 180 x 95 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 95 x 95 mm capacity 45 degrees: flat: 125 x 95 mm capacity 60 degrees: round: 90.0 mm capacity 60 degrees: square: 90 x 90 mm capacity 60 degrees: flat: 90 x 90 mm 0: 15 / 30 / 45 / 90 U/min total power requirement: 1.8 / 2.5 kW weight of the machine ca.: 375 kg range L-W-H: 1000 x 1100 x 1870 mm Equipment / description: - Manual high-performance vertical circular saw - for cuts from 45 ° right to 60 ° left - The saw head is on pretensioned linear guides - guided on a stable cast steel column - The powerful 2-stage gear was specially designed for cuts designed in solid material - The user has a total of 4 blade speeds - available for optimal adaptation to the material - The larg ...

Key data: 1100 mm, 1 t

Paternoster for sheet metal coils 7 gondolas, each with a usable width of 110 cm Load capacity 1300 kg Net weight 800 kg Height 235 cm

We are offering for sale a Robotic 3D welding station consisting of a welding robot and two rotary tables. Manufacturer: Gernert Schweißtechnik Model: OTC DR 4200L Year of Manufacture: 2001 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Height=1.8 m, Overall length= 1.9 m, Overall width= 0.85 m, Net weight= 640 kg,

Height=1.68 m, Overall length= 2.52 m, Overall width= 0.69 m, Net weight= 220 kg,

Height=1.52 m, Overall length= 3.85 m, Overall width= 0.95 m, Net weight= 600 kg,

GEA-INTEDAS vertical tank made of AISI 304L stainless steel. On legs. Capacity: 6000l. 4 lower outputs and 1 upper entrance. With aeration valve and top manhole cover. Atmospheric. Design temperature: 90º. Previous use: mains water. Series No.: 10D100. Dimensions: Diameter: 1500mm. Height 5280mm.

Vertical tank made of AISI 304L stainless steel. Manufacturer: CALDERINOX. On legs. Capacity: 40,000 l. Top and bottom entrances. Mineral wool insulation. Atmospheric. Design temperature: 85º. Use

G+H precision external cylindrical grinding machine RS 600 CNC / P for machining multiple diameters in a single setup, in plunge or oscillating mode. Grinding table driven by a digital servo axis, ball screw with a 10 mm pitch, axis speed 0.01 mm/min - 15 m/min, positioning via linear scale, resolution 0.001 mm, V-flat slide guide, guideways are Turcite-B coated. Disc feed support driven by a digital servo axis, ball screw with a 5 mm pitch, axis speed 0.01 mm/min - 10 m/min, positioning via linear scale, resolution 0.0005 mm, V-flat slide guide, guideways are Turcite-B coated. Workpiece headstock with digital servo spindle, positionable with initiator for detecting the reference mark, adjustable 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm. Center height  ...

G+H precision finishing machine FI 600 for machining multiple diameters in one setup., Feed table driven by digital servo axis, ball screw with 5 mm pitch, axis speed 0.01 mm/min – 15 m/min, positioning via internal encoder, resolution 0.001 mm, mechanical cylindricity adjustment +10° - 4°, V-flat slide guide, guideways are Turcite-B coated., Z-table movable for positioning a sword finisher, The Nagel finishing head is provided by the customer. Workhead with digital servo spindle, positionable with an initiator for detecting the reference mark, adjustable from 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm, center height 140 mm., Full-room machine enclosure, approximately 2.3 m high, open on the sides, with integrated loader. Front sliding door electrica ...

honing diameter: 45 mm stroke: 1000 mm throat: mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 4 spindle honing machine for guns Honing area according to the manufacturer: Diameter 5-45mm Maximum Honing Length 750mm Accessories: Honing tools for diameter: -10mm -12,3mm -13,3mm -21,1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 350 mm

G+H (Geibel + Hotz), FS 635 SA Built in 1997 Grinding area 600x350 Weight: approx. 2,600 kg

GETRA STRAPPING MACHINE - IN WORKING ORDER - SUPPLIED WITH 10 SPOOLS OF STRAPPING

Tool trolleys in various sizes and designs from Gedore & Orion

gebr. Types - Circular saw, Fabr. Gema, Type HGB Accessories: Vise

A GM Gera bottle cleaning system is available. Throughput capacity with 1l PET bottles: 13000 bottles/h, bottle cells: 3240 pieces, cells per basket row: 18, cell pitch: 110mm, chain pitch: 169mm, total treatment time: approx. 15min, total immersion time: approx. 7.5min, housing material: stainless steel (SST). System dimensions X/Y/Z: approx. 8900mm/4200mm/3350mm, weight: approx. 23650kg, operating hours (09.2025): approx. 14300h. Documentation available. An on-site inspection is possible. Expected to be available from mid-March 2026.

Inv. Num. : 8708 Type: GENOS L3000-e Producer: OKUMA Created: 2021 Parameters: Switch-on hours: 7963 h Hours: 4206 h Maximum turning length: 500 mm Max. turning diameter: 300 mm Maximum main spindle power: 22 kW Maximum spindle speed: 3800 1/min Number of all tools: 12 pieces Weight: 7700 kg Equipment: C-axis Y-axis CNC tailstock Tool probe Powered tools VDI Holder Powered Tool Holders (5 pieces)

KRONEN GEWA 2600V – Fully Refurbished Vegetable Washing Machine, We are offering a Kronen GEWA 2600V vegetable washing machine in excellent condition, fully refurbished and ready for immediate use., Refurbishment Details:, - Completely overhauled by professionals, - Fitted with a brand-new original pump, - All parts inspected, cleaned, and tested, - Machine runs smoothly and efficiently, Features:, - Efficient vegetable and salad washing system, - Gentle product handling through whirl washing principle, - Made of high-quality stainless steel, - Ideal for food processing companies, - Location: Emmeloord, Available Immediately, Invest in a high-quality machine with the reliability of KRONEN – now with the added value of a full refurbishment and a new pump!, For more information, photos, or to schedule a viewing, please contact us.

BUFFER SILO 15.000 lt. (or 8.000 - 12.000 - or bespoke), barrel Ø 2,2 mt. - height 3.0 mt., overall height 5,23 mt, made in electro-welded carbon steel sheet, sturdy supporting structure, internal rotor with spiral and agitator arms, inspection hatch on barrel wirh safety devices, bonfiglioli gearbox, power 3 kw electric motor, transmission with elastic coupling, finish painted externally with rustproofing and enamel, CE compliance + instruction manual, installed power - used power in work: about 60-65% : 3

DRAINING AUGER, construction in aisi 304 stainless steel,, case diameter (U-shape) 380 mm, total length 4.500mm,, internal stainless steel spiral diam. 230mm,, drainage with stainless steel perforated plate L=3.500 mm,, nr.6 hinged side doors,, gear motor power 2.2 kw, installed power - used power in work: about 60-65% : 2.2

Gericke CSM centrifugat rotary sifter Stainless steel Year 1998 CM 215009

A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.

Manufacturer: Wurz Energy Year of Manufacture: 2009 Type of Machine : 340 CHP (Combined Heat and Power) Diesel Generator Set Electrical Power: 340 kW each Thermal Power: 346 kW each Engine: SCANIA DC16-RP Control System: SIEMENS / SCANIA CAN BUS Fuel Consumption: up to 245 g/kWh Fuel: palm oil, rapeseed oil, biodiesel, diesel Operating Hours: 10–13 each (maintenance only) Condition: New, unused Container: 20 ft, approx. 9,500 kg each Find more here - .ucymachines/ Contact us at - sales@ucymachines

Modular vise, jaw width 125mm Gerardi Modular 125 Stable Machine Vise, Drill Vise Total length approx. 345mm Clamping range approx. 150mm Jaw width 125mm with pull-down jaws Additional prism jaw Mechanical clamping actuation with 19mm wrench or ratchet The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

PowerPak 560 packaging machine for soft and hard film, fully equipped (cross-cutting, cross-cutter, longitudinal crushing knife, perforating device, and standard longitudinal cutting) features two movable labelers (top and bottom web) 510 mm wide x 590 mm long for pre-feeding 30 A 20 kW Triolabel printing device, Machine designation: GEA Powerpack 560, Construction year: 2017, Mains connection: 3/N/PE 400V 50/60 Hz, Circuit diagram number: ELTL170300

weight max.: 3 t clamping width: 480 / 880 mm adjustment range - horizontal: 400 mm adjustment range - vertical: 600 mm total power requirement: - kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 0,60,41,1 m Shipping weight: 300 kg Packing: ca. 1,2 x 0,7 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

blowers Müro block glue presses; Condition used; 2 pcs.; 1x old connector, 1x new connector; cleaned and checked for function. Heater Müro padding press; condition used; two pic.; one old connector, one with new connector; cleaned and checked on function.

Screw Diameter: 130 mm // Throughput: 800 kg/h

Material : ABS. PST, PC, PETG, PMMA // Forming Area (Vxh): 1100x900

Key data: 1050 mm, 560 mm, 460 mm

Table size 1300 x 560 mm Tool Stations 32 Control: Okuma OSP-P 20 M Serial Number: 155968 Year of manufacture: 2011, retrofitted 2022 Accessories: Chip conveyor 4th axis, 0-point clamping plate 1 hinged quill

Key data: 1050 mm, 560 mm, 460 mm

incl. Robojob Mill-Assist Manufacturer: Okuma Type: Genos M 560-V-e Travels: X: 1050 mm, Y: 560 mm, Z: 460 mm Table size 1300 x 560 mm Maximum table load: 900 kg Tool Stations 32 Control: Okuma OSP-P 300Ma-e (NC-controlled) Serial number: 0712-101084 Year of manufacture: 2018 Accessories: Chip conveyor High pressure pump 15 bar, Internal cooling pneum. Peeping tom loading door, Automation: Robojob Mill-Assist Essential Robot interface Length probe Renischaw

Circular screen feeder with a maximum filling volume of 1,000 l.; Motor power spread arm: 15 kW; Motor power turntable: 0.55 kW. Container diameter: 1200 mm; Plate diameter: 1600 mm; Hopper diameter at the top: 1400 mm. Discharge height: Approx. 730 mm; Screen height: 300 mm / Perforations: 30 x 15 mm (oval). Spreading arm provided with scraper plates made of Hardox. The scope of delivery includes a control cabinet with frequency converters for regulating the speeds of the platter and spreading arm.

General SKU251W327 MakeRKR Gebläse und Verdichter GmbH LocationBarneveld TypeK130-78/D300 Pressure Pressure buildup0.5 Bar Main Features Capacity83.33 m3/Min Motor110 KW Pressure0.5 Bar Specified Features - Blower Blowercheck Capacity75,0-83,33 m³/min Motor110 kW, 400/690 volt, 1488 rpm With air filtercheck InletDia. 300 mm OutletDia. 250 mm MaterialMild steel General No.903603/08 Year of construction2008 Mounted on framecheck Floorspace1,25x3,15 m Total height1,95 m Weight1830 kg Extra SpecificationsThis machine was overhauled in 06-2019.&:nbsp:&:nbsp:The documentation of the work carried out during the overhaul is available.&:nbsp:&:nbsp:This machine is also supplied with a sound-proof enclosure.&:nbsp:&:nbsp:BlowersRKR Gebläse und verdichter GmbHBlowers > BlowersBrand > RKR Gebläse und verdichter GmbH What you can expect from Foeth: -- Machine is in work ...

General SKU379W1142 LocationBarneveld Pressure Working pressure15 Bar Main Features MaterialStainless steel Volume180000 Ltr. Motor4.6 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity180m³/h With motor4,6 kW, 380 volt, 2890 rpm InletDN50 OutletDN50 With jacketcheck Centrifugal Pumps MaterialStainless steel 1.4401 (316) General MakeGea Tuchenhagen TypeVPB32 L Mach.No.B3292244 Mounted on wheelscheck With switchcheck Floorspace1,50x0,50 m Total height1,40 m Extra SpecificationsWith flow meter, pressure gauge, manual valvesOils & fatPaints & coatingsCentrifugal PumpsFine chemicalsOther chemicalAgrochemicalsRubberBiotechnologyPlastic & polymersCatalysts & fillersSolventsDetergent & surf.CosmeticsLubricants & oleoDairyBeveragesDyes & pigmentsAPIMinerals & inorganicGEA TuchenhagenIndustries > Food & Feed > Oils & fatIndustries > Chemical ...

General SKU339W1250 MakeJenkins heat exchangers ( mersen) LocationBarneveld TypeGEKBH-7MK1A Pressure Working pressure7 Bar Working pressure shell7 Bar Working pressure tubes7 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface4.4 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Heating surface4,4m² Tube capacity10l Max. temperature-30/+165°C Shell capacity22l Max. temperature-30/+165°C MaterialGraphite General No.7605 Year of construction2001 Floorspace0,85x0,6 m Total height0,6 m Weight500 kg Extra Specificationsblock heat exchanger.Phenolic resin impregnated extruded graphite.Oils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologyPlastic & polymersShell and tube heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pha ...

General SKU396U1165 MakeGerteis Maschinen Processingeneering AG LocationBarneveld CEcheck Type1-W-POLYGRAN 250/240 Main Features MaterialStainless steel Width230 mm Specified Features - Sieve granulator Granulating sievecheck Rotor sizesdia. 240 x 230 mm Sieve sizesdia. 250 x 230 mm Sieve perforation1,5 mm With hopper50 ltr. InletDia. 315mm Motor400 volt (servo motor) With variable speed drivecheck Speed20-180 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) General No.1065 Year of construction1997 Mounted on wheelsrail system With switchgearcheck Floor space1,30 x 0,85 m Total height1,60 m Weight520 kg Extra SpecificationsSpeed left and right 20-180 rpm, typical 75 rpm,rotation angle left and right 0/720 degrees, typical 270 degrees.Powdered foodsSieve granulatorsFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesC ...

General SKU201W009 MakeGEA Aeromatic-Fielder/ GEA Niro Pharma Systems TypeMulti Processor MP1-1-F1 No.02563.0010 / 15104 / RYDR001 Year of construction2003 LocationBarneveld Pressure Sprayercheck Main Features MaterialStainless steel Volume12 Ltr. Motor11 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck Coatercheck Granulatorcheck With pancheck Capacity6 – 12 l. Pan sizesA: ø 120 x 480 mm: B: ø 170 x 280 mm Capacity6 liter pan: ±1–2 kg of product: 12 liter pan: ±2–4 kg of product With sprayercheck With sprayer on bottom of pancheck With pumpcheck With Wurster-pancheck Can be heated by steamcheck With fancheck Capacity580 m³/h Motor11 kW (400V Ex) With dust filtercheck Cleaning with air pulsecheck MaterialStainless steel 1.4404 (316L) General With switchgear(as is) CEcheck Extra SpecificationsGEA Aeromatic-Fielder Multi Proces ...

General SKU292N352 MakeGericke ag Mounted on framecheck Main Features MaterialStainless steel Specified Features - Silo Silocheck Closedcheck Diameter1000mm Cylindrical height1500mm Conical height800mm Flat topcheck Inlettangential, (1x) 80mm Top connectionssystemfilter 4206 0306/10-2 OutletGericke RA 550, dia.200mm MaterialStainless steel General LocationBarneveld Floorspace1,3x1,3 M Total height3,2 M Weight500 KGPaints & coatingsPowdered foodsOintmentsFine chemicalsStarchAgrochemicalsRubberPlastic & polymersCatalysts & fillersFeed additivesSilosDetergent & surf.SugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicGerickeIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > Agroc ...

General SKU321U762 LocationBarneveld MakeGea TypeVT 40 DS CDL-C-16 Pressure Working pressure10 Bar Main Features MaterialStainless steel Surface77 m2 Size length1300 mm Sizes width525 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface77 m² Capacity116.31 Ltr. (zone A and B) Number of platens124 Plate sizes615x1016 mm ConnectionsDN100 (4x) Max. temperature100 °C MaterialStainless steel 1.4306 (304L) General No.171/23406 Year of construction07.2020 Floorspace0,53 x 1,30 m Total height1,60 m Weight1135 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlastic & polymersPlate heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAni ...